/* Copyright 2024 Joshua Bakita
 * SPDX-License-Identifier: MIT
 */

#include <linux/device.h>  // For struct device, bus_find_device*(), struct bus_type
#include <linux/interrupt.h> // For hooking the nvidia driver interrupts
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>  // For PCI device scanning
#include <linux/proc_fs.h>  // So we can set up entries in /proc

#include "nvdebug_linux.h"
#include "stubs.h"

// Enable to intercept and log GPU interrupts. Historically used to benchmark
// interrupt latency.
#define INTERRUPT_DEBUG 0

// MIT is GPL-compatible. We need to be GPL-compatible for symbols like
// platform_bus_type or bus_find_device_by_name...
MODULE_LICENSE("Dual MIT/GPL");
MODULE_AUTHOR("Joshua Bakita");
MODULE_DESCRIPTION("A scheduling debugging module for NVIDIA GPUs");

// runlist_procfs.c
extern struct file_operations runlist_file_ops;
extern struct file_operations preempt_tsg_file_ops;
extern struct file_operations resubmit_runlist_file_ops;
extern struct file_operations disable_channel_file_ops;
extern struct file_operations enable_channel_file_ops;
extern struct file_operations switch_to_tsg_file_ops;
// device_info_procfs.c
extern struct file_operations device_info_file_ops;
extern struct file_operations nvdebug_read_reg32_file_ops;
extern struct file_operations nvdebug_read_reg_range_file_ops;
extern struct file_operations local_memory_file_ops;
// copy_topology_procfs.c
extern struct file_operations copy_topology_file_ops;

struct nvdebug_state g_nvdebug_state[NVDEBUG_MAX_DEVICES];
unsigned int g_nvdebug_devices = 0;
// Bus types are global symbols in the kernel
extern struct bus_type platform_bus_type;

// Starting in Kernel 5.6, proc_ops is required instead of file_operations.
// As file_operations is larger than proc_ops, we can overwrite the memory
// backing the file_operations struct to follow the proc_ops layout, and then
// cast on newer kernels.
#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,6,0)
const struct proc_ops* compat_ops(const struct file_operations* ops) {
	struct proc_ops new_ops = {};
	new_ops.proc_open = ops->open;
	new_ops.proc_read = ops->read;
	new_ops.proc_write = ops->write;
	new_ops.proc_lseek = ops->llseek;
	new_ops.proc_release = ops->release;
	memcpy((void*)ops, &new_ops, sizeof(new_ops));
	return (struct proc_ops*)ops;
}
#else
const struct file_operations* compat_ops(const struct file_operations* ops) {
	return ops;
}
#endif

#if INTERRUPT_DEBUG
irqreturn_t nvdebug_irq_tap(int irq_num, void * dev) {
	printk(KERN_INFO "[nvdebug] Interrupt tap triggered on IRQ %d.\n", irq_num);
	return IRQ_NONE; // We don't actually handle any interrupts. Pass them on.
}
#endif // INTERRUPT_DEBUG

// Find any and all NVIDIA GPUs in the system
// Note: This function fails if any of them are in a bad state
int probe_and_cache_devices(void) {
	// platform bus (SoC) iterators
	struct device *dev = NULL;
	struct device *temp_dev;
	// PCI search iterator and search query
	struct pci_dev *pcid = NULL;
	// This query pattern is mirrored off nouveau
	struct pci_device_id query = {
		.vendor = NV_PCI_VENDOR,  // Match NVIDIA devices
		.device = PCI_ANY_ID,
		.subvendor = PCI_ANY_ID,
		.subdevice = PCI_ANY_ID,
		.class_mask = 0xff << 16,
		.class = PCI_BASE_CLASS_DISPLAY << 16,  // Match display devs
	};
	int i = 0;
	// Search the platform bus for the first device that matches our name
	// Search for GA10B (Jetson Orin)
	while (!dev && (temp_dev = bus_find_device_by_name(&platform_bus_type, dev, "17000000.ga10b")))
		dev = temp_dev;
	// Search for GV11B (Jetson Xavier)
	while (!dev && (temp_dev = bus_find_device_by_name(&platform_bus_type, dev, "17000000.gv11b")))
		dev = temp_dev;
	// Search for GP10B (Jetson TX2)
	while (!dev && (temp_dev = bus_find_device_by_name(&platform_bus_type, dev, "17000000.gp10b")))
		dev = temp_dev;
	// Search for GM20B (Jetson TX1)
	while (!dev && (temp_dev = bus_find_device_by_name(&platform_bus_type, dev, "57000000.gpu")))
		dev = temp_dev;
	// TODO: Support other platform bus devices (gk20a - TK1)
	if (dev) {
		mc_boot_0_t ids;
		g_nvdebug_state[i].g = get_gk20a(dev);
		g_nvdebug_state[i].regs = gk20a_regs(g_nvdebug_state[i].g);
		if (!g_nvdebug_state[i].regs)
			return -EADDRNOTAVAIL;
		ids.raw = nvdebug_readl(&g_nvdebug_state[i], NV_MC_BOOT_0);
		if (ids.raw == -1)
			return -EADDRNOTAVAIL;
		g_nvdebug_state[i].chip_id = ids.chip_id;
		g_nvdebug_state[i].pcid = NULL;
		g_nvdebug_state[i].bar3 = NULL;
		g_nvdebug_state[i].dev = dev;
		printk(KERN_INFO "[nvdebug] Chip ID %x (architecture %s) detected on platform bus and initialized.",
		       ids.chip_id, ARCH2NAME(ids.architecture));
		i++;
	}
	// Search the PCI bus and iterate through all matches
	// FIXME: State rollback
	while ((pcid = pci_get_dev_by_id(&query, pcid)) && i < NVDEBUG_MAX_DEVICES) {
		mc_boot_0_t ids;
		g_nvdebug_state[i].g = NULL;
		// Map BAR0 (GPU control registers)
		g_nvdebug_state[i].regs = pci_iomap(pcid, 0, 0);
		if (!g_nvdebug_state[i].regs) {
			pci_err(pcid, "[nvdebug] Unable to map BAR0 on this GPU\n");
			return -EADDRNOTAVAIL;
		}
		// Map BAR3 (CPU-accessible mappings of GPU DRAM)
		g_nvdebug_state[i].bar3 = pci_iomap(pcid, 3, 0);
		// Try mapping only the lower half of BAR3 on fail
		// (vesafb may map the top half for display)
		if (!g_nvdebug_state[i].bar3)
			g_nvdebug_state[i].bar3 = pci_iomap(pcid, 3, pci_resource_len(pcid, 3)/2);
		g_nvdebug_state[i].pcid = pcid;
		g_nvdebug_state[i].dev = &pcid->dev;
		ids.raw = nvdebug_readl(&g_nvdebug_state[i], NV_MC_BOOT_0);
		if (ids.raw == -1) {
			pci_err(pcid, "[nvdebug] Unable to read config from Master Controller on this GPU\n");
			return -EADDRNOTAVAIL;
		}
		g_nvdebug_state[i].chip_id = ids.chip_id;
		printk(KERN_INFO "[nvdebug] Chip ID %x (architecture %s) detected on PCI bus and initialized.",
		       ids.chip_id, ARCH2NAME(ids.architecture));
#if INTERRUPT_DEBUG
		if (request_irq(pcid->irq, nvdebug_irq_tap, IRQF_SHARED, "nvdebug tap", pcid)) {
			printk(KERN_WARNING "[nvdebug] Unable to initialize IRQ tap\n");
		}
#endif // INTERRUPT_DEBUG
		i++;
	}
	// Return the number of devices found
	if (i > 0)
		return i;
	return -ENODEV;
}

// Create files `/proc/gpu#/runlist#`, world readable
// Support: Fermi, Maxwell, Pascal, Volta, Turing
int create_runlist_files(int device_id, struct proc_dir_entry *dir) {
	ptop_device_info_gk104_t info;
	struct proc_dir_entry *rl_entry;
	int i, rl_id;
	char runlist_name[12];
	int max_rl_id = 0; // Always at least one runlist
	// Figure out how many runlists there are by checking the device info
	// registers. Runlists are always numbered sequentially, so we just have
	// to find the highest-valued one and add 1 to get the number of runlists.
	for (i = 0; i < NV_PTOP_DEVICE_INFO__SIZE_1_GK104; i++) {
		info.raw = nvdebug_readl(&g_nvdebug_state[device_id], NV_PTOP_DEVICE_INFO_GK104(i));
		if (info.info_type != INFO_TYPE_ENUM || !info.runlist_is_valid)
			continue;
		if (info.runlist_enum > max_rl_id)
			max_rl_id = info.runlist_enum;
	}
	// Create files to read each runlist. The read handling code looks at the
	// `pde_data` associated with the file to determine what the runlist ID is.
	for (rl_id = 0; rl_id <= max_rl_id; rl_id++) {
		snprintf(runlist_name, 12, "runlist%d", rl_id);
		rl_entry = proc_create_data(
			runlist_name, 0444, dir, compat_ops(&runlist_file_ops),
			(void*)(uintptr_t)rl_id);
		if (!rl_entry)
			return -ENOMEM;
	}
	return 0;
}

// Create files `/proc/gpu#/gpc#_tpc_mask`, world readable
// Support: Maxwell+
int create_tpc_mask_files(int device_id, struct proc_dir_entry *dir) {
	struct nvdebug_state* g = &g_nvdebug_state[device_id];
	char file_name[20];
	int i;
	struct proc_dir_entry *gpc_tpc_mask_entry;
	// Get maximum number of enabled GPCs for this chip
	uint32_t max_gpcs = nvdebug_readl(g, NV_PTOP_SCAL_NUM_GPCS);
	// Get a bitmask of which GPCs are disabled
	uint32_t gpcs_mask;
	if (g->chip_id < NV_CHIP_ID_AMPERE)
		gpcs_mask = nvdebug_readl(g, NV_FUSE_GPC_GM107);
	else
		gpcs_mask = nvdebug_readl(g, NV_FUSE_GPC_GA100);
	// Verify the reads succeeded
	if (max_gpcs == -1 || gpcs_mask == -1)
		return -EIO;
	// For each enabled GPC, expose a mask of disabled TPCs
	for (i = 0; i < max_gpcs; i++) {
		// Do nothing if GPC is disabled
		if ((1 << i) & gpcs_mask)
			continue;
		// If GPC is enabled, create an entry to read disabled TPCs mask
		snprintf(file_name, 20, "gpc%d_tpc_mask", i);
		if (g->chip_id < NV_CHIP_ID_AMPERE)
			gpc_tpc_mask_entry = proc_create_data(
				file_name, 0444, dir, compat_ops(&nvdebug_read_reg32_file_ops),
				(void*)(uintptr_t)NV_FUSE_TPC_FOR_GPC_GM107(i));
		else
			gpc_tpc_mask_entry = proc_create_data(
				file_name, 0444, dir, compat_ops(&nvdebug_read_reg32_file_ops),
				(void*)(uintptr_t)NV_FUSE_TPC_FOR_GPC_GA100(i));
		if (!gpc_tpc_mask_entry)
			return -ENOMEM;
	}
	return 0;
}

int __init nvdebug_init(void) {
	struct proc_dir_entry *dir;
	int err, res;
	// Check that an NVIDIA GPU is present and initialize g_nvdebug_state
	if ((res = probe_and_cache_devices()) < 0)
		return res;
	g_nvdebug_devices = res;
	// Create seperate ProcFS directories for each gpu
	while (res--) {
		char device_id_str[7];
		// Create a wider copy of the GPU ID to allow us to abuse the *data
		// field of proc_dir_entry to store the GPU ID.
		uintptr_t device_id = res;
		// Create directory /proc/gpu# where # is the GPU number
		// As ProcFS entry creation only fails if out of memory, we auto-skip
		// to handling that on any error in creating ProcFS files.
		snprintf(device_id_str, 7, "gpu%ld", device_id);
		if (!(dir = proc_mkdir_data(device_id_str, 0555, NULL, (void*)device_id)))
			goto out_nomem;
		// Create files `/proc/gpu#/runlist#`, world readable
		if (g_nvdebug_state[device_id].chip_id < NV_CHIP_ID_AMPERE)
			if ((err = create_runlist_files(device_id, dir)))
				goto out_err;
		// Create file `/proc/gpu#/preempt_tsg`, world writable
		if (!proc_create_data(
				"preempt_tsg", 0222, dir, compat_ops(&preempt_tsg_file_ops),
				(void*)device_id))
			goto out_nomem;
		/* On the TU104, the context scheduler (contained in the Host, aka
		 * PFIFO, unit) has been observed to sometimes to fail to schedule TSGs
		 * containing re-enabled channels. Resubmitting the runlist
		 * configuration appears to remediate this condition, and so this API
		 * is exposed to help reset GPU scheduling as necessary.
		 */
		// Create file `/proc/gpu#/resubmit_runlist`, world writable
		if (!proc_create_data(
				"resubmit_runlist", 0222, dir, compat_ops(&resubmit_runlist_file_ops),
				(void*)device_id))
			goto out_nomem;
		// Create file `/proc/gpu#/disable_channel`, world writable
		if (!proc_create_data(
				"disable_channel", 0222, dir, compat_ops(&disable_channel_file_ops),
				(void*)device_id))
			goto out_nomem;
		// Create file `/proc/gpu#/enable_channel`, world writable
		if (!proc_create_data(
				"enable_channel", 0222, dir, compat_ops(&enable_channel_file_ops),
				(void*)device_id))
			goto out_nomem;
		// Create file `/proc/gpu#/switch_to_tsg`, world writable
		if (!proc_create_data(
				"switch_to_tsg", 0222, dir, compat_ops(&switch_to_tsg_file_ops),
				(void*)device_id))
			goto out_nomem;
		// Create file `/proc/gpu#/device_info`, world readable
		if (!proc_create_data(
				"device_info", 0444, dir, compat_ops(&device_info_file_ops),
				(void*)device_id))
			goto out_nomem;
		// Create file `/proc/gpu#/num_gpcs`, world readable
		if (!proc_create_data(
				"num_gpcs", 0444, dir, compat_ops(&nvdebug_read_reg32_file_ops),
				(void*)NV_PTOP_SCAL_NUM_GPCS))
			goto out_nomem;
		// Create file `/proc/gpu#/num_tpc_per_gpc`, world readable
		if (!proc_create_data(
				"num_tpc_per_gpc", 0444, dir, compat_ops(&nvdebug_read_reg32_file_ops),
				(void*)NV_PTOP_SCAL_NUM_TPC_PER_GPC))
			goto out_nomem;
		// Create file `/proc/gpu#/num_ces`, world readable
		if (!proc_create_data(
				"num_ces", 0444, dir, compat_ops(&nvdebug_read_reg32_file_ops),
				(void*)NV_PTOP_SCAL_NUM_CES))
			goto out_nomem;
		// Create files `/proc/gpu#/gpc#_tpc_mask`, world readable (Maxwell+)
		if (g_nvdebug_state[res].chip_id >= NV_CHIP_ID_MAXWELL)
			if ((err = create_tpc_mask_files(device_id, dir)))
				goto out_err;
		// Create file `/proc/gpu#/gpc_mask`, world readable (Maxwell+)
		if (g_nvdebug_state[res].chip_id >= NV_CHIP_ID_AMPERE) {
			if (!proc_create_data(
					"gpc_mask", 0444, dir, compat_ops(&nvdebug_read_reg32_file_ops),
					(void*)NV_FUSE_GPC_GA100))
				goto out_nomem;
		} else if (g_nvdebug_state[res].chip_id >= NV_CHIP_ID_MAXWELL) {
			if (!proc_create_data(
					"gpc_mask", 0444, dir, compat_ops(&nvdebug_read_reg32_file_ops),
					(void*)NV_FUSE_GPC_GM107))
				goto out_nomem;
		}
		// Create file `/proc/gpu#/local_memory`, world readable (Pascal+)
		if (g_nvdebug_state[res].chip_id >= NV_CHIP_ID_PASCAL) {
			if (!proc_create_data(
					"local_memory", 0444, dir, compat_ops(&local_memory_file_ops),
					(void*)0x00100ce0))
				goto out_nomem;
			}
		// Create files exposing LCE and PCE configuration (Pascal+)
		if (g_nvdebug_state[res].chip_id >= NV_CHIP_ID_PASCAL) {
			// Create file `/proc/gpu#/copy_topology`, world readable
			if (!proc_create_data(
					"copy_topology", 0444, dir, compat_ops(&copy_topology_file_ops),
					(void*)0))
				goto out_nomem;
			// Create file `/proc/gpu#/pce_map`, world readable
			if (!proc_create_data(
					"pce_map", 0444, dir, compat_ops(&nvdebug_read_reg32_file_ops),
					(void*)NV_CE_PCE_MAP))
				goto out_nomem;
		}
	}
	// (See Makefile if you want to know the origin of GIT_HASH.)
	printk(KERN_INFO "[nvdebug] Module version "GIT_HASH" initialized\n");
	return 0;
out_nomem:
	err = -ENOMEM;
out_err:
	// Make sure to clear all ProcFS directories on error
	while (res < g_nvdebug_devices) {
		char device_id_str[7];
		snprintf(device_id_str, 7, "gpu%d", res);
		remove_proc_subtree(device_id_str, NULL);
		res++;
	}
	return err;
}

static void __exit nvdebug_exit(void) {
	struct nvdebug_state *g;
	// Deinitialize each device
	while (g_nvdebug_devices--) {
		// Remove procfs directory
		char device_id[7];
		snprintf(device_id, 7, "gpu%d", g_nvdebug_devices);
		remove_proc_subtree(device_id, NULL);
		// Free BAR mappings for PCIe devices
		g = &g_nvdebug_state[g_nvdebug_devices];
		if (g && g->pcid) {
			if (g && g->regs)
				pci_iounmap(g->pcid, g->regs);
			if (g && g->bar2)
				pci_iounmap(g->pcid, g->bar2);
#if INTERRUPT_DEBUG
			free_irq(g->pcid->irq, g->pcid);
#endif // INTERRUPT_DEBUG
		}
		printk(KERN_INFO "[nvdebug] Chip ID %x deinitialized.", g->chip_id);
	}
	printk(KERN_INFO "[nvdebug] Module exit complete.\n");
}

module_init(nvdebug_init);
module_exit(nvdebug_exit);