/* Linux Driver for BusLogic MultiMaster and FlashPoint SCSI Host Adapters Copyright 1995-1998 by Leonard N. Zubkoff This program is free software; you may redistribute and/or modify it under the terms of the GNU General Public License Version 2 as published by the Free Software Foundation. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for complete details. The author respectfully requests that any modifications to this software be sent directly to him for evaluation and testing. Special thanks to Wayne Yen, Jin-Lon Hon, and Alex Win of BusLogic, whose advice has been invaluable, to David Gentzel, for writing the original Linux BusLogic driver, and to Paul Gortmaker, for being such a dedicated test site. Finally, special thanks to Mylex/BusLogic for making the FlashPoint SCCB Manager available as freely redistributable source code. */ #define BusLogic_DriverVersion "2.1.16" #define BusLogic_DriverDate "18 July 2002" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "BusLogic.h" #include "FlashPoint.c" #ifndef FAILURE #define FAILURE (-1) #endif static struct scsi_host_template Bus_Logic_template; /* BusLogic_DriverOptionsCount is a count of the number of BusLogic Driver Options specifications provided via the Linux Kernel Command Line or via the Loadable Kernel Module Installation Facility. */ static int BusLogic_DriverOptionsCount; /* BusLogic_DriverOptions is an array of Driver Options structures representing BusLogic Driver Options specifications provided via the Linux Kernel Command Line or via the Loadable Kernel Module Installation Facility. */ static struct BusLogic_DriverOptions BusLogic_DriverOptions[BusLogic_MaxHostAdapters]; /* BusLogic can be assigned a string by insmod. */ MODULE_LICENSE("GPL"); #ifdef MODULE static char *BusLogic; module_param(BusLogic, charp, 0); #endif /* BusLogic_ProbeOptions is a set of Probe Options to be applied across all BusLogic Host Adapters. */ static struct BusLogic_ProbeOptions BusLogic_ProbeOptions; /* BusLogic_GlobalOptions is a set of Global Options to be applied across all BusLogic Host Adapters. */ static struct BusLogic_GlobalOptions BusLogic_GlobalOptions; static LIST_HEAD(BusLogic_host_list); /* BusLogic_ProbeInfoCount is the number of entries in BusLogic_ProbeInfoList. */ static int BusLogic_ProbeInfoCount; /* BusLogic_ProbeInfoList is the list of I/O Addresses and Bus Probe Information to be checked for potential BusLogic Host Adapters. It is initialized by interrogating the PCI Configuration Space on PCI machines as well as from the list of standard BusLogic I/O Addresses. */ static struct BusLogic_ProbeInfo *BusLogic_ProbeInfoList; /* BusLogic_CommandFailureReason holds a string identifying the reason why a call to BusLogic_Command failed. It is only non-NULL when BusLogic_Command returns a failure code. */ static char *BusLogic_CommandFailureReason; /* BusLogic_AnnounceDriver announces the Driver Version and Date, Author's Name, Copyright Notice, and Electronic Mail Address. */ static void BusLogic_AnnounceDriver(struct BusLogic_HostAdapter *HostAdapter) { BusLogic_Announce("***** BusLogic SCSI Driver Version " BusLogic_DriverVersion " of " BusLogic_DriverDate " *****\n", HostAdapter); BusLogic_Announce("Copyright 1995-1998 by Leonard N. Zubkoff " "\n", HostAdapter); } /* BusLogic_DriverInfo returns the Host Adapter Name to identify this SCSI Driver and Host Adapter. */ static const char *BusLogic_DriverInfo(struct Scsi_Host *Host) { struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) Host->hostdata; return HostAdapter->FullModelName; } /* BusLogic_InitializeCCBs initializes a group of Command Control Blocks (CCBs) for Host Adapter from the BlockSize bytes located at BlockPointer. The newly created CCBs are added to Host Adapter's free list. */ static void BusLogic_InitializeCCBs(struct BusLogic_HostAdapter *HostAdapter, void *BlockPointer, int BlockSize, dma_addr_t BlockPointerHandle) { struct BusLogic_CCB *CCB = (struct BusLogic_CCB *) BlockPointer; unsigned int offset = 0; memset(BlockPointer, 0, BlockSize); CCB->AllocationGroupHead = BlockPointerHandle; CCB->AllocationGroupSize = BlockSize; while ((BlockSize -= sizeof(struct BusLogic_CCB)) >= 0) { CCB->Status = BusLogic_CCB_Free; CCB->HostAdapter = HostAdapter; CCB->DMA_Handle = (u32) BlockPointerHandle + offset; if (BusLogic_FlashPointHostAdapterP(HostAdapter)) { CCB->CallbackFunction = BusLogic_QueueCompletedCCB; CCB->BaseAddress = HostAdapter->FlashPointInfo.BaseAddress; } CCB->Next = HostAdapter->Free_CCBs; CCB->NextAll = HostAdapter->All_CCBs; HostAdapter->Free_CCBs = CCB; HostAdapter->All_CCBs = CCB; HostAdapter->AllocatedCCBs++; CCB++; offset += sizeof(struct BusLogic_CCB); } } /* BusLogic_CreateInitialCCBs allocates the initial CCBs for Host Adapter. */ static boolean __init BusLogic_CreateInitialCCBs(struct BusLogic_HostAdapter *HostAdapter) { int BlockSize = BusLogic_CCB_AllocationGroupSize * sizeof(struct BusLogic_CCB); void *BlockPointer; dma_addr_t BlockPointerHandle; while (HostAdapter->AllocatedCCBs < HostAdapter->InitialCCBs) { BlockPointer = pci_alloc_consistent(HostAdapter->PCI_Device, BlockSize, &BlockPointerHandle); if (BlockPointer == NULL) { BusLogic_Error("UNABLE TO ALLOCATE CCB GROUP - DETACHING\n", HostAdapter); return false; } BusLogic_InitializeCCBs(HostAdapter, BlockPointer, BlockSize, BlockPointerHandle); } return true; } /* BusLogic_DestroyCCBs deallocates the CCBs for Host Adapter. */ static void BusLogic_DestroyCCBs(struct BusLogic_HostAdapter *HostAdapter) { struct BusLogic_CCB *NextCCB = HostAdapter->All_CCBs, *CCB, *Last_CCB = NULL; HostAdapter->All_CCBs = NULL; HostAdapter->Free_CCBs = NULL; while ((CCB = NextCCB) != NULL) { NextCCB = CCB->NextAll; if (CCB->AllocationGroupHead) { if (Last_CCB) pci_free_consistent(HostAdapter->PCI_Device, Last_CCB->AllocationGroupSize, Last_CCB, Last_CCB->AllocationGroupHead); Last_CCB = CCB; } } if (Last_CCB) pci_free_consistent(HostAdapter->PCI_Device, Last_CCB->AllocationGroupSize, Last_CCB, Last_CCB->AllocationGroupHead); } /* BusLogic_CreateAdditionalCCBs allocates Additional CCBs for Host Adapter. If allocation fails and there are no remaining CCBs available, the Driver Queue Depth is decreased to a known safe value to avoid potential deadlocks when multiple host adapters share the same IRQ Channel. */ static void BusLogic_CreateAdditionalCCBs(struct BusLogic_HostAdapter *HostAdapter, int AdditionalCCBs, boolean SuccessMessageP) { int BlockSize = BusLogic_CCB_AllocationGroupSize * sizeof(struct BusLogic_CCB); int PreviouslyAllocated = HostAdapter->AllocatedCCBs; void *BlockPointer; dma_addr_t BlockPointerHandle; if (AdditionalCCBs <= 0) return; while (HostAdapter->AllocatedCCBs - PreviouslyAllocated < AdditionalCCBs) { BlockPointer = pci_alloc_consistent(HostAdapter->PCI_Device, BlockSize, &BlockPointerHandle); if (BlockPointer == NULL) break; BusLogic_InitializeCCBs(HostAdapter, BlockPointer, BlockSize, BlockPointerHandle); } if (HostAdapter->AllocatedCCBs > PreviouslyAllocated) { if (SuccessMessageP) BusLogic_Notice("Allocated %d additional CCBs (total now %d)\n", HostAdapter, HostAdapter->AllocatedCCBs - PreviouslyAllocated, HostAdapter->AllocatedCCBs); return; } BusLogic_Notice("Failed to allocate additional CCBs\n", HostAdapter); if (HostAdapter->DriverQueueDepth > HostAdapter->AllocatedCCBs - HostAdapter->TargetDeviceCount) { HostAdapter->DriverQueueDepth = HostAdapter->AllocatedCCBs - HostAdapter->TargetDeviceCount; HostAdapter->SCSI_Host->can_queue = HostAdapter->DriverQueueDepth; } } /* BusLogic_AllocateCCB allocates a CCB from Host Adapter's free list, allocating more memory from the Kernel if necessary. The Host Adapter's Lock should already have been acquired by the caller. */ static struct BusLogic_CCB *BusLogic_AllocateCCB(struct BusLogic_HostAdapter *HostAdapter) { static unsigned long SerialNumber = 0; struct BusLogic_CCB *CCB; CCB = HostAdapter->Free_CCBs; if (CCB != NULL) { CCB->SerialNumber = ++SerialNumber; HostAdapter->Free_CCBs = CCB->Next; CCB->Next = NULL; if (HostAdapter->Free_CCBs == NULL) BusLogic_CreateAdditionalCCBs(HostAdapter, HostAdapter->IncrementalCCBs, true); return CCB; } BusLogic_CreateAdditionalCCBs(HostAdapter, HostAdapter->IncrementalCCBs, true); CCB = HostAdapter->Free_CCBs; if (CCB == NULL) return NULL; CCB->SerialNumber = ++SerialNumber; HostAdapter->Free_CCBs = CCB->Next; CCB->Next = NULL; return CCB; } /* BusLogic_DeallocateCCB deallocates a CCB, returning it to the Host Adapter's free list. The Host Adapter's Lock should already have been acquired by the caller. */ static void BusLogic_DeallocateCCB(struct BusLogic_CCB *CCB) { struct BusLogic_HostAdapter *HostAdapter = CCB->HostAdapter; struct scsi_cmnd *cmd = CCB->Command; if (cmd->use_sg != 0) { pci_unmap_sg(HostAdapter->PCI_Device, (struct scatterlist *)cmd->request_buffer, cmd->use_sg, cmd->sc_data_direction); } else if (cmd->request_bufflen != 0) { pci_unmap_single(HostAdapter->PCI_Device, CCB->DataPointer, CCB->DataLength, cmd->sc_data_direction); } pci_unmap_single(HostAdapter->PCI_Device, CCB->SenseDataPointer, CCB->SenseDataLength, PCI_DMA_FROMDEVICE); CCB->Command = NULL; CCB->Status = BusLogic_CCB_Free; CCB->Next = HostAdapter->Free_CCBs; HostAdapter->Free_CCBs = CCB; } /* BusLogic_Command sends the command OperationCode to HostAdapter, optionally providing ParameterLength bytes of ParameterData and receiving at most ReplyLength bytes of ReplyData; any excess reply data is received but discarded. On success, this function returns the number of reply bytes read from the Host Adapter (including any discarded data); on failure, it returns -1 if the command was invalid, or -2 if a timeout occurred. BusLogic_Command is called exclusively during host adapter detection and initialization, so performance and latency are not critical, and exclusive access to the Host Adapter hardware is assumed. Once the host adapter and driver are initialized, the only Host Adapter command that is issued is the single byte Execute Mailbox Command operation code, which does not require waiting for the Host Adapter Ready bit to be set in the Status Register. */ static int BusLogic_Command(struct BusLogic_HostAdapter *HostAdapter, enum BusLogic_OperationCode OperationCode, void *ParameterData, int ParameterLength, void *ReplyData, int ReplyLength) { unsigned char *ParameterPointer = (unsigned char *) ParameterData; unsigned char *ReplyPointer = (unsigned char *) ReplyData; union BusLogic_StatusRegister StatusRegister; union BusLogic_InterruptRegister InterruptRegister; unsigned long ProcessorFlags = 0; int ReplyBytes = 0, Result; long TimeoutCounter; /* Clear out the Reply Data if provided. */ if (ReplyLength > 0) memset(ReplyData, 0, ReplyLength); /* If the IRQ Channel has not yet been acquired, then interrupts must be disabled while issuing host adapter commands since a Command Complete interrupt could occur if the IRQ Channel was previously enabled by another BusLogic Host Adapter or another driver sharing the same IRQ Channel. */ if (!HostAdapter->IRQ_ChannelAcquired) { local_irq_save(ProcessorFlags); local_irq_disable(); } /* Wait for the Host Adapter Ready bit to be set and the Command/Parameter Register Busy bit to be reset in the Status Register. */ TimeoutCounter = 10000; while (--TimeoutCounter >= 0) { StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter); if (StatusRegister.sr.HostAdapterReady && !StatusRegister.sr.CommandParameterRegisterBusy) break; udelay(100); } if (TimeoutCounter < 0) { BusLogic_CommandFailureReason = "Timeout waiting for Host Adapter Ready"; Result = -2; goto Done; } /* Write the OperationCode to the Command/Parameter Register. */ HostAdapter->HostAdapterCommandCompleted = false; BusLogic_WriteCommandParameterRegister(HostAdapter, OperationCode); /* Write any additional Parameter Bytes. */ TimeoutCounter = 10000; while (ParameterLength > 0 && --TimeoutCounter >= 0) { /* Wait 100 microseconds to give the Host Adapter enough time to determine whether the last value written to the Command/Parameter Register was valid or not. If the Command Complete bit is set in the Interrupt Register, then the Command Invalid bit in the Status Register will be reset if the Operation Code or Parameter was valid and the command has completed, or set if the Operation Code or Parameter was invalid. If the Data In Register Ready bit is set in the Status Register, then the Operation Code was valid, and data is waiting to be read back from the Host Adapter. Otherwise, wait for the Command/Parameter Register Busy bit in the Status Register to be reset. */ udelay(100); InterruptRegister.All = BusLogic_ReadInterruptRegister(HostAdapter); StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter); if (InterruptRegister.ir.CommandComplete) break; if (HostAdapter->HostAdapterCommandCompleted) break; if (StatusRegister.sr.DataInRegisterReady) break; if (StatusRegister.sr.CommandParameterRegisterBusy) continue; BusLogic_WriteCommandParameterRegister(HostAdapter, *ParameterPointer++); ParameterLength--; } if (TimeoutCounter < 0) { BusLogic_CommandFailureReason = "Timeout waiting for Parameter Acceptance"; Result = -2; goto Done; } /* The Modify I/O Address command does not cause a Command Complete Interrupt. */ if (OperationCode == BusLogic_ModifyIOAddress) { StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter); if (StatusRegister.sr.CommandInvalid) { BusLogic_CommandFailureReason = "Modify I/O Address Invalid"; Result = -1; goto Done; } if (BusLogic_GlobalOptions.TraceConfiguration) BusLogic_Notice("BusLogic_Command(%02X) Status = %02X: " "(Modify I/O Address)\n", HostAdapter, OperationCode, StatusRegister.All); Result = 0; goto Done; } /* Select an appropriate timeout value for awaiting command completion. */ switch (OperationCode) { case BusLogic_InquireInstalledDevicesID0to7: case BusLogic_InquireInstalledDevicesID8to15: case BusLogic_InquireTargetDevices: /* Approximately 60 seconds. */ TimeoutCounter = 60 * 10000; break; default: /* Approximately 1 second. */ TimeoutCounter = 10000; break; } /* Receive any Reply Bytes, waiting for either the Command Complete bit to be set in the Interrupt Register, or for the Interrupt Handler to set the Host Adapter Command Completed bit in the Host Adapter structure. */ while (--TimeoutCounter >= 0) { InterruptRegister.All = BusLogic_ReadInterruptRegister(HostAdapter); StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter); if (InterruptRegister.ir.CommandComplete) break; if (HostAdapter->HostAdapterCommandCompleted) break; if (StatusRegister.sr.DataInRegisterReady) { if (++ReplyBytes <= ReplyLength) *ReplyPointer++ = BusLogic_ReadDataInRegister(HostAdapter); else BusLogic_ReadDataInRegister(HostAdapter); } if (OperationCode == BusLogic_FetchHostAdapterLocalRAM && StatusRegister.sr.HostAdapterReady) break; udelay(100); } if (TimeoutCounter < 0) { BusLogic_CommandFailureReason = "Timeout waiting for Command Complete"; Result = -2; goto Done; } /* Clear any pending Command Complete Interrupt. */ BusLogic_InterruptReset(HostAdapter); /* Provide tracing information if requested. */ if (BusLogic_GlobalOptions.TraceConfiguration) { int i; BusLogic_Notice("BusLogic_Command(%02X) Status = %02X: %2d ==> %2d:", HostAdapter, OperationCode, StatusRegister.All, ReplyLength, ReplyBytes); if (ReplyLength > ReplyBytes) ReplyLength = ReplyBytes; for (i = 0; i < ReplyLength; i++) BusLogic_Notice(" %02X", HostAdapter, ((unsigned char *) ReplyData)[i]); BusLogic_Notice("\n", HostAdapter); } /* Process Command Invalid conditions. */ if (StatusRegister.sr.CommandInvalid) { /* Some early BusLogic Host Adapters may not recover properly from a Command Invalid condition, so if this appears to be the case, a Soft Reset is issued to the Host Adapter. Potentially invalid commands are never attempted after Mailbox Initialization is performed, so there should be no Host Adapter state lost by a Soft Reset in response to a Command Invalid condition. */ udelay(1000); StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter); if (StatusRegister.sr.CommandInvalid || StatusRegister.sr.Reserved || StatusRegister.sr.DataInRegisterReady || StatusRegister.sr.CommandParameterRegisterBusy || !StatusRegister.sr.HostAdapterReady || !StatusRegister.sr.InitializationRequired || StatusRegister.sr.DiagnosticActive || StatusRegister.sr.DiagnosticFailure) { BusLogic_SoftReset(HostAdapter); udelay(1000); } BusLogic_CommandFailureReason = "Command Invalid"; Result = -1; goto Done; } /* Handle Excess Parameters Supplied conditions. */ if (ParameterLength > 0) { BusLogic_CommandFailureReason = "Excess Parameters Supplied"; Result = -1; goto Done; } /* Indicate the command completed successfully. */ BusLogic_CommandFailureReason = NULL; Result = ReplyBytes; /* Restore the interrupt status if necessary and return. */ Done: if (!HostAdapter->IRQ_ChannelAcquired) local_irq_restore(ProcessorFlags); return Result; } /* BusLogic_AppendProbeAddressISA appends a single ISA I/O Address to the list of I/O Address and Bus Probe Information to be checked for potential BusLogic Host Adapters. */ static void __init BusLogic_AppendProbeAddressISA(unsigned long IO_Address) { struct BusLogic_ProbeInfo *ProbeInfo; if (BusLogic_ProbeInfoCount >= BusLogic_MaxHostAdapters) return; ProbeInfo = &BusLogic_ProbeInfoList[BusLogic_ProbeInfoCount++]; ProbeInfo->HostAdapterType = BusLogic_MultiMaster; ProbeInfo->HostAdapterBusType = BusLogic_ISA_Bus; ProbeInfo->IO_Address = IO_Address; ProbeInfo->PCI_Device = NULL; } /* BusLogic_InitializeProbeInfoListISA initializes the list of I/O Address and Bus Probe Information to be checked for potential BusLogic SCSI Host Adapters only from the list of standard BusLogic MultiMaster ISA I/O Addresses. */ static void __init BusLogic_InitializeProbeInfoListISA(struct BusLogic_HostAdapter *PrototypeHostAdapter) { /* If BusLogic Driver Options specifications requested that ISA Bus Probes be inhibited, do not proceed further. */ if (BusLogic_ProbeOptions.NoProbeISA) return; /* Append the list of standard BusLogic MultiMaster ISA I/O Addresses. */ if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe330 : check_region(0x330, BusLogic_MultiMasterAddressCount) == 0) BusLogic_AppendProbeAddressISA(0x330); if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe334 : check_region(0x334, BusLogic_MultiMasterAddressCount) == 0) BusLogic_AppendProbeAddressISA(0x334); if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe230 : check_region(0x230, BusLogic_MultiMasterAddressCount) == 0) BusLogic_AppendProbeAddressISA(0x230); if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe234 : check_region(0x234, BusLogic_MultiMasterAddressCount) == 0) BusLogic_AppendProbeAddressISA(0x234); if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe130 : check_region(0x130, BusLogic_MultiMasterAddressCount) == 0) BusLogic_AppendProbeAddressISA(0x130); if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe134 : check_region(0x134, BusLogic_MultiMasterAddressCount) == 0) BusLogic_AppendProbeAddressISA(0x134); } #ifdef CONFIG_PCI /* BusLogic_SortProbeInfo sorts a section of BusLogic_ProbeInfoList in order of increasing PCI Bus and Device Number. */ static void __init BusLogic_SortProbeInfo(struct BusLogic_ProbeInfo *ProbeInfoList, int ProbeInfoCount) { int LastInterchange = ProbeInfoCount - 1, Bound, j; while (LastInterchange > 0) { Bound = LastInterchange; LastInterchange = 0; for (j = 0; j < Bound; j++) { struct BusLogic_ProbeInfo *ProbeInfo1 = &ProbeInfoList[j]; struct BusLogic_ProbeInfo *ProbeInfo2 = &ProbeInfoList[j + 1]; if (ProbeInfo1->Bus > ProbeInfo2->Bus || (ProbeInfo1->Bus == ProbeInfo2->Bus && (ProbeInfo1->Device > ProbeInfo2->Device))) { struct BusLogic_ProbeInfo TempProbeInfo; memcpy(&TempProbeInfo, ProbeInfo1, sizeof(struct BusLogic_ProbeInfo)); memcpy(ProbeInfo1, ProbeInfo2, sizeof(struct BusLogic_ProbeInfo)); memcpy(ProbeInfo2, &TempProbeInfo, sizeof(struct BusLogic_ProbeInfo)); LastInterchange = j; } } } } /* BusLogic_InitializeMultiMasterProbeInfo initializes the list of I/O Address and Bus Probe Information to be checked for potential BusLogic MultiMaster SCSI Host Adapters by interrogating the PCI Configuration Space on PCI machines as well as from the list of standard BusLogic MultiMaster ISA I/O Addresses. It returns the number of PCI MultiMaster Host Adapters found. */ static int __init BusLogic_InitializeMultiMasterProbeInfo(struct BusLogic_HostAdapter *PrototypeHostAdapter) { struct BusLogic_ProbeInfo *PrimaryProbeInfo = &BusLogic_ProbeInfoList[BusLogic_ProbeInfoCount]; int NonPrimaryPCIMultiMasterIndex = BusLogic_ProbeInfoCount + 1; int NonPrimaryPCIMultiMasterCount = 0, PCIMultiMasterCount = 0; boolean ForceBusDeviceScanningOrder = false; boolean ForceBusDeviceScanningOrderChecked = false; boolean StandardAddressSeen[6]; struct pci_dev *PCI_Device = NULL; int i; if (BusLogic_ProbeInfoCount >= BusLogic_MaxHostAdapters) return 0; BusLogic_ProbeInfoCount++; for (i = 0; i < 6; i++) StandardAddressSeen[i] = false; /* Iterate over the MultiMaster PCI Host Adapters. For each enumerated host adapter, determine whether its ISA Compatible I/O Port is enabled and if so, whether it is assigned the Primary I/O Address. A host adapter that is assigned the Primary I/O Address will always be the preferred boot device. The MultiMaster BIOS will first recognize a host adapter at the Primary I/O Address, then any other PCI host adapters, and finally any host adapters located at the remaining standard ISA I/O Addresses. When a PCI host adapter is found with its ISA Compatible I/O Port enabled, a command is issued to disable the ISA Compatible I/O Port, and it is noted that the particular standard ISA I/O Address need not be probed. */ PrimaryProbeInfo->IO_Address = 0; while ((PCI_Device = pci_find_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER, PCI_Device)) != NULL) { struct BusLogic_HostAdapter *HostAdapter = PrototypeHostAdapter; struct BusLogic_PCIHostAdapterInformation PCIHostAdapterInformation; enum BusLogic_ISACompatibleIOPort ModifyIOAddressRequest; unsigned char Bus; unsigned char Device; unsigned int IRQ_Channel; unsigned long BaseAddress0; unsigned long BaseAddress1; unsigned long IO_Address; unsigned long PCI_Address; if (pci_enable_device(PCI_Device)) continue; if (pci_set_dma_mask(PCI_Device, DMA_32BIT_MASK )) continue; Bus = PCI_Device->bus->number; Device = PCI_Device->devfn >> 3; IRQ_Channel = PCI_Device->irq; IO_Address = BaseAddress0 = pci_resource_start(PCI_Device, 0); PCI_Address = BaseAddress1 = pci_resource_start(PCI_Device, 1); if (pci_resource_flags(PCI_Device, 0) & IORESOURCE_MEM) { BusLogic_Error("BusLogic: Base Address0 0x%X not I/O for " "MultiMaster Host Adapter\n", NULL, BaseAddress0); BusLogic_Error("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, Bus, Device, IO_Address); continue; } if (pci_resource_flags(PCI_Device, 1) & IORESOURCE_IO) { BusLogic_Error("BusLogic: Base Address1 0x%X not Memory for " "MultiMaster Host Adapter\n", NULL, BaseAddress1); BusLogic_Error("at PCI Bus %d Device %d PCI Address 0x%X\n", NULL, Bus, Device, PCI_Address); continue; } if (IRQ_Channel == 0) { BusLogic_Error("BusLogic: IRQ Channel %d invalid for " "MultiMaster Host Adapter\n", NULL, IRQ_Channel); BusLogic_Error("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, Bus, Device, IO_Address); continue; } if (BusLogic_GlobalOptions.TraceProbe) { BusLogic_Notice("BusLogic: PCI MultiMaster Host Adapter " "detected at\n", NULL); BusLogic_Notice("BusLogic: PCI Bus %d Device %d I/O Address " "0x%X PCI Address 0x%X\n", NULL, Bus, Device, IO_Address, PCI_Address); } /* Issue the Inquire PCI Host Adapter Information command to determine the ISA Compatible I/O Port. If the ISA Compatible I/O Port is known and enabled, note that the particular Standard ISA I/O Address should not be probed. */ HostAdapter->IO_Address = IO_Address; BusLogic_InterruptReset(HostAdapter); if (BusLogic_Command(HostAdapter, BusLogic_InquirePCIHostAdapterInformation, NULL, 0, &PCIHostAdapterInformation, sizeof(PCIHostAdapterInformation)) == sizeof(PCIHostAdapterInformation)) { if (PCIHostAdapterInformation.ISACompatibleIOPort < 6) StandardAddressSeen[PCIHostAdapterInformation.ISACompatibleIOPort] = true; } else PCIHostAdapterInformation.ISACompatibleIOPort = BusLogic_IO_Disable; /* * Issue the Modify I/O Address command to disable the ISA Compatible * I/O Port. On PCI Host Adapters, the Modify I/O Address command * allows modification of the ISA compatible I/O Address that the Host * Adapter responds to; it does not affect the PCI compliant I/O Address * assigned at system initialization. */ ModifyIOAddressRequest = BusLogic_IO_Disable; BusLogic_Command(HostAdapter, BusLogic_ModifyIOAddress, &ModifyIOAddressRequest, sizeof(ModifyIOAddressRequest), NULL, 0); /* For the first MultiMaster Host Adapter enumerated, issue the Fetch Host Adapter Local RAM command to read byte 45 of the AutoSCSI area, for the setting of the "Use Bus And Device # For PCI Scanning Seq." option. Issue the Inquire Board ID command since this option is only valid for the BT-948/958/958D. */ if (!ForceBusDeviceScanningOrderChecked) { struct BusLogic_FetchHostAdapterLocalRAMRequest FetchHostAdapterLocalRAMRequest; struct BusLogic_AutoSCSIByte45 AutoSCSIByte45; struct BusLogic_BoardID BoardID; FetchHostAdapterLocalRAMRequest.ByteOffset = BusLogic_AutoSCSI_BaseOffset + 45; FetchHostAdapterLocalRAMRequest.ByteCount = sizeof(AutoSCSIByte45); BusLogic_Command(HostAdapter, BusLogic_FetchHostAdapterLocalRAM, &FetchHostAdapterLocalRAMRequest, sizeof(FetchHostAdapterLocalRAMRequest), &AutoSCSIByte45, sizeof(AutoSCSIByte45)); BusLogic_Command(HostAdapter, BusLogic_InquireBoardID, NULL, 0, &BoardID, sizeof(BoardID)); if (BoardID.FirmwareVersion1stDigit == '5') ForceBusDeviceScanningOrder = AutoSCSIByte45.ForceBusDeviceScanningOrder; ForceBusDeviceScanningOrderChecked = true; } /* Determine whether this MultiMaster Host Adapter has its ISA Compatible I/O Port enabled and is assigned the Primary I/O Address. If it does, then it is the Primary MultiMaster Host Adapter and must be recognized first. If it does not, then it is added to the list for probing after any Primary MultiMaster Host Adapter is probed. */ if (PCIHostAdapterInformation.ISACompatibleIOPort == BusLogic_IO_330) { PrimaryProbeInfo->HostAdapterType = BusLogic_MultiMaster; PrimaryProbeInfo->HostAdapterBusType = BusLogic_PCI_Bus; PrimaryProbeInfo->IO_Address = IO_Address; PrimaryProbeInfo->PCI_Address = PCI_Address; PrimaryProbeInfo->Bus = Bus; PrimaryProbeInfo->Device = Device; PrimaryProbeInfo->IRQ_Channel = IRQ_Channel; PrimaryProbeInfo->PCI_Device = PCI_Device; PCIMultiMasterCount++; } else if (BusLogic_ProbeInfoCount < BusLogic_MaxHostAdapters) { struct BusLogic_ProbeInfo *ProbeInfo = &BusLogic_ProbeInfoList[BusLogic_ProbeInfoCount++]; ProbeInfo->HostAdapterType = BusLogic_MultiMaster; ProbeInfo->HostAdapterBusType = BusLogic_PCI_Bus; ProbeInfo->IO_Address = IO_Address; ProbeInfo->PCI_Address = PCI_Address; ProbeInfo->Bus = Bus; ProbeInfo->Device = Device; ProbeInfo->IRQ_Channel = IRQ_Channel; ProbeInfo->PCI_Device = PCI_Device; NonPrimaryPCIMultiMasterCount++; PCIMultiMasterCount++; } else BusLogic_Warning("BusLogic: Too many Host Adapters " "detected\n", NULL); } /* If the AutoSCSI "Use Bus And Device # For PCI Scanning Seq." option is ON for the first enumerated MultiMaster Host Adapter, and if that host adapter is a BT-948/958/958D, then the MultiMaster BIOS will recognize MultiMaster Host Adapters in the order of increasing PCI Bus and Device Number. In that case, sort the probe information into the same order the BIOS uses. If this option is OFF, then the MultiMaster BIOS will recognize MultiMaster Host Adapters in the order they are enumerated by the PCI BIOS, and hence no sorting is necessary. */ if (ForceBusDeviceScanningOrder) BusLogic_SortProbeInfo(&BusLogic_ProbeInfoList[NonPrimaryPCIMultiMasterIndex], NonPrimaryPCIMultiMasterCount); /* If no PCI MultiMaster Host Adapter is assigned the Primary I/O Address, then the Primary I/O Address must be probed explicitly before any PCI host adapters are probed. */ if (!BusLogic_ProbeOptions.NoProbeISA) if (PrimaryProbeInfo->IO_Address == 0 && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe330 : check_region(0x330, BusLogic_MultiMasterAddressCount) == 0)) { PrimaryProbeInfo->HostAdapterType = BusLogic_MultiMaster; PrimaryProbeInfo->HostAdapterBusType = BusLogic_ISA_Bus; PrimaryProbeInfo->IO_Address = 0x330; } /* Append the list of standard BusLogic MultiMaster ISA I/O Addresses, omitting the Primary I/O Address which has already been handled. */ if (!BusLogic_ProbeOptions.NoProbeISA) { if (!StandardAddressSeen[1] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe334 : check_region(0x334, BusLogic_MultiMasterAddressCount) == 0)) BusLogic_AppendProbeAddressISA(0x334); if (!StandardAddressSeen[2] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe230 : check_region(0x230, BusLogic_MultiMasterAddressCount) == 0)) BusLogic_AppendProbeAddressISA(0x230); if (!StandardAddressSeen[3] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe234 : check_region(0x234, BusLogic_MultiMasterAddressCount) == 0)) BusLogic_AppendProbeAddressISA(0x234); if (!StandardAddressSeen[4] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe130 : check_region(0x130, BusLogic_MultiMasterAddressCount) == 0)) BusLogic_AppendProbeAddressISA(0x130); if (!StandardAddressSeen[5] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe134 : check_region(0x134, BusLogic_MultiMasterAddressCount) == 0)) BusLogic_AppendProbeAddressISA(0x134); } /* Iterate over the older non-compliant MultiMaster PCI Host Adapters, noting the PCI bus location and assigned IRQ Channel. */ PCI_Device = NULL; while ((PCI_Device = pci_find_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC, PCI_Device)) != NULL) { unsigned char Bus; unsigned char Device; unsigned int IRQ_Channel; unsigned long IO_Address; if (pci_enable_device(PCI_Device)) continue; if (pci_set_dma_mask(PCI_Device, DMA_32BIT_MASK)) continue; Bus = PCI_Device->bus->number; Device = PCI_Device->devfn >> 3; IRQ_Channel = PCI_Device->irq; IO_Address = pci_resource_start(PCI_Device, 0); if (IO_Address == 0 || IRQ_Channel == 0) continue; for (i = 0; i < BusLogic_ProbeInfoCount; i++) { struct BusLogic_ProbeInfo *ProbeInfo = &BusLogic_ProbeInfoList[i]; if (ProbeInfo->IO_Address == IO_Address && ProbeInfo->HostAdapterType == BusLogic_MultiMaster) { ProbeInfo->HostAdapterBusType = BusLogic_PCI_Bus; ProbeInfo->PCI_Address = 0; ProbeInfo->Bus = Bus; ProbeInfo->Device = Device; ProbeInfo->IRQ_Channel = IRQ_Channel; ProbeInfo->PCI_Device = PCI_Device; break; } } } return PCIMultiMasterCount; } /* BusLogic_InitializeFlashPointProbeInfo initializes the list of I/O Address and Bus Probe Information to be checked for potential BusLogic FlashPoint Host Adapters by interrogating the PCI Configuration Space. It returns the number of FlashPoint Host Adapters found. */ static int __init BusLogic_InitializeFlashPointProbeInfo(struct BusLogic_HostAdapter *PrototypeHostAdapter) { int FlashPointIndex = BusLogic_ProbeInfoCount, FlashPointCount = 0; struct pci_dev *PCI_Device = NULL; /* Interrogate PCI Configuration Space for any FlashPoint Host Adapters. */ while ((PCI_Device = pci_find_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT, PCI_Device)) != NULL) { unsigned char Bus; unsigned char Device; unsigned int IRQ_Channel; unsigned long BaseAddress0; unsigned long BaseAddress1; unsigned long IO_Address; unsigned long PCI_Address; if (pci_enable_device(PCI_Device)) continue; if (pci_set_dma_mask(PCI_Device, DMA_32BIT_MASK)) continue; Bus = PCI_Device->bus->number; Device = PCI_Device->devfn >> 3; IRQ_Channel = PCI_Device->irq; IO_Address = BaseAddress0 = pci_resource_start(PCI_Device, 0); PCI_Address = BaseAddress1 = pci_resource_start(PCI_Device, 1); #ifndef CONFIG_SCSI_OMIT_FLASHPOINT if (pci_resource_flags(PCI_Device, 0) & IORESOURCE_MEM) { BusLogic_Error("BusLogic: Base Address0 0x%X not I/O for " "FlashPoint Host Adapter\n", NULL, BaseAddress0); BusLogic_Error("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, Bus, Device, IO_Address); continue; } if (pci_resource_flags(PCI_Device, 1) & IORESOURCE_IO) { BusLogic_Error("BusLogic: Base Address1 0x%X not Memory for " "FlashPoint Host Adapter\n", NULL, BaseAddress1); BusLogic_Error("at PCI Bus %d Device %d PCI Address 0x%X\n", NULL, Bus, Device, PCI_Address); continue; } if (IRQ_Channel == 0) { BusLogic_Error("BusLogic: IRQ Channel %d invalid for " "FlashPoint Host Adapter\n", NULL, IRQ_Channel); BusLogic_Error("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, Bus, Device, IO_Address); continue; } if (BusLogic_GlobalOptions.TraceProbe) { BusLogic_Notice("BusLogic: FlashPoint Host Adapter " "detected at\n", NULL); BusLogic_Notice("BusLogic: PCI Bus %d Device %d I/O Address " "0x%X PCI Address 0x%X\n", NULL, Bus, Device, IO_Address, PCI_Address); } if (BusLogic_ProbeInfoCount < BusLogic_MaxHostAdapters) { struct BusLogic_ProbeInfo *ProbeInfo = &BusLogic_ProbeInfoList[BusLogic_ProbeInfoCount++]; ProbeInfo->HostAdapterType = BusLogic_FlashPoint; ProbeInfo->HostAdapterBusType = BusLogic_PCI_Bus; ProbeInfo->IO_Address = IO_Address; ProbeInfo->PCI_Address = PCI_Address; ProbeInfo->Bus = Bus; ProbeInfo->Device = Device; ProbeInfo->IRQ_Channel = IRQ_Channel; ProbeInfo->PCI_Device = PCI_Device; FlashPointCount++; } else BusLogic_Warning("BusLogic: Too many Host Adapters " "detected\n", NULL); #else BusLogic_Error("BusLogic: FlashPoint Host Adapter detected at " "PCI Bus %d Device %d\n", NULL, Bus, Device); BusLogic_Error("BusLogic: I/O Address 0x%X PCI Address 0x%X, irq %d, " "but FlashPoint\n", NULL, IO_Address, PCI_Address, IRQ_Channel); BusLogic_Error("BusLogic: support was omitted in this kernel " "configuration.\n", NULL); #endif } /* The FlashPoint BIOS will scan for FlashPoint Host Adapters in the order of increasing PCI Bus and Device Number, so sort the probe information into the same order the BIOS uses. */ BusLogic_SortProbeInfo(&BusLogic_ProbeInfoList[FlashPointIndex], FlashPointCount); return FlashPointCount; } /* BusLogic_InitializeProbeInfoList initializes the list of I/O Address and Bus Probe Information to be checked for potential BusLogic SCSI Host Adapters by interrogating the PCI Configuration Space on PCI machines as well as from the list of standard BusLogic MultiMaster ISA I/O Addresses. By default, if both FlashPoint and PCI MultiMaster Host Adapters are present, this driver will probe for FlashPoint Host Adapters first unless the BIOS primary disk is controlled by the first PCI MultiMaster Host Adapter, in which case MultiMaster Host Adapters will be probed first. The BusLogic Driver Options specifications "MultiMasterFirst" and "FlashPointFirst" can be used to force a particular probe order. */ static void __init BusLogic_InitializeProbeInfoList(struct BusLogic_HostAdapter *PrototypeHostAdapter) { /* If a PCI BIOS is present, interrogate it for MultiMaster and FlashPoint Host Adapters; otherwise, default to the standard ISA MultiMaster probe. */ if (!BusLogic_ProbeOptions.NoProbePCI) { if (BusLogic_ProbeOptions.MultiMasterFirst) { BusLogic_InitializeMultiMasterProbeInfo(PrototypeHostAdapter); BusLogic_InitializeFlashPointProbeInfo(PrototypeHostAdapter); } else if (BusLogic_ProbeOptions.FlashPointFirst) { BusLogic_InitializeFlashPointProbeInfo(PrototypeHostAdapter); BusLogic_InitializeMultiMasterProbeInfo(PrototypeHostAdapter); } else { int FlashPointCount = BusLogic_InitializeFlashPointProbeInfo(PrototypeHostAdapter); int PCIMultiMasterCount = BusLogic_InitializeMultiMasterProbeInfo(PrototypeHostAdapter); if (FlashPointCount > 0 && PCIMultiMasterCount > 0) { struct BusLogic_ProbeInfo *ProbeInfo = &BusLogic_ProbeInfoList[FlashPointCount]; struct BusLogic_HostAdapter *HostAdapter = PrototypeHostAdapter; struct BusLogic_FetchHostAdapterLocalRAMRequest FetchHostAdapterLocalRAMRequest; struct BusLogic_BIOSDriveMapByte Drive0MapByte; while (ProbeInfo->HostAdapterBusType != BusLogic_PCI_Bus) ProbeInfo++; HostAdapter->IO_Address = ProbeInfo->IO_Address; FetchHostAdapterLocalRAMRequest.ByteOffset = BusLogic_BIOS_BaseOffset + BusLogic_BIOS_DriveMapOffset + 0; FetchHostAdapterLocalRAMRequest.ByteCount = sizeof(Drive0MapByte); BusLogic_Command(HostAdapter, BusLogic_FetchHostAdapterLocalRAM, &FetchHostAdapterLocalRAMRequest, sizeof(FetchHostAdapterLocalRAMRequest), &Drive0MapByte, sizeof(Drive0MapByte)); /* If the Map Byte for BIOS Drive 0 indicates that BIOS Drive 0 is controlled by this PCI MultiMaster Host Adapter, then reverse the probe order so that MultiMaster Host Adapters are probed before FlashPoint Host Adapters. */ if (Drive0MapByte.DiskGeometry != BusLogic_BIOS_Disk_Not_Installed) { struct BusLogic_ProbeInfo SavedProbeInfo[BusLogic_MaxHostAdapters]; int MultiMasterCount = BusLogic_ProbeInfoCount - FlashPointCount; memcpy(SavedProbeInfo, BusLogic_ProbeInfoList, BusLogic_ProbeInfoCount * sizeof(struct BusLogic_ProbeInfo)); memcpy(&BusLogic_ProbeInfoList[0], &SavedProbeInfo[FlashPointCount], MultiMasterCount * sizeof(struct BusLogic_ProbeInfo)); memcpy(&BusLogic_ProbeInfoList[MultiMasterCount], &SavedProbeInfo[0], FlashPointCount * sizeof(struct BusLogic_ProbeInfo)); } } } } else BusLogic_InitializeProbeInfoListISA(PrototypeHostAdapter); } #endif /* CONFIG_PCI */ /* BusLogic_Failure prints a standardized error message, and then returns false. */ static boolean BusLogic_Failure(struct BusLogic_HostAdapter *HostAdapter, char *ErrorMessage) { BusLogic_AnnounceDriver(HostAdapter); if (HostAdapter->HostAdapterBusType == BusLogic_PCI_Bus) { BusLogic_Error("While configuring BusLogic PCI Host Adapter at\n", HostAdapter); BusLogic_Error("Bus %d Device %d I/O Address 0x%X PCI Address 0x%X:\n", HostAdapter, HostAdapter->Bus, HostAdapter->Device, HostAdapter->IO_Address, HostAdapter->PCI_Address); } else BusLogic_Error("While configuring BusLogic Host Adapter at " "I/O Address 0x%X:\n", HostAdapter, HostAdapter->IO_Address); BusLogic_Error("%s FAILED - DETACHING\n", HostAdapter, ErrorMessage); if (BusLogic_CommandFailureReason != NULL) BusLogic_Error("ADDITIONAL FAILURE INFO - %s\n", HostAdapter, BusLogic_CommandFailureReason); return false; } /* BusLogic_ProbeHostAdapter probes for a BusLogic Host Adapter. */ static boolean __init BusLogic_ProbeHostAdapter(struct BusLogic_HostAdapter *HostAdapter) { union BusLogic_StatusRegister StatusRegister; union BusLogic_InterruptRegister InterruptRegister; union BusLogic_GeometryRegister GeometryRegister; /* FlashPoint Host Adapters are Probed by the FlashPoint SCCB Manager. */ if (BusLogic_FlashPointHostAdapterP(HostAdapter)) { struct FlashPoint_Info *FlashPointInfo = &HostAdapter->FlashPointInfo; FlashPointInfo->BaseAddress = (u32) HostAdapter->IO_Address; FlashPointInfo->IRQ_Channel = HostAdapter->IRQ_Channel; FlashPointInfo->Present = false; if (!(FlashPoint_ProbeHostAdapter(FlashPointInfo) == 0 && FlashPointInfo->Present)) { BusLogic_Error("BusLogic: FlashPoint Host Adapter detected at " "PCI Bus %d Device %d\n", HostAdapter, HostAdapter->Bus, HostAdapter->Device); BusLogic_Error("BusLogic: I/O Address 0x%X PCI Address 0x%X, " "but FlashPoint\n", HostAdapter, HostAdapter->IO_Address, HostAdapter->PCI_Address); BusLogic_Error("BusLogic: Probe Function failed to validate it.\n", HostAdapter); return false; } if (BusLogic_GlobalOptions.TraceProbe) BusLogic_Notice("BusLogic_Probe(0x%X): FlashPoint Found\n", HostAdapter, HostAdapter->IO_Address); /* Indicate the Host Adapter Probe completed successfully. */ return true; } /* Read the Status, Interrupt, and Geometry Registers to test if there are I/O ports that respond, and to check the values to determine if they are from a BusLogic Host Adapter. A nonexistent I/O port will return 0xFF, in which case there is definitely no BusLogic Host Adapter at this base I/O Address. The test here is a subset of that used by the BusLogic Host Adapter BIOS. */ StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter); InterruptRegister.All = BusLogic_ReadInterruptRegister(HostAdapter); GeometryRegister.All = BusLogic_ReadGeometryRegister(HostAdapter); if (BusLogic_GlobalOptions.TraceProbe) BusLogic_Notice("BusLogic_Probe(0x%X): Status 0x%02X, Interrupt 0x%02X, " "Geometry 0x%02X\n", HostAdapter, HostAdapter->IO_Address, StatusRegister.All, InterruptRegister.All, GeometryRegister.All); if (StatusRegister.All == 0 || StatusRegister.sr.DiagnosticActive || StatusRegister.sr.CommandParameterRegisterBusy || StatusRegister.sr.Reserved || StatusRegister.sr.CommandInvalid || InterruptRegister.ir.Reserved != 0) return false; /* Check the undocumented Geometry Register to test if there is an I/O port that responded. Adaptec Host Adapters do not implement the Geometry Register, so this test helps serve to avoid incorrectly recognizing an Adaptec 1542A or 1542B as a BusLogic. Unfortunately, the Adaptec 1542C series does respond to the Geometry Register I/O port, but it will be rejected later when the Inquire Extended Setup Information command is issued in BusLogic_CheckHostAdapter. The AMI FastDisk Host Adapter is a BusLogic clone that implements the same interface as earlier BusLogic Host Adapters, including the undocumented commands, and is therefore supported by this driver. However, the AMI FastDisk always returns 0x00 upon reading the Geometry Register, so the extended translation option should always be left disabled on the AMI FastDisk. */ if (GeometryRegister.All == 0xFF) return false; /* Indicate the Host Adapter Probe completed successfully. */ return true; } /* BusLogic_HardwareResetHostAdapter issues a Hardware Reset to the Host Adapter and waits for Host Adapter Diagnostics to complete. If HardReset is true, a Hard Reset is performed which also initiates a SCSI Bus Reset. Otherwise, a Soft Reset is performed which only resets the Host Adapter without forcing a SCSI Bus Reset. */ static boolean BusLogic_HardwareResetHostAdapter(struct BusLogic_HostAdapter *HostAdapter, boolean HardReset) { union BusLogic_StatusRegister StatusRegister; int TimeoutCounter; /* FlashPoint Host Adapters are Hard Reset by the FlashPoint SCCB Manager. */ if (BusLogic_FlashPointHostAdapterP(HostAdapter)) { struct FlashPoint_Info *FlashPointInfo = &HostAdapter->FlashPointInfo; FlashPointInfo->HostSoftReset = !HardReset; FlashPointInfo->ReportDataUnderrun = true; HostAdapter->CardHandle = FlashPoint_HardwareResetHostAdapter(FlashPointInfo); if (HostAdapter->CardHandle == FlashPoint_BadCardHandle) return false; /* Indicate the Host Adapter Hard Reset completed successfully. */ return true; } /* Issue a Hard Reset or Soft Reset Command to the Host Adapter. The Host Adapter should respond by setting Diagnostic Active in the Status Register. */ if (HardReset) BusLogic_HardReset(HostAdapter); else BusLogic_SoftReset(HostAdapter); /* Wait until Diagnostic Active is set in the Status Register. */ TimeoutCounter = 5 * 10000; while (--TimeoutCounter >= 0) { StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter); if (StatusRegister.sr.DiagnosticActive) break; udelay(100); } if (BusLogic_GlobalOptions.TraceHardwareReset) BusLogic_Notice("BusLogic_HardwareReset(0x%X): Diagnostic Active, " "Status 0x%02X\n", HostAdapter, HostAdapter->IO_Address, StatusRegister.All); if (TimeoutCounter < 0) return false; /* Wait 100 microseconds to allow completion of any initial diagnostic activity which might leave the contents of the Status Register unpredictable. */ udelay(100); /* Wait until Diagnostic Active is reset in the Status Register. */ TimeoutCounter = 10 * 10000; while (--TimeoutCounter >= 0) { StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter); if (!StatusRegister.sr.DiagnosticActive) break; udelay(100); } if (BusLogic_GlobalOptions.TraceHardwareReset) BusLogic_Notice("BusLogic_HardwareReset(0x%X): Diagnostic Completed, " "Status 0x%02X\n", HostAdapter, HostAdapter->IO_Address, StatusRegister.All); if (TimeoutCounter < 0) return false; /* Wait until at least one of the Diagnostic Failure, Host Adapter Ready, or Data In Register Ready bits is set in the Status Register. */ TimeoutCounter = 10000; while (--TimeoutCounter >= 0) { StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter); if (StatusRegister.sr.DiagnosticFailure || StatusRegister.sr.HostAdapterReady || StatusRegister.sr.DataInRegisterReady) break; udelay(100); } if (BusLogic_GlobalOptions.TraceHardwareReset) BusLogic_Notice("BusLogic_HardwareReset(0x%X): Host Adapter Ready, " "Status 0x%02X\n", HostAdapter, HostAdapter->IO_Address, StatusRegister.All); if (TimeoutCounter < 0) return false; /* If Diagnostic Failure is set or Host Adapter Ready is reset, then an error occurred during the Host Adapter diagnostics. If Data In Register Ready is set, then there is an Error Code available. */ if (StatusRegister.sr.DiagnosticFailure || !StatusRegister.sr.HostAdapterReady) { BusLogic_CommandFailureReason = NULL; BusLogic_Failure(HostAdapter, "HARD RESET DIAGNOSTICS"); BusLogic_Error("HOST ADAPTER STATUS REGISTER = %02X\n", HostAdapter, StatusRegister.All); if (StatusRegister.sr.DataInRegisterReady) { unsigned char ErrorCode = BusLogic_ReadDataInRegister(HostAdapter); BusLogic_Error("HOST ADAPTER ERROR CODE = %d\n", HostAdapter, ErrorCode); } return false; } /* Indicate the Host Adapter Hard Reset completed successfully. */ return true; } /* BusLogic_CheckHostAdapter checks to be sure this really is a BusLogic Host Adapter. */ static boolean __init BusLogic_CheckHostAdapter(struct BusLogic_HostAdapter *HostAdapter) { struct BusLogic_ExtendedSetupInformation ExtendedSetupInformation; unsigned char RequestedReplyLength; boolean Result = true; /* FlashPoint Host Adapters do not require this protection. */ if (BusLogic_FlashPointHostAdapterP(HostAdapter)) return true; /* Issue the Inquire Extended Setup Information command. Only genuine BusLogic Host Adapters and true clones support this command. Adaptec 1542C series Host Adapters that respond to the Geometry Register I/O port will fail this command. */ RequestedReplyLength = sizeof(ExtendedSetupInformation); if (BusLogic_Command(HostAdapter, BusLogic_InquireExtendedSetupInformation, &RequestedReplyLength, sizeof(RequestedReplyLength), &ExtendedSetupInformation, sizeof(ExtendedSetupInformation)) != sizeof(ExtendedSetupInformation)) Result = false; /* Provide tracing information if requested and return. */ if (BusLogic_GlobalOptions.TraceProbe) BusLogic_Notice("BusLogic_Check(0x%X): MultiMaster %s\n", HostAdapter, HostAdapter->IO_Address, (Result ? "Found" : "Not Found")); return Result; } /* BusLogic_ReadHostAdapterConfiguration reads the Configuration Information from Host Adapter and initializes the Host Adapter structure. */ static boolean __init BusLogic_ReadHostAdapterConfiguration(struct BusLogic_HostAdapter *HostAdapter) { struct BusLogic_BoardID BoardID; struct BusLogic_Configuration Configuration; struct BusLogic_SetupInformation SetupInformation; struct BusLogic_ExtendedSetupInformation ExtendedSetupInformation; unsigned char HostAdapterModelNumber[5]; unsigned char FirmwareVersion3rdDigit; unsigned char FirmwareVersionLetter; struct BusLogic_PCIHostAdapterInformation PCIHostAdapterInformation; struct BusLogic_FetchHostAdapterLocalRAMRequest FetchHostAdapterLocalRAMRequest; struct BusLogic_AutoSCSIData AutoSCSIData; union BusLogic_GeometryRegister GeometryRegister; unsigned char RequestedReplyLength; unsigned char *TargetPointer, Character; int TargetID, i; /* Configuration Information for FlashPoint Host Adapters is provided in the FlashPoint_Info structure by the FlashPoint SCCB Manager's Probe Function. Initialize fields in the Host Adapter structure from the FlashPoint_Info structure. */ if (BusLogic_FlashPointHostAdapterP(HostAdapter)) { struct FlashPoint_Info *FlashPointInfo = &HostAdapter->FlashPointInfo; TargetPointer = HostAdapter->ModelName; *TargetPointer++ = 'B'; *TargetPointer++ = 'T'; *TargetPointer++ = '-'; for (i = 0; i < sizeof(FlashPointInfo->ModelNumber); i++) *TargetPointer++ = FlashPointInfo->ModelNumber[i]; *TargetPointer++ = '\0'; strcpy(HostAdapter->FirmwareVersion, FlashPoint_FirmwareVersion); HostAdapter->SCSI_ID = FlashPointInfo->SCSI_ID; HostAdapter->ExtendedTranslationEnabled = FlashPointInfo->ExtendedTranslationEnabled; HostAdapter->ParityCheckingEnabled = FlashPointInfo->ParityCheckingEnabled; HostAdapter->BusResetEnabled = !FlashPointInfo->HostSoftReset; HostAdapter->LevelSensitiveInterrupt = true; HostAdapter->HostWideSCSI = FlashPointInfo->HostWideSCSI; HostAdapter->HostDifferentialSCSI = false; HostAdapter->HostSupportsSCAM = true; HostAdapter->HostUltraSCSI = true; HostAdapter->ExtendedLUNSupport = true; HostAdapter->TerminationInfoValid = true; HostAdapter->LowByteTerminated = FlashPointInfo->LowByteTerminated; HostAdapter->HighByteTerminated = FlashPointInfo->HighByteTerminated; HostAdapter->SCAM_Enabled = FlashPointInfo->SCAM_Enabled; HostAdapter->SCAM_Level2 = FlashPointInfo->SCAM_Level2; HostAdapter->DriverScatterGatherLimit = BusLogic_ScatterGatherLimit; HostAdapter->MaxTargetDevices = (HostAdapter->HostWideSCSI ? 16 : 8); HostAdapter->MaxLogicalUnits = 32; HostAdapter->InitialCCBs = 4 * BusLogic_CCB_AllocationGroupSize; HostAdapter->IncrementalCCBs = BusLogic_CCB_AllocationGroupSize; HostAdapter->DriverQueueDepth = 255; HostAdapter->HostAdapterQueueDepth = HostAdapter->DriverQueueDepth; HostAdapter->SynchronousPermitted = FlashPointInfo->SynchronousPermitted; HostAdapter->FastPermitted = FlashPointInfo->FastPermitted; HostAdapter->UltraPermitted = FlashPointInfo->UltraPermitted; HostAdapter->WidePermitted = FlashPointInfo->WidePermitted; HostAdapter->DisconnectPermitted = FlashPointInfo->DisconnectPermitted; HostAdapter->TaggedQueuingPermitted = 0xFFFF; goto Common; } /* Issue the Inquire Board ID command. */ if (BusLogic_Command(HostAdapter, BusLogic_InquireBoardID, NULL, 0, &BoardID, sizeof(BoardID)) != sizeof(BoardID)) return BusLogic_Failure(HostAdapter, "INQUIRE BOARD ID"); /* Issue the Inquire Configuration command. */ if (BusLogic_Command(HostAdapter, BusLogic_InquireConfiguration, NULL, 0, &Configuration, sizeof(Configuration)) != sizeof(Configuration)) return BusLogic_Failure(HostAdapter, "INQUIRE CONFIGURATION"); /* Issue the Inquire Setup Information command. */ RequestedReplyLength = sizeof(SetupInformation); if (BusLogic_Command(HostAdapter, BusLogic_InquireSetupInformation, &RequestedReplyLength, sizeof(RequestedReplyLength), &SetupInformation, sizeof(SetupInformation)) != sizeof(SetupInformation)) return BusLogic_Failure(HostAdapter, "INQUIRE SETUP INFORMATION"); /* Issue the Inquire Extended Setup Information command. */ RequestedReplyLength = sizeof(ExtendedSetupInformation); if (BusLogic_Command(HostAdapter, BusLogic_InquireExtendedSetupInformation, &RequestedReplyLength, sizeof(RequestedReplyLength), &ExtendedSetupInformation, sizeof(ExtendedSetupInformation)) != sizeof(ExtendedSetupInformation)) return BusLogic_Failure(HostAdapter, "INQUIRE EXTENDED SETUP INFORMATION"); /* Issue the Inquire Firmware Version 3rd Digit command. */ FirmwareVersion3rdDigit = '\0'; if (BoardID.FirmwareVersion1stDigit > '0') if (BusLogic_Command(HostAdapter, BusLogic_InquireFirmwareVersion3rdDigit, NULL, 0, &FirmwareVersion3rdDigit, sizeof(FirmwareVersion3rdDigit)) != sizeof(FirmwareVersion3rdDigit)) return BusLogic_Failure(HostAdapter, "INQUIRE FIRMWARE 3RD DIGIT"); /* Issue the Inquire Host Adapter Model Number command. */ if (ExtendedSetupInformation.BusType == 'A' && BoardID.FirmwareVersion1stDigit == '2') /* BusLogic BT-542B ISA 2.xx */ strcpy(HostAdapterModelNumber, "542B"); else if (ExtendedSetupInformation.BusType == 'E' && BoardID.FirmwareVersion1stDigit == '2' && (BoardID.FirmwareVersion2ndDigit <= '1' || (BoardID.FirmwareVersion2ndDigit == '2' && FirmwareVersion3rdDigit == '0'))) /* BusLogic BT-742A EISA 2.1x or 2.20 */ strcpy(HostAdapterModelNumber, "742A"); else if (ExtendedSetupInformation.BusType == 'E' && BoardID.FirmwareVersion1stDigit == '0') /* AMI FastDisk EISA Series 441 0.x */ strcpy(HostAdapterModelNumber, "747A"); else { RequestedReplyLength = sizeof(HostAdapterModelNumber); if (BusLogic_Command(HostAdapter, BusLogic_InquireHostAdapterModelNumber, &RequestedReplyLength, sizeof(RequestedReplyLength), &HostAdapterModelNumber, sizeof(HostAdapterModelNumber)) != sizeof(HostAdapterModelNumber)) return BusLogic_Failure(HostAdapter, "INQUIRE HOST ADAPTER MODEL NUMBER"); } /* BusLogic MultiMaster Host Adapters can be identified by their model number and the major version number of their firmware as follows: 5.xx BusLogic "W" Series Host Adapters: BT-948/958/958D 4.xx BusLogic "C" Series Host Adapters: BT-946C/956C/956CD/747C/757C/757CD/445C/545C/540CF 3.xx BusLogic "S" Series Host Adapters: BT-747S/747D/757S/757D/445S/545S/542D BT-542B/742A (revision H) 2.xx BusLogic "A" Series Host Adapters: BT-542B/742A (revision G and below) 0.xx AMI FastDisk VLB/EISA BusLogic Clone Host Adapter */ /* Save the Model Name and Host Adapter Name in the Host Adapter structure. */ TargetPointer = HostAdapter->ModelName; *TargetPointer++ = 'B'; *TargetPointer++ = 'T'; *TargetPointer++ = '-'; for (i = 0; i < sizeof(HostAdapterModelNumber); i++) { Character = HostAdapterModelNumber[i]; if (Character == ' ' || Character == '\0') break; *TargetPointer++ = Character; } *TargetPointer++ = '\0'; /* Save the Firmware Version in the Host Adapter structure. */ TargetPointer = HostAdapter->FirmwareVersion; *TargetPointer++ = BoardID.FirmwareVersion1stDigit; *TargetPointer++ = '.'; *TargetPointer++ = BoardID.FirmwareVersion2ndDigit; if (FirmwareVersion3rdDigit != ' ' && FirmwareVersion3rdDigit != '\0') *TargetPointer++ = FirmwareVersion3rdDigit; *TargetPointer = '\0'; /* Issue the Inquire Firmware Version Letter command. */ if (strcmp(HostAdapter->FirmwareVersion, "3.3") >= 0) { if (BusLogic_Command(HostAdapter, BusLogic_InquireFirmwareVersionLetter, NULL, 0, &FirmwareVersionLetter, sizeof(FirmwareVersionLetter)) != sizeof(FirmwareVersionLetter)) return BusLogic_Failure(HostAdapter, "INQUIRE FIRMWARE VERSION LETTER"); if (FirmwareVersionLetter != ' ' && FirmwareVersionLetter != '\0') *TargetPointer++ = FirmwareVersionLetter; *TargetPointer = '\0'; } /* Save the Host Adapter SCSI ID in the Host Adapter structure. */ HostAdapter->SCSI_ID = Configuration.HostAdapterID; /* Determine the Bus Type and save it in the Host Adapter structure, determine and save the IRQ Channel if necessary, and determine and save the DMA Channel for ISA Host Adapters. */ HostAdapter->HostAdapterBusType = BusLogic_HostAdapterBusTypes[HostAdapter->ModelName[3] - '4']; if (HostAdapter->IRQ_Channel == 0) { if (Configuration.IRQ_Channel9) HostAdapter->IRQ_Channel = 9; else if (Configuration.IRQ_Channel10) HostAdapter->IRQ_Channel = 10; else if (Configuration.IRQ_Channel11) HostAdapter->IRQ_Channel = 11; else if (Configuration.IRQ_Channel12) HostAdapter->IRQ_Channel = 12; else if (Configuration.IRQ_Channel14) HostAdapter->IRQ_Channel = 14; else if (Configuration.IRQ_Channel15) HostAdapter->IRQ_Channel = 15; } if (HostAdapter->HostAdapterBusType == BusLogic_ISA_Bus) { if (Configuration.DMA_Channel5) HostAdapter->DMA_Channel = 5; else if (Configuration.DMA_Channel6) HostAdapter->DMA_Channel = 6; else if (Configuration.DMA_Channel7) HostAdapter->DMA_Channel = 7; } /* Determine whether Extended Translation is enabled and save it in the Host Adapter structure. */ GeometryRegister.All = BusLogic_ReadGeometryRegister(HostAdapter); HostAdapter->ExtendedTranslationEnabled = GeometryRegister.gr.ExtendedTranslationEnabled; /* Save the Scatter Gather Limits, Level Sensitive Interrupt flag, Wide SCSI flag, Differential SCSI flag, SCAM Supported flag, and Ultra SCSI flag in the Host Adapter structure. */ HostAdapter->HostAdapterScatterGatherLimit = ExtendedSetupInformation.ScatterGatherLimit; HostAdapter->DriverScatterGatherLimit = HostAdapter->HostAdapterScatterGatherLimit; if (HostAdapter->HostAdapterScatterGatherLimit > BusLogic_ScatterGatherLimit) HostAdapter->DriverScatterGatherLimit = BusLogic_ScatterGatherLimit; if (ExtendedSetupInformation.Misc.LevelSensitiveInterrupt) HostAdapter->LevelSensitiveInterrupt = true; HostAdapter->HostWideSCSI = ExtendedSetupInformation.HostWideSCSI; HostAdapter->HostDifferentialSCSI = ExtendedSetupInformation.HostDifferentialSCSI; HostAdapter->HostSupportsSCAM = ExtendedSetupInformation.HostSupportsSCAM; HostAdapter->HostUltraSCSI = ExtendedSetupInformation.HostUltraSCSI; /* Determine whether Extended LUN Format CCBs are supported and save the information in the Host Adapter structure. */ if (HostAdapter->FirmwareVersion[0] == '5' || (HostAdapter->FirmwareVersion[0] == '4' && HostAdapter->HostWideSCSI)) HostAdapter->ExtendedLUNSupport = true; /* Issue the Inquire PCI Host Adapter Information command to read the Termination Information from "W" series MultiMaster Host Adapters. */ if (HostAdapter->FirmwareVersion[0] == '5') { if (BusLogic_Command(HostAdapter, BusLogic_InquirePCIHostAdapterInformation, NULL, 0, &PCIHostAdapterInformation, sizeof(PCIHostAdapterInformation)) != sizeof(PCIHostAdapterInformation)) return BusLogic_Failure(HostAdapter, "INQUIRE PCI HOST ADAPTER INFORMATION"); /* Save the Termination Information in the Host Adapter structure. */ if (PCIHostAdapterInformation.GenericInfoValid) { HostAdapter->TerminationInfoValid = true; HostAdapter->LowByteTerminated = PCIHostAdapterInformation.LowByteTerminated; HostAdapter->HighByteTerminated = PCIHostAdapterInformation.HighByteTerminated; } } /* Issue the Fetch Host Adapter Local RAM command to read the AutoSCSI data from "W" and "C" series MultiMaster Host Adapters. */ if (HostAdapter->FirmwareVersion[0] >= '4') { FetchHostAdapterLocalRAMRequest.ByteOffset = BusLogic_AutoSCSI_BaseOffset; FetchHostAdapterLocalRAMRequest.ByteCount = sizeof(AutoSCSIData); if (BusLogic_Command(HostAdapter, BusLogic_FetchHostAdapterLocalRAM, &FetchHostAdapterLocalRAMRequest, sizeof(FetchHostAdapterLocalRAMRequest), &AutoSCSIData, sizeof(AutoSCSIData)) != sizeof(AutoSCSIData)) return BusLogic_Failure(HostAdapter, "FETCH HOST ADAPTER LOCAL RAM"); /* Save the Parity Checking Enabled, Bus Reset Enabled, and Termination Information in the Host Adapter structure. */ HostAdapter->ParityCheckingEnabled = AutoSCSIData.ParityCheckingEnabled; HostAdapter->BusResetEnabled = AutoSCSIData.BusResetEnabled; if (HostAdapter->FirmwareVersion[0] == '4') { HostAdapter->TerminationInfoValid = true; HostAdapter->LowByteTerminated = AutoSCSIData.LowByteTerminated; HostAdapter->HighByteTerminated = AutoSCSIData.HighByteTerminated; } /* Save the Wide Permitted, Fast Permitted, Synchronous Permitted, Disconnect Permitted, Ultra Permitted, and SCAM Information in the Host Adapter structure. */ HostAdapter->WidePermitted = AutoSCSIData.WidePermitted; HostAdapter->FastPermitted = AutoSCSIData.FastPermitted; HostAdapter->SynchronousPermitted = AutoSCSIData.SynchronousPermitted; HostAdapter->DisconnectPermitted = AutoSCSIData.DisconnectPermitted; if (HostAdapter->HostUltraSCSI) HostAdapter->UltraPermitted = AutoSCSIData.UltraPermitted; if (HostAdapter->HostSupportsSCAM) { HostAdapter->SCAM_Enabled = AutoSCSIData.SCAM_Enabled; HostAdapter->SCAM_Level2 = AutoSCSIData.SCAM_Level2; } } /* Initialize fields in the Host Adapter structure for "S" and "A" series MultiMaster Host Adapters. */ if (HostAdapter->FirmwareVersion[0] < '4') { if (SetupInformation.SynchronousInitiationEnabled) { HostAdapter->SynchronousPermitted = 0xFF; if (HostAdapter->HostAdapterBusType == BusLogic_EISA_Bus) { if (ExtendedSetupInformation.Misc.FastOnEISA) HostAdapter->FastPermitted = 0xFF; if (strcmp(HostAdapter->ModelName, "BT-757") == 0) HostAdapter->WidePermitted = 0xFF; } } HostAdapter->DisconnectPermitted = 0xFF; HostAdapter->ParityCheckingEnabled = SetupInformation.ParityCheckingEnabled; HostAdapter->BusResetEnabled = true; } /* Determine the maximum number of Target IDs and Logical Units supported by this driver for Wide and Narrow Host Adapters. */ HostAdapter->MaxTargetDevices = (HostAdapter->HostWideSCSI ? 16 : 8); HostAdapter->MaxLogicalUnits = (HostAdapter->ExtendedLUNSupport ? 32 : 8); /* Select appropriate values for the Mailbox Count, Driver Queue Depth, Initial CCBs, and Incremental CCBs variables based on whether or not Strict Round Robin Mode is supported. If Strict Round Robin Mode is supported, then there is no performance degradation in using the maximum possible number of Outgoing and Incoming Mailboxes and allowing the Tagged and Untagged Queue Depths to determine the actual utilization. If Strict Round Robin Mode is not supported, then the Host Adapter must scan all the Outgoing Mailboxes whenever an Outgoing Mailbox entry is made, which can cause a substantial performance penalty. The host adapters actually have room to store the following number