From 7dcdcbef5d2b60d1db68fd2c07351f7afd8ad376 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sat, 21 Oct 2006 17:09:53 +0100 Subject: [MTD] NAND: Combined oob buffer so it's contiguous with data MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Ditch the separate oobrbuf and oobwbuf fields from the chip buffers, and use only a single buffer immediately after the data. This accommodates NAND controllers such as the OLPC CAFÉ chip, which can't do scatter/gather DMA so needs the OOB buffer to be contiguous with the data, for both read and write. Signed-off-by: David Woodhouse --- include/linux/mtd/nand.h | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'include') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 70420bbae8..6fc3e07497 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -286,9 +286,7 @@ struct nand_ecc_ctrl { * struct nand_buffers - buffer structure for read/write * @ecccalc: buffer for calculated ecc * @ecccode: buffer for ecc read from flash - * @oobwbuf: buffer for write oob data * @databuf: buffer for data - dynamically sized - * @oobrbuf: buffer to read oob data * * Do not change the order of buffers. databuf and oobrbuf must be in * consecutive order. @@ -296,9 +294,7 @@ struct nand_ecc_ctrl { struct nand_buffers { uint8_t ecccalc[NAND_MAX_OOBSIZE]; uint8_t ecccode[NAND_MAX_OOBSIZE]; - uint8_t oobwbuf[NAND_MAX_OOBSIZE]; - uint8_t databuf[NAND_MAX_PAGESIZE]; - uint8_t oobrbuf[NAND_MAX_OOBSIZE]; + uint8_t databuf[NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE]; }; /** -- cgit v1.2.2 From 2c22120fbd017d78ad2b6825ba573db3ef539bca Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Thu, 16 Nov 2006 11:23:48 +0900 Subject: MTD: OneNAND: interrupt based wait support We can use the two methods to wait. 1. polling: read interrupt status register 2. interrupt: use kernel ineterrupt mechanism To use interrupt method, you first connect onenand interrupt pin to your platform and configure interrupt properly Signed-off-by: Kyungmin Park --- include/linux/mtd/onenand.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include') diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index 6f045b586e..df963f1f6f 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -13,6 +13,7 @@ #define __LINUX_MTD_ONENAND_H #include +#include #include #include @@ -120,6 +121,9 @@ struct onenand_chip { int (*block_markbad)(struct mtd_info *mtd, loff_t ofs); int (*scan_bbt)(struct mtd_info *mtd); + struct completion complete; + int irq; + spinlock_t chip_lock; wait_queue_head_t wq; onenand_state_t state; -- cgit v1.2.2 From 08f782b60a633cbd926ef5e49de303a752390719 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Thu, 16 Nov 2006 11:29:39 +0900 Subject: [MTD] OneNAND: lock support Now you can use mtd lock inferface on OneNAND The idea is from Nemakal, Vijaya, thanks Signed-off-by: Kyungmin Park --- include/linux/mtd/onenand.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index df963f1f6f..62ca0f4298 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -34,7 +34,6 @@ typedef enum { FL_WRITING, FL_ERASING, FL_SYNCING, - FL_UNLOCKING, FL_LOCKING, FL_RESETING, FL_OTPING, -- cgit v1.2.2 From f4f91ac3c833abbd7181ff2122c6b48a653b4e55 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Thu, 16 Nov 2006 12:03:56 +0900 Subject: [MTD] OneNAND: Single bit error detection Idea from Jarkko Lavinen Signed-off-by: Jarkko Lavinen Signed-off-by: Kyungmin Park --- include/linux/mtd/onenand_regs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h index 9e409fe6de..e31c8f5d42 100644 --- a/include/linux/mtd/onenand_regs.h +++ b/include/linux/mtd/onenand_regs.h @@ -179,6 +179,7 @@ * ECC Status Reigser FF00h (R) */ #define ONENAND_ECC_1BIT (1 << 0) +#define ONENAND_ECC_1BIT_ALL (0x5555) #define ONENAND_ECC_2BIT (1 << 1) #define ONENAND_ECC_2BIT_ALL (0xAAAA) -- cgit v1.2.2 From 191876729901d0c8dab8a331f9a1e4b73a56457b Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Fri, 27 Oct 2006 09:09:33 +0100 Subject: [MTD] Allow variable block sizes in mtd_blkdevs Currently, mtd_blkdevs enforces a block size of 512, even if the drivers can seemingly request a different size. This patch fixes mtd_blkdevs so block sizes other than 512 work correctly. Signed-off-by: Richard Purdie Signed-off-by: David Woodhouse --- include/linux/mtd/blktrans.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h index 72fc68c5ee..9a6e2f953c 100644 --- a/include/linux/mtd/blktrans.h +++ b/include/linux/mtd/blktrans.h @@ -24,7 +24,6 @@ struct mtd_blktrans_dev { struct mtd_info *mtd; struct mutex lock; int devnum; - int blksize; unsigned long size; int readonly; void *blkcore_priv; /* gendisk in 2.5, devfs_handle in 2.4 */ @@ -36,6 +35,8 @@ struct mtd_blktrans_ops { char *name; int major; int part_bits; + int blksize; + int blkshift; /* Access functions */ int (*readsect)(struct mtd_blktrans_dev *dev, -- cgit v1.2.2 From 7014568bad55c20b7ee4f439d78c9e875912d51f Mon Sep 17 00:00:00 2001 From: Vitaly Wool Date: Fri, 3 Nov 2006 18:20:38 +0300 Subject: [MTD] [NAND] remove len/ooblen confusion. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As was discussed between Ricard Wanderlöf, David Woodhouse, Artem Bityutskiy and me, the current API for reading/writing OOB is confusing. The thing that introduces confusion is the need to specify ops.len together with ops.ooblen for reads/writes that concern only OOB not data area. So, ops.len is overloaded: when ops.datbuf != NULL it serves to specify the length of the data read, and when ops.datbuf == NULL, it serves to specify the full OOB read length. The patch inlined below is the slightly updated version of the previous patch serving the same purpose, but with the new Artem's comments taken into account. Artem, BTW, thanks a lot for your valuable input! Signed-off-by: Vitaly Wool Signed-off-by: David Woodhouse --- include/linux/mtd/mtd.h | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'include') diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 94a443d452..4fc391ec9d 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -75,15 +75,12 @@ typedef enum { * struct mtd_oob_ops - oob operation operands * @mode: operation mode * - * @len: number of bytes to write/read. When a data buffer is given - * (datbuf != NULL) this is the number of data bytes. When - * no data buffer is available this is the number of oob bytes. + * @len: number of data bytes to write/read * - * @retlen: number of bytes written/read. When a data buffer is given - * (datbuf != NULL) this is the number of data bytes. When - * no data buffer is available this is the number of oob bytes. + * @retlen: number of data bytes written/read * - * @ooblen: number of oob bytes per page + * @ooblen: number of oob bytes to write/read + * @oobretlen: number of oob bytes written/read * @ooboffs: offset of oob data in the oob area (only relevant when * mode = MTD_OOB_PLACE) * @datbuf: data buffer - if NULL only oob data are read/written @@ -94,6 +91,7 @@ struct mtd_oob_ops { size_t len; size_t retlen; size_t ooblen; + size_t oobretlen; uint32_t ooboffs; uint8_t *datbuf; uint8_t *oobbuf; -- cgit v1.2.2 From c0fe10aef354912c38c43991dd38c16f1828cfe3 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 13 Nov 2006 13:47:43 +0200 Subject: [MTD] increase MAX_MTD_DEVICES Signed-off-by: Artem Bityutskiy --- include/linux/mtd/mtd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 4fc391ec9d..e34bbc98d4 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -23,7 +23,7 @@ #define MTD_CHAR_MAJOR 90 #define MTD_BLOCK_MAJOR 31 -#define MAX_MTD_DEVICES 16 +#define MAX_MTD_DEVICES 32 #define MTD_ERASE_PENDING 0x01 #define MTD_ERASING 0x02 -- cgit v1.2.2 From 29072b96078ffde36f03d51e6b5d0cff1ba8c7df Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Thu, 28 Sep 2006 15:38:36 +0200 Subject: [MTD] NAND: add subpage write support Many SLC NANDs support up to 4 writes at one NAND page. Add support of this feature. Signed-off-by: Artem Bityutskiy --- include/linux/mtd/mtd.h | 2 ++ include/linux/mtd/nand.h | 9 +++++++++ 2 files changed, 11 insertions(+) (limited to 'include') diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index e34bbc98d4..18acb6d003 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -200,6 +200,8 @@ struct mtd_info { /* ECC status information */ struct mtd_ecc_stats ecc_stats; + /* Subpage shift (NAND) */ + int subpage_sft; void *priv; diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 6fc3e07497..1aeedf27a1 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -166,6 +166,9 @@ typedef enum { * for all large page devices, as they do not support * autoincrement.*/ #define NAND_NO_READRDY 0x00000100 +/* Chip does not allow subpage writes */ +#define NAND_NO_SUBPAGE_WRITE 0x00000200 + /* Options valid for Samsung large page devices */ #define NAND_SAMSUNG_LP_OPTIONS \ @@ -193,6 +196,9 @@ typedef enum { /* Nand scan has allocated controller struct */ #define NAND_CONTROLLER_ALLOC 0x80000000 +/* Cell info constants */ +#define NAND_CI_CHIPNR_MSK 0x03 +#define NAND_CI_CELLTYPE_MSK 0x0C /* * nand_state_t - chip states @@ -341,6 +347,7 @@ struct nand_buffers { * @chipsize: [INTERN] the size of one chip for multichip arrays * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1 * @pagebuf: [INTERN] holds the pagenumber which is currently in data_buf + * @subpagesize: [INTERN] holds the subpagesize * @ecclayout: [REPLACEABLE] the default ecc placement scheme * @bbt: [INTERN] bad block table pointer * @bbt_td: [REPLACEABLE] bad block table descriptor for flash lookup @@ -388,6 +395,8 @@ struct nand_chip { unsigned long chipsize; int pagemask; int pagebuf; + int subpagesize; + uint8_t cellinfo; int badblockpos; nand_state_t state; -- cgit v1.2.2 From 7799308f34d3c3371a319559687c78c0f2506fcf Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 11 Oct 2006 14:52:44 +0300 Subject: [MTD] add get_mtd_device_nm() function This patch adds one more function to the MTD interface to make it possible to open MTD devices by their names, not only numbers. This is very handy in many situations. Also, MTD device number depend on load order and may vary, while names are fixed. Signed-off-by: Artem Bityutskiy --- include/linux/mtd/mtd.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 18acb6d003..89e937dfef 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -216,6 +216,7 @@ extern int add_mtd_device(struct mtd_info *mtd); extern int del_mtd_device (struct mtd_info *mtd); extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num); +extern struct mtd_info *get_mtd_device_nm(const char *name); extern void put_mtd_device(struct mtd_info *mtd); -- cgit v1.2.2 From 9fe912cea32aec18f860c95e8574410b5892481b Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 11 Oct 2006 14:52:45 +0300 Subject: [MTD] add get and put methods This patch adds get_device() and put_device() methods to the MTD description structure (struct mtd_info). These methods are called by MTD whenever the MTD device is get or put. They are needed when the underlying driver is something smarter then just flash chip driver, for example UBI. Signed-off-by: Artem Bityutskiy --- include/linux/mtd/mtd.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include') diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 89e937dfef..d644e57703 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -207,6 +207,13 @@ struct mtd_info { struct module *owner; int usecount; + + /* If the driver is something smart, like UBI, it may need to maintain + * its own reference counting. The below functions are only for driver. + * The driver may register its callbacks. These callbacks are not + * supposed to be called by MTD users */ + int (*get_device) (struct mtd_info *mtd); + void (*put_device) (struct mtd_info *mtd); }; -- cgit v1.2.2 From 60d84f9739a47d0ed8e19805d9056e39fba31c79 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Fri, 22 Dec 2006 16:21:54 +0900 Subject: [MTD] OneNAND: add subpage write support OneNAND supports up to 4 writes at one NAND page. Add support of this feature. Signed-off-by: Kyungmin Park --- include/linux/mtd/onenand.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index 62ca0f4298..fe3500d7d4 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -88,6 +88,7 @@ struct onenand_bufferram { * operation is in progress * @state: [INTERN] the current state of the OneNAND device * @page_buf: data buffer + * @subpagesize: [INTERN] holds the subpagesize * @ecclayout: [REPLACEABLE] the default ecc placement scheme * @bbm: [REPLACEABLE] pointer to Bad Block Management * @priv: [OPTIONAL] pointer to private chip date @@ -128,6 +129,7 @@ struct onenand_chip { onenand_state_t state; unsigned char *page_buf; + int subpagesize; struct nand_ecclayout *ecclayout; void *bbm; -- cgit v1.2.2 From a8de85d557004d6d4e4cf79ecd6b97339b986fe9 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Thu, 4 Jan 2007 09:51:26 +0200 Subject: [MTD] OneNAND: Implement read-while-load Read-while-load enables higher performance read operations. Signed-off-by: Adrian Hunter Signed-off-by: Kyungmin Park --- include/linux/mtd/onenand.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index fe3500d7d4..f775a7af38 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -143,6 +143,7 @@ struct onenand_chip { #define ONENAND_CURRENT_BUFFERRAM(this) (this->bufferram_index) #define ONENAND_NEXT_BUFFERRAM(this) (this->bufferram_index ^ 1) #define ONENAND_SET_NEXT_BUFFERRAM(this) (this->bufferram_index ^= 1) +#define ONENAND_SET_PREV_BUFFERRAM(this) (this->bufferram_index ^= 1) #define ONENAND_GET_SYS_CFG1(this) \ (this->read_word(this->base + ONENAND_REG_SYS_CFG1)) -- cgit v1.2.2 From 9ee79a3d372fcb6729893437f4923c5efd1f85db Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Mon, 22 Jan 2007 09:18:31 -0600 Subject: [PATCH] x86: fix PDA variables to work during boot The current PDA code, which went in in post 2.6.19 has a flaw in that it doesn't correctly cycle the GDT and %GS segment through the boot PDA, the CPU PDA and finally the per-cpu PDA. The bug generally doesn't show up if the boot CPU id is zero, but everything falls apart for a non zero boot CPU id. The basically kills voyager which is perfectly capable of doing non zero CPU id boots, so voyager currently won't boot without this. The fix is to be careful and actually do the GDT setups correctly. Signed-off-by: James Bottomley Cc: Andi Kleen Cc: Jeremy Fitzhardinge Cc: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-i386/processor.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/asm-i386/processor.h b/include/asm-i386/processor.h index a52d654404..359f10b54f 100644 --- a/include/asm-i386/processor.h +++ b/include/asm-i386/processor.h @@ -743,6 +743,7 @@ extern void enable_sep_cpu(void); extern int sysenter_setup(void); extern int init_gdt(int cpu, struct task_struct *idle); +extern void cpu_set_gdt(int); extern void secondary_cpu_init(void); #endif /* __ASM_I386_PROCESSOR_H */ -- cgit v1.2.2 From b3a242b75361936ab9a42c42c44ea35e79a9d4cd Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 11 Jan 2007 14:49:44 +0100 Subject: more ftape removal This patch removes some more ftape code. Signed-off-by: Adrian Bunk Signed-off-by: Jeff Garzik --- include/linux/Kbuild | 1 - include/linux/mtio.h | 146 ------------------------- include/linux/qic117.h | 290 ------------------------------------------------- 3 files changed, 437 deletions(-) delete mode 100644 include/linux/qic117.h (limited to 'include') diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 862e483cce..8c634f9df3 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -129,7 +129,6 @@ header-y += posix_types.h header-y += ppdev.h header-y += prctl.h header-y += ps2esdi.h -header-y += qic117.h header-y += qnxtypes.h header-y += quotaio_v1.h header-y += quotaio_v2.h diff --git a/include/linux/mtio.h b/include/linux/mtio.h index 8c66151821..6f8d2d45a8 100644 --- a/include/linux/mtio.h +++ b/include/linux/mtio.h @@ -10,7 +10,6 @@ #include #include -#include /* * Structures and definitions for mag tape io control commands @@ -116,32 +115,6 @@ struct mtget { #define MT_ISFTAPE_UNKNOWN 0x800000 /* obsolete */ #define MT_ISFTAPE_FLAG 0x800000 -struct mt_tape_info { - long t_type; /* device type id (mt_type) */ - char *t_name; /* descriptive name */ -}; - -#define MT_TAPE_INFO { \ - {MT_ISUNKNOWN, "Unknown type of tape device"}, \ - {MT_ISQIC02, "Generic QIC-02 tape streamer"}, \ - {MT_ISWT5150, "Wangtek 5150, QIC-150"}, \ - {MT_ISARCHIVE_5945L2, "Archive 5945L-2"}, \ - {MT_ISCMSJ500, "CMS Jumbo 500"}, \ - {MT_ISTDC3610, "Tandberg TDC 3610, QIC-24"}, \ - {MT_ISARCHIVE_VP60I, "Archive VP60i, QIC-02"}, \ - {MT_ISARCHIVE_2150L, "Archive Viper 2150L"}, \ - {MT_ISARCHIVE_2060L, "Archive Viper 2060L"}, \ - {MT_ISARCHIVESC499, "Archive SC-499 QIC-36 controller"}, \ - {MT_ISQIC02_ALL_FEATURES, "Generic QIC-02 tape, all features"}, \ - {MT_ISWT5099EEN24, "Wangtek 5099-een24, 60MB"}, \ - {MT_ISTEAC_MT2ST, "Teac MT-2ST 155mb data cassette drive"}, \ - {MT_ISEVEREX_FT40A, "Everex FT40A, QIC-40"}, \ - {MT_ISONSTREAM_SC, "OnStream SC-, DI-, DP-, or USB tape drive"}, \ - {MT_ISSCSI1, "Generic SCSI-1 tape"}, \ - {MT_ISSCSI2, "Generic SCSI-2 tape"}, \ - {0, NULL} \ -} - /* structure for MTIOCPOS - mag tape get position command */ @@ -150,130 +123,11 @@ struct mtpos { }; -/* structure for MTIOCVOLINFO, query information about the volume - * currently positioned at (zftape) - */ -struct mtvolinfo { - unsigned int mt_volno; /* vol-number */ - unsigned int mt_blksz; /* blocksize used when recording */ - unsigned int mt_rawsize; /* raw tape space consumed, in kb */ - unsigned int mt_size; /* volume size after decompression, in kb */ - unsigned int mt_cmpr:1; /* this volume has been compressed */ -}; - -/* raw access to a floppy drive, read and write an arbitrary segment. - * For ftape/zftape to support formatting etc. - */ -#define MT_FT_RD_SINGLE 0 -#define MT_FT_RD_AHEAD 1 -#define MT_FT_WR_ASYNC 0 /* start tape only when all buffers are full */ -#define MT_FT_WR_MULTI 1 /* start tape, continue until buffers are empty */ -#define MT_FT_WR_SINGLE 2 /* write a single segment and stop afterwards */ -#define MT_FT_WR_DELETE 3 /* write deleted data marks, one segment at time */ - -struct mtftseg -{ - unsigned mt_segno; /* the segment to read or write */ - unsigned mt_mode; /* modes for read/write (sync/async etc.) */ - int mt_result; /* result of r/w request, not of the ioctl */ - void __user *mt_data; /* User space buffer: must be 29kb */ -}; - -/* get tape capacity (ftape/zftape) - */ -struct mttapesize { - unsigned long mt_capacity; /* entire, uncompressed capacity - * of a cartridge - */ - unsigned long mt_used; /* what has been used so far, raw - * uncompressed amount - */ -}; - -/* possible values of the ftfmt_op field - */ -#define FTFMT_SET_PARMS 1 /* set software parms */ -#define FTFMT_GET_PARMS 2 /* get software parms */ -#define FTFMT_FORMAT_TRACK 3 /* start formatting a tape track */ -#define FTFMT_STATUS 4 /* monitor formatting a tape track */ -#define FTFMT_VERIFY 5 /* verify the given segment */ - -struct ftfmtparms { - unsigned char ft_qicstd; /* QIC-40/QIC-80/QIC-3010/QIC-3020 */ - unsigned char ft_fmtcode; /* Refer to the QIC specs */ - unsigned char ft_fhm; /* floppy head max */ - unsigned char ft_ftm; /* floppy track max */ - unsigned short ft_spt; /* segments per track */ - unsigned short ft_tpc; /* tracks per cartridge */ -}; - -struct ftfmttrack { - unsigned int ft_track; /* track to format */ - unsigned char ft_gap3; /* size of gap3, for FORMAT_TRK */ -}; - -struct ftfmtstatus { - unsigned int ft_segment; /* segment currently being formatted */ -}; - -struct ftfmtverify { - unsigned int ft_segment; /* segment to verify */ - unsigned long ft_bsm; /* bsm as result of VERIFY cmd */ -}; - -struct mtftformat { - unsigned int fmt_op; /* operation to perform */ - union fmt_arg { - struct ftfmtparms fmt_parms; /* format parameters */ - struct ftfmttrack fmt_track; /* ctrl while formatting */ - struct ftfmtstatus fmt_status; - struct ftfmtverify fmt_verify; /* for verifying */ - } fmt_arg; -}; - -struct mtftcmd { - unsigned int ft_wait_before; /* timeout to wait for drive to get ready - * before command is sent. Milliseconds - */ - qic117_cmd_t ft_cmd; /* command to send */ - unsigned char ft_parm_cnt; /* zero: no parm is sent. */ - unsigned char ft_parms[3]; /* parameter(s) to send to - * the drive. The parms are nibbles - * driver sends cmd + 2 step pulses */ - unsigned int ft_result_bits; /* if non zero, number of bits - * returned by the tape drive - */ - unsigned int ft_result; /* the result returned by the tape drive*/ - unsigned int ft_wait_after; /* timeout to wait for drive to get ready - * after command is sent. 0: don't wait */ - int ft_status; /* status returned by ready wait - * undefined if timeout was 0. - */ - int ft_error; /* error code if error status was set by - * command - */ -}; - /* mag tape io control commands */ #define MTIOCTOP _IOW('m', 1, struct mtop) /* do a mag tape op */ #define MTIOCGET _IOR('m', 2, struct mtget) /* get tape status */ #define MTIOCPOS _IOR('m', 3, struct mtpos) /* get tape position */ -/* The next two are used by the QIC-02 driver for runtime reconfiguration. - * See tpqic02.h for struct mtconfiginfo. - */ -#define MTIOCGETCONFIG _IOR('m', 4, struct mtconfiginfo) /* get tape config */ -#define MTIOCSETCONFIG _IOW('m', 5, struct mtconfiginfo) /* set tape config */ - -/* the next six are used by the floppy ftape drivers and its frontends - * sorry, but MTIOCTOP commands are write only. - */ -#define MTIOCRDFTSEG _IOWR('m', 6, struct mtftseg) /* read a segment */ -#define MTIOCWRFTSEG _IOWR('m', 7, struct mtftseg) /* write a segment */ -#define MTIOCVOLINFO _IOR('m', 8, struct mtvolinfo) /* info about volume */ -#define MTIOCGETSIZE _IOR('m', 9, struct mttapesize)/* get cartridge size*/ -#define MTIOCFTFORMAT _IOWR('m', 10, struct mtftformat) /* format ftape */ -#define MTIOCFTCMD _IOWR('m', 11, struct mtftcmd) /* send QIC-117 cmd */ /* Generic Mag Tape (device independent) status macros for examining * mt_gstat -- HP-UX compatible. diff --git a/include/linux/qic117.h b/include/linux/qic117.h deleted file mode 100644 index 07b537e5d3..0000000000 --- a/include/linux/qic117.h +++ /dev/null @@ -1,290 +0,0 @@ -#ifndef _QIC117_H -#define _QIC117_H - -/* - * Copyright (C) 1993-1996 Bas Laarhoven, - * (C) 1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/include/linux/qic117.h,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:19:32 $ - * - * This file contains QIC-117 spec. related definitions for the - * QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux. - * - * These data were taken from the Quarter-Inch Cartridge - * Drive Standards, Inc. document titled: - * `Common Command Set Interface Specification for Flexible - * Disk Controller Based Minicartridge Tape Drives' - * document QIC-117 Revision J, 28 Aug 96. - * For more information, contact: - * Quarter-Inch Cartridge Drive Standards, Inc. - * 311 East Carrillo Street - * Santa Barbara, California 93101 - * Telephone (805) 963-3853 - * Fax (805) 962-1541 - * WWW http://www.qic.org - * - * Current QIC standard revisions (of interest) are: - * QIC-40-MC, Rev. M, 2 Sep 92. - * QIC-80-MC, Rev. N, 20 Mar 96. - * QIC-80-MC, Rev. K, 15 Dec 94. - * QIC-113, Rev. G, 15 Jun 95. - * QIC-117, Rev. J, 28 Aug 96. - * QIC-122, Rev. B, 6 Mar 91. - * QIC-130, Rev. C, 2 Sep 92. - * QIC-3010-MC, Rev. F, 14 Jun 95. - * QIC-3020-MC, Rev. G, 31 Aug 95. - * QIC-CRF3, Rev. B, 15 Jun 95. - * */ - -/* - * QIC-117 common command set rev. J. - * These commands are sent to the tape unit - * as number of pulses over the step line. - */ - -typedef enum { - QIC_NO_COMMAND = 0, - QIC_RESET = 1, - QIC_REPORT_NEXT_BIT = 2, - QIC_PAUSE = 3, - QIC_MICRO_STEP_PAUSE = 4, - QIC_ALTERNATE_TIMEOUT = 5, - QIC_REPORT_DRIVE_STATUS = 6, - QIC_REPORT_ERROR_CODE = 7, - QIC_REPORT_DRIVE_CONFIGURATION = 8, - QIC_REPORT_ROM_VERSION = 9, - QIC_LOGICAL_FORWARD = 10, - QIC_PHYSICAL_REVERSE = 11, - QIC_PHYSICAL_FORWARD = 12, - QIC_SEEK_HEAD_TO_TRACK = 13, - QIC_SEEK_LOAD_POINT = 14, - QIC_ENTER_FORMAT_MODE = 15, - QIC_WRITE_REFERENCE_BURST = 16, - QIC_ENTER_VERIFY_MODE = 17, - QIC_STOP_TAPE = 18, -/* commands 19-20: reserved */ - QIC_MICRO_STEP_HEAD_UP = 21, - QIC_MICRO_STEP_HEAD_DOWN = 22, - QIC_SOFT_SELECT = 23, - QIC_SOFT_DESELECT = 24, - QIC_SKIP_REVERSE = 25, - QIC_SKIP_FORWARD = 26, - QIC_SELECT_RATE = 27, -/* command 27, in ccs2: Select Rate or Format */ - QIC_ENTER_DIAGNOSTIC_1 = 28, - QIC_ENTER_DIAGNOSTIC_2 = 29, - QIC_ENTER_PRIMARY_MODE = 30, -/* command 31: vendor unique */ - QIC_REPORT_VENDOR_ID = 32, - QIC_REPORT_TAPE_STATUS = 33, - QIC_SKIP_EXTENDED_REVERSE = 34, - QIC_SKIP_EXTENDED_FORWARD = 35, - QIC_CALIBRATE_TAPE_LENGTH = 36, - QIC_REPORT_FORMAT_SEGMENTS = 37, - QIC_SET_FORMAT_SEGMENTS = 38, -/* commands 39-45: reserved */ - QIC_PHANTOM_SELECT = 46, - QIC_PHANTOM_DESELECT = 47 -} qic117_cmd_t; - -typedef enum { - discretional = 0, required, ccs1, ccs2 -} qic_compatibility; - -typedef enum { - unused, mode, motion, report -} command_types; - -struct qic117_command_table { - char *name; - __u8 mask; - __u8 state; - __u8 cmd_type; - __u8 non_intr; - __u8 level; -}; - -#define QIC117_COMMANDS {\ -/* command mask state cmd_type */\ -/* | name | | | non_intr */\ -/* | | | | | | level */\ -/* 0*/ {NULL, 0x00, 0x00, mode, 0, discretional},\ -/* 1*/ {"soft reset", 0x00, 0x00, motion, 1, required},\ -/* 2*/ {"report next bit", 0x00, 0x00, report, 0, required},\ -/* 3*/ {"pause", 0x36, 0x24, motion, 1, required},\ -/* 4*/ {"micro step pause", 0x36, 0x24, motion, 1, required},\ -/* 5*/ {"alternate command timeout", 0x00, 0x00, mode, 0, required},\ -/* 6*/ {"report drive status", 0x00, 0x00, report, 0, required},\ -/* 7*/ {"report error code", 0x01, 0x01, report, 0, required},\ -/* 8*/ {"report drive configuration",0x00, 0x00, report, 0, required},\ -/* 9*/ {"report rom version", 0x00, 0x00, report, 0, required},\ -/*10*/ {"logical forward", 0x37, 0x25, motion, 0, required},\ -/*11*/ {"physical reverse", 0x17, 0x05, motion, 0, required},\ -/*12*/ {"physical forward", 0x17, 0x05, motion, 0, required},\ -/*13*/ {"seek head to track", 0x37, 0x25, motion, 0, required},\ -/*14*/ {"seek load point", 0x17, 0x05, motion, 1, required},\ -/*15*/ {"enter format mode", 0x1f, 0x05, mode, 0, required},\ -/*16*/ {"write reference burst", 0x1f, 0x05, motion, 1, required},\ -/*17*/ {"enter verify mode", 0x37, 0x25, mode, 0, required},\ -/*18*/ {"stop tape", 0x00, 0x00, motion, 1, required},\ -/*19*/ {"reserved (19)", 0x00, 0x00, unused, 0, discretional},\ -/*20*/ {"reserved (20)", 0x00, 0x00, unused, 0, discretional},\ -/*21*/ {"micro step head up", 0x02, 0x00, motion, 0, required},\ -/*22*/ {"micro step head down", 0x02, 0x00, motion, 0, required},\ -/*23*/ {"soft select", 0x00, 0x00, mode, 0, discretional},\ -/*24*/ {"soft deselect", 0x00, 0x00, mode, 0, discretional},\ -/*25*/ {"skip segments reverse", 0x36, 0x24, motion, 1, required},\ -/*26*/ {"skip segments forward", 0x36, 0x24, motion, 1, required},\ -/*27*/ {"select rate or format", 0x03, 0x01, mode, 0, required /* [ccs2] */},\ -/*28*/ {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional},\ -/*29*/ {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional},\ -/*30*/ {"enter primary mode", 0x00, 0x00, mode, 0, required},\ -/*31*/ {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional},\ -/*32*/ {"report vendor id", 0x00, 0x00, report, 0, required},\ -/*33*/ {"report tape status", 0x04, 0x04, report, 0, ccs1},\ -/*34*/ {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1},\ -/*35*/ {"skip extended forward", 0x36, 0x24, motion, 1, ccs1},\ -/*36*/ {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2},\ -/*37*/ {"report format segments", 0x17, 0x05, report, 0, ccs2},\ -/*38*/ {"set format segments", 0x17, 0x05, mode, 0, ccs2},\ -/*39*/ {"reserved (39)", 0x00, 0x00, unused, 0, discretional},\ -/*40*/ {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional},\ -/*41*/ {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional},\ -/*42*/ {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional},\ -/*43*/ {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional},\ -/*44*/ {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional},\ -/*45*/ {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional},\ -/*46*/ {"phantom select", 0x00, 0x00, mode, 0, discretional},\ -/*47*/ {"phantom deselect", 0x00, 0x00, mode, 0, discretional},\ -} - -/* - * Status bits returned by QIC_REPORT_DRIVE_STATUS - */ - -#define QIC_STATUS_READY 0x01 /* Drive is ready or idle. */ -#define QIC_STATUS_ERROR 0x02 /* Error detected, must read - error code to clear this */ -#define QIC_STATUS_CARTRIDGE_PRESENT 0x04 /* Tape is present */ -#define QIC_STATUS_WRITE_PROTECT 0x08 /* Tape is write protected */ -#define QIC_STATUS_NEW_CARTRIDGE 0x10 /* New cartridge inserted, must - read error status to clear. */ -#define QIC_STATUS_REFERENCED 0x20 /* Cartridge appears to have been - formatted. */ -#define QIC_STATUS_AT_BOT 0x40 /* Cartridge is at physical - beginning of tape. */ -#define QIC_STATUS_AT_EOT 0x80 /* Cartridge is at physical end - of tape. */ -/* - * Status bits returned by QIC_REPORT_DRIVE_CONFIGURATION - */ - -#define QIC_CONFIG_RATE_MASK 0x18 -#define QIC_CONFIG_RATE_SHIFT 3 -#define QIC_CONFIG_RATE_250 0 -#define QIC_CONFIG_RATE_500 2 -#define QIC_CONFIG_RATE_1000 3 -#define QIC_CONFIG_RATE_2000 1 -#define QIC_CONFIG_RATE_4000 0 /* since QIC-117 Rev. J */ - -#define QIC_CONFIG_LONG 0x40 /* Extra Length Tape Detected */ -#define QIC_CONFIG_80 0x80 /* QIC-80 detected. */ - -/* - * Status bits returned by QIC_REPORT_TAPE_STATUS - */ - -#define QIC_TAPE_STD_MASK 0x0f -#define QIC_TAPE_QIC40 0x01 -#define QIC_TAPE_QIC80 0x02 -#define QIC_TAPE_QIC3020 0x03 -#define QIC_TAPE_QIC3010 0x04 - -#define QIC_TAPE_LEN_MASK 0x70 -#define QIC_TAPE_205FT 0x10 -#define QIC_TAPE_307FT 0x20 -#define QIC_TAPE_VARIABLE 0x30 -#define QIC_TAPE_1100FT 0x40 -#define QIC_TAPE_FLEX 0x60 - -#define QIC_TAPE_WIDE 0x80 - -/* Define a value (in feet) slightly higher than - * the possible maximum tape length. - */ -#define QIC_TOP_TAPE_LEN 1500 - -/* - * Errors: List of error codes, and their severity. - */ - -typedef struct { - char *message; /* Text describing the error. */ - unsigned int fatal:1; /* Non-zero if the error is fatal. */ -} ftape_error; - -#define QIC117_ERRORS {\ - /* 0*/ { "No error", 0, },\ - /* 1*/ { "Command Received while Drive Not Ready", 0, },\ - /* 2*/ { "Cartridge Not Present or Removed", 1, },\ - /* 3*/ { "Motor Speed Error (not within 1%)", 1, },\ - /* 4*/ { "Motor Speed Fault (jammed, or gross speed error", 1, },\ - /* 5*/ { "Cartridge Write Protected", 1, },\ - /* 6*/ { "Undefined or Reserved Command Code", 1, },\ - /* 7*/ { "Illegal Track Address Specified for Seek", 1, },\ - /* 8*/ { "Illegal Command in Report Subcontext", 0, },\ - /* 9*/ { "Illegal Entry into a Diagnostic Mode", 1, },\ - /*10*/ { "Broken Tape Detected (based on hole sensor)", 1, },\ - /*11*/ { "Warning--Read Gain Setting Error", 1, },\ - /*12*/ { "Command Received While Error Status Pending (obs)", 1, },\ - /*13*/ { "Command Received While New Cartridge Pending", 1, },\ - /*14*/ { "Command Illegal or Undefined in Primary Mode", 1, },\ - /*15*/ { "Command Illegal or Undefined in Format Mode", 1, },\ - /*16*/ { "Command Illegal or Undefined in Verify Mode", 1, },\ - /*17*/ { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, },\ - /*18*/ { "Logical EOT Before All Segments generated", 1, },\ - /*19*/ { "Command Illegal When Cartridge Not Referenced", 1, },\ - /*20*/ { "Self-Diagnostic Failed (cannot be cleared)", 1, },\ - /*21*/ { "Warning EEPROM Not Initialized, Defaults Set", 1, },\ - /*22*/ { "EEPROM Corrupted or Hardware Failure", 1, },\ - /*23*/ { "Motion Time-out Error", 1, },\ - /*24*/ { "Data Segment Too Long -- Logical Forward or Pause", 1, },\ - /*25*/ { "Transmit Overrun (obs)", 1, },\ - /*26*/ { "Power On Reset Occurred", 0, },\ - /*27*/ { "Software Reset Occurred", 0, },\ - /*28*/ { "Diagnostic Mode 1 Error", 1, },\ - /*29*/ { "Diagnostic Mode 2 Error", 1, },\ - /*30*/ { "Command Received During Non-Interruptible Process", 1, },\ - /*31*/ { "Rate or Format Selection Error", 1, },\ - /*32*/ { "Illegal Command While in High Speed Mode", 1, },\ - /*33*/ { "Illegal Seek Segment Value", 1, },\ - /*34*/ { "Invalid Media", 1, },\ - /*35*/ { "Head Positioning Failure", 1, },\ - /*36*/ { "Write Reference Burst Failure", 1, },\ - /*37*/ { "Prom Code Missing", 1, },\ - /*38*/ { "Invalid Format", 1, },\ - /*39*/ { "EOT/BOT System Failure", 1, },\ - /*40*/ { "Prom A Checksum Error", 1, },\ - /*41*/ { "Drive Wakeup Reset Occurred", 1, },\ - /*42*/ { "Prom B Checksum Error", 1, },\ - /*43*/ { "Illegal Entry into Format Mode", 1, },\ -} - -#endif /* _QIC117_H */ -- cgit v1.2.2 From de14569f94513279e3d44d9571a421e9da1759ae Mon Sep 17 00:00:00 2001 From: Vladimir Saveliev Date: Mon, 22 Jan 2007 20:40:46 -0800 Subject: [PATCH] resierfs: avoid tail packing if an inode was ever mmapped This patch fixes a confusion reiserfs has for a long time. On release file operation reiserfs used to try to pack file data stored in last incomplete page of some files into metadata blocks. After packing the page got cleared with clear_page_dirty. It did not take into account that the page may be mmaped into other process's address space. Recent replacement for clear_page_dirty cancel_dirty_page found the confusion with sanity check that page has to be not mapped. The patch fixes the confusion by making reiserfs avoid tail packing if an inode was ever mmapped. reiserfs_mmap and reiserfs_file_release are serialized with mutex in reiserfs specific inode. reiserfs_mmap locks the mutex and sets a bit in reiserfs specific inode flags. reiserfs_file_release checks the bit having the mutex locked. If bit is set - tail packing is avoided. This eliminates a possibility that mmapped page gets cancel_page_dirty-ed. Signed-off-by: Vladimir Saveliev Cc: Jeff Mahoney Cc: Chris Mason Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/reiserfs_fs_i.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/linux/reiserfs_fs_i.h b/include/linux/reiserfs_fs_i.h index 5b3b297aa2..ce3663fb01 100644 --- a/include/linux/reiserfs_fs_i.h +++ b/include/linux/reiserfs_fs_i.h @@ -25,6 +25,7 @@ typedef enum { i_link_saved_truncate_mask = 0x0020, i_has_xattr_dir = 0x0040, i_data_log = 0x0080, + i_ever_mapped = 0x0100 } reiserfs_inode_flags; struct reiserfs_inode_info { @@ -52,6 +53,7 @@ struct reiserfs_inode_info { ** flushed */ unsigned long i_trans_id; struct reiserfs_journal_list *i_jl; + struct mutex i_mmap; #ifdef CONFIG_REISERFS_FS_POSIX_ACL struct posix_acl *i_acl_access; struct posix_acl *i_acl_default; -- cgit v1.2.2 From ac8be955049dab828a68b9c68a75144832f8289f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 20 Jan 2007 00:18:01 +0000 Subject: [MIPS] SMTC: Instant IPI replay. SMTC pseudo-interrupts between TCs are deferred and queued if the target TC is interrupt-inhibited (IXMT). In the first SMTC prototypes, these queued IPIs were serviced on return to user mode, or on entry into the kernel idle loop. The INSTANT_REPLAY option dispatches them as part of local_irq_restore() processing, which adds runtime overhead (hence the option to turn it off), but ensures that IPIs are handled promptly even under heavy I/O interrupt load. Signed-off-by: Ralf Baechle --- include/asm-mips/irqflags.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'include') diff --git a/include/asm-mips/irqflags.h b/include/asm-mips/irqflags.h index 46bf5de5ac..af3b07dfad 100644 --- a/include/asm-mips/irqflags.h +++ b/include/asm-mips/irqflags.h @@ -15,6 +15,27 @@ #include +/* + * CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY does prompt replay of deferred IPIs, + * at the cost of branch and call overhead on each local_irq_restore() + */ + +#ifdef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY + +extern void smtc_ipi_replay(void); + +#define irq_restore_epilog(flags) \ +do { \ + if (!(flags & 0x0400)) \ + smtc_ipi_replay(); \ +} while (0) + +#else + +#define irq_restore_epilog(ignore) do { } while (0) + +#endif /* CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY */ + __asm__ ( " .macro raw_local_irq_enable \n" " .set push \n" @@ -193,6 +214,7 @@ do { \ : "=r" (__tmp1) \ : "0" (flags) \ : "memory"); \ + irq_restore_epilog(flags); \ } while(0) static inline int raw_irqs_disabled_flags(unsigned long flags) -- cgit v1.2.2 From 73f66ace34e3d935d1ad01208234f8871ac1f500 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 23 Jan 2007 12:27:04 +0000 Subject: [PATCH] fix prototype of csum_ipv6_magic() (ia64) Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- include/asm-ia64/checksum.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/asm-ia64/checksum.h b/include/asm-ia64/checksum.h index 2b78582cbd..97af155057 100644 --- a/include/asm-ia64/checksum.h +++ b/include/asm-ia64/checksum.h @@ -72,8 +72,8 @@ static inline __sum16 csum_fold(__wsum csum) #define _HAVE_ARCH_IPV6_CSUM 1 struct in6_addr; -extern unsigned short int csum_ipv6_magic(struct in6_addr *saddr, - struct in6_addr *daddr, __u32 len, unsigned short proto, - unsigned int csum); +extern __sum16 csum_ipv6_magic(const struct in6_addr *saddr, + const struct in6_addr *daddr, __u32 len, unsigned short proto, + __wsum csum); #endif /* _ASM_IA64_CHECKSUM_H */ -- cgit v1.2.2