aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media/video
Commit message (Collapse)AuthorAge
...
* V4L/DVB (5977): cx8800: Add register debug functions to radio device tooTrent Piepho2007-10-09
| | | | | | | | Add the advanced debug functions to the radio videodev template. One could already use them from the video and vbi devices. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5975): cx88: Wrong values used for HD-3000 radio modeTrent Piepho2007-10-09
| | | | | | | | | | | | | | | | | | | After some tedious work with a logic probe and a magnifying glass, I've determined that GPIO 7 is used to switch between the DTT7612's Sound 4.5 MHz IF output on pin 12 and the FM 10.7MHz If output on pin 11. GPIO 2 is used to switch the card's analog sound output from from the analog input connector to the CX23883's audio DACs. So, in radio mode GPIO2 = 1 and GPIO7 = 0. Add some comments about how the HD-3000's GPIOs are connected. Delete the vmux setting for the radio, as vmux doesn't apply to radio mode. Also delete the lines setting unused gpio words to zero; it's not necessary as 0 is the default value for uninitialized fields. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5973): ivtv: attach yuv field order to each frameIan Armstrong2007-10-09
| | | | | | | | | | | | | | | | | In the current driver, the field order is global. As soon as it's changed it takes immediate effect. This is a problem when the video changes order mid stream. Although it mostly works okay, the video may judder / flicker. This patch attaches the field order to the frame, so that any buffered frames will not be displayed until the correct field. In the event that the field order is changed mid stream, the driver will ensure that the previous frame is displayed for a minimum of 3 fields. These are the two original fields the frame should have occupied, plus the one extra since the new frame still has to wait for the correct field. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5972): ivtv: prevent yuv register updates from being missedIan Armstrong2007-10-09
| | | | | | | | | | | | | | | | | | | The yuv output code always compares the new frame position & size with those of the previous frame. If they are different, a flag is set to request the yuv output registers be updated when the new frame is displayed. If the incoming frames are delivered too fast, exhausting the buffers, the most recent frame already buffered will be discarded. Unfortunately, any update request will also be discarded. If the new frame matches the size & position of the now discarded frame, the yuv registers are not flagged for update & will remain in their old state. This patch preserves the register update flag in the event that a frame is dropped. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5971): ivtv-fb: framebuffer timings no longer locked on module loadIan Armstrong2007-10-09
| | | | | | | | | | | | Framebuffer timings are currently locked to the video format in use when the module is loaded. If the video format is then changed, the timings returned by the framebuffer will be for the original format. This patch ensures that the timings returned reflect the current video format. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5970): ivtv: prevent vertical overflow of yuv outputIan Armstrong2007-10-09
| | | | | | | | | | | | | | | When the video standard is changed, there's no guarantee the framebuffer dimensions are still legal. The yuv output code uses these dimensions to calculate the size & position for the video overlay. If the framebuffer dimensions are now illegal, the output may exceed the vertical limit of the display, causing distortion. This patch adds an additional check to ensure the output doesn't exceed the limits for the current video standard, cropping if required. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5953): msp3400-driver.c: kmalloc + memset conversion to kzallocMariusz Kozlowski2007-10-09
| | | | | Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5940): Export v4l2_int_device_{, un}registerAdrian Bunk2007-10-09
| | | | | | | | | | | | | | | This patch fixes the following build error: <-- snip --> ... MODPOST 2135 modules make[2]: *** [__modpost] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5929): Add vp27smpx driverHans Verkuil2007-10-09
| | | | | | | | | | | This device is internal to the Panasonic VP27S tuner and is used to set the mono/stereo/bilingual setting of the tuner. It is used by two Japanese cx23416-based cards. Signed-off-by: Takahiro Adachi <tadachi@tadachi-net.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5928): tuner: fix TOP values for the Panasonic VP27 tuner.Hans Verkuil2007-10-09
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5927): ivtv: set correct crystal frequency of the GVMVPRX cardsHans Verkuil2007-10-09
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5924): ivtv-fb: initializing the fb should trigger ivtv firmware loadHans Verkuil2007-10-09
| | | | | | | ivtv-fb: initializing the framebuffer should trigger ivtv firmware load Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5922): ivtv, cx25840: postpone fw load until first useHans Verkuil2007-10-09
| | | | | | | | The firmware is now loaded when the driver is actually used for the first time. This allows the driver to be compiled in-kernel instead of as a module. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5921): ivtv: add missing composite input line for ivtv_pci_pg600v2Hans Verkuil2007-10-09
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5919): ivtv: remove dead codeHans Verkuil2007-10-09
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5912): Clean up duplicate includes in drivers/media/Jesper Juhl2007-10-09
| | | | | | | | This patch cleans up duplicate includes in drivers/media/ Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5910): ivtv-fb: improve debug messageHans Verkuil2007-10-09
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5909): ivtv: update version to 1.1 to mark ivtv-fb supportHans Verkuil2007-10-09
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5908): ivtv-fb: cleanups, prevent fw calls in some casesIan Armstrong2007-10-09
| | | | | | Signed-off-by: Ian Armstrong <ian@iarmst.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5906): ivtv-fb: replace HZ with msecs_to_jiffiesHans Verkuil2007-10-09
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5905): ivtv-fb: Use proper ioctl valueHans Verkuil2007-10-09
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5904): ivtv-fb: cleanupsHans Verkuil2007-10-09
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5902): Add ivtv-fb framebuffer driver.Hans Verkuil2007-10-09
| | | | | | | | | | | | | | Add the ivtv-fb framebuffer driver for cx23415 devices (currently only the Hauppauge PVR-350 cards). This makes it possible to use the On-Screen Display functionality of these cards, either for menus during MPEG playback, or as a console or X display. Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com> Signed-off-by: Chris Kennedy <c@groovy.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: John P Harvey <john.p.harvey@btinternet.com> Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5885): zr36067: Fix problems with module parametersTrent Piepho2007-10-09
| | | | | | | | | | | | | | | | | | | | | Add permissions to all the module parameters so they can be queried and set (when possible) via sysfs. Add description for the vidmem parameter. Change the video_nr parameter to an array, so that the video number can be specified when a user has more than one card. The driver would try to give all cards the same number otherwise, which will fail for all cards after the first. The default_input option would only allow values of 0 or 1, contrary to the description. Allow values up to the number of inputs defined for the card. Add description of lock_norm's different behavior for 1 and >1. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5884): zr36067: clean up debug functionJean Delvare2007-10-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Debugging cleanups to the zr36067 driver: * Use module_param_named() to declare the debug parameter, so we can use a single global variable to handle the debug level. This makes the driver a bit smaller (by 648 bytes on x86_64), thanks to one less level of indirection on every use. * Change the debug parameter sysfs permissions, so that the debug level can be adjusted at runtime, as is done in many other media/video drivers. * The debug level is between 0 and 5, not 0 and 4. * Move the zr_debug export and dprintk macro definition to a header file so that we don't have to define them in each source file. * Simplify a duplicate test on zr_debug. Note that zr_debug was subsequently renamed to debug_zr36067 to avoid possible conflicts with other Zoran device drivers, on a suggestion by Trent Piepho. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5883): V4L: Fix a compile warning on non-32-bit machines.Sakari Ailus2007-10-09
| | | | | | | | | Fix a compile warning on non-32-bit machines in v4l2-int-device.h. Add internal ioctl interface fallback function for ioctls with one argument. Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5881): ivtv: init channel for NTSC_M_JP standard.Hans Verkuil2007-10-09
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5863): TCM825x: Add driver.Sakari Ailus2007-10-09
| | | | | | | | | | Add a driver for Toshiba TCM825x VGA camera sensor. This sensor is used e.g. in Nokia N800 internet tablet. This driver uses the new V4L2 internal ioctl interface. Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5862): V4L: Add internal ioctl-like interface.Sakari Ailus2007-10-09
| | | | | | | | | | | | | | This patch adds an internal ioctl-like interface which can be used in situations where a single Video4Linux device is implemented by multiple device drivers. One master device controls one or more slave devices. The slaves provide Video4Linux ioctl-like interface for the use of the master. Only a handful of ioctls are implemented at the moment. More can (and should) be added as more functionality is required. Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (6052): ivtv: fix udma yuv bugIan Armstrong2007-09-30
| | | | | | | | | | Using udma yuv causes the driver becomes locked into that mode. This prevents use of the mpeg decoder & non-udma yuv output. This patch clears the operating mode when the device is closed. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* usbvision-video: buggered method tablesAl Viro2007-09-26
| | | | | | | | | duplicated .mmap in one, .vidioc_s_audio misspelled as .vidioc_g_audio in other Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pci: fix unterminated pci_device_id listsKees Cook2007-09-19
| | | | | | | | | | | | | | | | | Fix a couple drivers that do not correctly terminate their pci_device_id lists. This results in garbage being spewed into modules.pcimap when the module happens to not have 28 NULL bytes following the table, and/or the last PCI ID is actually truncated from the table when calculating the modules.alias PCI aliases, cause those unfortunate device IDs to not auto-load. Signed-off-by: Kees Cook <kees@ubuntu.com> Acked-by: Corey Minyard <minyard@acm.org> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Jeff Garzik <jeff@garzik.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* V4L/DVB (6188): Avoid a NULL pointer dereference during mpeg_open()Steven Toth2007-09-14
| | | | | | | | | Bug: With a hardware encoder board installed as cx88[1] and a non-encoder boards installed as cx88[0], an OOPS is generated during cx8802_get_device() called from mpeg_open(). Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (6148): Fix a warning at saa7191_probeMauro Carvalho Chehab2007-09-14
| | | | | | | | saa7191.c: In function 'saa7191_probe': saa7191.c:596: warning: passing argument 3 of 'saa7191_write_block' discards qualifiers from pointer target type Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (6147): Pwc: Fix a broken debug messageJean Delvare2007-09-14
| | | | | | | | | | | | | Commit 85237f202d46d55c1bffe0c5b1aa3ddc0f1dce4d introduced the following warning (with CONFIG_USB_PWC_DEBUG=y): drivers/media/video/pwc/pwc-if.c: In function "pwc_video_close": drivers/media/video/pwc/pwc-if.c:1211: warning: "i" may be used uninitialized in this function This is true, and can cause a broken debug message to be logged. Here's a fix. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (6144): Fix mux setup for composite sound on AverTV 307Stas Sergeev2007-09-14
| | | | | | | | | | | | | | | | | | Right now the composite sound input doesn't work on AverTV 307 because of the wrong mux setup. The composite sound is routed via an external 4channel multiplexer controlled by GPIO, while the code assumes an internal multiplexer instead. Presumably this was a copy/paste error, and noone have ever tested the functionality. With the attached patch it works properly, which gives me an ability to finally watch the cable TV under linux. Signed-off-by: Stas Sergeev <stsp@aknet.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (6095): ivtv: fix VIDIOC_G_ENC_INDEX flag handlingHans Verkuil2007-09-14
| | | | | | | | | | | | | Due to a documentation bug (the type mask is 3 bits long, not 2) the wrong frame types were filled in: the B and P frame types were swapped. This bug also hid a second bug: when a capture is stopped a last entry is written into the pgm index buffer with internal type 0, denoting the end of the program. This entry wasn't ignored, instead it was accidentally returned to the caller as a P frame. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* USB: fix DoS in pwc USB video driverOliver Neukum2007-08-22
| | | | | | | | | | | | | | the pwc driver has a disconnect method that waits for user space to close the device. This opens up an opportunity for a DoS attack, blocking the USB subsystem and making khubd's task busy wait in kernel space. This patch shifts freeing resources to close if an opened device is disconnected. Signed-off-by: Oliver Neukum <oneukum@suse.de> CC: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Fix a memory leak in em28xx_usb_probe()Jesper Juhl2007-08-22
| | | | | | | | | | | | | | | | | If, in em28xx_usb_probe() the memory allocation dev->alt_max_pkt_size = kmalloc(32* dev->num_alt,GFP_KERNEL); fails, then we'll bail out and return -ENOMEM. The problem is that in that case we don't free the storage allocated to 'dev', thus causing a memory leak. This patch fixes the leak by freeing 'dev' before we return -ENOMEM. This fixes Coverity bug #647. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* V4L/DVB (6028): Turn an unnecessary mdelay() into msleep().Marcelo Tosatti2007-08-20
| | | | | Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (6027): Get rid of an ill-behaved msleep in i2c writeJonathan Corbet2007-08-20
| | | | | | | | | | | | | Configuring the OLPC camera requires something over 150 register writes. Unfortunately, querying the CAFE i2c controller too soon after a write causes the hardware to flake. The problem had been "solved" with an msleep() call, but, between the number of registers and how msleep() behaves, that resulted in a 3-second delay on camera initialization. Instead, we hand-code a wait for the completion interrupt which avoids reading the status registers. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (6026): Avoid powering up the camera on resumeChris Ball2007-08-20
| | | | | | Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5969): ivtv: report ivtv version in status logHans Verkuil2007-08-20
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5967): ivtv: fix VIDIOC_S_FBUF:new OSD values where never setHans Verkuil2007-08-20
| | | | | | | | | | ivtv: fix VIDIOC_S_FBUF support: new OSD values where never actually set. The values set with VIDIOC_S_FBUF were not actually used until the next VIDIOC_S_FMT. Fixed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5920): ivtv: fix incorrect fw size report.Hans Verkuil2007-07-30
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5918): ivtv: fix TV-out VBI handling, only reset on last close.Hans Verkuil2007-07-30
| | | | | | | | | | | | | | While decoding (MPEG or YUV) is active or when VBI output is in use, then do not clear the VBI output of the saa7127. Only after the last user is gone can we clear it. This fixes the case where playback was stopped, another channel was chosen and playback was restarted, while /dev/vbi16 was used to set the WSS (widescreen) setting. Without this fix the WSS was reset on every stop instead of just keeping the last value. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5917): ivtv: improve mailbox responsiveness.Hans Verkuil2007-07-30
| | | | | | | | | First try polling for the result of a mailbox command, then switch to a test/sleep loop. Also reduce the sleep time from 10 ms to 1 ms. Improves the responsiveness of the mailbox handling. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5916): ivtv: fix pause/continue/play handlingHans Verkuil2007-07-30
| | | | | | | | | Pausing a decoder followed by a Play command would do nothing. Fixed. Pausing a decoder running at non-standard speed following by a Continue would reset the speed to 100%. Fixed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5900): usbvision: fix bugs [sg]_register functionsTrent Piepho2007-07-30
| | | | | | | | | | | s_register was assigning the return code to (unsigned)reg->val, rather than errCode, which it what it would return. Except reg->val can't be < 0, so it would never actually return an error. g_register never actually put the value it read into reg->val. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5899): bttv: Fix Viewcast Osprey 440 supportTrent Piepho2007-07-30
| | | | | | | | | | | | | | | | | | | | | | | Various gpio and mux settings for the Osprey 440 weren't correct. Fix them and provide some documentation about how the gpios work. The osprey eeprom routine wasn't run for the 440, add it. It was also crap, re-written to be better. Add the Osprey 440 to the Bt878 ALSA driver's whitelist. Currently the sample rate is fixed at 32kHz, as the driver doesn't support different rates for digital input mode, though the card can select the rate from 32, 44.1, or 48 kHz via gpio. Setting the audio gain via ALSA isn't supported yet; a userspace tool that programs the X9221 via i2c-dev must be used. The Bt878 digital audio format isn't programmed correctly for the CS5331A ADC used, resulting in extremely garbled sound. That is fixed in a followup patch. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-04-05 23:46:36 -0400