aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAge
...
| * | | | | hwmon/f71805f: Fix the device address decodingJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The lowest 3 bits are ignored, and the chip decodes all 8 addresses, not only the 2 it needs. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | | | | hwmon/f71805f: Always create all fan inputsJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fans can be hotplugged, so we should create sysfs file even for fans which are disabled at driver load time. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | | | | hwmon/f71805f: Add support for the Fintek F71872F/FG chipJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the Fintek F71872F/FG Super-I/O chip. It is basically the same as the Fintek F71805F/FG as far as hardware monitoring is concerned, with two additional internal voltages monitored (VSB and battery), and 6 VID inputs (not yet supported.) To make things a bit more confusing, two of the voltage input pins (in4 and in8) can be used for other functions. The driver reads the pin configuration from the Super-I/O configuration space to decide whether it must create interface files for these inputs or not. Many thanks to Nikolay Derkach for testing the early iterations of this code and reporting bugs. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | | | | hwmon: New PC87427 hardware monitoring driverJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a new hardware monitoring driver for the National Semiconductor PC87427 Super-I/O chip. It only supports fan speed monitoring for now, while the chip can do much more. Thanks to Amir Habibi at Candelis for setting up a test system, and to Michael Kress for testing several iterations of this driver. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | | | | hwmon/it87: Remove the SMBus interface supportJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This interface was useless as the LPC ISA-like interface is always available, is faster, and is more reliable. This cuts the driver size by some 20%. This change is also required to later convert the it87 driver to a platform driver, so that we can get rid of i2c-isa in a near future. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | | | | hwmon/hdaps: Update the list of supported devicesStephan Berberig2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the strange DMI for the R52 (1846AQG) and add a note to update to latest BIOS in the Kconfig and source code. Signed-off-by: Stephan Berberig <s.berberig@arcor.de> Signed-off-by: Robert Love <rlove@rlove.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | | | | hwmon/hdaps: Move the DMI detection data to .dataJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the DMI detection data from .text to .data. We really don't want that amount of data on the stack. Also refactor the macros used to generate the detection data, the vendor becomes a parameter. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Robert Love <rlove@rlove.org>
| * | | | | hwmon/pc87360: Autodetect the VRM versionJim Cromie2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pc87360 currently hardcodes vrm = 90 (2.4 vintage). Update it to use newer code in hwmon-vid which reads cpuid to determine the correct vid. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | | | | hwmon/f71805f: Document the fan control featuresJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Document the different fan control methods, list their options, and give some hints for best results. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | | | | hwmon/f71805f: Add support for "speed mode" fan speed controlJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In "speed mode", the user specifies a target fan speed (in RPM) and the chip automatically adjusts the PWM duty cycle (or DC output level) to reach this target. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | | | | hwmon/f71805f: Support DC fan speed control modeJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In DC mode, the pwmN_freq files are not created. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | | | | hwmon/f71805f: Let the user adjust the PWM base frequencyJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Different frequencies can give better results depending on the exact fan model used. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | | | | hwmon/f71805f: Add manual fan speed controlJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pwmN files are writable only in manual fan speed control mode. In automatic fan speed control modes, they are read-only and report the duty cycle chosen by the chip. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | | | | hwmon/f71805f: Store the fan control registersJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So far we were only extracting the fan skip bit from the fan control registers, but we'll soon need more bits so better store the whole register values. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | | | | | [PATCH] getting rid of all casts of k[cmz]alloc() callsRobert P. J. Day2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] sstfb: add sysfs interfaceHelge Deller2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modify the sstfb (Voodoo1/2) driver: - fix a memleak when removing the sstfb module - fix sstfb to use the fbdev default videomode database - add module option "mode_option" to set initial screen mode - add sysfs-interface to turn VGA-passthrough on/off via /sys/class/graphics/fbX/vgapass - remove old debug functions from ioctl interface Signed-off-by: Helge Deller <deller@gmx.de> Acked-By: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] fbdev: remove references to non-existent fbmon_valid_timings()Geert Uytterhoeven2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove references to non-existent fbmon_valid_timings() Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] HPT37x: read f_CNT saved by BIOS from portSergei Shtylyov2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The undocumented register BIOS uses for saving f_CNT seems to only be mapped to I/O space while all the other HPT3xx regs are dual-mapped. Looks like another HighPoint's dirty trick. With this patch, the deadly kernel oops on the cards having the modern HighPoint BIOSes is now at last gone! Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] ide: HPT3xx: fix PCI clock detectionSergei Shtylyov2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the f_CNT value saved by the HighPoint BIOS if available as reading it directly would give us a wrong PCI frequency after DPLL has already been calibrated by BIOS. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] ide: fix the case of multiple HPT3xx chips presentSergei Shtylyov2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | init_chipset_hpt366() modifies some fields of the ide_pci_device_t structure depending on the chip's revision, so pass it a copy of the structure to avoid issues when multiple different chips are present. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] ide: fix HPT3xx hotswap supportSergei Shtylyov2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the broken hotswap code: on HPT37x it caused RESET- to glitch when tristating the bus (the MISC control 3/6 and soft control 2 need to be written to in the certain order), and for HPT36x the obsolete HDIO_TRISTATE_HWIF ioctl() handler was called instead which treated the state argument wrong. Also, get rid of the soft control reg. 1 wtite to enable IDE interrupt -- this is done in init_hpt37x() already... Have been tested on HPT370 and 371N. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] ide: optimize HPT37x timing tablesSergei Shtylyov2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Save some space on the timing tables by introducing the separate transfer mode table in which the mode lookup is done to get the index into the timing table itself. Get rid of the rest of the obsolete/duplicate tables and use one set of tables for the whole HPT37x chip family like the HighPoint open-source drivers do. Documnent the different timing register layout for the HPT36x chip family (this is my guesswork based on the timing values). Have been tested and works fine on HPT370/302/371N. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] ide: fix HPT37x timing tablesSergei Shtylyov2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix/remove bad/unused timing tables: HPT370/A 66 MHz tables weren't really needed (the chips are not UltraATA/133 capable and shouldn't support 66 MHz PCI) and had many modes over- and underclocked, HPT372 33 MHz table was in fact for 66 MHz and 50 MHz table missed UltraDMA mode 6, HPT374 33 MHz table was really for 50 MHz... (Actually, HPT370/A 33 MHz tables also have issues. e.g. HPT370 has PIO modes 0/1 overlocked.) There's also no need in the separate HPT374 tables because HPT372 timings should be the same (and those tables has UltraDMA mode 6 which HPT374 supports depending on HPT374_ALLOW_ATA133_6 #define)... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] ide: HPT3xxN clocking fixesSergei Shtylyov2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix serious problems with the HPT372N clock turnaround code: - the wrong ports were written to when called for the secondary channel; - it didn't serialize access to the channels; - turnaround shou;dn't be done on 66 MHz PCI; - caching the clock mode per-channel caused it to get out of sync with the actual register value. Additionally, avoid calibrating PLL twice (for each channel) as the second try results in a wrong PCI frequency and thus in the wrong timings. Make the driver deal with HPT302N and HPT371N correctly -- the clocking and (seemingly) a need for clock tunaround is the same as for HPT372N. HPT371/N chips have only one, secondary channel, so avoid touching their "pure virtual" primary channel, and disable it if the BIOS haven't done this already. Also, while at it, disable UltraATA/133 for HPT372 by default -- 50 MHz DPLL clock don't allow for this speed anyway. And remove the traces of the former bad patch that wasn't even applicable to this version of driver. Has been tested on HPT370/371N, unfortunately I don't have an instant access to the other chips... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] Optimize calc_load()Eric Dumazet2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | calc_load() is called by timer interrupt to update avenrun[]. It currently calls nr_active() at each timer tick (HZ per second), while the update of avenrun[] is done only once every 5 seconds. (LOAD_FREQ=5 Hz) nr_active() is quite expensive on SMP machines, since it has to sum up nr_running and nr_uninterruptible of all online CPUS, bringing foreign dirty cache lines. This patch is an optimization of calc_load() so that nr_active() is called only if we need it. The use of unlikely() is welcome since the condition is true only once every 5*HZ time. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] knfsd: Fix up some bit-rot in exp_exportNeilBrown2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The nfsservctl system call isn't used but recent nfs-utils releases for exporting filesystems, and consequently the code that is uses - exp_export - has suffered some bitrot. Particular: - some newly added fields in 'struct svc_export' are being initialised properly. - the return value is now always -ENOMEM ... This patch fixes both these problems. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] knfsd: Don't ignore kstrdup failure in rpc cachesNeilBrown2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] knfsd: nfsd4: simplify filehandle checkJ.Bruce Fields2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Kill another big "if" clause. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] knfsd: nfsd4: simplify migration op checkJ.Bruce Fields2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I'm not too fond of these big if conditions. Replace them by checks of a flag in the operation descriptor. To my eye this makes the code a bit more self-documenting, and makes the complicated part of the code (proc_compound) a little more compact. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] knfsd: nfsd4: reorganize compound opsJ.Bruce Fields2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define an op descriptor struct, use it to simplify nfsd4_proc_compound(). Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] knfsd: nfsd4: make verify and nverify wrappersJ.Bruce Fields2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make wrappers for verify and nverify, for consistency with other ops. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] knfsd: nfsd4: don't inline nfsd4 compound op functionsJ.Bruce Fields2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The inlining contributes to bloating the stack of nfsd4_compound, and I want to change the compound op functions to function pointers anyway. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] knfsd: nfsd4: move replay_owner to cstateJ.Bruce Fields2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tuck away the replay_owner in the cstate while we're at it. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] knfsd: nfsd4: remove spurious replay_owner checkJ.Bruce Fields2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OK, this is embarassing--I've even looked back at the history, and cannot for the life of me figure out why I added this check. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] knfsd: nfsd4: pass saved and current fh together into nfsd4 operationsJ.Bruce Fields2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pass the saved and current filehandles together into all the nfsd4 compound operations. I want a unified interface to these operations so we can just call them by pointer and throw out the huge switch statement. Also I'll eventually want a structure like this--that holds the state used during compound processing--for deferral. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] knfsd: svcrpc: remove another silent drop from deferral codeJ.Bruce Fields2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's no point deferring something just to immediately fail the deferral, especially now that we can do something more useful in the failure case by returning an error. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] knfsd: nfsd: don't drop silently on upcall deferralJ.Bruce Fields2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To avoid tying up server threads when nfsd makes an upcall (to mountd, to get export options, to idmapd, for nfsv4 name<->id mapping, etc.), we temporarily "drop" the request and save enough information so that we can revisit it later. Certain failures during the deferral process can cause us to really drop the request and never revisit it. This is often less than ideal, and is unacceptable in the NFSv4 case--rfc 3530 forbids the server from dropping a request without also closing the connection. As a first step, we modify the deferral code to return -ETIMEDOUT (which is translated to nfserr_jukebox in the v3 and v4 cases, and remains a drop in the v2 case). Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] knfsd: nfsd4: handling more nfsd_cross_mnt errors in nfsd4 readdirJ.Bruce Fields2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch on its own causes no change in behavior, since nfsd_cross_mnt() only returns -EAGAIN; but in the future I'd like it to also be able to return -ETIMEDOUT, so we may as well handle any possible error here. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] knfsd: nfsd: simplify exp_pseudorootJ.Bruce Fields2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Note there's no need for special handling of -EAGAIN here; nfserrno() does what we want already. So this is a pure cleanup with no change in functionality. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] knfsd: nfsd: make exp_rootfh handle exp_parent errorsJ.Bruce Fields2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since exp_parent can fail by returning an error (-EAGAIN) in addition to by returning NULL, we should check for that case in exp_rootfh. (TODO: we should check that userland handles these errors too.) Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] knfsd: nfsd4: clarify units of COMPOUND_SLACK_SPACEJ.Bruce Fields2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A comment here incorrectly states that "slack_space" is measured in words, not bytes. Remove the comment, and adjust a variable name and a few comments to clarify the situation. This is pure cleanup; there should be no change in functionality. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] knfsd: svcrpc: fix gss krb5i memory leakJ.Bruce Fields2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The memory leak here is embarassingly obvious. This fixes a problem that causes the kernel to leak a small amount of memory every time it receives a integrity-protected request. Thanks to Aim Le Rouzic for the bug report. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] knfsd: nfsd4: remove a dprink from nfsd4_lockJ.Bruce Fields2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This dprintk is printing the wrong error now, but it's probably an unnecessary dprintk anyway; just remove it. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] remove the broken BLK_DEV_SWIM_IOP driverAdrian Bunk2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BLK_DEV_SWIM_IOP driver has: - already been marked as BROKEN in 2.6.0 three years ago and - is still marked as BROKEN. Drivers that had been marked as BROKEN for such a long time seem to be unlikely to be revived in the forseeable future. But if anyone wants to ever revive this driver, the code is still present in the older kernel releases. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Jens Axboe <jens.axboe@oracle.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] one more EXPORT_UNUSED_SYMBOL removalAdrian Bunk2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] update Tigran's email addressesTigran Aivazian2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As Adrian pointed out recently, there were still a couple of places where I should have fixed my email address. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] ncpfs: ensure we free wdog_pid on parse_option or fill_inode failureEric W. Biederman2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This took a little refactoring but now errors are handled cleanly. When this code used pid_t values this wasn't necessary because you can't leak a pid_t. Thanks to Peter Vandrovec for spotting this. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Peter Vandrovec <vandrove@vc.cvut.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] ncpfs: Use struct pid to track the userspace watchdog processEric W. Biederman2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch converts the tracking of the user space watchdog process from using a pid_t to use struct pid. This makes us safe from pid wrap around issues and prepares the way for the pid namespace. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Petr Vandrovec <VANDROVE@vc.cvut.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] smbfs: Make conn_pid a struct pidEric W. Biederman2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | smbfs keeps track of the user space server process in conn_pid. This converts that track to use a struct pid instead of pid_t. This keeps us safe from pid wrap around issues and prepares the way for the pid namespace. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] n_r3964: Use struct pid to track user space clientsEric W. Biederman2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently this driver tracks user space clients it should send signals to. In the presenct of file descriptor passing this is appears susceptible to confusion from pid wrap around issues. Replacing this with a struct pid prevents us from getting confused, and prepares for a pid namespace implementation. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-08-31 16:12:02 -0400