litmus2008.git/include/asm-generic, branch PORT_BASE

Fix Maple PATA IRQ assignment.

2007-01-26T22:27:40+00:00

On the Maple board, the AMD8111 IDE is in legacy mode... except that it
appears on IRQ 20 instead of IRQ 15. For drivers/ide this was handled by
the architecture's "pci_get_legacy_ide_irq()" function, but in libata we
just hard-code the numbers 14 and 15.

This patch provides asm-powerpc/libata-portmap.h which maps the IRQ as
appropriate, having added a pci_dev argument to the
ATA_{PRIM,SECOND}ARY_IRQ macros.

There's probably a better way to do this -- especially if we observe
that the _only_ case in which this seemingly-generic
"pci_get_legacy_ide_irq()" function returns anything other than 14 and
15 for primary and secondary respectively is the case of the AMD8111 on
the Maple board -- couldn't we handle that with a special case in the
pata_amd driver, or perhaps with a PCI quirk for Maple to switch it into
native mode during early boot and assign resources properly?

Signed-off-by: David Woodhouse 
Signed-off-by: Jeff Garzik

[PATCH] change WARN_ON back to "BUG: at ..."

2006-12-30T18:55:54+00:00

WARN_ON() ever triggering is a kernel bug.  Do not try to paper over this
fact by suggesting to the user that this is 'only' a warning, as the
following recent commit does:

  commit 30e25b71e725b150585e17888b130e3324f8cf7c
  Author: Jeremy Fitzhardinge 
  Date:   Fri Dec 8 02:36:24 2006 -0800

    [PATCH] Fix generic WARN_ON message

    A warning is a warning, not a BUG.

( it might make sense to rename BUG() to CRASH() and BUG_ON() to
  CRASH_ON(), but that does not change the fact that WARN_ON()
  signals a kernel bug. )

i and others objected to this change during lkml review:

  http://marc.theaimsgroup.com/?l=linux-kernel&m=116115160710533&w=2

still the change slipped upstream - grumble :)

Also, use the standard "BUG: " format to make it easier to grep logs and
to make it easier to google for kernel bugs.

Signed-off-by: Ingo Molnar 
Cc: Jeremy Fitzhardinge 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

PCI: Fix multiple problems with VIA hardware

2006-12-20T18:54:43+00:00

This patch is designed to fix:
- Disk eating corruptor on KT7 after resume from RAM
- VIA IRQ handling
- VIA fixups for bus lockups after resume from RAM

The core of this is to add a table of resume fixups run at resume time.
We need to do this for a variety of boards and features, but particularly
we need to do this to get various critical VIA fixups done on resume.

The second part of the problem is to handle VIA IRQ number rules which
are a bit odd and need special handling for PIC interrupts. Various
patches broke various boxes and while this one may not be perfect
(hopefully it is) it ensures the workaround is applied to the right
devices only.

From: Jean Delvare 

Now that PCI quirks are replayed on software resume, we can safely
re-enable the Asus SMBus unhiding quirk even when software suspend support
is enabled.

[akpm@osdl.org: fix const warning]
Signed-off-by: Alan Cox 
Cc: Jean Delvare 
Signed-off-by: Andrew Morton 
Signed-off-by: Greg Kroah-Hartman

Remove stack unwinder for now

2006-12-15T16:47:51+00:00

It has caused more problems than it ever really solved, and is
apparently not getting cleaned up and fixed.  We can put it back when
it's stable and isn't likely to make warning or bug events worse.

In the meantime, enable frame pointers for more readable stack traces.

Signed-off-by: Linus Torvalds

Make sure we populate the initroot filesystem late enough

2006-12-11T20:12:04+00:00

We should not initialize rootfs before all the core initializers have
run.  So do it as a separate stage just before starting the regular
driver initializers.

Signed-off-by: Linus Torvalds

[PATCH] tty: switch to ktermios

2006-12-08T16:28:57+00:00

This is the grungy swap all the occurrences in the right places patch that
goes with the updates.  At this point we have the same functionality as
before (except that sgttyb() returns speeds not zero) and are ready to
begin turning new stuff on providing nobody reports lots of bugs

If you are a tty driver author converting an out of tree driver the only
impact should be termios->ktermios name changes for the speed/property
setting functions from your upper layers.

If you are implementing your own TCGETS function before then your driver
was broken already and its about to get a whole lot more painful for you so
please fix it 8)

Also fill in c_ispeed/ospeed on init for most devices, although the current
code will do this for you anyway but I'd like eventually to lose that extra
paranoia

[akpm@osdl.org: bluetooth fix]
[mp3@de.ibm.com: sclp fix]
[mp3@de.ibm.com: warning fix for tty3270]
[hugh@veritas.com: fix tty_ioctl powerpc build]
[jdike@addtoit.com: uml: fix ->set_termios declaration]
Signed-off-by: Alan Cox 
Signed-off-by: Martin Peschke 
Acked-by: Peter Oberparleiter 
Cc: Cornelia Huck 
Signed-off-by: Hugh Dickins 
Signed-off-by: Jeff Dike 
Cc: Paolo 'Blaisorblade' Giarrusso 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] LOG2: Alter get_order() so that it can make use of ilog2() on a constant

2006-12-08T16:28:51+00:00

Alter get_order() so that it can make use of ilog2() on a constant to produce
a constant value, retaining the ability for an arch to override it in the
non-const case.

Signed-off-by: David Howells 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] Fix generic WARN_ON message

2006-12-08T16:28:39+00:00

A warning is a warning, not a BUG.

Signed-off-by: Jeremy Fitzhardinge 
Cc: Ingo Molnar 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] Generic BUG implementation

2006-12-08T16:28:39+00:00

This patch adds common handling for kernel BUGs, for use by architectures as
they wish.  The code is derived from arch/powerpc.

The advantages of having common BUG handling are:
 - consistent BUG reporting across architectures
 - shared implementation of out-of-line file/line data
 - implement CONFIG_DEBUG_BUGVERBOSE consistently

This means that in inline impact of BUG is just the illegal instruction
itself, which is an improvement for i386 and x86-64.

A BUG is represented in the instruction stream as an illegal instruction,
which has file/line information associated with it.  This extra information is
stored in the __bug_table section in the ELF file.

When the kernel gets an illegal instruction, it first confirms it might
possibly be from a BUG (ie, in kernel mode, the right illegal instruction).
It then calls report_bug().  This searches __bug_table for a matching
instruction pointer, and if found, prints the corresponding file/line
information.  If report_bug() determines that it wasn't a BUG which caused the
trap, it returns BUG_TRAP_TYPE_NONE.

Some architectures (powerpc) implement WARN using the same mechanism; if the
illegal instruction was the result of a WARN, then report_bug(Q) returns
CONFIG_DEBUG_BUGVERBOSE; otherwise it returns BUG_TRAP_TYPE_BUG.

lib/bug.c keeps a list of loaded modules which can be searched for __bug_table
entries.  The architecture must call
module_bug_finalize()/module_bug_cleanup() from its corresponding
module_finalize/cleanup functions.

Unsetting CONFIG_DEBUG_BUGVERBOSE will reduce the kernel size by some amount.
At the very least, filename and line information will not be recorded for each
but, but architectures may decide to store no extra information per BUG at
all.

Unfortunately, gcc doesn't have a general way to mark an asm() as noreturn, so
architectures will generally have to include an infinite loop (or similar) in
the BUG code, so that gcc knows execution won't continue beyond that point.
gcc does have a __builtin_trap() operator which may be useful to achieve the
same effect, unfortunately it cannot be used to actually implement the BUG
itself, because there's no way to get the instruction's address for use in
generating the __bug_table entry.

[randy.dunlap@oracle.com: Handle BUG=n, GENERIC_BUG=n to prevent build errors]
[bunk@stusta.de: include/linux/bug.h must always #include 
Cc: Andi Kleen 
Cc: Hugh Dickens 
Cc: Michael Ellerman 
Cc: Paul Mackerras 
Cc: Benjamin Herrenschmidt 
Cc: Rusty Russell 
Signed-off-by: Adrian Bunk 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6

2006-12-07T16:59:11+00:00

* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (156 commits)
  [PATCH] x86-64: Export smp_call_function_single
  [PATCH] i386: Clean up smp_tune_scheduling()
  [PATCH] unwinder: move .eh_frame to RODATA
  [PATCH] unwinder: fully support linker generated .eh_frame_hdr section
  [PATCH] x86-64: don't use set_irq_regs()
  [PATCH] x86-64: check vector in setup_ioapic_dest to verify if need setup_IO_APIC_irq
  [PATCH] x86-64: Make ix86 default to HIGHMEM4G instead of NOHIGHMEM
  [PATCH] i386: replace kmalloc+memset with kzalloc
  [PATCH] x86-64: remove remaining pc98 code
  [PATCH] x86-64: remove unused variable
  [PATCH] x86-64: Fix constraints in atomic_add_return()
  [PATCH] x86-64: fix asm constraints in i386 atomic_add_return
  [PATCH] x86-64: Correct documentation for bzImage protocol v2.05
  [PATCH] x86-64: replace kmalloc+memset with kzalloc in MTRR code
  [PATCH] x86-64: Fix numaq build error
  [PATCH] x86-64: include/asm-x86_64/cpufeature.h isn't a userspace header
  [PATCH] unwinder: Add debugging output to the Dwarf2 unwinder
  [PATCH] x86-64: Clarify error message in GART code
  [PATCH] x86-64: Fix interrupt race in idle callback (3rd try)
  [PATCH] x86-64: Remove unwind stack pointer alignment forcing again
  ...

Fixed conflict in include/linux/uaccess.h manually

Signed-off-by: Linus Torvalds