litmus2008.git/drivers/bluetooth, branch master

[BLUETOOTH]: Always send explicit hci_ll wake-up acks.

2008-01-11T06:24:43+00:00

In the (rare) event of simultaneous mutual wake up requests,
do send the chip an explicit wake-up ack. This is required
for Texas Instruments's BRF6350 chip.

Signed-off-by: Ohad Ben-Cohen 
Signed-off-by: David S. Miller

[Bluetooth] Add generic driver for Bluetooth USB devices

2007-10-22T09:59:46+00:00

This patch adds a new generic driver for Bluetooth USB devices. This
driver is still experimental at this point, but it is cleaner and
easier to maintain than the current Bluetooth USB driver. It is a
much better starting point for power management improvements.

Signed-off-by: Marcel Holtmann

[Bluetooth] Add generic driver for Bluetooth SDIO devices

2007-10-22T09:59:45+00:00

This patch adds a generic driver for Bluetooth SDIO devices. It
supports Type-A and Type-B devices.

Signed-off-by: David Vrabel 
Signed-off-by: Marcel Holtmann

[Bluetooth] Eliminate checks for impossible conditions in IRQ handler

2007-10-22T09:59:44+00:00

Our info structure and info->hdev is always passed to the IRQ handler,
so we don't have to worry about these checks in every interrupt.

Leave a BUG_ON() just to help unwary programmers, but these could
probably be removed as well.

Signed-off-by: Jeff Garzik 
Signed-off-by: Marcel Holtmann

[Bluetooth] Add UART driver for Texas Instruments' BRF63xx chips

2007-10-22T09:59:44+00:00

Add support for Texas Instruments' HCI Low Level (HCILL) Bluetooth
protocol, which is a power management extension to H4. The HCILL is
widely used by TI's BRF63xx Bluetooth chips.

Signed-off-by: Ohad Ben-Cohen 
Signed-off-by: Marcel Holtmann

[Bluetooth] Change BPA 100/105 driver to use USB anchors

2007-10-22T09:59:43+00:00

With the new support for USB anchors the driver can become more
simpler and also cleaner. This patch switches to the usage of USB
anchors for all URBs.

Signed-off-by: Marcel Holtmann

[Bluetooth] Switch from OGF+OCF to using only opcodes

2007-10-22T09:59:40+00:00

The Bluetooth HCI commands are divided into logical OGF groups for
easier identification of their purposes. While this still makes sense
for the written specification, its makes the code only more complex
and harder to read. So instead of using separate OGF and OCF values
to identify the commands, use a common 16-bit opcode that combines
both values. As a side effect this also reduces the complexity of
OGF and OCF calculations during command header parsing.

Signed-off-by: Marcel Holtmann

[Bluetooth] Add missing stat.byte_rx counter modification

2007-09-09T06:39:27+00:00

With the support for hci_recv_fragment() the call to increase the
stat.byte_rx counter got accidentally removed. This patch fixes it.

Signed-off-by: Marcel Holtmann

[Bluetooth] Remove the redundant non-seekable llseek method

2007-07-11T04:53:45+00:00

Remove the llseek method given that the open method already calls
nonseekable_open().

Signed-off-by: Robert P. J. Day 
Signed-off-by: Marcel Holtmann

[Bluetooth] Use hci_recv_fragment() within HCI USB driver

2007-07-11T04:42:35+00:00

This patch modifies the HCI USB driver to use the new helper function
for reassembling HCI data packets and events.

Signed-off-by: Marcel Holtmann