HiSax is a Linux hardware-level driver for passive ISDN cards with Siemens chipset (ISAC_S 2085/2086/2186, HSCX SAB 82525). It is based on the Teles driver from Jan den Ouden. It is meant to be used with isdn4linux, an ISDN link-level module for Linux written by Fritz Elfert. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. Supported cards --------------- Teles 8.0/16.0/16.3 and compatible ones Teles 16.3c Teles S0/PCMCIA Teles PCI Teles S0Box Creatix S0Box Creatix PnP S0 Compaq ISDN S0 ISA card AVM A1 (Fritz, Teledat 150) AVM Fritz PCMCIA AVM Fritz PnP AVM Fritz PCI ELSA Microlink PCC-16, PCF, PCF-Pro, PCC-8 ELSA Quickstep 1000 ELSA Quickstep 1000PCI ELSA Quickstep 3000 (same settings as QS1000) ELSA Quickstep 3000PCI ELSA PCMCIA ITK ix1-micro Rev.2 Eicon Diva 2.0 ISA and PCI (S0 and U interface, no PRO version) Eicon Diva 2.01 ISA and PCI Eicon Diva 2.02 PCI Eicon Diva Piccola ASUSCOM NETWORK INC. ISDNLink 128K PC adapter (order code I-IN100-ST-D) Dynalink IS64PH (OEM version of ASUSCOM NETWORK INC. ISDNLink 128K adapter) PCBIT-DP (OEM version of ASUSCOM NETWORK INC. ISDNLink) HFC-2BS0 based cards (TeleInt SA1) Sedlbauer Speed Card (Speed Win, Teledat 100, PCI, Fax+) Sedlbauer Speed Star/Speed Star2 (PCMCIA) Sedlbauer ISDN-Controller PC/104 USR Sportster internal TA (compatible Stollmann tina-pp V3) USR internal TA PCI ith Kommunikationstechnik GmbH MIC 16 ISA card Traverse Technologie NETjet PCI S0 card and NETspider U card Ovislink ISDN sc100-p card (NETjet driver) Dr. Neuhaus Niccy PnP/PCI Siemens I-Surf 1.0 Siemens I-Surf 2.0 (with IPAC, try type 12 asuscom) ACER P10 HST Saphir Berkom Telekom A4T Scitel Quadro Gazel ISDN cards HFC-PCI based cards Winbond W6692 based cards HFC-S+, HFC-SP/PCMCIA cards formula-n enternow Gerdes Power ISDN Note: PCF, PCF-Pro: up to now, only the ISDN part is supported PCC-8: not tested yet Eicon.Diehl Diva U interface not tested If you know other passive cards with the Siemens chipset, please let me know. You can combine any card, if there is no conflict between the resources (io, mem, irq). Configuring the driver ---------------------- The HiSax driver can either be built directly into the kernel or as a module. It can be configured using the command line feature while loading the kernel with LILO or LOADLIN or, if built as a module, using insmod/modprobe with parameters. There is also some config needed before you compile the kernel and/or modules. It is included in the normal "make [menu]config" target at the kernel. Don't forget it, especially to select the right D-channel protocol. Please note: In older versions of the HiSax driver, all PnP cards needed to be configured with isapnp and worked only with the HiSax driver used as a module. In the current version, HiSax will automatically use the in-kernel ISAPnP support, provided you selected it during kernel configuration (CONFIG_ISAPNP), if you don't give the io=, irq= command line parameters. The affected card types are: 4,7,12,14,19,27-30 a) when built as a module ------------------------- insmod/modprobe hisax.o \ io=iobase irq=IRQ mem=membase type=card_type \ protocol=D_channel_protocol id=idstring or, if several cards are installed: insmod/modprobe hisax.o \ io=iobase1,iobase2,... irq=IRQ1,IRQ2,... mem=membase1,membase2,... \ type=card_type1,card_type2,... \ protocol=D_channel_protocol1,D_channel_protocol2,... \ id=idstring1%idstring2 ... where "iobaseN" represents the I/O base address of the Nth card, "membaseN" the memory base address of the Nth card, etc. The reason for the delimiter "%" being used in the idstrings is that "," won't work with the current modules package. The parameters may be specified in any order. For example, the "io" parameter may precede the "irq" parameter, or vice versa. If several cards are installed, the ordering within the comma separated parameter lists must of course be consistent. Only parameters applicable to the card type need to be specified. For example, the Teles 16.3 card is not memory-mapped, so the "mem" parameter may be omitted for this card. Sometimes it may be necessary to specify a dummy parameter, however. This is the case when there is a card of a different type later in the list that needs a parameter which the preceding card does not. For instance, if a Teles 16.0 card is listed after a Teles 16.3 card, a dummy memory base parameter of 0 must be specified for the 16.3. Instead of a dummy value, the parameter can also be skipped by simply omitting the value. For example: mem=,0xd0000. See example 6 below. The parameter for the D-Channel protocol may be omitted if you selected the correct one during kernel config. Valid values are "1" for German 1TR6, "2" for EDSS1 (Euro ISDN), "3" for leased lines (no D-Channel) and "4" for US NI1. With US NI1 you have to include your SPID into the MSN setting in the form : for example (your phonenumber is 1234 your SPID 5678): AT&E1234:5678 on ttyI interfaces isdnctrl eaz ippp0 1234:5678 on network devices The Creatix/Teles PnP cards use io1= and io2= instead of io= for specifying the I/O addresses of the ISAC and HSCX chips, respectively. Card types: Type Required parameters (in addition to type and protocol) 1 Teles 16.0 irq, mem, io 2 Teles 8.0 irq, mem 3 Teles 16.3 (non PnP) irq, io 4 Creatix/Teles PnP irq, io0 (ISAC), io1 (HSCX) 5 AVM A1 (Fritz) irq, io 6 ELSA PCC/PCF cards io or nothing for autodetect (the iobase is required only if you have more than one ELSA card in your PC) 7 ELSA Quickstep 1000 irq, io (from isapnp setup) 8 Teles 16.3 PCMCIA irq, io 9 ITK ix1-micro Rev.2 irq, io 10 ELSA PCMCIA irq, io (set with card manager) 11 Eicon.Diehl Diva ISA PnP irq, io 11 Eicon.Diehl Diva PCI no parameter 12 ASUS COM ISDNLink irq, io (from isapnp setup) 13 HFC-2BS0 based cards irq, io 14 Teles 16.3c PnP irq, io 15 Sedlbauer Speed Card irq, io 15 Sedlbauer PC/104 irq, io 15 Sedlbauer Speed PCI no parameter 16 USR Sportster internal irq, io 17 MIC card irq, io 18 ELSA Quickstep 1000PCI no parameter 19 Compaq ISDN S0 ISA card irq, io0, io1, io (from isapnp setup io=IO2) 20 NETjet PCI card no parameter 21 Teles PCI no parameter 22 Sedlbauer Speed Star (PCMCIA) irq, io (set with card manager) 24 Dr. Neuhaus Niccy PnP irq, io0, io1 (from isapnp setup) 24 Dr. Neuhaus Niccy PCI no parameter 25 Teles S0Box irq, io (of the used lpt port) 26 AVM A1 PCMCIA (Fritz!) irq, io (set with card manager) 27 AVM PnP (Fritz!PnP) irq, io (from isapnp setup) 27 AVM PCI (Fritz!PCI) no parameter 28 Sedlbauer Speed Fax+ irq, io (from isapnp setup) 29 Siemens I-Surf 1.0 irq, io, memory (from isapnp setup) 30 ACER P10 irq, io (from isapnp setup) 31 HST Saphir irq, io 32 Telekom A4T none 33 Scitel Quadro subcontroller (4*S0, subctrl 1...4) 34 Gazel ISDN cards (ISA) irq,io 34 Gazel ISDN cards (PCI) none 35 HFC 2BDS0 PCI none 36 W6692 based PCI cards none 37 HFC 2BDS0 S+, SP irq,io 38 NETspider U PCI card none 39 HFC 2BDS0 SP/PCMCIA irq,io (set with cardmgr) 40 hotplug interface 41 Formula-n enter:now PCI none At the moment IRQ sharing is only possible with PCI cards. Please make sure that your IRQ is free and enabled for ISA use. Examples for module loading 1. Teles 16.3, Euro ISDN, I/O base 280 hex, IRQ 10 modprobe hisax type=3 protocol=2 io=0x280 irq=10 2. Teles 16.0, 1TR6 ISDN, I/O base d80 hex, IRQ 5, Memory d0000 hex modprobe hisax protocol=1 type=1 io=0xd80 mem=0xd0000 irq=5 3. Fritzcard, Euro ISDN, I/O base 340 hex, IRQ 10 and ELSA PCF, Euro ISDN modprobe hisax type=5,6 protocol=2,2 io=0x340 irq=10 id=Fritz%Elsa 4. Any ELSA PCC/PCF card, Euro ISDN modprobe hisax type=6 protocol=2 5. Teles 16.3 PnP, Euro ISDN, with isapnp configured isapnp config: (INT 0 (IRQ 10 (MODE +E))) (IO 0 (BASE 0x0580)) (IO 1 (BASE 0x0180)) modprobe hisax type=4 protocol=2 irq=10 io0=0x580 io1=0x180 In the current version of HiSax, you can instead simply use modprobe hisax type=4 protocol=2 if you configured your kernel for ISAPnP. Don't run isapnp in this case! 6. Teles 16.3, Euro ISDN, I/O base 280 hex, IRQ 12 and Teles 16.0, 1TR6, IRQ 5, Memory d0000 hex modprobe hisax type=3,1 protocol=2,1 io=0x280 mem=0,0xd0000 Please note the dummy 0 memory address for the Teles 16.3, used as a placeholder as described above, in the last example. 7. Teles PCMCIA, Euro ISDN, I/O base 180 hex, IRQ 15 (default values) modprobe hisax type=8 protocol=2 io=0x180 irq=15 b) using LILO/LOADLIN, with the driver compiled directly into the kernel ------------------------------------------------------------------------ hisax=typ1,dp1,pa_1,pb_1,pc_1[,typ2,dp2,pa_2 ... \ typn,dpn,pa_n,pb_n,pc_n][,idstring1[,idstring2,...,idstringn]] where typ1 = type of 1st card (default depends on kernel settings) dp1 = D-Channel protocol of 1st card. 1=1TR6, 2=EDSS1, 3=leased pa_1 = 1st parameter (depending on the type of the card) pb_1 = 2nd parameter ( " " " " " " " ) pc_1 = 3rd parameter ( " " " " " " " ) typ2,dp2,pa_2,pb_2,pc_2 = Parameters of the second card (defaults: none) typn,dpn,pa_n,pb_n,pc_n = Parameters of the n'th card (up to 16 cards are supported) idstring = Driver ID for accessing the particular card with utility programs and for identification when using a line monitor (default: "HiSax") Note: the ID string must start with an alphabetical character! Card types: type 1 Teles 16.0 pa=irq pb=membase pc=iobase 2 Teles 8.0 pa=irq pb=membase 3 Teles 16.3 pa=irq pb=iobase 4 Creatix/Teles PNP ONLY WORKS AS A MODULE ! 5 AVM A1 (Fritz) pa=irq pb=iobase 6 ELSA PCC/PCF cards pa=iobase or nothing for autodetect 7 ELSA Quickstep 1000 ONLY WORKS AS A MODULE ! 8 Teles S0 PCMCIA pa=irq pb=iobase 9 ITK ix1-micro Rev.2 pa=irq pb=iobase 10 ELSA PCMCIA pa=irq, pb=io (set with card manager) 11 Eicon.Diehl Diva ISAPnP ONLY WORKS AS A MODULE ! 11 Eicon.Diehl Diva PCI no parameter 12 ASUS COM ISDNLink ONLY WORKS AS A MODULE ! 13 HFC-2BS0 based cards pa=irq pb=io/* * net/tipc/zone.h: Include file for TIPC zone management routines * * Copyright (c) 2000-2006, Ericsson AB * Copyright (c) 2005-2006, Wind River Systems * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the names of the copyright holders nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef _TIPC_ZONE_H #define _TIPC_ZONE_H #include "node_subscr.h" #include "net.h" /** * struct _zone - TIPC zone structure * @addr: network address of zone * @clusters: array of pointers to all clusters within zone * @links: number of (unicast) links to zone */ struct _zone { u32 addr; struct cluster *clusters[2]; /* currently limited to just 1 cluster */ u32 links; }; struct tipc_node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref); u32 tipc_zone_select_router(struct _zone *z_ptr, u32 addr, u32 ref); void tipc_zone_remove_as_router(struct _zone *z_ptr, u32 router); void tipc_zone_send_external_routes(struct _zone *z_ptr, u32 dest); struct _zone *tipc_zone_create(u32 addr); void tipc_zone_delete(struct _zone *z_ptr); void tipc_zone_attach_cluster(struct _zone *z_ptr, struct cluster *c_ptr); u32 tipc_zone_next_node(u32 addr); static inline struct _zone *tipc_zone_find(u32 addr) { return tipc_net.zones[tipc_zone(addr)]; } #endif
generated by cgit v1.2.2 (git 2.25.0) at 2025-10-08 22:30:04 -0400
alia Firma Medusa GmbH (www.medusa.de). Firma Quant-X Austria for sponsoring a DEC Alpha board+CPU Firma Cologne Chip Designs GmbH My girl friend and partner in life Ute for her patience with me. Enjoy, Karsten Keil keil@isdn4linux.de Appendix: Teles PCMCIA driver ----------------------------- See http://www.stud.uni-wuppertal.de/~ea0141/pcmcia.html for instructions. Appendix: Linux and ISDN-leased lines ------------------------------------- Original from Juergen Quade, new version KKe. Attention NEW VERSION, the old leased line syntax won't work !!! You can use HiSax to connect your Linux-Box via an ISDN leased line to e.g. the Internet: 1. Build a kernel which includes the HiSax driver either as a module or as part of the kernel. cd /usr/src/linux make menuconfig make clean; make zImage; make modules; make modules_install 2. Install the new kernel cp /usr/src/linux/arch/i386/boot/zImage /etc/kernel/linux.isdn vi /etc/lilo.conf lilo 3. in case the hisax driver is a "fixed" part of the kernel, configure the driver with lilo: vi /etc/lilo.conf lilo Your lilo.conf _might_ look like the following: # LILO configuration-file # global section # teles 16.0 on IRQ=5, MEM=0xd8000, PORT=0xd80 append="hisax=1,3,5,0xd8000,0xd80,HiSax" # teles 16.3 (non pnp) on IRQ=15, PORT=0xd80 # append="hisax=3,3,5,0xd8000,0xd80,HiSax" boot=/dev/sda compact # faster, but won't work on all systems. linear read-only prompt timeout=100 vga = normal # force sane state # Linux bootable partition config begins image = /etc/kernel/linux.isdn root = /dev/sda1 label = linux.isdn # image = /etc/kernel/linux-2.0.30 root = /dev/sda1 label = linux.secure In the line starting with "append" you have to adapt the parameters according to your card (see above in this file) 3. boot the new linux.isdn kernel 4. start the ISDN subsystem: a) load - if necessary - the modules (depends, whether you compiled the ISDN driver as module or not) According to the type of card you have to specify the necessary driver parameter (irq, io, mem, type, protocol). For the leased line the protocol is "3". See the table above for the parameters, which you have to specify depending on your card. b) configure i4l /sbin/isdnctrl addif isdn0 # EAZ 1 -- B1 channel 2 --B2 channel /sbin/isdnctrl eaz isdn0 1 /sbin/isdnctrl secure isdn0 on /sbin/isdnctrl huptimeout isdn0 0 /sbin/isdnctrl l2_prot isdn0 hdlc # Attention you must not set an outgoing number !!! This won't work !!! # The incoming number is LEASED0 for the first card, LEASED1 for the # second and so on. /sbin/isdnctrl addphone isdn0 in LEASED0 # Here is no need to bind the channel. c) in case the remote partner is a CISCO: /sbin/isdnctrl encap isdn0 cisco-h d) configure the interface /sbin/ifconfig isdn0 ${LOCAL_IP} pointopoint ${REMOTE_IP} e) set the routes /sbin/route add -host ${REMOTE_IP} isdn0 /sbin/route add default gw ${REMOTE_IP} f) switch the card into leased mode for each used B-channel /sbin/hisaxctrl HiSax 5 1 Remarks: a) Use state of the art isdn4k-utils Here an example script: #!/bin/sh # Start/Stop ISDN leased line connection I4L_AS_MODULE=yes I4L_REMOTE_IS_CISCO=no I4L_MODULE_PARAMS="type=16 io=0x268 irq=7 " I4L_DEBUG=no I4L_LEASED_128K=yes LOCAL_IP=192.168.1.1 REMOTE_IP=192.168.2.1 case "$1" in start) echo "Starting ISDN ..." if [ ${I4L_AS_MODULE} = "yes" ]; then echo "loading modules..." /sbin/modprobe hisax ${I4L_MODULE_PARAMS} fi # configure interface /sbin/isdnctrl addif isdn0 /sbin/isdnctrl secure isdn0 on if [ ${I4L_DEBUG} = "yes" ]; then /sbin/isdnctrl verbose 7 /sbin/hisaxctrl HiSax 1 0xffff /sbin/hisaxctrl HiSax 11 0xff cat /dev/isdnctrl >/tmp/lea.log & fi if [ ${I4L_REMOTE_IS_CISCO} = "yes" ]; then /sbin/isdnctrl encap isdn0 cisco-h fi /sbin/isdnctrl huptimeout isdn0 0 # B-CHANNEL 1 /sbin/isdnctrl eaz isdn0 1 /sbin/isdnctrl l2_prot isdn0 hdlc # 1. card /sbin/isdnctrl addphone isdn0 in LEASED0 if [ ${I4L_LEASED_128K} = "yes" ]; then /sbin/isdnctrl addslave isdn0 isdn0s /sbin/isdnctrl secure isdn0s on /sbin/isdnctrl huptimeout isdn0s 0 # B-CHANNEL 2 /sbin/isdnctrl eaz isdn0s 2 /sbin/isdnctrl l2_prot isdn0s hdlc # 1. card /sbin/isdnctrl addphone isdn0s in LEASED0 if [ ${I4L_REMOTE_IS_CISCO} = "yes" ]; then /sbin/isdnctrl encap isdn0s cisco-h fi fi /sbin/isdnctrl dialmode isdn0 manual # configure tcp/ip /sbin/ifconfig isdn0 ${LOCAL_IP} pointopoint ${REMOTE_IP} /sbin/route add -host ${REMOTE_IP} isdn0 /sbin/route add default gw ${REMOTE_IP} # switch to leased mode # B-CHANNEL 1 /sbin/hisaxctrl HiSax 5 1 if [ ${I4L_LEASED_128K} = "yes" ]; then # B-CHANNEL 2 sleep 10; /* Wait for master */ /sbin/hisaxctrl HiSax 5 2 fi ;; stop) /sbin/ifconfig isdn0 down /sbin/isdnctrl delif isdn0 if [ ${I4L_DEBUG} = "yes" ]; then killall cat fi if [ ${I4L_AS_MODULE} = "yes" ]; then /sbin/rmmod hisax /sbin/rmmod isdn /sbin/rmmod ppp /sbin/rmmod slhc fi ;; *) echo "Usage: $0 {start|stop}" exit 1 esac exit 0