path: root/drivers/net/chelsio/subr.c

/*****************************************************************************
 *                                                                           *
 * File: subr.c                                                              *
 * $Revision: 1.27 $                                                         *
 * $Date: 2005/06/22 01:08:36 $                                              *
 * Description:                                                              *
 *  Various subroutines (intr,pio,etc.) used by Chelsio 10G Ethernet driver. *
 *  part of the Chelsio 10Gb Ethernet Driver.                                *
 *                                                                           *
 * This program is free software; you can redistribute it and/or modify      *
 * it under the terms of the GNU General Public License, version 2, as       *
 * published by the Free Software Foundation.                                *
 *                                                                           *
 * You should have received a copy of the GNU General Public License along   *
 * with this program; if not, write to the Free Software Foundation, Inc.,   *
 * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.                 *
 *                                                                           *
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED    *
 * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF      *
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.                     *
 *                                                                           *
 * http://www.chelsio.com                                                    *
 *                                                                           *
 * Copyright (c) 2003 - 2005 Chelsio Communications, Inc.                    *
 * All rights reserved.                                                      *
 *                                                                           *
 * Maintainers: maintainers@chelsio.com                                      *
 *                                                                           *
 * Authors: Dimitrios Michailidis   <dm@chelsio.com>                         *
 *          Tina Yang               <tainay@chelsio.com>                     *
 *          Felix Marti             <felix@chelsio.com>                      *
 *          Scott Bardone           <sbardone@chelsio.com>                   *
 *          Kurt Ottaway            <kottaway@chelsio.com>                   *
 *          Frank DiMambro          <frank@chelsio.com>                      *
 *                                                                           *
 * History:                                                                  *
 *                                                                           *
 ****************************************************************************/

#include "common.h"
#include "elmer0.h"
#include "regs.h"
#include "gmac.h"
#include "cphy.h"
#include "sge.h"
#include "espi.h"

/**
 *	t1_wait_op_done - wait until an operation is completed
 *	@adapter: the adapter performing the operation
 *	@reg: the register to check for completion
 *	@mask: a single-bit field within @reg that indicates completion
 *	@polarity: the value of the field when the operation is completed
 *	@attempts: number of check iterations
 *      @delay: delay in usecs between iterations
 *
 *	Wait until an operation is completed by checking a bit in a register
 *	up to @attempts times.  Returns %0 if the operation completes and %1
 *	otherwise.
 */
static int t1_wait_op_done(adapter_t *adapter, int reg, u32 mask, int polarity,
		    int attempts, int delay)
{
	while (1) {
		u32 val = readl(adapter->regs + reg) & mask;

		if (!!val == polarity)
			return 0;
		if (--attempts == 0)
			return 1;
		if (delay)
			udelay(delay);
	}
}

#define TPI_ATTEMPTS 50

/*
 * Write a register over the TPI interface (unlocked and locked versions).
 */
static int __t1_tpi_write(adapter_t *adapter, u32 addr, u32 value)
{
	int tpi_busy;

	writel(addr, adapter->regs + A_TPI_ADDR);
	writel(value, adapter->regs + A_TPI_WR_DATA);
	writel(F_TPIWR, adapter->regs + A_TPI_CSR);

	tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1,
				   TPI_ATTEMPTS, 3);
	if (tpi_busy)
		CH_ALERT("%s: TPI write to 0x%x failed\n",
			 adapter->name, addr);
	return tpi_busy;
}

int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value)
{
	int ret;

	spin_lock(&(adapter)->tpi_lock);
	ret = __t1_tpi_write(adapter, addr, value);
	spin_unlock(&(adapter)->tpi_lock);
	return ret;
}

/*
 * Read a register over the TPI interface (unlocked and locked versions).
 */
static int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp)
{
	int tpi_busy;

	writel(addr, adapter->regs + A_TPI_ADDR);
	writel(0, adapter->regs + A_TPI_CSR);

	tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1,
				   TPI_ATTEMPTS, 3);
	if (tpi_busy)
		CH_ALERT("%s: TPI read from 0x%x failed\n",
			 adapter->name, addr);
	else
		*valp = readl(adapter->regs + A_TPI_RD_DATA);
	return tpi_busy;
}

int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp)
{
	int ret;

	spin_lock(&(adapter)->tpi_lock);
	ret = __t1_tpi_read(adapter, addr, valp);
	spin_unlock(&(adapter)->tpi_lock);
	return ret;
}

/*
 * Called when a port's link settings change to propagate the new values to the
 * associated PHY and MAC.  After performing the common tasks it invokes an
 * OS-specific handler.
 */
/* static */ void link_changed(adapter_t *adapter, int port_id)
{
	int link_ok, speed, duplex, fc;
	struct cphy *phy = adapter->port[port_id].phy;
	struct link_config *lc = &adapter->port[port_id].link_config;

	phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc);

	lc->speed = speed < 0 ? SPEED_INVALID : speed;
	lc->duplex = duplex < 0 ? DUPLEX_INVALID : duplex;
	if (!(lc->requested_fc & PAUSE_AUTONEG))
		fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);

	if (link_ok && speed >= 0 && lc->autoneg == AUTONEG_ENABLE) {
		/* Set MAC speed, duplex, and flow control to match PHY. */
		struct cmac *mac = adapter->port[port_id].mac;

		mac->ops->set_speed_duplex_fc(mac, speed, duplex, fc);
		lc->fc = (unsigned char)fc;
	}
	t1_link_changed(adapter, port_id, link_ok, speed, duplex, fc);
}

static int t1_pci_intr_handler(adapter_t *adapter)
{
	u32 pcix_cause;

	pci_read_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, &pcix_cause);

	if (pcix_cause) {
		pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE,
				       pcix_cause);
		t1_fatal_err(adapter);    /* PCI errors are fatal */
	}
	return 0;
}


/*
 * Wait until Elmer's MI1 interface is ready for new operations.
 */
static int mi1_wait_until_ready(adapter_t *adapter, int mi1_reg)
{
	int attempts = 100, busy;

	do {
		u32 val;

		__t1_tpi_read(adapter, mi1_reg, &val);
		busy = val & F_MI1_OP_BUSY;
		if (busy)
			udelay(10);
	} while (busy && --attempts);
	if (busy)
		CH_ALERT("%s: MDIO operation timed out\n",
			 adapter->name);
	return busy;
}

/*
 * MI1 MDIO initialization.
 */
static void mi1_mdio_init(adapter_t *adapter, const struct board_info *bi)
{
	u32 clkdiv = bi->clock_elmer0 / (2 * bi->mdio_mdc) - 1;
	u32 val = F_MI1_PREAMBLE_ENABLE | V_MI1_MDI_INVERT(bi->mdio_mdiinv) |
		V_MI1_MDI_ENABLE(bi->mdio_mdien) | V_MI1_CLK_DIV(clkdiv);

	if (!(bi->caps & SUPPORTED_10000baseT_Full))
		val |= V_MI1_SOF(1);
	t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_CFG, val);
}

static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr,
			     int reg_addr, unsigned int *valp)
{
	u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr);

	spin_lock(&(adapter)->tpi_lock);

	/* Write the address we want. */
	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr);
	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP,
		       MI1_OP_INDIRECT_ADDRESS);
	mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);

	/* Write the operation we want. */
	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_READ);
	mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);

	/* Read the data. */
	__t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp);
	spin_unlock(&(adapter)->tpi_lock);
	return 0;
}

static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr,
			      int reg_addr, unsigned int val)
{
	u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr);

	spin_lock(&(adapter)->tpi_lock);

	/* Write the address we want. */
	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr);
	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP,
		       MI1_OP_INDIRECT_ADDRESS);
	mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);

	/* Write the data. */
	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val);
	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_WRITE);
	mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
	spin_unlock(&(adapter)->tpi_lock);
	return 0;
}

static struct mdio_ops mi1_mdio_ext_ops = {
	mi1_mdio_init,
	mi1_mdio_ext_read,
	mi1_mdio_ext_write
};

enum {
	CH_BRD_N110_1F,
	CH_BRD_N210_1F,
};

static struct board_info t1_board[] = {

{ CHBT_BOARD_N110, 1/*ports#*/,
  SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE /*caps*/, CHBT_TERM_T1,
  CHBT_MAC_PM3393, CHBT_PHY_88X2010,
  125000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/,
  1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/,
  0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops,
  &t1_mv88x201x_ops, &mi1_mdio_ext_ops,
  "Chelsio N110 1x10GBaseX NIC" },

{ CHBT_BOARD_N210, 1/*ports#*/,
  SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE /*caps*/, CHBT_TERM_T2,
  CHBT_MAC_PM3393, CHBT_PHY_88X2010,
  125000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/,
  1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/,
  0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops,
  &t1_mv88x201x_ops, &mi1_mdio_ext_ops,
  "Chelsio N210 1x10GBaseX NIC" },

};

struct pci_device_id t1_pci_tbl[] = {
	CH_DEVICE(7, 0, CH_BRD_N110_1F),
	CH_DEVICE(10, 1, CH_BRD_N210_1F),
	{ 0, }
};

MODULE_DEVICE_TABLE(pci, t1_pci_tbl);

/*
 * Return the board_info structure with a given index.  Out-of-range indices
 * return NULL.
 */
const struct board_info *t1_get_board_info(unsigned int board_id)
{
	return board_id < ARRAY_SIZE(t1_board) ? &t1_board[board_id] : NULL;
}

struct chelsio_vpd_t {
	u32 format_version;
	u8 serial_number[16];
	u8 mac_base_address[6];
	u8 pad[2];           /* make multiple-of-4 size requirement explicit */
};

#define EEPROMSIZE        (8 * 1024)
#define EEPROM_MAX_POLL   4

/*
 * Read SEEPROM. A zero is written to the flag register when the addres is
 * written to the Control register. The hardware device will set the flag to a
 * one when 4B have been transferred to the Data register.
 */
int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data)
{
	int i = EEPROM_MAX_POLL;
	u16 val;

	if (addr >= EEPROMSIZE || (addr & 3))
		return -EINVAL;

	pci_write_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, (u16)addr);
	do {
		udelay(50);
		pci_read_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, &val);
	} while (!(val & F_VPD_OP_FLAG) && --i);

	if (!(val & F_VPD_OP_FLAG)) {
		CH_ERR("%s: reading EEPROM address 0x%x failed\n",
		       adapter->name, addr);
		return -EIO;
	}
	pci_read_config_dword(adapter->pdev, A_PCICFG_VPD_DATA, data);
	*data = le32_to_cpu(*data);
	return 0;
}

static int t1_eeprom_vpd_get(adapter_t *adapter, struct chelsio_vpd_t *vpd)
{
	int addr, ret = 0;

	for (addr = 0; !ret && addr < sizeof(*vpd); addr += sizeof(u32))
		ret = t1_seeprom_read(adapter, addr,
				      (u32 *)((u8 *)vpd + addr));

	return ret;
}

/*
 * Read a port's MAC address from the VPD ROM.
 */
static int vpd_macaddress_get(adapter_t *adapter, int index, u8 mac_addr[])
{
	struct chelsio_vpd_t vpd;

	if (t1_eeprom_vpd_get(adapter, &vpd))
		return 1;
	memcpy(mac_addr, vpd.mac_base_address, 5);
	mac_addr[5] = vpd.mac_base_address[5] + index;
	return 0;
}

/*
 * Set up the MAC/PHY according to the requested link settings.
 *
 * If the PHY can auto-negotiate first decide what to advertise, then
 * enable/disable auto-negotiation as desired and reset.
 *
 * If the PHY does not auto-negotiate we just reset it.
 *
 * If auto-negotiation is off set the MAC to the proper speed/duplex/FC,
 * otherwise do it later based on the outcome of auto-negotiation.
 */
int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc)
{
	unsigned int fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);

	if (lc->supported & SUPPORTED_Autoneg) {
		lc->advertising &= ~(ADVERTISED_ASYM_PAUSE | ADVERTISED_PAUSE);
		if (fc) {
			lc->advertising |= ADVERTISED_ASYM_PAUSE;
			if (fc == (PAUSE_RX | PAUSE_TX))
				lc->advertising |= ADVERTISED_PAUSE;
		}
		phy->ops->advertise(phy, lc->advertising);

		if (lc->autoneg == AUTONEG_DISABLE) {
			lc->speed = lc->requested_speed;
			lc->duplex = lc->requested_duplex;
			lc->fc = (unsigned char)fc;
			mac->ops->set_speed_duplex_fc(mac, lc->speed,
						      lc->duplex, fc);
			/* Also disables autoneg */
			phy->ops->set_speed_duplex(phy, lc->speed, lc->duplex);
			phy->ops->reset(phy, 0);
		} else
			phy->ops->autoneg_enable(phy); /* also resets PHY */
	} else {
		mac->ops->set_speed_duplex_fc(mac, -1, -1, fc);
		lc->fc = (unsigned char)fc;
		phy->ops->reset(phy, 0);
	}
	return 0;
}

/*
 * External interrupt handler for boards using elmer0.
 */
int elmer0_ext_intr_handler(adapter_t *adapter)
{
	struct cphy *phy;
	int phy_cause;
	u32 cause;

	t1_tpi_read(adapter, A_ELMER0_INT_CAUSE, &cause);

	switch (board_info(adapter)->board) {
	case CHBT_BOARD_N210:
	case CHBT_BOARD_N110:
		if (cause & ELMER0_GP_BIT6) { /* Marvell 88x2010 interrupt */
			phy = adapter->port[0].phy;
			phy_cause = phy->ops->interrupt_handler(phy);
			if (phy_cause & cphy_cause_link_change)
				link_changed(adapter, 0);
		}
		break;
	}
	t1_tpi_write(adapter, A_ELMER0_INT_CAUSE, cause);
	return 0;
}

/* Enables all interrupts. */
void t1_interrupts_enable(adapter_t *adapter)
{
	unsigned int i;
	u32 pl_intr;

	adapter->slow_intr_mask = F_PL_INTR_SGE_ERR;

	t1_sge_intr_enable(adapter->sge);
	if (adapter->espi) {
		adapter->slow_intr_mask |= F_PL_INTR_ESPI;
		t1_espi_intr_enable(adapter->espi);
	}

	/* Enable MAC/PHY interrupts for each port. */
	for_each_port(adapter, i) {
		adapter->port[i].mac->ops->interrupt_enable(adapter->port[i].mac);
		adapter->port[i].phy->ops->interrupt_enable(adapter->port[i].phy);
	}

	/* Enable PCIX & external chip interrupts on ASIC boards. */
	pl_intr = readl(adapter->regs + A_PL_ENABLE);

	/* PCI-X interrupts */
	pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE,
			       0xffffffff);

	adapter->slow_intr_mask |= F_PL_INTR_EXT | F_PL_INTR_PCIX;
	pl_intr |= F_PL_INTR_EXT | F_PL_INTR_PCIX;
	writel(pl_intr, adapter->regs + A_PL_ENABLE);
}

/* Disables all interrupts. */
void t1_interrupts_disable(adapter_t* adapter)
{
	unsigned int i;

	t1_sge_intr_disable(adapter->sge);
	if (adapter->espi)
		t1_espi_intr_disable(adapter->espi);

	/* Disable MAC/PHY interrupts for each port. */
	for_each_port(adapter, i) {
		adapter->port[i].mac->ops->interrupt_disable(adapter->port[i].mac);
		adapter->port[i].phy->ops->interrupt_disable(adapter->port[i].phy);
	}

	/* Disable PCIX & external chip interrupts. */
	writel(0, adapter->regs + A_PL_ENABLE);

	/* PCI-X interrupts */
	pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, 0);

	adapter->slow_intr_mask = 0;
}

/* Clears all interrupts */
void t1_interrupts_clear(adapter_t* adapter)
{
	unsigned int i;
	u32 pl_intr;


	t1_sge_intr_clear(adapter->sge);
	if (adapter->espi)
		t1_espi_intr_clear(adapter->espi);

	/* Clear MAC/PHY interrupts for each port. */
	for_each_port(adapter, i) {
		adapter->port[i].mac->ops->interrupt_clear(adapter->port[i].mac);
		adapter->port[i].phy->ops->interrupt_clear(adapter->port[i].phy);
	}

	/* Enable interrupts for external devices. */
	pl_intr = readl(adapter->regs + A_PL_CAUSE);

	writel(pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX,
	       adapter->regs + A_PL_CAUSE);

	/* PCI-X interrupts */
	pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, 0xffffffff);
}

/*
 * Slow path interrupt handler for ASICs.
 */
int t1_slow_intr_handler(adapter_t *adapter)
{
	u32 cause = readl(adapter->regs + A_PL_CAUSE);

	cause &= adapter->slow_intr_mask;
	if (!cause)
		return 0;
	if (cause & F_PL_INTR_SGE_ERR)
		t1_sge_intr_error_handler(adapter->sge);
	if (cause & F_PL_INTR_ESPI)
		t1_espi_intr_handler(adapter->espi);
	if (cause & F_PL_INTR_PCIX)
		t1_pci_intr_handler(adapter);
	if (cause & F_PL_INTR_EXT)
		t1_elmer0_ext_intr(adapter);

	/* Clear the interrupts just processed. */
	writel(cause, adapter->regs + A_PL_CAUSE);
	(void)readl(adapter->regs + A_PL_CAUSE); /* flush writes */
	return 1;
}

/* Pause deadlock avoidance parameters */
#define DROP_MSEC 16
#define DROP_PKTS_CNT  1

static void set_csum_offload(adapter_t *adapter, u32 csum_bit, int enable)
{
	u32 val = readl(adapter->regs + A_TP_GLOBAL_CONFIG);

	if (enable)
		val |= csum_bit;
	else
		val &= ~csum_bit;
	writel(val, adapter->regs + A_TP_GLOBAL_CONFIG);
}

void t1_tp_set_ip_checksum_offload(adapter_t *adapter, int enable)
{
	set_csum_offload(adapter, F_IP_CSUM, enable);
}

void t1_tp_set_udp_checksum_offload(adapter_t *adapter, int enable)
{
	set_csum_offload(adapter, F_UDP_CSUM, enable);
}

void t1_tp_set_tcp_checksum_offload(adapter_t *adapter, int enable)
{
	set_csum_offload(adapter, F_TCP_CSUM, enable);
}

static void t1_tp_reset(adapter_t *adapter, unsigned int tp_clk)
{
	u32 val;

	val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM |
	      F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET;
	val |= F_TP_IN_ESPI_CHECK_IP_CSUM |
	       F_TP_IN_ESPI_CHECK_TCP_CSUM;
	writel(val, adapter->regs + A_TP_IN_CONFIG);
	writel(F_TP_OUT_CSPI_CPL |
	       F_TP_OUT_ESPI_ETHERNET |
	       F_TP_OUT_ESPI_GENERATE_IP_CSUM |
	       F_TP_OUT_ESPI_GENERATE_TCP_CSUM,
	       adapter->regs + A_TP_OUT_CONFIG);

	val = readl(adapter->regs + A_TP_GLOBAL_CONFIG);
	val &= ~(F_IP_CSUM | F_UDP_CSUM | F_TCP_CSUM);
	writel(val, adapter->regs + A_TP_GLOBAL_CONFIG);

	/*
	 * Enable pause frame deadlock prevention.
	 */
	if (is_T2(adapter)) {
		u32 drop_ticks = DROP_MSEC * (tp_clk / 1000);

		writel(F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR |
		       V_DROP_TICKS_CNT(drop_ticks) |
		       V_NUM_PKTS_DROPPED(DROP_PKTS_CNT),
		       adapter->regs + A_TP_TX_DROP_CONFIG);
	}

	writel(F_TP_RESET, adapter->regs + A_TP_RESET);
}

int __devinit t1_get_board_rev(adapter_t *adapter, const struct board_info *bi,
			       struct adapter_params *p)
{
	p->chip_version = bi->chip_term;
	if (p->chip_version == CHBT_TERM_T1 ||
	    p->chip_version == CHBT_TERM_T2) {
		u32 val = readl(adapter->regs + A_TP_PC_CONFIG);

		val = G_TP_PC_REV(val);
		if (val == 2)
			p->chip_revision = TERM_T1B;
		else if (val == 3)
			p->chip_revision = TERM_T2;
		else
			return -1;
	} else
		return -1;
	return 0;
}

/*
 * Enable board components other than the Chelsio chip, such as external MAC
 * and PHY.
 */
static int board_init(adapter_t *adapter, const struct board_info *bi)
{
	switch (bi->board) {
	case CHBT_BOARD_N110:
	case CHBT_BOARD_N210:
		writel(V_TPIPAR(0xf), adapter->regs + A_TPI_PAR);
		t1_tpi_write(adapter, A_ELMER0_GPO, 0x800);
		break;
	}
	return 0;
}

/*
 * Initialize and configure the Terminator HW modules.  Note that external
 * MAC and PHYs are initialized separately.
 */
int t1_init_hw_modules(adapter_t *adapter)
{
	int err = -EIO;
	const struct board_info *bi = board_info(adapter);

	if (!bi->clock_mc4) {
		u32 val = readl(adapter->regs + A_MC4_CFG);

		writel(val | F_READY | F_MC4_SLOW, adapter->regs + A_MC4_CFG);
		writel(F_M_BUS_ENABLE | F_TCAM_RESET,
		       adapter->regs + A_MC5_CONFIG);
	}

	if (adapter->espi && t1_espi_init(adapter->espi, bi->chip_mac,
					  bi->espi_nports))
		goto out_err;

	t1_tp_reset(adapter, bi->clock_core);

	err = t1_sge_configure(adapter->sge, &adapter->params.sge);
	if (err)
		goto out_err;

	err = 0;
 out_err:
	return err;
}

/*
 * Determine a card's PCI mode.
 */
static void __devinit get_pci_mode(adapter_t *adapter, struct chelsio_pci_params *p)
{
	static const unsigned short speed_map[] = { 33, 66, 100, 133 };
	u32 pci_mode;

	pci_read_config_dword(adapter->pdev, A_PCICFG_MODE, &pci_mode);
	p->speed = speed_map[G_PCI_MODE_CLK(pci_mode)];
	p->width = (pci_mode & F_PCI_MODE_64BIT) ? 64 : 32;
	p->is_pcix = (pci_mode & F_PCI_MODE_PCIX) != 0;
}

/*
 * Release the structures holding the SW per-Terminator-HW-module state.
 */
void t1_free_sw_modules(adapter_t *adapter)
{
	unsigned int i;

	for_each_port(adapter, i) {
		struct cmac *mac = adapter->port[i].mac;
		struct cphy *phy = adapter->port[i].phy;

		if (mac)
			mac->ops->destroy(mac);
		if (phy)
			phy->ops->destroy(phy);
	}

	if (adapter->sge)
		t1_sge_destroy(adapter->sge);
	if (adapter->espi)
		t1_espi_destroy(adapter->espi);
}

static void __devinit init_link_config(struct link_config *lc,
				       const struct board_info *bi)
{
	lc->supported = bi->caps;
	lc->requested_speed = lc->speed = SPEED_INVALID;
	lc->requested_duplex = lc->duplex = DUPLEX_INVALID;
	lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX;
	if (lc->supported & SUPPORTED_Autoneg) {
		lc->advertising = lc->supported;
		lc->autoneg = AUTONEG_ENABLE;
		lc->requested_fc |= PAUSE_AUTONEG;
	} else {
		lc->advertising = 0;
		lc->autoneg = AUTONEG_DISABLE;
	}
}


/*
 * Allocate and initialize the data structures that hold the SW state of
 * the Terminator HW modules.
 */
int __devinit t1_init_sw_modules(adapter_t *adapter,
				 const struct board_info *bi)
{
	unsigned int i;

	adapter->params.brd_info = bi;
	adapter->params.nports = bi->port_number;
	adapter->params.stats_update_period = bi->gmac->stats_update_period;

	adapter->sge = t1_sge_create(adapter, &adapter->params.sge);
	if (!adapter->sge) {
		CH_ERR("%s: SGE initialization failed\n",
		       adapter->name);
		goto error;
	}

	if (bi->espi_nports && !(adapter->espi = t1_espi_create(adapter))) {
		CH_ERR("%s: ESPI initialization failed\n",
		       adapter->name);
		goto error;
	}

	board_init(adapter, bi);
	bi->mdio_ops->init(adapter, bi);
	if (bi->gphy->reset)
		bi->gphy->reset(adapter);
	if (bi->gmac->reset)
		bi->gmac->reset(adapter);

	for_each_port(adapter, i) {
		u8 hw_addr[6];
		struct cmac *mac;
		int phy_addr = bi->mdio_phybaseaddr + i;

		adapter->port[i].phy = bi->gphy->create(adapter, phy_addr,
							bi->mdio_ops);
		if (!adapter->port[i].phy) {
			CH_ERR("%s: PHY %d initialization failed\n",
			       adapter->name, i);
			goto error;
		}

		adapter->port[i].mac = mac = bi->gmac->create(adapter, i);
		if (!mac) {
			CH_ERR("%s: MAC %d initialization failed\n",
			       adapter->name, i);
			goto error;
		}

		/*
		 * Get the port's MAC addresses either from the EEPROM if one
		 * exists or the one hardcoded in the MAC.
		 */
		if (vpd_macaddress_get(adapter, i, hw_addr)) {
			CH_ERR("%s: could not read MAC address from VPD ROM\n",
			       adapter->port[i].dev->name);
			goto error;
		}
		memcpy(adapter->port[i].dev->dev_addr, hw_addr, ETH_ALEN);
		init_link_config(&adapter->port[i].link_config, bi);
	}

	get_pci_mode(adapter, &adapter->params.pci);
	t1_interrupts_clear(adapter);
	return 0;

 error:
	t1_free_sw_modules(adapter);
	return -1;
}