1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
|
/**
* OMAP and TWL PMIC specific intializations.
*
* Copyright (C) 2010 Texas Instruments Incorporated.
* Thara Gopinath
* Copyright (C) 2009 Texas Instruments Incorporated.
* Nishanth Menon
* Copyright (C) 2009 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/err.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/i2c/twl.h>
#include <plat/voltage.h>
#include "pm.h"
#define OMAP3_SRI2C_SLAVE_ADDR 0x12
#define OMAP3_VDD_MPU_SR_CONTROL_REG 0x00
#define OMAP3_VDD_CORE_SR_CONTROL_REG 0x01
#define OMAP3_VP_CONFIG_ERROROFFSET 0x00
#define OMAP3_VP_VSTEPMIN_VSTEPMIN 0x1
#define OMAP3_VP_VSTEPMAX_VSTEPMAX 0x04
#define OMAP3_VP_VLIMITTO_TIMEOUT_US 200
#define OMAP3430_VP1_VLIMITTO_VDDMIN 0x14
#define OMAP3430_VP1_VLIMITTO_VDDMAX 0x42
#define OMAP3430_VP2_VLIMITTO_VDDMIN 0x18
#define OMAP3430_VP2_VLIMITTO_VDDMAX 0x2c
#define OMAP3630_VP1_VLIMITTO_VDDMIN 0x18
#define OMAP3630_VP1_VLIMITTO_VDDMAX 0x3c
#define OMAP3630_VP2_VLIMITTO_VDDMIN 0x18
#define OMAP3630_VP2_VLIMITTO_VDDMAX 0x30
#define OMAP4_SRI2C_SLAVE_ADDR 0x12
#define OMAP4_VDD_MPU_SR_VOLT_REG 0x55
#define OMAP4_VDD_IVA_SR_VOLT_REG 0x5B
#define OMAP4_VDD_CORE_SR_VOLT_REG 0x61
#define OMAP4_VP_CONFIG_ERROROFFSET 0x00
#define OMAP4_VP_VSTEPMIN_VSTEPMIN 0x01
#define OMAP4_VP_VSTEPMAX_VSTEPMAX 0x04
#define OMAP4_VP_VLIMITTO_TIMEOUT_US 200
#define OMAP4_VP_MPU_VLIMITTO_VDDMIN 0xA
#define OMAP4_VP_MPU_VLIMITTO_VDDMAX 0x39
#define OMAP4_VP_IVA_VLIMITTO_VDDMIN 0xA
#define OMAP4_VP_IVA_VLIMITTO_VDDMAX 0x2D
#define OMAP4_VP_CORE_VLIMITTO_VDDMIN 0xA
#define OMAP4_VP_CORE_VLIMITTO_VDDMAX 0x28
static bool is_offset_valid;
static u8 smps_offset;
#define REG_SMPS_OFFSET 0xE0
static unsigned long twl4030_vsel_to_uv(const u8 vsel)
{
return (((vsel * 125) + 6000)) * 100;
}
static u8 twl4030_uv_to_vsel(unsigned long uv)
{
return DIV_ROUND_UP(uv - 600000, 12500);
}
static unsigned long twl6030_vsel_to_uv(const u8 vsel)
{
/*
* In TWL6030 depending on the value of SMPS_OFFSET
* efuse register the voltage range supported in
* standard mode can be either between 0.6V - 1.3V or
* 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse
* is programmed to all 0's where as starting from
* TWL6030 ES1.1 the efuse is programmed to 1
*/
if (!is_offset_valid) {
twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset,
REG_SMPS_OFFSET);
is_offset_valid = true;
}
/*
* There is no specific formula for voltage to vsel
* conversion above 1.3V. There are special hardcoded
* values for voltages above 1.3V. Currently we are
* hardcoding only for 1.35 V which is used for 1GH OPP for
* OMAP4430.
*/
if (vsel == 0x3A)
return 1350000;
if (smps_offset & 0x8)
return ((((vsel - 1) * 125) + 7000)) * 100;
else
return ((((vsel - 1) * 125) + 6000)) * 100;
}
static u8 twl6030_uv_to_vsel(unsigned long uv)
{
/*
* In TWL6030 depending on the value of SMPS_OFFSET
* efuse register the voltage range supported in
* standard mode can be either between 0.6V - 1.3V or
* 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse
* is programmed to all 0's where as starting from
* TWL6030 ES1.1 the efuse is programmed to 1
*/
if (!is_offset_valid) {
twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset,
REG_SMPS_OFFSET);
is_offset_valid = true;
}
/*
* There is no specific formula for voltage to vsel
* conversion above 1.3V. There are special hardcoded
* values for voltages above 1.3V. Currently we are
* hardcoding only for 1.35 V which is used for 1GH OPP for
* OMAP4430.
*/
if (uv == 1350000)
return 0x3A;
if (smps_offset & 0x8)
return DIV_ROUND_UP(uv - 700000, 12500) + 1;
else
return DIV_ROUND_UP(uv - 600000, 12500) + 1;
}
static struct omap_volt_pmic_info omap3_mpu_volt_info = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1200000,
.onlp_volt = 1000000,
.ret_volt = 975000,
.off_volt = 600000,
.volt_setup_time = 0xfff,
.vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
.vp_vddmin = OMAP3430_VP1_VLIMITTO_VDDMIN,
.vp_vddmax = OMAP3430_VP1_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
.pmic_reg = OMAP3_VDD_MPU_SR_CONTROL_REG,
.vsel_to_uv = twl4030_vsel_to_uv,
.uv_to_vsel = twl4030_uv_to_vsel,
};
static struct omap_volt_pmic_info omap3_core_volt_info = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1200000,
.onlp_volt = 1000000,
.ret_volt = 975000,
.off_volt = 600000,
.volt_setup_time = 0xfff,
.vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
.vp_vddmin = OMAP3430_VP2_VLIMITTO_VDDMIN,
.vp_vddmax = OMAP3430_VP2_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
.pmic_reg = OMAP3_VDD_CORE_SR_CONTROL_REG,
.vsel_to_uv = twl4030_vsel_to_uv,
.uv_to_vsel = twl4030_uv_to_vsel,
};
static struct omap_volt_pmic_info omap4_mpu_volt_info = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1350000,
.onlp_volt = 1350000,
.ret_volt = 837500,
.off_volt = 600000,
.volt_setup_time = 0,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
.vp_vddmin = OMAP4_VP_MPU_VLIMITTO_VDDMIN,
.vp_vddmax = OMAP4_VP_MPU_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
.pmic_reg = OMAP4_VDD_MPU_SR_VOLT_REG,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
static struct omap_volt_pmic_info omap4_iva_volt_info = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1100000,
.onlp_volt = 1100000,
.ret_volt = 837500,
.off_volt = 600000,
.volt_setup_time = 0,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
.vp_vddmin = OMAP4_VP_IVA_VLIMITTO_VDDMIN,
.vp_vddmax = OMAP4_VP_IVA_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
.pmic_reg = OMAP4_VDD_IVA_SR_VOLT_REG,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
static struct omap_volt_pmic_info omap4_core_volt_info = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1100000,
.onlp_volt = 1100000,
.ret_volt = 837500,
.off_volt = 600000,
.volt_setup_time = 0,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
.vp_vddmin = OMAP4_VP_CORE_VLIMITTO_VDDMIN,
.vp_vddmax = OMAP4_VP_CORE_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
.pmic_reg = OMAP4_VDD_CORE_SR_VOLT_REG,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
int __init omap4_twl_init(void)
{
struct voltagedomain *voltdm;
if (!cpu_is_omap44xx())
return -ENODEV;
voltdm = omap_voltage_domain_lookup("mpu");
omap_voltage_register_pmic(voltdm, &omap4_mpu_volt_info);
voltdm = omap_voltage_domain_lookup("iva");
omap_voltage_register_pmic(voltdm, &omap4_iva_volt_info);
voltdm = omap_voltage_domain_lookup("core");
omap_voltage_register_pmic(voltdm, &omap4_core_volt_info);
return 0;
}
int __init omap3_twl_init(void)
{
struct voltagedomain *voltdm;
if (!cpu_is_omap34xx())
return -ENODEV;
if (cpu_is_omap3630()) {
omap3_mpu_volt_info.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN;
omap3_mpu_volt_info.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX;
omap3_core_volt_info.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN;
omap3_core_volt_info.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX;
}
voltdm = omap_voltage_domain_lookup("mpu");
omap_voltage_register_pmic(voltdm, &omap3_mpu_volt_info);
voltdm = omap_voltage_domain_lookup("core");
omap_voltage_register_pmic(voltdm, &omap3_core_volt_info);
return 0;
}
|
