# drivers/sound/Config.in # # 18 Apr 1998, Michael Elizabeth Chastain, <mailto:mec@shout.net> # More hacking for modularisation. # # Prompt user for primary drivers. config SOUND_BT878 tristate "BT878 audio dma" depends on SOUND_PRIME && PCI ---help--- Audio DMA support for bt878 based grabber boards. As you might have already noticed, bt878 is listed with two functions in /proc/pci. Function 0 does the video stuff (bt848 compatible), function 1 does the same for audio data. This is a driver for the audio part of the chip. If you say 'Y' here you get a oss-compatible dsp device where you can record from. If you want just watch TV you probably don't need this driver as most TV cards handle sound with a short cable from the TV card to your sound card's line-in. To compile this driver as a module, choose M here: the module will be called btaudio. config SOUND_EMU10K1 tristate "Creative SBLive! (EMU10K1)" depends on SOUND_PRIME && PCI ---help--- Say Y or M if you have a PCI sound card using the EMU10K1 chipset, such as the Creative SBLive!, SB PCI512 or Emu-APS. For more information on this driver and the degree of support for the different card models please check: <http://sourceforge.net/projects/emu10k1/> It is now possible to load dsp microcode patches into the EMU10K1 chip. These patches are used to implement real time sound processing effects which include for example: signal routing, bass/treble control, AC3 passthrough, ... Userspace tools to create new patches and load/unload them can be found in the emu-tools package at the above URL. config MIDI_EMU10K1 bool "Creative SBLive! MIDI (EXPERIMENTAL)" depends on SOUND_EMU10K1 && EXPERIMENTAL && ISA_DMA_API help Say Y if you want to be able to use the OSS /dev/sequencer interface. This code is still experimental. config SOUND_FUSION tristate "Crystal SoundFusion (CS4280/461x)" depends on SOUND_PRIME && PCI help This module drives the Crystal SoundFusion devices (CS4280/46xx series) when wired as native sound drivers with AC97 codecs. If this driver does not work try the CS4232 driver. config SOUND_BCM_CS4297A tristate "Crystal Sound CS4297a (for Swarm)" depends on SOUND_PRIME && SIBYTE_SWARM help The BCM91250A has a Crystal CS4297a on synchronous serial port B (in addition to the DB-9 serial port). Say Y or M here to enable the sound chip instead of the UART. Also note that CONFIG_KGDB should not be enabled at the same time, since it also attempts to use this UART port. config SOUND_ES1371 tristate "Creative Ensoniq AudioPCI 97 (ES1371)" depends on SOUND_PRIME && PCI help Say Y or M if you have a PCI sound card utilizing the Ensoniq ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if your sound card uses an ES1371 without removing your computer's cover, use lspci -n and look for the PCI ID 1274:1371. Since Ensoniq was bought by Creative Labs, Sound Blaster 64/PCI models are either ES1370 or ES1371 based. This driver differs slightly from OSS/Free, so PLEASE READ <file:Documentation/sound/oss/es1371>. config SOUND_ICH tristate "Intel ICH (i8xx) audio support" depends on SOUND_PRIME && PCI help Support for integral audio in Intel's I/O Controller Hub (ICH) chipset, as used on the 810/820/840 motherboards. config SOUND_VWSND tristate "SGI Visual Workstation Sound" depends on SOUND_PRIME && X86_VISWS help Say Y or M if you have an SGI Visual Workstation and you want to be able to use its on-board audio. Read <file:Documentation/sound/oss/vwsnd> for more info on this driver's capabilities. config SOUND_HAL2 tristate "SGI HAL2 sound (EXPERIMENTAL)" depends on SOUND_PRIME && SGI_IP22 && EXPERIMENTAL help Say Y or M if you have an SGI Indy system and want to be able to use it's on-board A2 audio system. config SOUND_IT8172 tristate "IT8172G Sound" depends on SOUND_PRIME && (MIPS_ITE8172 || MIPS_IVR) config SOUND_VRC5477 tristate "NEC Vrc5477 AC97 sound" depends on SOUND_PRIME && DDB5477 help Say Y here to enable sound support for the NEC Vrc5477 chip, an integrated, multi-function controller chip for MIPS CPUs. Works with the AC97 codec. config SOUND_AU1550_AC97 tristate "Au1550 AC97 Sound" depends on SOUND_PRIME && SOC_AU1550 config SOUND_TRIDENT tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core" depends on SOUND_PRIME && PCI ---help--- Say Y or M if you have a PCI sound card utilizing the Trident 4DWave-DX/NX chipset or your mother board chipset has SiS 7018 or ALi 5451 built-in. The SiS 7018 PCI Audio Core is embedded in SiS960 Super South Bridge and SiS540/630 Single Chipset. The ALi 5451 PCI Audio Core is embedded in ALi M1535, M1535D, M1535+ or M1535D+ South Bridge. Use lspci -n to find out if your sound card or chipset uses Trident 4DWave or SiS 7018. PCI ID 1023:2000 or 1023:2001 stands for Trident 4Dwave. PCI ID 1039:7018 stands for SiS7018. PCI ID 10B9:5451 stands for ALi5451. This driver supports S/PDIF in/out (record/playback) for ALi 5451 embedded in ALi M1535+ and M1535D+. Note that they aren't all enabled by default; you can enable them by saying Y to "/proc file system support" and "Sysctl support", and after the /proc file system has been mounted, executing the command command what is enabled echo 0>/proc/ALi5451 pcm out is also set to S/PDIF out. (Default). echo 1>/proc/ALi5451 use S/PDIF out to output pcm data. echo 2>/proc/ALi5451 use S/PDIF out to output non-pcm data. (AC3...). echo 3>/proc/ALi5451 record from Ac97 in(MIC, Line in...). (Default). echo 4>/proc/ALi5451 no matter Ac97 settings, record from S/PDIF in. This driver differs slightly from OSS/Free, so PLEASE READ the comments at the top of <file:drivers/sound/trident.c>. config SOUND_MSNDCLAS tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey" depends on SOUND_PRIME && (m || !STANDALONE) help Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or Monterey (not for the Pinnacle or Fiji). See <file:Documentation/sound/oss/MultiSound> for important information about this driver. Note that it has been discontinued, but the Voyetra Turtle Beach knowledge base entry for it is still available at <http://www.turtlebeach.com/site/kb_ftp/790.asp>. comment "Compiled-in MSND Classic support requires firmware during compilation." depends on SOUND_PRIME && SOUND_MSNDCLAS=y config MSNDCLAS_HAVE_BOOT bool depends on SOUND_MSNDCLAS=y && !STANDALONE default y config MSNDCLAS_INIT_FILE string "Full pathname of MSNDINIT.BIN firmware file" depends on SOUND_MSNDCLAS default "/etc/sound/msndinit.bin" help The MultiSound cards have two firmware files which are required for operation, and are not currently included. These files can be obtained from Turtle Beach. See <file:Documentation/sound/oss/MultiSound> for information on how to obtain this. config MSNDCLAS_PERM_FILE string "Full pathname of MSNDPERM.BIN firmware file" depends on SOUND_MSNDCLAS default "/etc/sound/msndperm.bin" help The MultiSound cards have two firmware files which are required for operation, and are not currently included. These files can be obtained from Turtle Beach. See <file:Documentation/sound/oss/MultiSound> for information on how to obtain this. config MSNDCLAS_IRQ int "MSND Classic IRQ 5, 7, 9, 10, 11, 12" depends on SOUND_MSNDCLAS=y default "5" help Interrupt Request line for the MultiSound Classic and related cards. config MSNDCLAS_MEM hex "MSND Classic memory B0000, C8000, D0000, D8000, E0000, E8000" depends on SOUND_MSNDCLAS=y default "D0000" help Memory-mapped I/O base address for the MultiSound Classic and related cards. config MSNDCLAS_IO hex "MSND Classic I/O 210, 220, 230, 240, 250, 260, 290, 3E0" depends on SOUND_MSNDCLAS=y default "290" help I/O port address for the MultiSound Classic and related cards. config SOUND_MSNDPIN tristate "Support for Turtle Beach MultiSound Pinnacle, Fiji" depends on SOUND_PRIME && (m || !STANDALONE) help Say M here if you have a Turtle Beach MultiSound Pinnacle or Fiji. See <file:Documentation/sound/oss/MultiSound> for important information about this driver. Note that it has been discontinued, but the Voyetra Turtle Beach knowledge base entry for it is still available at <http://www.turtlebeach.com/site/kb_ftp/600.asp>. comment "Compiled-in MSND Pinnacle support requires firmware during compilation." depends on SOUND_PRIME && SOUND_MSNDPIN=y config MSNDPIN_HAVE_BOOT bool depends on SOUND_MSNDPIN=y default y config MSNDPIN_INIT_FILE string "Full pathname of PNDSPINI.BIN firmware file" depends on SOUND_MSNDPIN default "/etc/sound/pndspini.bin" help The MultiSound cards have two firmware files which are required for operation, and are not currently included. These files can be obtained from Turtle Beach. See <file:Documentation/sound/oss/MultiSound> for information on how to obtain this. config MSNDPIN_PERM_FILE string "Full pathname of PNDSPERM.BIN firmware file" depends on SOUND_MSNDPIN default "/etc/sound/pndsperm.bin" help The MultiSound cards have two firmware files which are required for operation, and are not currently included. These files can be obtained from Turtle Beach. See <file:Documentation/sound/oss/MultiSound> for information on how to obtain this. config MSNDPIN_IRQ int "MSND Pinnacle IRQ 5, 7, 9, 10, 11, 12" depends on SOUND_MSNDPIN=y default "5" help Interrupt request line for the primary synthesizer on MultiSound Pinnacle and Fiji sound cards. config MSNDPIN_MEM hex "MSND Pinnacle memory B0000, C8000, D0000, D8000, E0000, E8000" depends on SOUND_MSNDPIN=y default "D0000" help Memory-mapped I/O base address for the primary synthesizer on MultiSound Pinnacle and Fiji sound cards. config MSNDPIN_IO hex "MSND Pinnacle I/O 210, 220, 230, 240, 250, 260, 290, 3E0" depends on SOUND_MSNDPIN=y default "290" help Memory-mapped I/O base address for the primary synthesizer on MultiSound Pinnacle and Fiji sound cards. config MSNDPIN_DIGITAL bool "MSND Pinnacle has S/PDIF I/O" depends on SOUND_MSNDPIN=y help If you have the S/PDIF daughter board for the Pinnacle or Fiji, answer Y here; otherwise, say N. If you have this, you will be able to play and record from the S/PDIF port (digital signal). See <file:Documentation/sound/oss/MultiSound> for information on how to make use of this capability. config MSNDPIN_NONPNP bool "MSND Pinnacle non-PnP Mode" depends on SOUND_MSNDPIN=y help The Pinnacle and Fiji card resources can be configured either with PnP, or through a configuration port. Say Y here if your card is NOT in PnP mode. For the Pinnacle, configuration in non-PnP mode allows use of the IDE and joystick peripherals on the card as well; these do not show up when the card is in PnP mode. Specifying zero for any resource of a device will disable the device. If you are running the card in PnP mode, you must say N here and use isapnptools to configure the card's resources. comment "MSND Pinnacle DSP section will be configured to above parameters." depends on SOUND_PRIME && SOUND_MSNDPIN=y && MSNDPIN_NONPNP config MSNDPIN_CFG hex "MSND Pinnacle config port 250,260,270" depends on MSNDPIN_NONPNP default "250" help This is the port which the Pinnacle and Fiji uses to configure the card's resources when not in PnP mode. If your card is in PnP mode, then be sure to say N to the previous option, "MSND Pinnacle Non-PnP Mode". comment "Pinnacle-specific Device Configuration (0 disables)" depends on SOUND_PRIME && SOUND_MSNDPIN=y && MSNDPIN_NONPNP config MSNDPIN_MPU_IO hex "MSND Pinnacle MPU I/O (e.g. 330)" depends on MSNDPIN_NONPNP default "0" help Memory-mapped I/O base address for the Kurzweil daughterboard synthesizer on MultiSound Pinnacle and Fiji sound cards. config MSNDPIN_MPU_IRQ int "MSND Pinnacle MPU IRQ (e.g. 9)" depends on MSNDPIN_NONPNP default "0" help Interrupt request number for the Kurzweil daughterboard synthesizer on MultiSound Pinnacle and Fiji sound cards. config MSNDPIN_IDE_IO0 hex "MSND Pinnacle IDE I/O 0 (e.g. 170)" depends on MSNDPIN_NONPNP default "0" help CD-ROM drive 0 memory-mapped I/O base address for the MultiSound Pinnacle and Fiji sound cards. config MSNDPIN_IDE_IO1 hex "MSND Pinnacle IDE I/O 1 (e.g. 376)" depends on MSNDPIN_NONPNP default "0" help CD-ROM drive 1 memory-mapped I/O base address for the MultiSound Pinnacle and Fiji sound cards. config MSNDPIN_IDE_IRQ int "MSND Pinnacle IDE IRQ (e.g. 15)" depends on MSNDPIN_NONPNP default "0" help Interrupt request number for the IDE CD-ROM interface on the MultiSound Pinnacle and Fiji sound cards. config MSNDPIN_JOYSTICK_IO hex "MSND Pinnacle joystick I/O (e.g. 200)" depends on MSNDPIN_NONPNP default "0" help Memory-mapped I/O base address for the joystick port on MultiSound Pinnacle and Fiji sound cards. config MSND_FIFOSIZE int "MSND buffer size (kB)" depends on SOUND_PRIME && (SOUND_MSNDPIN=y || SOUND_MSNDCLAS=y) default "128" help Configures the size of each audio buffer, in kilobytes, for recording and playing in the MultiSound drivers (both the Classic and Pinnacle). Larger values reduce the chance of data overruns at the expense of overall latency. If unsure, use the default. config SOUND_VIA82CXXX tristate "VIA 82C686 Audio Codec" depends on SOUND_PRIME && PCI help Say Y here to include support for the audio codec found on VIA 82Cxxx-based chips. Typically these are built into a motherboard. DO NOT select Sound Blaster or Adlib with this driver, unless you have a Sound Blaster or Adlib card in addition to your VIA audio chip. config MIDI_VIA82CXXX bool "VIA 82C686 MIDI" depends on SOUND_VIA82CXXX && ISA_DMA_API help Answer Y to use the MIDI interface of the Via686. You may need to enable this in the BIOS before it will work. This is for connection to external MIDI hardware, and is not required for software playback of MIDI files. config SOUND_OSS tristate "OSS sound modules" depends on SOUND_PRIME && ISA_DMA_API help OSS is the Open Sound System suite of sound card drivers. They make sound programming easier since they provide a common API. Say Y or M here (the module will be called sound) if you haven't found a driver for your sound card above, then pick your driver from the list below. config SOUND_TRACEINIT bool "Verbose initialisation" depends on SOUND_OSS help Verbose soundcard initialization -- affects the format of autoprobe and initialization messages at boot time. config SOUND_DMAP bool "Persistent DMA buffers" depends on SOUND_OSS ---help--- Linux can often have problems allocating DMA buffers for ISA sound cards on machines with more than 16MB of RAM. This is because ISA DMA buffers must exist below the 16MB boundary and it is quite possible that a large enough free block in this region cannot be found after the machine has been running for a while. If you say Y here the DMA buffers (64Kb) will be allocated at boot time and kept until the shutdown. This option is only useful if you said Y to "OSS sound modules", above. If you said M to "OSS sound modules" then you can get the persistent DMA buffer functionality by passing the command-line argument "dmabuf=1" to the sound module. Say Y unless you have 16MB or more RAM or a PCI sound card. config SOUND_AD1816 tristate "AD1816(A) based cards (EXPERIMENTAL)" depends on EXPERIMENTAL && SOUND_OSS help Say M here if you have a sound card based on the Analog Devices AD1816(A) chip. If you compile the driver into the kernel, you have to add "ad1816=<io>,<irq>,<dma>,<dma2>" to the kernel command line. config SOUND_AD1889 tristate "AD1889 based cards (AD1819 codec) (EXPERIMENTAL)" depends on EXPERIMENTAL && SOUND_OSS && PCI help Say M here if you have a sound card based on the Analog Devices AD1889 chip. config SOUND_ADLIB tristate "Adlib Cards" depends on SOUND_OSS help Includes ASB 64 4D. Information on programming AdLib cards is available at <http://www.itsnet.com/home/ldragon/Specs/adlib.html>. config SOUND_ACI_MIXER tristate "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20)" depends on SOUND_OSS ---help--- ACI (Audio Command Interface) is a protocol used to communicate with the microcontroller on some sound cards produced by miro and Cardinal Technologies. The main function of the ACI is to control the mixer and to get a product identification. This VoxWare ACI driver currently supports the ACI functions on the miroSOUND PCM1-pro, PCM12 and PCM20 radio. On the PCM20 radio, ACI also controls the radio tuner. This is supported in the video4linux miropcm20 driver (say M or Y here and go back to "Multimedia devices" -> "Radio Adapters"). This driver is also available as a module and will be called aci. config SOUND_CS4232 tristate "Crystal CS4232 based (PnP) cards" depends on SOUND_OSS help Say Y here if you have a card based on the Crystal CS4232 chip set, which uses its own Plug and Play protocol. If you compile the driver into the kernel, you have to add "cs4232=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel command line. See <file:Documentation/sound/oss/CS4232> for more information on configuring this card. config SOUND_VMIDI tristate "Loopback MIDI device support" depends on SOUND_OSS help Support for MIDI loopback on port 1 or 2. config SOUND_TRIX tristate "MediaTrix AudioTrix Pro support" depends on SOUND_OSS help Answer Y if you have the AudioTriX Pro sound card manufactured by MediaTrix. config TRIX_HAVE_BOOT bool "Have TRXPRO.HEX firmware file" depends on SOUND_TRIX=y && !STANDALONE help The MediaTrix AudioTrix Pro has an on-board microcontroller which needs to be initialized by downloading the code from the file TRXPRO.HEX in the DOS driver directory. If you don't have the TRXPRO.HEX file handy you may skip this step. However, the SB and MPU-401 modes of AudioTrix Pro will not work without this file! config TRIX_BOOT_FILE string "Full pathname of TRXPRO.HEX firmware file" depends on TRIX_HAVE_BOOT default "/etc/sound/trxpro.hex" help Enter the full pathname of your TRXPRO.HEX file, starting from /. config SOUND_MSS tristate "Microsoft Sound System support" depends on SOUND_OSS ---help--- Again think carefully before answering Y to this question. It's safe to answer Y if you have the original Windows Sound System card made by Microsoft or Aztech SG 16 Pro (or NX16 Pro). Also you may say Y in case your card is NOT among these: ATI Stereo F/X, AdLib, Audio Excell DSP16, Cardinal DSP16, Ensoniq SoundScape (and compatibles made by Reveal and Spea), Gravis Ultrasound, Gravis Ultrasound ACE, Gravis Ultrasound Max, Gravis Ultrasound with 16 bit option, Logitech Sound Man 16, Logitech SoundMan Games, Logitech SoundMan Wave, MAD16 Pro (OPTi 82C929), Media Vision Jazz16, MediaTriX AudioTriX Pro, Microsoft Windows Sound System (MSS/WSS), Mozart (OAK OTI-601), Orchid SW32, Personal Sound System (PSS), Pro Audio Spectrum 16, Pro Audio Studio 16, Pro Sonic 16, Roland MPU-401 MIDI interface, Sound Blaster 1.0, Sound Blaster 16, Sound Blaster 16ASP, Sound Blaster 2.0, Sound Blaster AWE32, Sound Blaster Pro, TI TM4000M notebook, ThunderBoard, Turtle Beach Tropez, Yamaha FM synthesizers (OPL2, OPL3 and OPL4), 6850 UART MIDI Interface. For cards having native support in VoxWare, consult the card specific instructions in <file:Documentation/sound/oss/README.OSS>. Some drivers have their own MSS support and saying Y to this option will cause a conflict. If you compile the driver into the kernel, you have to add "ad1848=<io>,<irq>,<dma>,<dma2>[,<type>]" to the kernel command line. config SOUND_MPU401 tristate "MPU-401 support (NOT for SB16)" depends on SOUND_OSS ---help--- Be careful with this question. The MPU401 interface is supported by all sound cards. However, some natively supported cards have their own driver for MPU401. Enabling this MPU401 option with these cards will cause a conflict. Also, enabling MPU401 on a system that doesn't really have a MPU401 could cause some trouble. If your card was in the list of supported cards, look at the card specific instructions in the <file:Documentation/sound/oss/README.OSS> file. It is safe to answer Y if you have a true MPU401 MIDI interface card. If you compile the driver into the kernel, you have to add "mpu401=<io>,<irq>" to the kernel command line. config SOUND_NM256 tristate "NM256AV/NM256ZX audio support" depends on SOUND_OSS help Say M here to include audio support for the NeoMagic 256AV/256ZX chipsets. These are the audio chipsets found in the Sony Z505S/SX/DX, some Sony F-series, and the Dell Latitude CPi and CPt laptops. It includes support for an AC97-compatible mixer and an apparently proprietary sound engine. See <file:Documentation/sound/oss/NM256> for further information. config SOUND_PAS tristate "ProAudioSpectrum 16 support" depends on SOUND_OSS ---help--- Answer Y only if you have a Pro Audio Spectrum 16, ProAudio Studio 16 or Logitech SoundMan 16 sound card. Answer N if you have some other card made by Media Vision or Logitech since those are not PAS16 compatible. Please read <file:Documentation/sound/oss/PAS16>. It is not necessary to add Sound Blaster support separately; it is included in PAS support. If you compile the driver into the kernel, you have to add "pas2=<io>,<irq>,<dma>,<dma2>,<sbio>,<sbirq>,<sbdma>,<sbdma2> to the kernel command line. config PAS_JOYSTICK bool "Enable PAS16 joystick port" depends on SOUND_PAS=y help Say Y here to enable the Pro Audio Spectrum 16's auxiliary joystick port. config SOUND_PSS tristate "PSS (AD1848, ADSP-2115, ESC614) support" depends on SOUND_OSS help Answer Y or M if you have an Orchid SW32, Cardinal DSP16, Beethoven ADSP-16 or some other card based on the PSS chipset (AD1848 codec + ADSP-2115 DSP chip + Echo ESC614 ASIC CHIP). For more information on how to compile it into the kernel or as a module see the file <file:Documentation/sound/oss/PSS>. If you compile the driver into the kernel, you have to add "pss=<io>,<mssio>,<mssirq>,<mssdma>,<mpuio>,<mpuirq>" to the kernel command line. config PSS_MIXER bool "Enable PSS mixer (Beethoven ADSP-16 and other compatibile)" depends on SOUND_PSS help Answer Y for Beethoven ADSP-16. You may try to say Y also for other cards if they have master volume, bass, treble, and you can't control it under Linux. If you answer N for Beethoven ADSP-16, you can't control master volume, bass, treble and synth volume. If you said M to "PSS support" above, you may enable or disable this PSS mixer with the module parameter pss_mixer. For more information see the file <file:Documentation/sound/oss/PSS>. config PSS_HAVE_BOOT bool "Have DSPxxx.LD firmware file" depends on SOUND_PSS && !STANDALONE help If you have the DSPxxx.LD file or SYNTH.LD file for you card, say Y to include this file. Without this file the synth device (OPL) may not work. config PSS_BOOT_FILE string "Full pathname of DSPxxx.LD firmware file" depends on PSS_HAVE_BOOT default "/etc/sound/dsp001.ld" help Enter the full pathname of your DSPxxx.LD file or SYNTH.LD file, starting from /. config SOUND_SB tristate "100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support" depends on SOUND_OSS ---help--- Answer Y if you have an original Sound Blaster card made by Creative Labs or a 100% hardware compatible clone (like the Thunderboard or SM Games). For an unknown card you may answer Y if the card claims to be Sound Blaster-compatible. Please read the file <file:Documentation/sound/oss/Soundblaster>. You should also say Y here for cards based on the Avance Logic ALS-007 and ALS-1X0 chips (read <file:Documentation/sound/oss/ALS>) and for cards based on ESS chips (read <file:Documentation/sound/oss/ESS1868> and <file:Documentation/sound/oss/ESS>). If you have an SB AWE 32 or SB AWE 64, say Y here and also to "AWE32 synth" below and read <file:Documentation/sound/oss/INSTALL.awe>. If you have an IBM Mwave card, say Y here and read <file:Documentation/sound/oss/mwave>. If you compile the driver into the kernel and don't want to use isapnp, you have to add "sb=<io>,<irq>,<dma>,<dma2>" to the kernel command line. You can say M here to compile this driver as a module; the module is called sb. config SOUND_YM3812 tristate "Yamaha FM synthesizer (YM3812/OPL-3) support" depends on SOUND_OSS ---help--- Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4). Answering Y is usually a safe and recommended choice, however some cards may have software (TSR) FM emulation. Enabling FM support with these cards may cause trouble (I don't currently know of any such cards, however). Please read the file <file:Documentation/sound/oss/OPL3> if your card has an OPL3 chip. If you compile the driver into the kernel, you have to add "opl3=<io>" to the kernel command line. If unsure, say Y. config SOUND_OPL3SA2 tristate "Yamaha OPL3-SA2 and SA3 based PnP cards" depends on SOUND_OSS help Say Y or M if you have a card based on one of these Yamaha sound chipsets or the "SAx", which is actually a SA3. Read <file:Documentation/sound/oss/OPL3-SA2> for more information on configuring these cards. If you compile the driver into the kernel and do not also configure in the optional ISA PnP support, you will have to add "opl3sa2=<io>,<irq>,<dma>,<dma2>,<mssio>,<mpuio>" to the kernel command line. config SOUND_UART6850 tristate "6850 UART support" depends on SOUND_OSS help This option enables support for MIDI interfaces based on the 6850 UART chip. This interface is rarely found on sound cards. It's safe to answer N to this question. If you compile the driver into the kernel, you have to add "uart6850=<io>,<irq>" to the kernel command line. config SOUND_AEDSP16 tristate "Gallant Audio Cards (SC-6000 and SC-6600 based)" depends on SOUND_OSS ---help--- Answer Y if you have a Gallant's Audio Excel DSP 16 card. This driver supports Audio Excel DSP 16 but not the III nor PnP versions of this card. The Gallant's Audio Excel DSP 16 card can emulate either an SBPro or a Microsoft Sound System card, so you should have said Y to either "100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support" or "Microsoft Sound System support", above, and you need to answer the "MSS emulation" and "SBPro emulation" questions below accordingly. You should say Y to one and only one of these two questions. Read the <file:Documentation/sound/oss/README.OSS> file and the head of <file:drivers/sound/aedsp16.c> as well as <file:Documentation/sound/oss/AudioExcelDSP16> to get more information about this driver and its configuration. config SC6600 bool "SC-6600 based audio cards (new Audio Excel DSP 16)" depends on SOUND_AEDSP16 help The SC6600 is the new version of DSP mounted on the Audio Excel DSP 16 cards. Find in the manual the FCC ID of your audio card and answer Y if you have an SC6600 DSP. config SC6600_JOY bool "Activate SC-6600 Joystick Interface" depends on SC6600 help Say Y here in order to use the joystick interface of the Audio Excel DSP 16 card. config SC6600_CDROM int "SC-6600 CDROM Interface (4=None, 3=IDE, 1=Panasonic, 0=?Sony?)" depends on SC6600 default "4" help This is used to activate the CD-ROM interface of the Audio Excel DSP 16 card. Enter: 0 for Sony, 1 for Panasonic, 2 for IDE, 4 for no CD-ROM present. config SC6600_CDROMBASE hex "SC-6600 CDROM Interface I/O Address" depends on SC6600 default "0" help Base I/O port address for the CD-ROM interface of the Audio Excel DSP 16 card. choice prompt "Audio Excel DSP 16" optional depends on SOUND_AEDSP16 config AEDSP16_MSS bool "MSS emulation" depends on SOUND_MSS help Answer Y if you want your audio card to emulate Microsoft Sound System. You should then say Y to "Microsoft Sound System support" and say N to "Audio Excel DSP 16 (SBPro emulation)". config AEDSP16_SBPRO bool "SBPro emulation" depends on SOUND_SB help Answer Y if you want your audio card to emulate Sound Blaster Pro. You should then say Y to "100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support" and N to "Audio Excel DSP 16 (MSS emulation)". If you compile the driver into the kernel, you have to add "aedsp16=<io>,<irq>,<dma>,<mssio>,<mpuio>,<mouirq>" to the kernel command line. endchoice config AEDSP16_MPU401 bool "Audio Excel DSP 16 (MPU401 emulation)" depends on SOUND_AEDSP16 && SOUND_MPU401 help Answer Y if you want your audio card to emulate the MPU-401 midi interface. You should then also say Y to "MPU-401 support". Note that the I/O base for MPU-401 support of aedsp16 is the same you have selected for "MPU-401 support". If you are using this driver as a module you have to specify the MPU I/O base address with the parameter 'mpu_base=0xNNN'. config SOUND_VIDC tristate "VIDC 16-bit sound" depends on ARM && (ARCH_ACORN || ARCH_CLPS7500) && SOUND_OSS help 16-bit support for the VIDC onboard sound hardware found on Acorn machines. config SOUND_WAVEARTIST tristate "Netwinder WaveArtist" depends on ARM && SOUND_OSS && ARCH_NETWINDER help Say Y here to include support for the Rockwell WaveArtist sound system. This driver is mainly for the NetWinder. config SOUND_TVMIXER tristate "TV card (bt848) mixer support" depends on SOUND_PRIME && I2C help Support for audio mixer facilities on the BT848 TV frame-grabber card. config SOUND_KAHLUA tristate "XpressAudio Sound Blaster emulation" depends on SOUND_SB config SOUND_SH_DAC_AUDIO tristate "SuperH DAC audio support" depends on SOUND_PRIME && CPU_SH3 config SOUND_SH_DAC_AUDIO_CHANNEL int " DAC channel" default "1" depends on SOUND_SH_DAC_AUDIO