menu "LITMUS^RT" menu "Scheduling" config PLUGIN_CEDF bool "Clustered-EDF" depends on X86 && SYSFS default y help Include the Clustered EDF (C-EDF) plugin in the kernel. This is appropriate for large platforms with shared caches. On smaller platforms (e.g., ARM PB11MPCore), using C-EDF makes little sense since there aren't any shared caches. config PLUGIN_PFAIR bool "PFAIR" depends on HIGH_RES_TIMERS && !NO_HZ default y help Include the PFAIR plugin (i.e., the PD^2 scheduler) in the kernel. The PFAIR plugin requires high resolution timers (for staggered quanta) and does not support NO_HZ (quanta could be missed when the system is idle). If unsure, say Yes. config RELEASE_MASTER bool "Release-master Support" depends on ARCH_HAS_SEND_PULL_TIMERS default n help Allow one processor to act as a dedicated interrupt processor that services all timer interrupts, but that does not schedule real-time tasks. See RTSS'09 paper for details (http://www.cs.unc.edu/~anderson/papers.html). Currently only supported by GSN-EDF. endmenu menu "Real-Time Synchronization" config NP_SECTION bool "Non-preemptive section support" default n help Allow tasks to become non-preemptable. Note that plugins still need to explicitly support non-preemptivity. Currently, only GSN-EDF and PSN-EDF have such support. This is required to support locking protocols such as the FMLP. If disabled, all tasks will be considered preemptable at all times. config LITMUS_LOCKING bool "Support for real-time locking protocols" depends on NP_SECTION default n help Enable LITMUS^RT's deterministic multiprocessor real-time locking protocols. Say Yes if you want to include locking protocols such as the FMLP and Baker's SRP. config LITMUS_AFFINITY_LOCKING bool "Enable affinity infrastructure in k-exclusion locking protocols." depends on LITMUS_LOCKING default n help Enable affinity tracking infrastructure in k-exclusion locking protocols. This only enabled the *infrastructure* not actual affinity algorithms. If unsure, say No. config LITMUS_NESTED_LOCKING bool "Support for nested inheritance in locking protocols" depends on LITMUS_LOCKING default n help Enable nested priority inheritance. config LITMUS_DGL_SUPPORT bool "Support for dynamic group locks" depends on LITMUS_NESTED_LOCKING default n help Enable dynamic group lock support. config LITMUS_MAX_DGL_SIZE int "Maximum size of a dynamic group lock." depends on LITMUS_DGL_SUPPORT range 1 128 default "10" help Dynamic group lock data structures are allocated on the process stack when a group is requested. We set a maximum size of locks in a dynamic group lock to avoid dynamic allocation. TODO: Batch DGL requests exceeding LITMUS_MAX_DGL_SIZE. endmenu menu "Performance Enhancements" config SCHED_CPU_AFFINITY bool "Local Migration Affinity" depends on X86 default y help Rescheduled tasks prefer CPUs near to their previously used CPU. This may improve performance through possible preservation of cache affinity. Warning: May make bugs harder to find since tasks may migrate less often. NOTES: * Feature is not utilized by PFair/PD^2. Say Yes if unsure. endmenu menu "Tracing" config FEATHER_TRACE bool "Feather-Trace Infrastructure" default y help Feather-Trace basic tracing infrastructure. Includes device file driver and instrumentation point support. There are actually two implementations of Feather-Trace. 1) A slower, but portable, default implementation. 2) Architecture-specific implementations that rewrite kernel .text at runtime. If enabled, Feather-Trace will be based on 2) if available (currently only for x86). However, if DEBUG_RODATA=y, then Feather-Trace will choose option 1) in any case to avoid problems with write-protected .text pages. Bottom line: to avoid increased overheads, choose DEBUG_RODATA=n. Note that this option only enables the basic Feather-Trace infrastructure; you still need to enable SCHED_TASK_TRACE and/or SCHED_OVERHEAD_TRACE to actually enable any events. config SCHED_TASK_TRACE bool "Trace real-time tasks" depends on FEATHER_TRACE default y help Include support for the sched_trace_XXX() tracing functions. This allows the collection of real-time task events such as job completions, job releases, early completions, etc. This results in a small overhead in the scheduling code. Disable if the overhead is not acceptable (e.g., benchmarking). Say Yes for debugging. Say No for overhead tracing. config SCHED_TASK_TRACE_SHIFT int "Buffer size for sched_trace_xxx() events" depends on SCHED_TASK_TRACE range 8 15 default 9 help Select the buffer size of sched_trace_xxx() events as a power of two. These buffers are statically allocated as per-CPU data. Each event requires 24 bytes storage plus one additional flag byte. Too large buffers can cause issues with the per-cpu allocator (and waste memory). Too small buffers can cause scheduling events to be lost. The "right" size is workload dependent and depends on the number of tasks, each task's period, each task's number of suspensions, and how often the buffer is flushed. Examples: 12 => 4k events 10 => 1k events 8 => 512 events config SCHED_OVERHEAD_TRACE bool "Record timestamps for overhead measurements" depends on FEATHER_TRACE default n help Export event stream for overhead tracing. Say Yes for overhead tracing. config SCHED_DEBUG_TRACE bool "TRACE() debugging" default y help Include support for sched_trace_log_messageg(), which is used to implement TRACE(). If disabled, no TRACE() messages will be included in the kernel, and no overheads due to debugging statements will be incurred by the scheduler. Disable if the overhead is not acceptable (e.g. benchmarking). Say Yes for debugging. Say No for overhead tracing. config SCHED_DEBUG_TRACE_SHIFT int "Buffer size for TRACE() buffer" depends on SCHED_DEBUG_TRACE range 14 22 default 18 help Select the amount of memory needed per for the TRACE() buffer, as a power of two. The TRACE() buffer is global and statically allocated. If the buffer is too small, there will be holes in the TRACE() log if the buffer-flushing task is starved. The default should be sufficient for most systems. Increase the buffer size if the log contains holes. Reduce the buffer size when running on a memory-constrained system. Examples: 14 => 16KB 18 => 256KB 20 => 1MB This buffer is exported to usespace using a misc device as 'litmus/log'. On a system with default udev rules, a corresponding character device node should be created at /dev/litmus/log. The buffer can be flushed using cat, e.g., 'cat /dev/litmus/log > my_log_file.txt'. config SCHED_DEBUG_TRACE_CALLER bool "Include [function@file:line] tag in TRACE() log" depends on SCHED_DEBUG_TRACE default n help With this option enabled, TRACE() prepends "[@:]" to each message in the debug log. Enable this to aid in figuring out what was called in which order. The downside is that it adds a lot of clutter. If unsure, say No. config PREEMPT_STATE_TRACE bool "Trace preemption state machine transitions" depends on SCHED_DEBUG_TRACE default n help With this option enabled, each CPU will log when it transitions states in the preemption state machine. This state machine is used to determine how to react to IPIs (avoid races with in-flight IPIs). Warning: this creates a lot of information in the debug trace. Only recommended when you are debugging preemption-related races. If unsure, say No. endmenu menu "Interrupt Handling" choice prompt "Scheduling of interrupt bottom-halves in Litmus." default LITMUS_SOFTIRQD_NONE depends on LITMUS_LOCKING && !LITMUS_THREAD_ALL_SOFTIRQ help Schedule tasklets with known priorities in Litmus. config LITMUS_SOFTIRQD_NONE bool "No tasklet scheduling in Litmus." help Don't schedule tasklets in Litmus. Default. config LITMUS_SOFTIRQD bool "Spawn klitirqd interrupt handling threads." help Create klitirqd interrupt handling threads. Work must be specifically dispatched to these workers. (Softirqs for Litmus tasks are not magically redirected to klitirqd.) G-EDF/RM, C-EDF/RM ONLY for now! config LITMUS_PAI_SOFTIRQD bool "Defer tasklets to context switch points." help Only execute scheduled tasklet bottom halves at scheduling points. Trades context switch overhead at the cost of non-preemptive durations of bottom half processing. G-EDF/RM, C-EDF/RM ONLY for now! endchoice config NR_LITMUS_SOFTIRQD int "Number of klitirqd." depends on LITMUS_SOFTIRQD range 1 4096 default "1" help Should be <= to the number of CPUs in your system. config LITMUS_NVIDIA bool "Litmus handling of NVIDIA interrupts." default n help Direct tasklets from NVIDIA devices to Litmus's klitirqd or PAI interrupt handling routines. If unsure, say No. config LITMUS_AFFINITY_AWARE_GPU_ASSINGMENT bool "Enable affinity-aware heuristics to improve GPU assignment." depends on LITMUS_NVIDIA && LITMUS_AFFINITY_LOCKING default n help Enable several heuristics to improve the assignment of GPUs to real-time tasks to reduce the overheads of memory migrations. If unsure, say No. config NV_DEVICE_NUM int "Number of NVIDIA GPUs." depends on LITMUS_SOFTIRQD || LITMUS_PAI_SOFTIRQD range 1 4096 default "1" help Should be (<= to the number of CPUs) and (<= to the number of GPUs) in your system. config NV_MAX_SIMULT_USERS int "Maximum number of threads sharing a GPU simultanously" depends on LITMUS_SOFTIRQD || LITMUS_PAI_SOFTIRQD range 1 3 default "2" help Should be equal to the #copy_engines + #execution_engines of the GPUs in your system. Scientific/Professional GPUs = 3 (ex. M2070, Quadro 6000?) Consumer Fermi/Kepler GPUs = 2 (GTX-4xx thru -6xx) Older = 1 (ex. GTX-2xx) choice prompt "CUDA/Driver Version Support" default CUDA_4_0 depends on LITMUS_NVIDIA help Select the version of CUDA/driver to support. config CUDA_4_0 bool "CUDA 4.0" depends on LITMUS_NVIDIA help Support CUDA 4.0 RC2 (dev. driver version: x86_64-270.40) config CUDA_3_2 bool "CUDA 3.2" depends on LITMUS_NVIDIA help Support CUDA 3.2 (dev. driver version: x86_64-260.24) endchoice endmenu endmenu