/* * PCI HotPlug Core Functions * * Copyright (C) 1995,2001 Compaq Computer Corporation * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) * Copyright (C) 2001 IBM Corp. * * All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or (at * your option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or * NON INFRINGEMENT. See the GNU General Public License for more * details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * * Send feedback to <kristen.c.accardi@intel.com> * */ #ifndef _PCI_HOTPLUG_H #define _PCI_HOTPLUG_H /* These values come from the PCI Hotplug Spec */ enum pci_bus_speed { PCI_SPEED_33MHz = 0x00, PCI_SPEED_66MHz = 0x01, PCI_SPEED_66MHz_PCIX = 0x02, PCI_SPEED_100MHz_PCIX = 0x03, PCI_SPEED_133MHz_PCIX = 0x04, PCI_SPEED_66MHz_PCIX_ECC = 0x05, PCI_SPEED_100MHz_PCIX_ECC = 0x06, PCI_SPEED_133MHz_PCIX_ECC = 0x07, PCI_SPEED_66MHz_PCIX_266 = 0x09, PCI_SPEED_100MHz_PCIX_266 = 0x0a, PCI_SPEED_133MHz_PCIX_266 = 0x0b, PCI_SPEED_66MHz_PCIX_533 = 0x11, PCI_SPEED_100MHz_PCIX_533 = 0x12, PCI_SPEED_133MHz_PCIX_533 = 0x13, PCI_SPEED_UNKNOWN = 0xff, }; /* These values come from the PCI Express Spec */ enum pcie_link_width { PCIE_LNK_WIDTH_RESRV = 0x00, PCIE_LNK_X1 = 0x01, PCIE_LNK_X2 = 0x02, PCIE_LNK_X4 = 0x04, PCIE_LNK_X8 = 0x08, PCIE_LNK_X12 = 0x0C, PCIE_LNK_X16 = 0x10, PCIE_LNK_X32 = 0x20, PCIE_LNK_WIDTH_UNKNOWN = 0xFF, }; enum pcie_link_speed { PCIE_2PT5GB = 0x14, PCIE_LNK_SPEED_UNKNOWN = 0xFF, }; struct hotplug_slot; struct hotplug_slot_attribute { struct attribute attr; ssize_t (*show)(struct hotplug_slot *, char *); ssize_t (*store)(struct hotplug_slot *, const char *, size_t); }; #define to_hotplug_attr(n) container_of(n, struct hotplug_slot_attribute, attr); /** * struct hotplug_slot_ops -the callbacks that the hotplug pci core can use * @owner: The module owner of this structure * @enable_slot: Called when the user wants to enable a specific pci slot * @disable_slot: Called when the user wants to disable a specific pci slot * @set_attention_status: Called to set the specific slot's attention LED to * the specified value * @hardware_test: Called to run a specified hardware test on the specified * slot. * @get_power_status: Called to get the current power status of a slot. * If this field is NULL, the value passed in the struct hotplug_slot_info * will be used when this value is requested by a user. * @get_attention_status: Called to get the current attention status of a slot. * If this field is NULL, the value passed in the struct hotplug_slot_info * will be used when this value is requested by a user. * @get_latch_status: Called to get the current latch status of a slot. * If this field is NULL, the value passed in the struct hotplug_slot_info * will be used when this value is requested by a user. * @get_adapter_status: Called to get see if an adapter is present in the slot or not. * If this field is NULL, the value passed in the struct hotplug_slot_info * will be used when this value is requested by a user. * @get_address: Called to get pci address of a slot. * If this field is NULL, the value passed in the struct hotplug_slot_info * will be used when this value is requested by a user. * @get_max_bus_speed: Called to get the max bus speed for a slot. * If this field is NULL, the value passed in the struct hotplug_slot_info * will be used when this value is requested by a user. * @get_cur_bus_speed: Called to get the current bus speed for a slot. * If this field is NULL, the value passed in the struct hotplug_slot_info * will be used when this value is requested by a user. * * The table of function pointers that is passed to the hotplug pci core by a * hotplug pci driver. These functions are called by the hotplug pci core when * the user wants to do something to a specific slot (query it for information, * set an LED, enable / disable power, etc.) */ struct hotplug_slot_ops { struct module *owner; int (*enable_slot) (struct hotplug_slot *slot); int (*disable_slot) (struct hotplug_slot *slot); int (*set_attention_status) (struct hotplug_slot *slot, u8 value); int (*hardware_test) (struct hotplug_slot *slot, u32 value); int (*get_power_status) (struct hotplug_slot *slot, u8 *value); int (*get_attention_status) (struct hotplug_slot *slot, u8 *value); int (*get_latch_status) (struct hotplug_slot *slot, u8 *value); int (*get_adapter_status) (struct hotplug_slot *slot, u8 *value); int (*get_address) (struct hotplug_slot *slot, u32 *value); int (*get_max_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value); int (*get_cur_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value); }; /** * struct hotplug_slot_info - used to notify the hotplug pci core of the state of the slot * @power: if power is enabled or not (1/0) * @attention_status: if the attention light is enabled or not (1/0) * @latch_status: if the latch (if any) is open or closed (1/0) * @adapter_present: if there is a pci board present in the slot or not (1/0) * @address: (domain << 16 | bus << 8 | dev) * * Used to notify the hotplug pci core of the status of a specific slot. */ struct hotplug_slot_info { u8 power_status; u8 attention_status; u8 latch_status; u8 adapter_status; u32 address; enum pci_bus_speed max_bus_speed; enum pci_bus_speed cur_bus_speed; }; /** * struct hotplug_slot - used to register a physical slot with the hotplug pci core * @name: the name of the slot being registered. This string must * be unique amoung slots registered on this system. * @ops: pointer to the &struct hotplug_slot_ops to be used for this slot * @info: pointer to the &struct hotplug_slot_info for the initial values for * this slot. * @release: called during pci_hp_deregister to free memory allocated in a * hotplug_slot structure. * @private: used by the hotplug pci controller driver to store whatever it * needs. */ struct hotplug_slot { char *name; struct hotplug_slot_ops *ops; struct hotplug_slot_info *info; void (*release) (struct hotplug_slot *slot); void *private; /* Variables below this are for use only by the hotplug pci core. */ struct list_head slot_list; struct kobject kobj; }; #define to_hotplug_slot(n) container_of(n, struct hotplug_slot, kobj) extern int pci_hp_register (struct hotplug_slot *slot); extern int pci_hp_deregister (struct hotplug_slot *slot); extern int __must_check pci_hp_change_slot_info (struct hotplug_slot *slot, struct hotplug_slot_info *info); extern struct kset pci_hotplug_slots_subsys; /* PCI Setting Record (Type 0) */ struct hpp_type0 { u32 revision; u8 cache_line_size; u8 latency_timer; u8 enable_serr; u8 enable_perr; }; /* PCI-X Setting Record (Type 1) */ struct hpp_type1 { u32 revision; u8 max_mem_read; u8 avg_max_split; u16 tot_max_split; }; /* PCI Express Setting Record (Type 2) */ struct hpp_type2 { u32 revision; u32 unc_err_mask_and; u32 unc_err_mask_or; u32 unc_err_sever_and; u32 unc_err_sever_or; u32 cor_err_mask_and; u32 cor_err_mask_or; u32 adv_err_cap_and; u32 adv_err_cap_or; u16 pci_exp_devctl_and; u16 pci_exp_devctl_or; u16 pci_exp_lnkctl_and; u16 pci_exp_lnkctl_or; u32 sec_unc_err_sever_and; u32 sec_unc_err_sever_or; u32 sec_unc_err_mask_and; u32 sec_unc_err_mask_or; }; struct hotplug_params { struct hpp_type0 *t0; /* Type0: NULL if not available */ struct hpp_type1 *t1; /* Type1: NULL if not available */ struct hpp_type2 *t2; /* Type2: NULL if not available */ struct hpp_type0 type0_data; struct hpp_type1 type1_data; struct hpp_type2 type2_data; }; #ifdef CONFIG_ACPI #include <acpi/acpi.h> #include <acpi/acpi_bus.h> #include <acpi/actypes.h> extern acpi_status acpi_run_oshp(acpi_handle handle); extern acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus, struct hotplug_params *hpp); int acpi_root_bridge(acpi_handle handle); #endif #endif