/* * linux/include/asm-arm/arch-sa1100/assabet.h * * Created 2000/06/05 by Nicolas Pitre <nico@cam.org> * * This file contains the hardware specific definitions for Assabet * Only include this file from SA1100-specific files. * * 2000/05/23 John Dorsey <john+@cs.cmu.edu> * Definitions for Neponset added. */ #ifndef __ASM_ARCH_ASSABET_H #define __ASM_ARCH_ASSABET_H /* System Configuration Register flags */ #define ASSABET_SCR_SDRAM_LOW (1<<2) /* SDRAM size (low bit) */ #define ASSABET_SCR_SDRAM_HIGH (1<<3) /* SDRAM size (high bit) */ #define ASSABET_SCR_FLASH_LOW (1<<4) /* Flash size (low bit) */ #define ASSABET_SCR_FLASH_HIGH (1<<5) /* Flash size (high bit) */ #define ASSABET_SCR_GFX (1<<8) /* Graphics Accelerator (0 = present) */ #define ASSABET_SCR_SA1111 (1<<9) /* Neponset (0 = present) */ #define ASSABET_SCR_INIT -1 extern unsigned long SCR_value; #ifdef CONFIG_ASSABET_NEPONSET #define machine_has_neponset() ((SCR_value & ASSABET_SCR_SA1111) == 0) #else #define machine_has_neponset() (0) #endif /* Board Control Register */ #define ASSABET_BCR_BASE 0xf1000000 #define ASSABET_BCR (*(volatile unsigned int *)(ASSABET_BCR_BASE)) #define ASSABET_BCR_CF_PWR (1<<0) /* Compact Flash Power (1 = 3.3v, 0 = off) */ #define ASSABET_BCR_CF_RST (1<<1) /* Compact Flash Reset (1 = power up reset) */ #define ASSABET_BCR_GFX_RST (1<<1) /* Graphics Accelerator Reset (0 = hold reset) */ #define ASSABET_BCR_CODEC_RST (1<<2) /* 0 = Holds UCB1300, ADI7171, and UDA1341 in reset */ #define ASSABET_BCR_IRDA_FSEL (1<<3) /* IRDA Frequency select (0 = SIR, 1 = MIR/ FIR) */ #define ASSABET_BCR_IRDA_MD0 (1<<4) /* Range/Power select */ #define ASSABET_BCR_IRDA_MD1 (1<<5) /* Range/Power select */ #define ASSABET_BCR_STEREO_LB (1<<6) /* Stereo Loopback */ #define ASSABET_BCR_CF_BUS_OFF (1<<7) /* Compact Flash bus (0 = on, 1 = off (float)) */ #define ASSABET_BCR_AUDIO_ON (1<<8) /* Audio power on */ #define ASSABET_BCR_LIGHT_ON (1<<9) /* Backlight */ #define ASSABET_BCR_LCD_12RGB (1<<10) /* 0 = 16RGB, 1 = 12RGB */ #define ASSABET_BCR_LCD_ON (1<<11) /* LCD power on */ #define ASSABET_BCR_RS232EN (1<<12) /* RS232 transceiver enable */ #define ASSABET_BCR_LED_RED (1<<13) /* D9 (0 = on, 1 = off) */ #define ASSABET_BCR_LED_GREEN (1<<14) /* D8 (0 = on, 1 = off) */ #define ASSABET_BCR_VIB_ON (1<<15) /* Vibration motor (quiet alert) */ #define ASSABET_BCR_COM_DTR (1<<16) /* COMport Data Terminal Ready */ #define ASSABET_BCR_COM_RTS (1<<17) /* COMport Request To Send */ #define ASSABET_BCR_RAD_WU (1<<18) /* Radio wake up interrupt */ #define ASSABET_BCR_SMB_EN (1<<19) /* System management bus enable */ #define ASSABET_BCR_TV_IR_DEC (1<<20) /* TV IR Decode Enable (not implemented) */ #define ASSABET_BCR_QMUTE (1<<21) /* Quick Mute */ #define ASSABET_BCR_RAD_ON (1<<22) /* Radio Power On */ #define ASSABET_BCR_SPK_OFF (1<<23) /* 1 = Speaker amplifier power off */ #ifdef CONFIG_SA1100_ASSABET extern void ASSABET_BCR_frob(unsigned int mask, unsigned int set); #else #define ASSABET_BCR_frob(x,y) do { } while (0) #endif #define ASSABET_BCR_set(x) ASSABET_BCR_frob((x), (x)) #define ASSABET_BCR_clear(x) ASSABET_BCR_frob((x), 0) #define ASSABET_BSR_BASE 0xf1000000 #define ASSABET_BSR (*(volatile unsigned int*)(ASSABET_BSR_BASE)) #define ASSABET_BSR_RS232_VALID (1 << 24) #define ASSABET_BSR_COM_DCD (1 << 25) #define ASSABET_BSR_COM_CTS (1 << 26) #define ASSABET_BSR_COM_DSR (1 << 27) #define ASSABET_BSR_RAD_CTS (1 << 28) #define ASSABET_BSR_RAD_DSR (1 << 29) #define ASSABET_BSR_RAD_DCD (1 << 30) #define ASSABET_BSR_RAD_RI (1 << 31) /* GPIOs for which the generic definition doesn't say much */ #define ASSABET_GPIO_RADIO_IRQ GPIO_GPIO (14) /* Radio interrupt request */ #define ASSABET_GPIO_PS_MODE_SYNC GPIO_GPIO (16) /* Power supply mode/sync */ #define ASSABET_GPIO_STEREO_64FS_CLK GPIO_GPIO (19) /* SSP UDA1341 clock input */ #define ASSABET_GPIO_CF_IRQ GPIO_GPIO (21) /* CF IRQ */ #define ASSABET_GPIO_CF_CD GPIO_GPIO (22) /* CF CD */ #define ASSABET_GPIO_CF_BVD2 GPIO_GPIO (24) /* CF BVD */ #define ASSABET_GPIO_GFX_IRQ GPIO_GPIO (24) /* Graphics IRQ */ #define ASSABET_GPIO_CF_BVD1 GPIO_GPIO (25) /* CF BVD */ #define ASSABET_GPIO_BATT_LOW GPIO_GPIO (26) /* Low battery */ #define ASSABET_GPIO_RCLK GPIO_GPIO (26) /* CCLK/2 */ #define ASSABET_IRQ_GPIO_CF_IRQ IRQ_GPIO21 #define ASSABET_IRQ_GPIO_CF_CD IRQ_GPIO22 #define ASSABET_IRQ_GPIO_CF_BVD2 IRQ_GPIO24 #define ASSABET_IRQ_GPIO_CF_BVD1 IRQ_GPIO25 #endif