/* * Permedia2 framebuffer driver. * * 2.5/2.6 driver: * Copyright (c) 2003 Jim Hague (jim.hague@acm.org) * * based on 2.4 driver: * Copyright (c) 1998-2000 Ilario Nardinocchi (nardinoc@CS.UniBO.IT) * Copyright (c) 1999 Jakub Jelinek (jakub@redhat.com) * * and additional input from James Simmon's port of Hannu Mallat's tdfx * driver. * * I have a Creative Graphics Blaster Exxtreme card - pm2fb on x86. I * have no access to other pm2fb implementations. Sparc (and thus * hopefully other big-endian) devices now work, thanks to a lot of * testing work by Ron Murray. I have no access to CVision hardware, * and therefore for now I am omitting the CVision code. * * Multiple boards support has been on the TODO list for ages. * Don't expect this to change. * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive for * more details. * * */ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/kernel.h> #include <linux/errno.h> #include <linux/string.h> #include <linux/mm.h> #include <linux/slab.h> #include <linux/delay.h> #include <linux/fb.h> #include <linux/init.h> #include <linux/pci.h> #ifdef CONFIG_MTRR #include <asm/mtrr.h> #endif #include <video/permedia2.h> #include <video/cvisionppc.h> #if !defined(__LITTLE_ENDIAN) && !defined(__BIG_ENDIAN) #error "The endianness of the target host has not been defined." #endif #if !defined(CONFIG_PCI) #error "Only generic PCI cards supported." #endif #undef PM2FB_MASTER_DEBUG #ifdef PM2FB_MASTER_DEBUG #define DPRINTK(a, b...) \ printk(KERN_DEBUG "pm2fb: %s: " a, __func__ , ## b) #else #define DPRINTK(a, b...) #endif #define PM2_PIXMAP_SIZE (1600 * 4) /* * Driver data */ static int hwcursor = 1; static char *mode_option __devinitdata; /* * The XFree GLINT driver will (I think to implement hardware cursor * support on TVP4010 and similar where there is no RAMDAC - see * comment in set_video) always request +ve sync regardless of what * the mode requires. This screws me because I have a Sun * fixed-frequency monitor which absolutely has to have -ve sync. So * these flags allow the user to specify that requests for +ve sync * should be silently turned in -ve sync. */ static int lowhsync; static int lowvsync; static int noaccel __devinitdata; /* mtrr option */ #ifdef CONFIG_MTRR static int nomtrr __devinitdata; #endif /* * The hardware state of the graphics card that isn't part of the * screeninfo. */ struct pm2fb_par { pm2type_t type; /* Board type */ unsigned char __iomem *v_regs;/* virtual address of p_regs */ u32 memclock; /* memclock */ u32 video; /* video flags before blanking */ u32 mem_config; /* MemConfig reg at probe */ u32 mem_control; /* MemControl reg at probe */ u32 boot_address; /* BootAddress reg at probe */ u32 palette[16]; int mtrr_handle; }; /* * Here we define the default structs fb_fix_screeninfo and fb_var_screeninfo * if we don't use modedb. */ static struct fb_fix_screeninfo pm2fb_fix __devinitdata = { .id = "", .type = FB_TYPE_PACKED_PIXELS, .visual = FB_VISUAL_PSEUDOCOLOR, .xpanstep = 1, .ypanstep = 1, .ywrapstep = 0, .accel = FB_ACCEL_3DLABS_PERMEDIA2, }; /* * Default video mode. In case the modedb doesn't work. */ static struct fb_var_screeninfo pm2fb_var __devinitdata = { /* "640x480, 8 bpp @ 60 Hz */ .xres = 640, .yres = 480, .xres_virtual = 640, .yres_virtual = 480, .bits_per_pixel = 8, .red = {0, 8, 0}, .blue = {0, 8, 0}, .green = {0, 8, 0}, .activate = FB_ACTIVATE_NOW, .height = -1, .width = -1, .accel_flags = 0, .pixclock = 39721, .left_margin = 40, .right_margin = 24, .upper_margin = 32, .lower_margin = 11, .hsync_len = 96, .vsync_len = 2, .vmode = FB_VMODE_NONINTERLACED }; /* * Utility functions */ static inline u32 pm2_RD(struct pm2fb_par *p, s32 off) { return fb_readl(p->v_regs + off); } static inline void pm2_WR(struct pm2fb_par *p, s32 off, u32 v) { fb_writel(v, p->v_regs + off); } static inline u32 pm2_RDAC_RD(struct pm2fb_par *p, s32 idx) { pm2_WR(p, PM2R_RD_PALETTE_WRITE_ADDRESS, idx); mb(); return pm2_RD(p, PM2R_RD_INDEXED_DATA); } static inline u32 pm2v_RDAC_RD(struct pm2fb_par *p, s32 idx) { pm2_WR(p, PM2VR_RD_INDEX_LOW, idx & 0xff); mb(); return pm2_RD(p, PM2VR_RD_INDEXED_DATA); } static inline void pm2_RDAC_WR(struct pm2fb_par *p, s32 idx, u32 v) { pm2_WR(p, PM2R_RD_PALETTE_WRITE_ADDRESS, idx); wmb(); pm2_WR(p, PM2R_RD_INDEXED_DATA, v); wmb(); } static inline void pm2v_RDAC_WR(struct pm2fb_par *p, s32 idx, u32 v) { pm2_WR(p, PM2VR_RD_INDEX_LOW, idx & 0xff); wmb(); pm2_WR(p, PM2VR_RD_INDEXED_DATA, v); wmb(); } #ifdef CONFIG_FB_PM2_FIFO_DISCONNECT #define WAIT_FIFO(p, a) #else static inline void WAIT_FIFO(struct pm2fb_par *p, u32 a) { while (pm2_RD(p, PM2R_IN_FIFO_SPACE) < a) cpu_relax(); } #endif /* * partial products for the supported horizontal resolutions. */ #define PACKPP(p0, p1, p2) (((p2) << 6) | ((p1) << 3) | (p0)) static const struct { u16 width; u16 pp; } pp_table[] = { { 32, PACKPP(1, 0, 0) }, { 64, PACKPP(1, 1, 0) }, { 96, PACKPP(1, 1, 1) }, { 128, PACKPP(2, 1, 1) }, { 160, PACKPP(2, 2, 1) }, { 192, PACKPP(2, 2, 2) }, { 224, PACKPP(3, 2, 1) }, { 256, PACKPP(3, 2, 2) }, { 288, PACKPP(3, 3, 1) }, { 320, PACKPP(3, 3, 2) }, { 384, PACKPP(3, 3, 3) }, { 416, PACKPP(4, 3, 1) }, { 448, PACKPP(4, 3, 2) }, { 512, PACKPP(4, 3, 3) }, { 544, PACKPP(4, 4, 1) }, { 576, PACKPP(4, 4, 2) }, { 640, PACKPP(4, 4, 3) }, { 768, PACKPP(4, 4, 4) }, { 800, PACKPP(5, 4, 1) }, { 832, PACKPP(5, 4, 2) }, { 896, PACKPP(5, 4, 3) }, { 1024, PACKPP(5, 4, 4) }, { 1056, PACKPP(5, 5, 1) }, { 1088, PACKPP(5, 5, 2) }, { 1152, PACKPP(5, 5, 3) }, { 1280, PACKPP(5, 5, 4) }, { 1536, PACKPP(5, 5, 5) }, { 1568, PACKPP(6, 5, 1) }, { 1600, PACKPP(6, 5, 2) }, { 1664, PACKPP(6, 5, 3) }, { 1792, PACKPP(6, 5, 4) }, { 2048, PACKPP(6, 5, 5) }, { 0, 0 } }; static u32 partprod(u32 xres) { int i; for (i = 0; pp_table[i].width && pp_table[i].width != xres; i++) ; if (pp_table[i].width == 0) DPRINTK("invalid width %u\n", xres); return pp_table[i].pp; } static u32 to3264(u32 timing, int bpp, int is64) { switch (bpp) { case 24: timing *= 3; case 8: timing >>= 1; case 16: timing >>= 1; case 32: break; } if (is64) timing >>= 1; return timing; } static void pm2_mnp(u32 clk, unsigned char *mm, unsigned char *nn, unsigned char *pp) { unsigned char m; unsigned char n; unsigned char p; u32 f; s32 curr; s32 delta = 100000; *mm = *nn = *pp = 0; for (n = 2; n < 15; n++) { for (m = 2; m; m++) { f = PM2_REFERENCE_CLOCK * m / n; if (f >= 150000 && f <= 300000) { for (p = 0; p < 5; p++, f >>= 1) { curr = (clk > f) ? clk - f : f - clk; if (curr < delta) { delta = curr; *mm = m; *nn = n; *pp = p; } } } } } } static void pm2v_mnp(u32 clk, unsigned char *mm, unsigned char *nn, unsigned char *pp) { unsigned char m; unsigned char n; unsigned char p; u32 f; s32 delta = 1000; *mm = *nn = *pp = 0; for (m = 1; m < 128; m++) { for (n = 2 * m + 1; n; n++) { for (p = 0; p < 2; p++) { f = (PM2_REFERENCE_CLOCK >> (p + 1)) * n / m; if (clk > f - delta && clk < f + delta) { delta = (clk > f) ? clk - f : f - clk; *mm = m; *nn = n; *pp = p; } } } } } static void clear_palette(struct pm2fb_par *p) { int i = 256; WAIT_FIFO(p, 1); pm2_WR(p, PM2R_RD_PALETTE_WRITE_ADDRESS, 0); wmb(); while (i--) { WAIT_FIFO(p, 3); pm2_WR(p, PM2R_RD_PALETTE_DATA, 0); pm2_WR(p, PM2R_RD_PALETTE_DATA, 0); pm2_WR(p, PM2R_RD_PALETTE_DATA, 0); } } static void reset_card(struct pm2fb_par *p) { if (p->type == PM2_TYPE_PERMEDIA2V) pm2_WR(p, PM2VR_RD_INDEX_HIGH, 0); pm2_WR(p, PM2R_RESET_STATUS, 0); mb(); while (pm2_RD(p, PM2R_RESET_STATUS) & PM2F_BEING_RESET) cpu_relax(); mb(); #ifdef CONFIG_FB_PM2_FIFO_DISCONNECT DPRINTK("FIFO disconnect enabled\n"); pm2_WR(p, PM2R_FIFO_DISCON, 1); mb(); #endif /* Restore stashed memory config information from probe */ WAIT_FIFO(p, 3); pm2_WR(p, PM2R_MEM_CONTROL, p->mem_control); pm2_WR(p, PM2R_BOOT_ADDRESS, p->boot_address); wmb(); pm2_WR(p, PM2R_MEM_CONFIG, p->mem_config); } static void reset_config(struct pm2fb_par *p) { WAIT_FIFO(p, 53); pm2_WR(p, PM2R_CHIP_CONFIG, pm2_RD(p, PM2R_CHIP_CONFIG) & ~(PM2F_VGA_ENABLE | PM2F_VGA_FIXED)); pm2_WR(p, PM2R_BYPASS_WRITE_MASK, ~(0L)); pm2_WR(p, PM2R_FRAMEBUFFER_WRITE_MASK, ~(0L)); pm2_WR(p, PM2R_FIFO_CONTROL, 0); pm2_WR(p, PM2R_APERTURE_ONE, 0); pm2_WR(p, PM2R_APERTURE_TWO, 0); pm2_WR(p, PM2R_RASTERIZER_MODE, 0); pm2_WR(p, PM2R_DELTA_MODE, PM2F_DELTA_ORDER_RGB); pm2_WR(p, PM2R_LB_READ_FORMAT, 0); pm2_WR(p, PM2R_LB_WRITE_FORMAT, 0); pm2_WR(p, PM2R_LB_READ_MODE, 0); pm2_WR(p, PM2R_LB_SOURCE_OFFSET, 0); pm2_WR(p, PM2R_FB_SOURCE_OFFSET, 0); pm2_WR(p, PM2R_FB_PIXEL_OFFSET, 0); pm2_WR(p, PM2R_FB_WINDOW_BASE, 0); pm2_WR(p, PM2R_LB_WINDOW_BASE, 0); pm2_WR(p, PM2R_FB_SOFT_WRITE_MASK, ~(0L)); pm2_WR(p, PM2R_FB_HARD_WRITE_MASK, ~(0L)); pm2_WR(p, PM2R_FB_READ_PIXEL, 0); pm2_WR(p, PM2R_DITHER_MODE, 0); pm2_WR(p, PM2R_AREA_STIPPLE_MODE, 0); pm2_WR(p, PM2R_DEPTH_MODE, 0); pm2_WR(p, PM2R_STENCIL_MODE, 0); pm2_WR(p, PM2R_TEXTURE_ADDRESS_MODE, 0); pm2_WR(p, PM2R_TEXTURE_READ_MODE, 0); pm2_WR(p, PM2R_TEXEL_LUT_MODE, 0); pm2_WR(p, PM2R_YUV_MODE, 0); pm2_WR(p, PM2R_COLOR_DDA_MODE, 0); pm2_WR(p, PM2R_TEXTURE_COLOR_MODE, 0); pm2_WR(p, PM2R_FOG_MODE, 0); pm2_WR(p, PM2R_ALPHA_BLEND_MODE, 0); pm2_WR(p, PM2R_LOGICAL_OP_MODE, 0); pm2_WR(p, PM2R_STATISTICS_MODE, 0); pm2_WR(p, PM2R_SCISSOR_MODE, 0); pm2_WR(p, PM2R_FILTER_MODE, PM2F_SYNCHRONIZATION); pm2_WR(p, PM2R_RD_PIXEL_MASK, 0xff); switch (p->type) { case PM2_TYPE_PERMEDIA2: pm2_RDAC_WR(p, PM2I_RD_MODE_CONTROL, 0); /* no overlay */ pm2_RDAC_WR(p, PM2I_RD_CURSOR_CONTROL, 0); pm2_RDAC_WR(p, PM2I_RD_MISC_CONTROL, PM2F_RD_PALETTE_WIDTH_8); pm2_RDAC_WR(p, PM2I_RD_COLOR_KEY_CONTROL, 0); pm2_RDAC_WR(p, PM2I_RD_OVERLAY_KEY, 0); pm2_RDAC_WR(p, PM2I_RD_RED_KEY, 0); pm2_RDAC_WR(p, PM2I_RD_GREEN_KEY, 0); pm2_RDAC_WR(p, PM2I_RD_BLUE_KEY, 0); break; case PM2_TYPE_PERMEDIA2V: pm2v_RDAC_WR(p, PM2VI_RD_MISC_CONTROL, 1); /* 8bit */ break; } } static void set_aperture(struct pm2fb_par *p, u32 depth) { /* * The hardware is little-endian. When used in big-endian * hosts, the on-chip aperture settings are used where * possible to translate from host to card byte order. */ WAIT_FIFO(p, 2); #ifdef __LITTLE_ENDIAN pm2_WR(p, PM2R_APERTURE_ONE, PM2F_APERTURE_STANDARD); #else switch (depth) { case 24: /* RGB->BGR */ /* * We can't use the aperture to translate host to * card byte order here, so we switch to BGR mode * in pm2fb_set_par(). */ case 8: /* B->B */ pm2_WR(p, PM2R_APERTURE_ONE, PM2F_APERTURE_STANDARD); break; case 16: /* HL->LH */ pm2_WR(p, PM2R_APERTURE_ONE, PM2F_APERTURE_HALFWORDSWAP); break; case 32: /* RGBA->ABGR */ pm2_WR(p, PM2R_APERTURE_ONE, PM2F_APERTURE_BYTESWAP); break; } #endif /* We don't use aperture two, so this may be superflous */ pm2_WR(p, PM2R_APERTURE_TWO, PM2F_APERTURE_STANDARD); } static void set_color(struct pm2fb_par *p, unsigned char regno, unsigned char r, unsigned char g, unsigned char b) { WAIT_FIFO(p, 4); pm2_WR(p, PM2R_RD_PALETTE_WRITE_ADDRESS, regno); wmb(); pm2_WR(p, PM2R_RD_PALETTE_DATA, r); wmb(); pm2_WR(p, PM2R_RD_PALETTE_DATA, g); wmb(); pm2_WR(p, PM2R_RD_PALETTE_DATA, b); } static void set_memclock(struct pm2fb_par *par, u32 clk) { int i; unsigned char m, n, p; switch (par->type) { case PM2_TYPE_PERMEDIA2V: pm2v_mnp(clk/2, &m, &n, &p); WAIT_FIFO(par, 12); pm2_WR(par, PM2VR_RD_INDEX_HIGH, PM2VI_RD_MCLK_CONTROL >> 8); pm2v_RDAC_WR(par, PM2VI_RD_MCLK_CONTROL, 0); pm2v_RDAC_WR(par, PM2VI_RD_MCLK_PRESCALE, m); pm2v_RDAC_WR(par, PM2VI_RD_MCLK_FEEDBACK, n); pm2v_RDAC_WR(par, PM2VI_RD_MCLK_POSTSCALE, p); pm2v_RDAC_WR(par, PM2VI_RD_MCLK_CONTROL, 1); rmb(); for (i = 256; i; i--) if (pm2v_RDAC_RD(par, PM2VI_RD_MCLK_CONTROL) & 2) break; pm2_WR(par, PM2VR_RD_INDEX_HIGH, 0); break; case PM2_TYPE_PERMEDIA2: pm2_mnp(clk, &m, &n, &p); WAIT_FIFO(par, 10); pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_3, 6); pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_1, m); pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_2, n); pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_3, 8|p); pm2_RDAC_RD(par, PM2I_RD_MEMORY_CLOCK_STATUS); rmb(); for (i = 256; i; i--) if (pm2_RD(par, PM2R_RD_INDEXED_DATA) & PM2F_PLL_LOCKED) break; break; } } static void set_pixclock(struct pm2fb_par *par, u32 clk) { int i; unsigned char m, n, p; switch (par->type) { case PM2_TYPE_PERMEDIA2: pm2_mnp(clk, &m, &n, &p); WAIT_FIFO(par, 10); pm2_RDAC_WR(par, PM2I_RD_PIXEL_CLOCK_A3, 0); pm2_RDAC_WR(par, PM2I_RD_PIXEL_CLOCK_A1, m); pm2_RDAC_WR(par, PM2I_RD_PIXEL_CLOCK_A2, n); pm2_RDAC_WR(par, PM2I_RD_PIXEL_CLOCK_A3, 8|p); pm2_RDAC_RD(par, PM2I_RD_PIXEL_CLOCK_STATUS); rmb(); for (i = 256; i; i--) if (pm2_RD(par, PM2R_RD_INDEXED_DATA) & PM2F_PLL_LOCKED) break; break; case PM2_TYPE_PERMEDIA2V: pm2v_mnp(clk/2, &m, &n, &p); WAIT_FIFO(par, 8); pm2_WR(par, PM2VR_RD_INDEX_HIGH, PM2VI_RD_CLK0_PRESCALE >> 8); pm2v_RDAC_WR(par, PM2VI_RD_CLK0_PRESCALE, m); pm2v_RDAC_WR(par, PM2VI_RD_CLK0_FEEDBACK, n); pm2v_RDAC_WR(par, PM2VI_RD_CLK0_POSTSCALE, p); pm2_WR(par, PM2VR_RD_INDEX_HIGH, 0); break; } } static void set_video(struct pm2fb_par *p, u32 video) { u32 tmp; u32 vsync = video; DPRINTK("video = 0x%x\n", video); /* * The hardware cursor needs +vsync to recognise vert retrace. * We may not be using the hardware cursor, but the X Glint * driver may well. So always set +hsync/+vsync and then set * the RAMDAC to invert the sync if necessary. */ vsync &= ~(PM2F_HSYNC_MASK | PM2F_VSYNC_MASK); vsync |= PM2F_HSYNC_ACT_HIGH | PM2F_VSYNC_ACT_HIGH; WAIT_FIFO(p, 3); pm2_WR(p, PM2R_VIDEO_CONTROL, vsync); switch (p->type) { case PM2_TYPE_PERMEDIA2: tmp = PM2F_RD_PALETTE_WIDTH_8; if ((video & PM2F_HSYNC_MASK) == PM2F_HSYNC_ACT_LOW) tmp |= 4; /* invert hsync */ if ((video & PM2F_VSYNC_MASK) == PM2F_VSYNC_ACT_LOW) tmp |= 8; /* invert vsync */ pm2_RDAC_WR(p, PM2I_RD_MISC_CONTROL, tmp); break; case PM2_TYPE_PERMEDIA2V: tmp = 0; if ((video & PM2F_HSYNC_MASK) == PM2F_HSYNC_ACT_LOW) tmp |= 1; /* invert hsync */ if ((video & PM2F_VSYNC_MASK) == PM2F_VSYNC_ACT_LOW) tmp |= 4; /* invert vsync */ pm2v_RDAC_WR(p, PM2VI_RD_SYNC_CONTROL, tmp); break; } } /* * pm2fb_check_var - Optional function. Validates a var passed in. * @var: frame buffer variable screen structure * @info: frame buffer structure that represents a single frame buffer * * Checks to see if the hardware supports the state requested by * var passed in. * * Returns negative errno on error, or zero on success. */ static int pm2fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) { u32 lpitch; if (var->bits_per_pixel != 8 && var->bits_per_pixel != 16 && var->bits_per_pixel != 24 && var->bits_per_pixel != 32) { DPRINTK("depth not supported: %u\n", var->bits_per_pixel); return -EINVAL; } if (var->xres != var->xres_virtual) { DPRINTK("virtual x resolution != " "physical x resolution not supported\n"); return -EINVAL; } if (var->yres > var->yres_virtual) { DPRINTK("virtual y resolution < " "physical y resolution not possible\n"); return -EINVAL; } /* permedia cannot blit over 2048 */ if (var->yres_virtual > 2047) { var->yres_virtual = 2047; } if (var->xoffset) { DPRINTK("xoffset not supported\n"); return -EINVAL; } if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) { DPRINTK("interlace not supported\n"); return -EINVAL; } var->xres = (var->xres + 15) & ~15; /* could sometimes be 8 */ lpitch = var->xres * ((var->bits_per_pixel + 7) >> 3); if (var->xres < 320 || var->xres > 1600) { DPRINTK("width not supported: %u\n", var->xres); return -EINVAL; } if (var->yres < 200 || var->yres > 1200) { DPRINTK("height not supported: %u\n", var->yres); return -EINVAL; } if (lpitch * var->yres_virtual > info->fix.smem_len) { DPRINTK("no memory for screen (%ux%ux%u)\n", var->xres, var->yres_virtual, var->bits_per_pixel); return -EINVAL; } if (PICOS2KHZ(var->pixclock) > PM2_MAX_PIXCLOCK) { DPRINTK("pixclock too high (%ldKHz)\n", PICOS2KHZ(var->pixclock)); return -EINVAL; } var->transp.offset = 0; var->transp.length = 0; switch (var->bits_per_pixel) { case 8: var->red.length = 8; var->green.length = 8; var->blue.length = 8; break; case 16: var->red.offset = 11; var->red.length = 5; var->green.offset = 5; var->green.length = 6; var->blue.offset = 0; var->blue.length = 5; break; case 32: var->transp.offset = 24; var->transp.length = 8; var->red.offset = 16; var->green.offset = 8; var->blue.offset = 0; var->red.length = 8; var->green.length = 8; var->blue.length = 8; break; case 24: #ifdef __BIG_ENDIAN var->red.offset = 0; var->blue.offset = 16; #else var->red.offset = 16; var->blue.offset = 0; #endif var->green.offset = 8; var->red.length = 8; var->green.length = 8; var->blue.length = 8; break; } var->height = -1; var->width = -1; var->accel_flags = 0; /* Can't mmap if this is on */ DPRINTK("Checking graphics mode at %dx%d depth %d\n", var->xres, var->yres, var->bits_per_pixel); return 0; } /** * pm2fb_set_par - Alters the hardware state. * @info: frame buffer structure that represents a single frame buffer * * Using the fb_var_screeninfo in fb_info we set the resolution of the * this particular framebuffer. */ static int pm2fb_set_par(struct fb_info *info) { struct pm2fb_par *par = info->par; u32 pixclock; u32 width = (info->var.xres_virtual + 7) & ~7; u32 height = info->var.yres_virtual; u32 depth = (info->var.bits_per_pixel + 7) & ~7; u32 hsstart, hsend, hbend, htotal; u32 vsstart, vsend, vbend, vtotal; u32 stride; u32 base; u32 video = 0; u32 clrmode = PM2F_RD_COLOR_MODE_RGB | PM2F_RD_GUI_ACTIVE; u32 txtmap = 0; u32 pixsize = 0; u32 clrformat = 0; u32 misc = 1; /* 8-bit DAC */ u32 xres = (info->var.xres + 31) & ~31; int data64; reset_card(par); reset_config(par); clear_palette(par); if (par->memclock) set_memclock(par, par->memclock); depth = (depth > 32) ? 32 : depth; data64 = depth > 8 || par->type == PM2_TYPE_PERMEDIA2V; pixclock = PICOS2KHZ(info->var.pixclock); if (pixclock > PM2_MAX_PIXCLOCK) { DPRINTK("pixclock too high (%uKHz)\n", pixclock); return -EINVAL; } hsstart = to3264(info->var.right_margin, depth, data64); hsend = hsstart + to3264(info->var.hsync_len, depth, data64); hbend = hsend + to3264(info->var.left_margin, depth, data64); htotal = to3264(xres, depth, data64) + hbend - 1; vsstart = (info->var.lower_margin) ? info->var.lower_margin - 1 : 0; /* FIXME! */ vsend = info->var.lower_margin + info->var.vsync_len - 1; vbend = info->var.lower_margin + info->var.vsync_len + info->var.upper_margin; vtotal = info->var.yres + vbend - 1; stride = to3264(width, depth, 1); base = to3264(info->var.yoffset * xres + info->var.xoffset, depth, 1); if (data64) video |= PM2F_DATA_64_ENABLE; if (info->var.sync & FB_SYNC_HOR_HIGH_ACT) { if (lowhsync) { DPRINTK("ignoring +hsync, using -hsync.\n"); video |= PM2F_HSYNC_ACT_LOW; } else video |= PM2F_HSYNC_ACT_HIGH; } else video |= PM2F_HSYNC_ACT_LOW; if (info->var.sync & FB_SYNC_VERT_HIGH_ACT) { if (lowvsync) { DPRINTK("ignoring +vsync, using -vsync.\n"); video |= PM2F_VSYNC_ACT_LOW; } else video |= PM2F_VSYNC_ACT_HIGH; } else video |= PM2F_VSYNC_ACT_LOW; if ((info->var.vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) { DPRINTK("interlaced not supported\n"); return -EINVAL; } if ((info->var.vmode & FB_VMODE_MASK) == FB_VMODE_DOUBLE) video |= PM2F_LINE_DOUBLE; if ((info->var.activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW) video |= PM2F_VIDEO_ENABLE; par->video = video; info->fix.visual = (depth == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; info->fix.line_length = info->var.xres * depth / 8; info->cmap.len = 256; /* * Settings calculated. Now write them out. */ if (par->type == PM2_TYPE_PERMEDIA2V) { WAIT_FIFO(par, 1); pm2_WR(par, PM2VR_RD_INDEX_HIGH, 0); } set_aperture(par, depth); mb(); WAIT_FIFO(par, 19); switch (depth) { case 8: pm2_WR(par, PM2R_FB_READ_PIXEL, 0); clrformat = 0x2e; break; case 16: pm2_WR(par, PM2R_FB_READ_PIXEL, 1); clrmode |= PM2F_RD_TRUECOLOR | PM2F_RD_PIXELFORMAT_RGB565; txtmap = PM2F_TEXTEL_SIZE_16; pixsize = 1; clrformat = 0x70; misc |= 8; break; case 32: pm2_WR(par, PM2R_FB_READ_PIXEL, 2); clrmode |= PM2F_RD_TRUECOLOR | PM2F_RD_PIXELFORMAT_RGBA8888; txtmap = PM2F_TEXTEL_SIZE_32; pixsize = 2; clrformat = 0x20; misc |= 8; break; case 24: pm2_WR(par, PM2R_FB_READ_PIXEL, 4); clrmode |= PM2F_RD_TRUECOLOR | PM2F_RD_PIXELFORMAT_RGB888; txtmap = PM2F_TEXTEL_SIZE_24; pixsize = 4; clrformat = 0x20; misc |= 8; break; } pm2_WR(par, PM2R_FB_WRITE_MODE, PM2F_FB_WRITE_ENABLE); pm2_WR(par, PM2R_FB_READ_MODE, partprod(xres)); pm2_WR(par, PM2R_LB_READ_MODE, partprod(xres)); pm2_WR(par, PM2R_TEXTURE_MAP_FORMAT, txtmap | partprod(xres)); pm2_WR(par, PM2R_H_TOTAL, htotal); pm2_WR(par, PM2R_HS_START, hsstart); pm2_WR(par, PM2R_HS_END, hsend); pm2_WR(par, PM2R_HG_END, hbend); pm2_WR(par, PM2R_HB_END, hbend); pm2_WR(par, PM2R_V_TOTAL, vtotal); pm2_WR(par, PM2R_VS_START, vsstart); pm2_WR(par, PM2R_VS_END, vsend); pm2_WR(par, PM2R_VB_END, vbend); pm2_WR(par, PM2R_SCREEN_STRIDE, stride); wmb(); pm2_WR(par, PM2R_WINDOW_ORIGIN, 0); pm2_WR(par, PM2R_SCREEN_SIZE, (height << 16) | width); pm2_WR(par, PM2R_SCISSOR_MODE, PM2F_SCREEN_SCISSOR_ENABLE); wmb(); pm2_WR(par, PM2R_SCREEN_BASE, base); wmb(); set_video(par, video); WAIT_FIFO(par, 10); switch (par->type) { case PM2_TYPE_PERMEDIA2: pm2_RDAC_WR(par, PM2I_RD_COLOR_MODE, clrmode); pm2_RDAC_WR(par, PM2I_RD_COLOR_KEY_CONTROL, (depth == 8) ? 0 : PM2F_COLOR_KEY_TEST_OFF); break; case PM2_TYPE_PERMEDIA2V: pm2v_RDAC_WR(par, PM2VI_RD_DAC_CONTROL, 0); pm2v_RDAC_WR(par, PM2VI_RD_PIXEL_SIZE, pixsize); pm2v_RDAC_WR(par, PM2VI_RD_COLOR_FORMAT, clrformat); pm2v_RDAC_WR(par, PM2VI_RD_MISC_CONTROL, misc); pm2v_RDAC_WR(par, PM2VI_RD_OVERLAY_KEY, 0); break; } set_pixclock(par, pixclock); DPRINTK("Setting graphics mode at %dx%d depth %d\n", info->var.xres, info->var.yres, info->var.bits_per_pixel); return 0; } /** * pm2fb_setcolreg - Sets a color register. * @regno: boolean, 0 copy local, 1 get_user() function * @red: frame buffer colormap structure * @green: The green value which can be up to 16 bits wide * @blue: The blue value which can be up to 16 bits wide. * @transp: If supported the alpha value which can be up to 16 bits wide. * @info: frame buffer info structure * * Set a single color register. The values supplied have a 16 bit * magnitude which needs to be scaled in this function for the hardware. * Pretty much a direct lift from tdfxfb.c. * * Returns negative errno on error, or zero on success. */ static int pm2fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *info) { struct pm2fb_par *par = info->par; if (regno >= info->cmap.len) /* no. of hw registers */ return -EINVAL; /* * Program hardware... do anything you want with transp */ /* grayscale works only partially under directcolor */ /* grayscale = 0.30*R + 0.59*G + 0.11*B */ if (info->var.grayscale) red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8; /* Directcolor: * var->{color}.offset contains start of bitfield * var->{color}.length contains length of bitfield * {hardwarespecific} contains width of DAC * cmap[X] is programmed to * (X << red.offset) | (X << green.offset) | (X << blue.offset) * RAMDAC[X] is programmed to (red, green, blue) * * Pseudocolor: * uses offset = 0 && length = DAC register width. * var->{color}.offset is 0 * var->{color}.length contains width of DAC * cmap is not used * DAC[X] is programmed to (red, green, blue) * Truecolor: * does not use RAMDAC (usually has 3 of them). * var->{color}.offset contains start of bitfield * var->{color}.length contains length of bitfield * cmap is programmed to * (red << red.offset) | (green << green.offset) | * (blue << blue.offset) | (transp << transp.offset) * RAMDAC does not exist */ #define CNVT_TOHW(val, width) ((((val) << (width)) + 0x7FFF -(val)) >> 16) switch (info->fix.visual) { case FB_VISUAL_TRUECOLOR: case FB_VISUAL_PSEUDOCOLOR: red = CNVT_TOHW(red, info->var.red.length); green = CNVT_TOHW(green, info->var.green.length); blue = CNVT_TOHW(blue, info->var.blue.length); transp = CNVT_TOHW(transp, info->var.transp.length); break; case FB_VISUAL_DIRECTCOLOR: /* example here assumes 8 bit DAC. Might be different * for your hardware */ red = CNVT_TOHW(red, 8); green = CNVT_TOHW(green, 8); blue = CNVT_TOHW(blue, 8); /* hey, there is bug in transp handling... */ transp = CNVT_TOHW(transp, 8); break; } #undef CNVT_TOHW /* Truecolor has hardware independent palette */ if (info->fix.visual == FB_VISUAL_TRUECOLOR) { u32 v; if (regno >= 16) return -EINVAL; v = (red << info->var.red.offset) | (green << info->var.green.offset) | (blue << info->var.blue.offset) | (transp << info->var.transp.offset); switch (info->var.bits_per_pixel) { case 8: break; case 16: case 24: case 32: par->palette[regno] = v; break; } return 0; } else if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR) set_color(par, regno, red, green, blue); return 0; } /** * pm2fb_pan_display - Pans the display. * @var: frame buffer variable screen structure * @info: frame buffer structure that represents a single frame buffer * * Pan (or wrap, depending on the `vmode' field) the display using the * `xoffset' and `yoffset' fields of the `var' structure. * If the values don't fit, return -EINVAL. * * Returns negative errno on error, or zero on success. * */ static int pm2fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) { struct pm2fb_par *p = info->par; u32 base; u32 depth = (var->bits_per_pixel + 7) & ~7; u32 xres = (var->xres + 31) & ~31; depth = (depth > 32) ? 32 : depth; base = to3264(var->yoffset * xres + var->xoffset, depth, 1); WAIT_FIFO(p, 1); pm2_WR(p, PM2R_SCREEN_BASE, base); return 0; } /** * pm2fb_blank - Blanks the display. * @blank_mode: the blank mode we want. * @info: frame buffer structure that represents a single frame buffer * * Blank the screen if blank_mode != 0, else unblank. Return 0 if * blanking succeeded, != 0 if un-/blanking failed due to e.g. a * video mode which doesn't support it. Implements VESA suspend * and powerdown modes on hardware that supports disabling hsync/vsync: * blank_mode == 2: suspend vsync * blank_mode == 3: suspend hsync * blank_mode == 4: powerdown * * Returns negative errno on error, or zero on success. * */ static int pm2fb_blank(int blank_mode, struct fb_info *info) { struct pm2fb_par *par = info->par; u32 video = par->video; DPRINTK("blank_mode %d\n", blank_mode); switch (blank_mode) { case FB_BLANK_UNBLANK: /* Screen: On */ video |= PM2F_VIDEO_ENABLE; break; case FB_BLANK_NORMAL: /* Screen: Off */ video &= ~PM2F_VIDEO_ENABLE; break; case FB_BLANK_VSYNC_SUSPEND: /* VSync: Off */ video &= ~(PM2F_VSYNC_MASK | PM2F_BLANK_LOW); break; case FB_BLANK_HSYNC_SUSPEND: /* HSync: Off */ video &= ~(PM2F_HSYNC_MASK | PM2F_BLANK_LOW); break; case FB_BLANK_POWERDOWN: /* HSync: Off, VSync: Off */ video &= ~(PM2F_VSYNC_MASK | PM2F_HSYNC_MASK | PM2F_BLANK_LOW); break; } set_video(par, video); return 0; } static int pm2fb_sync(struct fb_info *info) { struct pm2fb_par *par = info->par; WAIT_FIFO(par, 1); pm2_WR(par, PM2R_SYNC, 0); mb(); do { while (pm2_RD(par, PM2R_OUT_FIFO_WORDS) == 0) cpu_relax(); } while (pm2_RD(par, PM2R_OUT_FIFO) != PM2TAG(PM2R_SYNC)); return 0; } static void pm2fb_fillrect(struct fb_info *info, const struct fb_fillrect *region) { struct pm2fb_par *par = info->par; struct fb_fillrect modded; int vxres, vyres; u32 color = (info->fix.visual == FB_VISUAL_TRUECOLOR) ? ((u32 *)info->pseudo_palette)[region->color] : region->color; if (info->state != FBINFO_STATE_RUNNING) return; if ((info->flags & FBINFO_HWACCEL_DISABLED) || region->rop != ROP_COPY ) { cfb_fillrect(info, region); return; } vxres = info->var.xres_virtual; vyres = info->var.yres_virtual; memcpy(&modded, region, sizeof(struct fb_fillrect)); if (!modded.width || !modded.height || modded.dx >= vxres || modded.dy >= vyres) return; if (modded.dx + modded.width > vxres) modded.width = vxres - modded.dx; if (modded.dy + modded.height > vyres) modded.height = vyres - modded.dy; if (info->var.bits_per_pixel == 8) color |= color << 8; if (info->var.bits_per_pixel <= 16) color |= color << 16; WAIT_FIFO(par, 3); pm2_WR(par, PM2R_CONFIG, PM2F_CONFIG_FB_WRITE_ENABLE); pm2_WR(par, PM2R_RECTANGLE_ORIGIN, (modded.dy << 16) | modded.dx); pm2_WR(par, PM2R_RECTANGLE_SIZE, (modded.height << 16) | modded.width); if (info->var.bits_per_pixel != 24) { WAIT_FIFO(par, 2); pm2_WR(par, PM2R_FB_BLOCK_COLOR, color); wmb(); pm2_WR(par, PM2R_RENDER, PM2F_RENDER_RECTANGLE | PM2F_RENDER_FASTFILL); } else { WAIT_FIFO(par, 4); pm2_WR(par, PM2R_COLOR_DDA_MODE, 1); pm2_WR(par, PM2R_CONSTANT_COLOR, color); wmb(); pm2_WR(par, PM2R_RENDER, PM2F_RENDER_RECTANGLE | PM2F_INCREASE_X | PM2F_INCREASE_Y ); pm2_WR(par, PM2R_COLOR_DDA_MODE, 0); } } static void pm2fb_copyarea(struct fb_info *info, const struct fb_copyarea *area) { struct pm2fb_par *par = info->par; struct fb_copyarea modded; u32 vxres, vyres; if (info->state != FBINFO_STATE_RUNNING) return; if (info->flags & FBINFO_HWACCEL_DISABLED) { cfb_copyarea(info, area); return; } memcpy(&modded, area, sizeof(struct fb_copyarea)); vxres = info->var.xres_virtual; vyres = info->var.yres_virtual; if (!modded.width || !modded.height || modded.sx >= vxres || modded.sy >= vyres || modded.dx >= vxres || modded.dy >= vyres) return; if (modded.sx + modded.width > vxres) modded.width = vxres - modded.sx; if (modded.dx + modded.width > vxres) modded.width = vxres - modded.dx; if (modded.sy + modded.height > vyres) modded.height = vyres - modded.sy; if (modded.dy + modded.height > vyres) modded.height = vyres - modded.dy; WAIT_FIFO(par, 5); pm2_WR(par, PM2R_CONFIG, PM2F_CONFIG_FB_WRITE_ENABLE | PM2F_CONFIG_FB_READ_SOURCE_ENABLE); pm2_WR(par, PM2R_FB_SOURCE_DELTA, ((modded.sy - modded.dy) & 0xfff) << 16 | ((modded.sx - modded.dx) & 0xfff)); pm2_WR(par, PM2R_RECTANGLE_ORIGIN, (modded.dy << 16) | modded.dx); pm2_WR(par, PM2R_RECTANGLE_SIZE, (modded.height << 16) | modded.width); wmb(); pm2_WR(par, PM2R_RENDER, PM2F_RENDER_RECTANGLE | (modded.dx < modded.sx ? PM2F_INCREASE_X : 0) | (modded.dy < modded.sy ? PM2F_INCREASE_Y : 0)); } static void pm2fb_imageblit(struct fb_info *info, const struct fb_image *image) { struct pm2fb_par *par = info->par; u32 height = image->height; u32 fgx, bgx; const u32 *src = (const u32 *)image->data; u32 xres = (info->var.xres + 31) & ~31; int raster_mode = 1; /* invert bits */ #ifdef __LITTLE_ENDIAN raster_mode |= 3 << 7; /* reverse byte order */ #endif if (info->state != FBINFO_STATE_RUNNING) return; if (info->flags & FBINFO_HWACCEL_DISABLED || image->depth != 1) { cfb_imageblit(info, image); return; } switch (info->fix.visual) { case FB_VISUAL_PSEUDOCOLOR: fgx = image->fg_color; bgx = image->bg_color; break; case FB_VISUAL_TRUECOLOR: default: fgx = par->palette[image->fg_color]; bgx = par->palette[image->bg_color]; break; } if (info->var.bits_per_pixel == 8) { fgx |= fgx << 8; bgx |= bgx << 8; } if (info->var.bits_per_pixel <= 16) { fgx |= fgx << 16; bgx |= bgx << 16; } WAIT_FIFO(par, 13); pm2_WR(par, PM2R_FB_READ_MODE, partprod(xres)); pm2_WR(par, PM2R_SCISSOR_MIN_XY, ((image->dy & 0xfff) << 16) | (image->dx & 0x0fff)); pm2_WR(par, PM2R_SCISSOR_MAX_XY, (((image->dy + image->height) & 0x0fff) << 16) | ((image->dx + image->width) & 0x0fff)); pm2_WR(par, PM2R_SCISSOR_MODE, 1); /* GXcopy & UNIT_ENABLE */ pm2_WR(par, PM2R_LOGICAL_OP_MODE, (0x3 << 1) | 1); pm2_WR(par, PM2R_RECTANGLE_ORIGIN, ((image->dy & 0xfff) << 16) | (image->dx & 0x0fff)); pm2_WR(par, PM2R_RECTANGLE_SIZE, ((image->height & 0x0fff) << 16) | ((image->width) & 0x0fff)); if (info->var.bits_per_pixel == 24) { pm2_WR(par, PM2R_COLOR_DDA_MODE, 1); /* clear area */ pm2_WR(par, PM2R_CONSTANT_COLOR, bgx); pm2_WR(par, PM2R_RENDER, PM2F_RENDER_RECTANGLE | PM2F_INCREASE_X | PM2F_INCREASE_Y); /* BitMapPackEachScanline */ pm2_WR(par, PM2R_RASTERIZER_MODE, raster_mode | (1 << 9)); pm2_WR(par, PM2R_CONSTANT_COLOR, fgx); pm2_WR(par, PM2R_RENDER, PM2F_RENDER_RECTANGLE | PM2F_INCREASE_X | PM2F_INCREASE_Y | PM2F_RENDER_SYNC_ON_BIT_MASK); } else { pm2_WR(par, PM2R_COLOR_DDA_MODE, 0); /* clear area */ pm2_WR(par, PM2R_FB_BLOCK_COLOR, bgx); pm2_WR(par, PM2R_RENDER, PM2F_RENDER_RECTANGLE | PM2F_RENDER_FASTFILL | PM2F_INCREASE_X | PM2F_INCREASE_Y); pm2_WR(par, PM2R_RASTERIZER_MODE, raster_mode); pm2_WR(par, PM2R_FB_BLOCK_COLOR, fgx); pm2_WR(par, PM2R_RENDER, PM2F_RENDER_RECTANGLE | PM2F_INCREASE_X | PM2F_INCREASE_Y | PM2F_RENDER_FASTFILL | PM2F_RENDER_SYNC_ON_BIT_MASK); } while (height--) { int width = ((image->width + 7) >> 3) + info->pixmap.scan_align - 1; width >>= 2; WAIT_FIFO(par, width); while (width--) { pm2_WR(par, PM2R_BIT_MASK_PATTERN, *src); src++; } } WAIT_FIFO(par, 3); pm2_WR(par, PM2R_RASTERIZER_MODE, 0); pm2_WR(par, PM2R_COLOR_DDA_MODE, 0); pm2_WR(par, PM2R_SCISSOR_MODE, 0); } /* * Hardware cursor support. */ static const u8 cursor_bits_lookup[16] = { 0x00, 0x40, 0x10, 0x50, 0x04, 0x44, 0x14, 0x54, 0x01, 0x41, 0x11, 0x51, 0x05, 0x45, 0x15, 0x55 }; static int pm2vfb_cursor(struct fb_info *info, struct fb_cursor *cursor) { struct pm2fb_par *par = info->par; u8 mode = PM2F_CURSORMODE_TYPE_X; int x = cursor->image.dx - info->var.xoffset; int y = cursor->image.dy - info->var.yoffset; if (cursor->enable) mode |= PM2F_CURSORMODE_CURSOR_ENABLE; pm2v_RDAC_WR(par, PM2VI_RD_CURSOR_MODE, mode); if (!cursor->enable) x = 2047; /* push it outside display */ pm2v_RDAC_WR(par, PM2VI_RD_CURSOR_X_LOW, x & 0xff); pm2v_RDAC_WR(par, PM2VI_RD_CURSOR_X_HIGH, (x >> 8) & 0xf); pm2v_RDAC_WR(par, PM2VI_RD_CURSOR_Y_LOW, y & 0xff); pm2v_RDAC_WR(par, PM2VI_RD_CURSOR_Y_HIGH, (y >> 8) & 0xf); /* * If the cursor is not be changed this means either we want the * current cursor state (if enable is set) or we want to query what * we can do with the cursor (if enable is not set) */ if (!cursor->set) return 0; if (cursor->set & FB_CUR_SETHOT) { pm2v_RDAC_WR(par, PM2VI_RD_CURSOR_X_HOT, cursor->hot.x & 0x3f); pm2v_RDAC_WR(par, PM2VI_RD_CURSOR_Y_HOT, cursor->hot.y & 0x3f); } if (cursor->set & FB_CUR_SETCMAP) { u32 fg_idx = cursor->image.fg_color; u32 bg_idx = cursor->image.bg_color; struct fb_cmap cmap = info->cmap; /* the X11 driver says one should use these color registers */ pm2_WR(par, PM2VR_RD_INDEX_HIGH, PM2VI_RD_CURSOR_PALETTE >> 8); pm2v_RDAC_WR(par, PM2VI_RD_CURSOR_PALETTE + 0, cmap.red[bg_idx] >> 8 ); pm2v_RDAC_WR(par, PM2VI_RD_CURSOR_PALETTE + 1, cmap.green[bg_idx] >> 8 ); pm2v_RDAC_WR(par, PM2VI_RD_CURSOR_PALETTE + 2, cmap.blue[bg_idx] >> 8 ); pm2v_RDAC_WR(par, PM2VI_RD_CURSOR_PALETTE + 3, cmap.red[fg_idx] >> 8 ); pm2v_RDAC_WR(par, PM2VI_RD_CURSOR_PALETTE + 4, cmap.green[fg_idx] >> 8 ); pm2v_RDAC_WR(par, PM2VI_RD_CURSOR_PALETTE + 5, cmap.blue[fg_idx] >> 8 ); pm2_WR(par, PM2VR_RD_INDEX_HIGH, 0); } if (cursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETIMAGE)) { u8 *bitmap = (u8 *)cursor->image.data; u8 *mask = (u8 *)cursor->mask; int i; int pos = PM2VI_RD_CURSOR_PATTERN; for (i = 0; i < cursor->image.height; i++) { int j = (cursor->image.width + 7) >> 3; int k = 8 - j; pm2_WR(par, PM2VR_RD_INDEX_HIGH, pos >> 8); for (; j > 0; j--) { u8 data = *bitmap ^ *mask; if (cursor->rop == ROP_COPY) data = *mask & *bitmap; /* Upper 4 bits of bitmap data */ pm2v_RDAC_WR(par, pos++, cursor_bits_lookup[data >> 4] | (cursor_bits_lookup[*mask >> 4] << 1)); /* Lower 4 bits of bitmap */ pm2v_RDAC_WR(par, pos++, cursor_bits_lookup[data & 0xf] | (cursor_bits_lookup[*mask & 0xf] << 1)); bitmap++; mask++; } for (; k > 0; k--) { pm2v_RDAC_WR(par, pos++, 0); pm2v_RDAC_WR(par, pos++, 0); } } while (pos < (1024 + PM2VI_RD_CURSOR_PATTERN)) { pm2_WR(par, PM2VR_RD_INDEX_HIGH, pos >> 8); pm2v_RDAC_WR(par, pos++, 0); } pm2_WR(par, PM2VR_RD_INDEX_HIGH, 0); } return 0; } static int pm2fb_cursor(struct fb_info *info, struct fb_cursor *cursor) { struct pm2fb_par *par = info->par; u8 mode; if (!hwcursor) return -EINVAL; /* just to force soft_cursor() call */ /* Too large of a cursor or wrong bpp :-( */ if (cursor->image.width > 64 || cursor->image.height > 64 || cursor->image.depth > 1) return -EINVAL; if (par->type == PM2_TYPE_PERMEDIA2V) return pm2vfb_cursor(info, cursor); mode = 0x40; if (cursor->enable) mode = 0x43; pm2_RDAC_WR(par, PM2I_RD_CURSOR_CONTROL, mode); /* * If the cursor is not be changed this means either we want the * current cursor state (if enable is set) or we want to query what * we can do with the cursor (if enable is not set) */ if (!cursor->set) return 0; if (cursor->set & FB_CUR_SETPOS) { int x = cursor->image.dx - info->var.xoffset + 63; int y = cursor->image.dy - info->var.yoffset + 63; WAIT_FIFO(par, 4); pm2_WR(par, PM2R_RD_CURSOR_X_LSB, x & 0xff); pm2_WR(par, PM2R_RD_CURSOR_X_MSB, (x >> 8) & 0x7); pm2_WR(par, PM2R_RD_CURSOR_Y_LSB, y & 0xff); pm2_WR(par, PM2R_RD_CURSOR_Y_MSB, (y >> 8) & 0x7); } if (cursor->set & FB_CUR_SETCMAP) { u32 fg_idx = cursor->image.fg_color; u32 bg_idx = cursor->image.bg_color; WAIT_FIFO(par, 7); pm2_WR(par, PM2R_RD_CURSOR_COLOR_ADDRESS, 1); pm2_WR(par, PM2R_RD_CURSOR_COLOR_DATA, info->cmap.red[bg_idx] >> 8); pm2_WR(par, PM2R_RD_CURSOR_COLOR_DATA, info->cmap.green[bg_idx] >> 8); pm2_WR(par, PM2R_RD_CURSOR_COLOR_DATA, info->cmap.blue[bg_idx] >> 8); pm2_WR(par, PM2R_RD_CURSOR_COLOR_DATA, info->cmap.red[fg_idx] >> 8); pm2_WR(par, PM2R_RD_CURSOR_COLOR_DATA, info->cmap.green[fg_idx] >> 8); pm2_WR(par, PM2R_RD_CURSOR_COLOR_DATA, info->cmap.blue[fg_idx] >> 8); } if (cursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETIMAGE)) { u8 *bitmap = (u8 *)cursor->image.data; u8 *mask = (u8 *)cursor->mask; int i; WAIT_FIFO(par, 1); pm2_WR(par, PM2R_RD_PALETTE_WRITE_ADDRESS, 0); for (i = 0; i < cursor->image.height; i++) { int j = (cursor->image.width + 7) >> 3; int k = 8 - j; WAIT_FIFO(par, 8); for (; j > 0; j--) { u8 data = *bitmap ^ *mask; if (cursor->rop == ROP_COPY) data = *mask & *bitmap; /* bitmap data */ pm2_WR(par, PM2R_RD_CURSOR_DATA, data); bitmap++; mask++; } for (; k > 0; k--) pm2_WR(par, PM2R_RD_CURSOR_DATA, 0); } for (; i < 64; i++) { int j = 8; WAIT_FIFO(par, 8); while (j-- > 0) pm2_WR(par, PM2R_RD_CURSOR_DATA, 0); } mask = (u8 *)cursor->mask; for (i = 0; i < cursor->image.height; i++) { int j = (cursor->image.width + 7) >> 3; int k = 8 - j; WAIT_FIFO(par, 8); for (; j > 0; j--) { /* mask */ pm2_WR(par, PM2R_RD_CURSOR_DATA, *mask); mask++; } for (; k > 0; k--) pm2_WR(par, PM2R_RD_CURSOR_DATA, 0); } for (; i < 64; i++) { int j = 8; WAIT_FIFO(par, 8); while (j-- > 0) pm2_WR(par, PM2R_RD_CURSOR_DATA, 0); } } return 0; } /* ------------ Hardware Independent Functions ------------ */ /* * Frame buffer operations */ static struct fb_ops pm2fb_ops = { .owner = THIS_MODULE, .fb_check_var = pm2fb_check_var, .fb_set_par = pm2fb_set_par, .fb_setcolreg = pm2fb_setcolreg, .fb_blank = pm2fb_blank, .fb_pan_display = pm2fb_pan_display, .fb_fillrect = pm2fb_fillrect, .fb_copyarea = pm2fb_copyarea, .fb_imageblit = pm2fb_imageblit, .fb_sync = pm2fb_sync, .fb_cursor = pm2fb_cursor, }; /* * PCI stuff */ /** * Device initialisation * * Initialise and allocate resource for PCI device. * * @param pdev PCI device. * @param id PCI device ID. */ static int __devinit pm2fb_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct pm2fb_par *default_par; struct fb_info *info; int err; int retval = -ENXIO; err = pci_enable_device(pdev); if (err) { printk(KERN_WARNING "pm2fb: Can't enable pdev: %d\n", err); return err; } info = framebuffer_alloc(sizeof(struct pm2fb_par), &pdev->dev); if (!info) return -ENOMEM; default_par = info->par; switch (pdev->device) { case PCI_DEVICE_ID_TI_TVP4020: strcpy(pm2fb_fix.id, "TVP4020"); default_par->type = PM2_TYPE_PERMEDIA2; break; case PCI_DEVICE_ID_3DLABS_PERMEDIA2: strcpy(pm2fb_fix.id, "Permedia2"); default_par->type = PM2_TYPE_PERMEDIA2; break; case PCI_DEVICE_ID_3DLABS_PERMEDIA2V: strcpy(pm2fb_fix.id, "Permedia2v"); default_par->type = PM2_TYPE_PERMEDIA2V; break; } pm2fb_fix.mmio_start = pci_resource_start(pdev, 0); pm2fb_fix.mmio_len = PM2_REGS_SIZE; #if defined(__BIG_ENDIAN) /* * PM2 has a 64k register file, mapped twice in 128k. Lower * map is little-endian, upper map is big-endian. */ pm2fb_fix.mmio_start += PM2_REGS_SIZE; DPRINTK("Adjusting register base for big-endian.\n"); #endif DPRINTK("Register base at 0x%lx\n", pm2fb_fix.mmio_start); /* Registers - request region and map it. */ if (!request_mem_region(pm2fb_fix.mmio_start, pm2fb_fix.mmio_len, "pm2fb regbase")) { printk(KERN_WARNING "pm2fb: Can't reserve regbase.\n"); goto err_exit_neither; } default_par->v_regs = ioremap_nocache(pm2fb_fix.mmio_start, pm2fb_fix.mmio_len); if (!default_par->v_regs) { printk(KERN_WARNING "pm2fb: Can't remap %s register area.\n", pm2fb_fix.id); release_mem_region(pm2fb_fix.mmio_start, pm2fb_fix.mmio_len); goto err_exit_neither; } /* Stash away memory register info for use when we reset the board */ default_par->mem_control = pm2_RD(default_par, PM2R_MEM_CONTROL); default_par->boot_address = pm2_RD(default_par, PM2R_BOOT_ADDRESS); default_par->mem_config = pm2_RD(default_par, PM2R_MEM_CONFIG); DPRINTK("MemControl 0x%x BootAddress 0x%x MemConfig 0x%x\n", default_par->mem_control, default_par->boot_address, default_par->mem_config); if (default_par->mem_control == 0 && default_par->boot_address == 0x31 && default_par->mem_config == 0x259fffff) { default_par->memclock = CVPPC_MEMCLOCK; default_par->mem_control = 0; default_par->boot_address = 0x20; default_par->mem_config = 0xe6002021; if (pdev->subsystem_vendor == 0x1048 && pdev->subsystem_device == 0x0a31) { DPRINTK("subsystem_vendor: %04x, " "subsystem_device: %04x\n", pdev->subsystem_vendor, pdev->subsystem_device); DPRINTK("We have not been initialized by VGA BIOS and " "are running on an Elsa Winner 2000 Office\n"); DPRINTK("Initializing card timings manually...\n"); default_par->memclock = 100000; } if (pdev->subsystem_vendor == 0x3d3d && pdev->subsystem_device == 0x0100) { DPRINTK("subsystem_vendor: %04x, " "subsystem_device: %04x\n", pdev->subsystem_vendor, pdev->subsystem_device); DPRINTK("We have not been initialized by VGA BIOS and " "are running on an 3dlabs reference board\n"); DPRINTK("Initializing card timings manually...\n"); default_par->memclock = 74894; } } /* Now work out how big lfb is going to be. */ switch (default_par->mem_config & PM2F_MEM_CONFIG_RAM_MASK) { case PM2F_MEM_BANKS_1: pm2fb_fix.smem_len = 0x200000; break; case PM2F_MEM_BANKS_2: pm2fb_fix.smem_len = 0x400000; break; case PM2F_MEM_BANKS_3: pm2fb_fix.smem_len = 0x600000; break; case PM2F_MEM_BANKS_4: pm2fb_fix.smem_len = 0x800000; break; } pm2fb_fix.smem_start = pci_resource_start(pdev, 1); /* Linear frame buffer - request region and map it. */ if (!request_mem_region(pm2fb_fix.smem_start, pm2fb_fix.smem_len, "pm2fb smem")) { printk(KERN_WARNING "pm2fb: Can't reserve smem.\n"); goto err_exit_mmio; } info->screen_base = ioremap_nocache(pm2fb_fix.smem_start, pm2fb_fix.smem_len); if (!info->screen_base) { printk(KERN_WARNING "pm2fb: Can't ioremap smem area.\n"); release_mem_region(pm2fb_fix.smem_start, pm2fb_fix.smem_len); goto err_exit_mmio; } #ifdef CONFIG_MTRR default_par->mtrr_handle = -1; if (!nomtrr) default_par->mtrr_handle = mtrr_add(pm2fb_fix.smem_start, pm2fb_fix.smem_len, MTRR_TYPE_WRCOMB, 1); #endif info->fbops = &pm2fb_ops; info->fix = pm2fb_fix; info->pseudo_palette = default_par->palette; info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN | FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_IMAGEBLIT | FBINFO_HWACCEL_FILLRECT; info->pixmap.addr = kmalloc(PM2_PIXMAP_SIZE, GFP_KERNEL); if (!info->pixmap.addr) { retval = -ENOMEM; goto err_exit_pixmap; } info->pixmap.size = PM2_PIXMAP_SIZE; info->pixmap.buf_align = 4; info->pixmap.scan_align = 4; info->pixmap.access_align = 32; info->pixmap.flags = FB_PIXMAP_SYSTEM; if (noaccel) { printk(KERN_DEBUG "disabling acceleration\n"); info->flags |= FBINFO_HWACCEL_DISABLED; info->pixmap.scan_align = 1; } if (!mode_option) mode_option = "640x480@60"; err = fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 8); if (!err || err == 4) info->var = pm2fb_var; retval = fb_alloc_cmap(&info->cmap, 256, 0); if (retval < 0) goto err_exit_both; retval = register_framebuffer(info); if (retval < 0) goto err_exit_all; printk(KERN_INFO "fb%d: %s frame buffer device, memory = %dK.\n", info->node, info->fix.id, pm2fb_fix.smem_len / 1024); /* * Our driver data */ pci_set_drvdata(pdev, info); return 0; err_exit_all: fb_dealloc_cmap(&info->cmap); err_exit_both: kfree(info->pixmap.addr); err_exit_pixmap: iounmap(info->screen_base); release_mem_region(pm2fb_fix.smem_start, pm2fb_fix.smem_len); err_exit_mmio: iounmap(default_par->v_regs); release_mem_region(pm2fb_fix.mmio_start, pm2fb_fix.mmio_len); err_exit_neither: framebuffer_release(info); return retval; } /** * Device removal. * * Release all device resources. * * @param pdev PCI device to clean up. */ static void __devexit pm2fb_remove(struct pci_dev *pdev) { struct fb_info *info = pci_get_drvdata(pdev); struct fb_fix_screeninfo *fix = &info->fix; struct pm2fb_par *par = info->par; unregister_framebuffer(info); #ifdef CONFIG_MTRR if (par->mtrr_handle >= 0) mtrr_del(par->mtrr_handle, info->fix.smem_start, info->fix.smem_len); #endif /* CONFIG_MTRR */ iounmap(info->screen_base); release_mem_region(fix->smem_start, fix->smem_len); iounmap(par->v_regs); release_mem_region(fix->mmio_start, fix->mmio_len); pci_set_drvdata(pdev, NULL); fb_dealloc_cmap(&info->cmap); kfree(info->pixmap.addr); framebuffer_release(info); } static struct pci_device_id pm2fb_id_table[] = { { PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TVP4020, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { PCI_VENDOR_ID_3DLABS, PCI_DEVICE_ID_3DLABS_PERMEDIA2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { PCI_VENDOR_ID_3DLABS, PCI_DEVICE_ID_3DLABS_PERMEDIA2V, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { 0, } }; static struct pci_driver pm2fb_driver = { .name = "pm2fb", .id_table = pm2fb_id_table, .probe = pm2fb_probe, .remove = __devexit_p(pm2fb_remove), }; MODULE_DEVICE_TABLE(pci, pm2fb_id_table); #ifndef MODULE /** * Parse user speficied options. * * This is, comma-separated options following `video=pm2fb:'. */ static int __init pm2fb_setup(char *options) { char *this_opt; if (!options || !*options) return 0; while ((this_opt = strsep(&options, ",")) != NULL) { if (!*this_opt) continue; if (!strcmp(this_opt, "lowhsync")) lowhsync = 1; else if (!strcmp(this_opt, "lowvsync")) lowvsync = 1; else if (!strncmp(this_opt, "hwcursor=", 9)) hwcursor = simple_strtoul(this_opt + 9, NULL, 0); #ifdef CONFIG_MTRR else if (!strncmp(this_opt, "nomtrr", 6)) nomtrr = 1; #endif else if (!strncmp(this_opt, "noaccel", 7)) noaccel = 1; else mode_option = this_opt; } return 0; } #endif static int __init pm2fb_init(void) { #ifndef MODULE char *option = NULL; if (fb_get_options("pm2fb", &option)) return -ENODEV; pm2fb_setup(option); #endif return pci_register_driver(&pm2fb_driver); } module_init(pm2fb_init); #ifdef MODULE /* * Cleanup */ static void __exit pm2fb_exit(void) { pci_unregister_driver(&pm2fb_driver); } #endif #ifdef MODULE module_exit(pm2fb_exit); module_param(mode_option, charp, 0); MODULE_PARM_DESC(mode_option, "Initial video mode e.g. '648x480-8@60'"); module_param_named(mode, mode_option, charp, 0); MODULE_PARM_DESC(mode, "Initial video mode e.g. '648x480-8@60' (deprecated)"); module_param(lowhsync, bool, 0); MODULE_PARM_DESC(lowhsync, "Force horizontal sync low regardless of mode"); module_param(lowvsync, bool, 0); MODULE_PARM_DESC(lowvsync, "Force vertical sync low regardless of mode"); module_param(noaccel, bool, 0); MODULE_PARM_DESC(noaccel, "Disable acceleration"); module_param(hwcursor, int, 0644); MODULE_PARM_DESC(hwcursor, "Enable hardware cursor " "(1=enable, 0=disable, default=1)"); #ifdef CONFIG_MTRR module_param(nomtrr, bool, 0); MODULE_PARM_DESC(nomtrr, "Disable MTRR support (0 or 1=disabled) (default=0)"); #endif MODULE_AUTHOR("Jim Hague <jim.hague@acm.org>"); MODULE_DESCRIPTION("Permedia2 framebuffer device driver"); MODULE_LICENSE("GPL"); #endif