/* * Intel Langwell USB Device Controller driver * Copyright (C) 2008-2009, Intel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. * */ #include #if defined(CONFIG_USB_LANGWELL_OTG) #include #endif /*-------------------------------------------------------------------------*/ /* driver data structures and utilities */ /* * dTD: Device Endpoint Transfer Descriptor * describe to the device controller the location and quantity of * data to be send/received for given transfer */ struct langwell_dtd { u32 dtd_next; /* bits 31:5, next transfer element pointer */ #define DTD_NEXT(d) (((d)>>5)&0x7ffffff) #define DTD_NEXT_MASK (0x7ffffff << 5) /* terminate */ #define DTD_TERM BIT(0) /* bits 7:0, execution back states */ u32 dtd_status:8; #define DTD_STATUS(d) (((d)>>0)&0xff) #define DTD_STS_ACTIVE BIT(7) /* active */ #define DTD_STS_HALTED BIT(6) /* halted */ #define DTD_STS_DBE BIT(5) /* data buffer error */ #define DTD_STS_TRE BIT(3) /* transaction error */ /* bits 9:8 */ u32 dtd_res0:2; /* bits 11:10, multipier override */ u32 dtd_multo:2; #define DTD_MULTO (BIT(11) | BIT(10)) /* bits 14:12 */ u32 dtd_res1:3; /* bit 15, interrupt on complete */ u32 dtd_ioc:1; #define DTD_IOC BIT(15) /* bits 30:16, total bytes */ u32 dtd_total:15; #define DTD_TOTAL(d) (((d)>>16)&0x7fff) #define DTD_MAX_TRANSFER_LENGTH 0x4000 /* bit 31 */ u32 dtd_res2:1; /* dTD buffer pointer page 0 to 4 */ u32 dtd_buf[5]; #define DTD_OFFSET_MASK 0xfff /* bits 31:12, buffer pointer */ #define DTD_BUFFER(d) (((d)>>12)&0x3ff) /* bits 11:0, current offset */ #define DTD_C_OFFSET(d) (((d)>>0)&0xfff) /* bits 10:0, frame number */ #define DTD_FRAME(d) (((d)>>0)&0x7ff) /* driver-private parts */ /* dtd dma address */ dma_addr_t dtd_dma; /* next dtd virtual address */ struct langwell_dtd *next_dtd_virt; }; /* * dQH: Device Endpoint Queue Head * describe where all transfers are managed * 48-byte data structure, aligned on 64-byte boundary * * These are associated with dTD structure */ struct langwell_dqh { /* endpoint capabilities and characteristics */ u32 dqh_res0:15; /* bits 14:0 */ u32 dqh_ios:1; /* bit 15, interrupt on setup */ #define DQH_IOS BIT(15) u32 dqh_mpl:11; /* bits 26:16, maximum packet length */ #define DQH_MPL (0x7ff << 16) u32 dqh_res1:2; /* bits 28:27 */ u32 dqh_zlt:1; /* bit 29, zero length termination */ #define DQH_ZLT BIT(29) u32 dqh_mult:2; /* bits 31:30 */ #define DQH_MULT (BIT(30) | BIT(31)) /* current dTD pointer */ u32 dqh_current; /* locate the transfer in progress */ #define DQH_C_DTD(e) \ (((e)>>5)&0x7ffffff) /* bits 31:5, current dTD pointer */ /* transfer overlay, hardware parts of a struct langwell_dtd */ u32 dtd_next; u32 dtd_status:8; /* bits 7:0, execution back states */ u32 dtd_res0:2; /* bits 9:8 */ u32 dtd_multo:2; /* bits 11:10, multipier override */ u32 dtd_res1:3; /* bits 14:12 */ u32 dtd_ioc:1; /* bit 15, interrupt on complete */ u32 dtd_total:15; /* bits 30:16, total bytes */ u32 dtd_res2:1; /* bit 31 */ u32 dtd_buf[5]; /* dTD buffer pointer page 0 to 4 */ u32 dqh_res2; struct usb_ctrlrequest dqh_setup; /* setup packet buffer */ } __attribute__ ((aligned(64))); /* endpoint data structure */ struct langwell_ep { struct usb_ep ep; dma_addr_t dma; struct langwell_udc *dev; unsigned long irqs; struct list_head queue; struct langwell_dqh *dqh; const struct usb_endpoint_descriptor *desc; char name[14]; unsigned stopped:1, ep_type:2, ep_num:8; }; /* request data structure */ struct langwell_request { struct usb_request req; struct langwell_dtd *dtd, *head, *tail; struct langwell_ep *ep; dma_addr_t dtd_dma; struct list_head queue; unsigned dtd_count; unsigned mapped:1; }; /* ep0 transfer state */ enum ep0_state { WAIT_FOR_SETUP, DATA_STATE_XMIT, DATA_STATE_NEED_ZLP, WAIT_FOR_OUT_STATUS, DATA_STATE_RECV, }; /* device suspend state */ enum lpm_state { LPM_L0, /* on */ LPM_L1, /* LPM L1 sleep */ LPM_L2, /* suspend */ LPM_L3, /* off */ }; /* device data structure */ struct langwell_udc { /* each pci device provides one gadget, several endpoints */ struct usb_gadget gadget; spinlock_t lock; /* device lock */ struct langwell_ep *ep; struct usb_gadget_driver *driver; struct otg_transceiver *transceiver; u8 dev_addr; u32 usb_state; u32 resume_state; u32 bus_reset; enum lpm_state lpm_state; enum ep0_state ep0_state; u32 ep0_dir; u16 dciversion; unsigned ep_max; unsigned devcap:1, enabled:1, region:1, got_irq:1, powered:1, remote_wakeup:1, rate:1, is_reset:1, softconnected:1, vbus_active:1, suspended:1, stopped:1, lpm:1; /* LPM capability */ /* pci state used to access those endpoints */ struct pci_dev *pdev; /* Langwell otg transceiver */ struct langwell_otg *lotg; /* control registers */ struct langwell_cap_regs __iomem *cap_regs; struct langwell_op_regs __iomem *op_regs; struct usb_ctrlrequest local_setup_buff; struct langwell_dqh *ep_dqh; size_t ep_dqh_size; dma_addr_t ep_dqh_dma; /* ep0 status request */ struct langwell_request *status_req; /* dma pool */ struct dma_pool *dtd_pool; /* make sure release() is done */ struct completion *done; /* device status data for get_status request */ u16 dev_status; };