/* * m32r_sio.c * * Driver for M32R serial ports * * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. * Based on drivers/serial/8250.c. * * Copyright (C) 2001 Russell King. * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ /* * A note about mapbase / membase * * mapbase is the physical address of the IO port. Currently, we don't * support this very well, and it may well be dropped from this driver * in future. As such, mapbase should be NULL. * * membase is an 'ioremapped' cookie. This is compatible with the old * serial.c driver, and is currently the preferred form. */ #include <linux/config.h> #if defined(CONFIG_SERIAL_M32R_SIO_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ #endif #include <linux/module.h> #include <linux/tty.h> #include <linux/ioport.h> #include <linux/init.h> #include <linux/console.h> #include <linux/sysrq.h> #include <linux/serial.h> #include <linux/serialP.h> #include <linux/delay.h> #include <asm/m32r.h> #include <asm/io.h> #include <asm/irq.h> #define PORT_M32R_BASE PORT_M32R_SIO #define PORT_INDEX(x) (x - PORT_M32R_BASE + 1) #define BAUD_RATE 115200 #include <linux/serial_core.h> #include "m32r_sio.h" #include "m32r_sio_reg.h" /* * Debugging. */ #if 0 #define DEBUG_AUTOCONF(fmt...) printk(fmt) #else #define DEBUG_AUTOCONF(fmt...) do { } while (0) #endif #if 0 #define DEBUG_INTR(fmt...) printk(fmt) #else #define DEBUG_INTR(fmt...) do { } while (0) #endif #define PASS_LIMIT 256 /* * We default to IRQ0 for the "no irq" hack. Some * machine types want others as well - they're free * to redefine this in their header file. */ #define is_real_interrupt(irq) ((irq) != 0) #include <asm/serial.h> /* Standard COM flags */ #define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) /* * SERIAL_PORT_DFNS tells us about built-in ports that have no * standard enumeration mechanism. Platforms that can find all * serial ports via mechanisms like ACPI or PCI need not supply it. */ #undef SERIAL_PORT_DFNS #if defined(CONFIG_PLAT_USRV) #define SERIAL_PORT_DFNS \ /* UART CLK PORT IRQ FLAGS */ \ { 0, BASE_BAUD, 0x3F8, PLD_IRQ_UART0, STD_COM_FLAGS }, /* ttyS0 */ \ { 0, BASE_BAUD, 0x2F8, PLD_IRQ_UART1, STD_COM_FLAGS }, /* ttyS1 */ #else /* !CONFIG_PLAT_USRV */ #if defined(CONFIG_SERIAL_M32R_PLDSIO) #define SERIAL_PORT_DFNS \ { 0, BASE_BAUD, ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV, \ STD_COM_FLAGS }, /* ttyS0 */ #else #define SERIAL_PORT_DFNS \ { 0, BASE_BAUD, M32R_SIO_OFFSET, M32R_IRQ_SIO0_R, \ STD_COM_FLAGS }, /* ttyS0 */ #endif #endif /* !CONFIG_PLAT_USRV */ static struct old_serial_port old_serial_port[] = { SERIAL_PORT_DFNS /* defined in asm/serial.h */ }; #define UART_NR ARRAY_SIZE(old_serial_port) struct uart_sio_port { struct uart_port port; struct timer_list timer; /* "no irq" timer */ struct list_head list; /* ports on this IRQ */ unsigned short rev; unsigned char acr; unsigned char ier; unsigned char lcr; unsigned char mcr_mask; /* mask of user bits */ unsigned char mcr_force; /* mask of forced bits */ unsigned char lsr_break_flag; /* * We provide a per-port pm hook. */ void (*pm)(struct uart_port *port, unsigned int state, unsigned int old); }; struct irq_info { spinlock_t lock; struct list_head *head; }; static struct irq_info irq_lists[NR_IRQS]; /* * Here we define the default xmit fifo size used for each type of UART. */ static const struct serial_uart_config uart_config[] = { [PORT_UNKNOWN] = { .name = "unknown", .dfl_xmit_fifo_size = 1, .flags = 0, }, [PORT_INDEX(PORT_M32R_SIO)] = { .name = "M32RSIO", .dfl_xmit_fifo_size = 1, .flags = 0, }, }; #ifdef CONFIG_SERIAL_M32R_PLDSIO #define __sio_in(x) inw((unsigned long)(x)) #define __sio_out(v,x) outw((v),(unsigned long)(x)) static inline void sio_set_baud_rate(unsigned long baud) { unsigned short sbaud; sbaud = (boot_cpu_data.bus_clock / (baud * 4))-1; __sio_out(sbaud, PLD_ESIO0BAUR); } static void sio_reset(void) { unsigned short tmp; tmp = __sio_in(PLD_ESIO0RXB); tmp = __sio_in(PLD_ESIO0RXB); tmp = __sio_in(PLD_ESIO0CR); sio_set_baud_rate(BAUD_RATE); __sio_out(0x0300, PLD_ESIO0CR); __sio_out(0x0003, PLD_ESIO0CR); } static void sio_init(void) { unsigned short tmp; tmp = __sio_in(PLD_ESIO0RXB); tmp = __sio_in(PLD_ESIO0RXB); tmp = __sio_in(PLD_ESIO0CR); __sio_out(0x0300, PLD_ESIO0CR); __sio_out(0x0003, PLD_ESIO0CR); } static void sio_error(int *status) { printk("SIO0 error[%04x]\n", *status); do { sio_init(); } while ((*status = __sio_in(PLD_ESIO0CR)) != 3); } #else /* not CONFIG_SERIAL_M32R_PLDSIO */ #define __sio_in(x) inl(x) #define __sio_out(v,x) outl((v),(x)) static inline void sio_set_baud_rate(unsigned long baud) { unsigned long i, j; i = boot_cpu_data.bus_clock / (baud * 16); j = (boot_cpu_data.bus_clock - (i * baud * 16)) / baud; i -= 1; j = (j + 1) >> 1; __sio_out(i, M32R_SIO0_BAUR_PORTL); __sio_out(j, M32R_SIO0_RBAUR_PORTL); } static void sio_reset(void) { __sio_out(0x00000300, M32R_SIO0_CR_PORTL); /* init status */ __sio_out(0x00000800, M32R_SIO0_MOD1_PORTL); /* 8bit */ __sio_out(0x00000080, M32R_SIO0_MOD0_PORTL); /* 1stop non */ sio_set_baud_rate(BAUD_RATE); __sio_out(0x00000000, M32R_SIO0_TRCR_PORTL); __sio_out(0x00000003, M32R_SIO0_CR_PORTL); /* RXCEN */ } static void sio_init(void) { unsigned int tmp; tmp = __sio_in(M32R_SIO0_RXB_PORTL); tmp = __sio_in(M32R_SIO0_RXB_PORTL); tmp = __sio_in(M32R_SIO0_STS_PORTL); __sio_out(0x00000003, M32R_SIO0_CR_PORTL); } static void sio_error(int *status) { printk("SIO0 error[%04x]\n", *status); do { sio_init(); } while ((*status = __sio_in(M32R_SIO0_CR_PORTL)) != 3); } #endif /* CONFIG_SERIAL_M32R_PLDSIO */ static _INLINE_ unsigned int sio_in(struct uart_sio_port *up, int offset) { return __sio_in(up->port.iobase + offset); } static _INLINE_ void sio_out(struct uart_sio_port *up, int offset, int value) { __sio_out(value, up->port.iobase + offset); } static _INLINE_ unsigned int serial_in(struct uart_sio_port *up, int offset) { if (!offset) return 0; return __sio_in(offset); } static _INLINE_ void serial_out(struct uart_sio_port *up, int offset, int value) { if (!offset) return; __sio_out(value, offset); } static void m32r_sio_stop_tx(struct uart_port *port) { struct uart_sio_port *up = (struct uart_sio_port *)port; if (up->ier & UART_IER_THRI) { up->ier &= ~UART_IER_THRI; serial_out(up, UART_IER, up->ier); } } static void m32r_sio_start_tx(struct uart_port *port) { #ifdef CONFIG_SERIAL_M32R_PLDSIO struct uart_sio_port *up = (struct uart_sio_port *)port; struct circ_buf *xmit = &up->port.info->xmit; if (!(up->ier & UART_IER_THRI)) { up->ier |= UART_IER_THRI; serial_out(up, UART_IER, up->ier); serial_out(up, UART_TX, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); up->port.icount.tx++; } while((serial_in(up, UART_LSR) & UART_EMPTY) != UART_EMPTY); #else struct uart_sio_port *up = (struct uart_sio_port *)port; if (!(up->ier & UART_IER_THRI)) { up->ier |= UART_IER_THRI; serial_out(up, UART_IER, up->ier); } #endif } static void m32r_sio_stop_rx(struct uart_port *port) { struct uart_sio_port *up = (struct uart_sio_port *)port; up->ier &= ~UART_IER_RLSI; up->port.read_status_mask &= ~UART_LSR_DR; serial_out(up, UART_IER, up->ier); } static void m32r_sio_enable_ms(struct uart_port *port) { struct uart_sio_port *up = (struct uart_sio_port *)port; up->ier |= UART_IER_MSI; serial_out(up, UART_IER, up->ier); } static _INLINE_ void receive_chars(struct uart_sio_port *up, int *status, struct pt_regs *regs) { struct tty_struct *tty = up->port.info->tty; unsigned char ch; int max_count = 256; do { if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) { tty->flip.work.func((void *)tty); if (tty->flip.count >= TTY_FLIPBUF_SIZE) return; // if TTY_DONT_FLIP is set } ch = sio_in(up, SIORXB); *tty->flip.char_buf_ptr = ch; *tty->flip.flag_buf_ptr = TTY_NORMAL; up->port.icount.rx++; if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | UART_LSR_FE | UART_LSR_OE))) { /* * For statistics only */ if (*status & UART_LSR_BI) { *status &= ~(UART_LSR_FE | UART_LSR_PE); up->port.icount.brk++; /* * We do the SysRQ and SAK checking * here because otherwise the break * may get masked by ignore_status_mask * or read_status_mask. */ if (uart_handle_break(&up->port)) goto ignore_char; } else if (*status & UART_LSR_PE) up->port.icount.parity++; else if (*status & UART_LSR_FE) up->port.icount.frame++; if (*status & UART_LSR_OE) up->port.icount.overrun++; /* * Mask off conditions which should be ingored. */ *status &= up->port.read_status_mask; if (up->port.line == up->port.cons->index) { /* Recover the break flag from console xmit */ *status |= up->lsr_break_flag; up->lsr_break_flag = 0; } if (*status & UART_LSR_BI) { DEBUG_INTR("handling break...."); *tty->flip.flag_buf_ptr = TTY_BREAK; } else if (*status & UART_LSR_PE) *tty->flip.flag_buf_ptr = TTY_PARITY; else if (*status & UART_LSR_FE) *tty->flip.flag_buf_ptr = TTY_FRAME; } if (uart_handle_sysrq_char(&up->port, ch, regs)) goto ignore_char; if ((*status & up->port.ignore_status_mask) == 0) { tty->flip.flag_buf_ptr++; tty->flip.char_buf_ptr++; tty->flip.count++; } if ((*status & UART_LSR_OE) && tty->flip.count < TTY_FLIPBUF_SIZE) { /* * Overrun is special, since it's reported * immediately, and doesn't affect the current * character. */ *tty->flip.flag_buf_ptr = TTY_OVERRUN; tty->flip.flag_buf_ptr++; tty->flip.char_buf_ptr++; tty->flip.count++; } ignore_char: *status = serial_in(up, UART_LSR); } while ((*status & UART_LSR_DR) && (max_count-- > 0)); tty_flip_buffer_push(tty); } static _INLINE_ void transmit_chars(struct uart_sio_port *up) { struct circ_buf *xmit = &up->port.info->xmit; int count; if (up->port.x_char) { #ifndef CONFIG_SERIAL_M32R_PLDSIO /* XXX */ serial_out(up, UART_TX, up->port.x_char); #endif up->port.icount.tx++; up->port.x_char = 0; return; } if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { m32r_sio_stop_tx(&up->port); return; } count = up->port.fifosize; do { serial_out(up, UART_TX, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); up->port.icount.tx++; if (uart_circ_empty(xmit)) break; while (!serial_in(up, UART_LSR) & UART_LSR_THRE); } while (--count > 0); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&up->port); DEBUG_INTR("THRE..."); if (uart_circ_empty(xmit)) m32r_sio_stop_tx(&up->port); } /* * This handles the interrupt from one port. */ static inline void m32r_sio_handle_port(struct uart_sio_port *up, unsigned int status, struct pt_regs *regs) { DEBUG_INTR("status = %x...", status); if (status & 0x04) receive_chars(up, &status, regs); if (status & 0x01) transmit_chars(up); } /* * This is the serial driver's interrupt routine. * * Arjan thinks the old way was overly complex, so it got simplified. * Alan disagrees, saying that need the complexity to handle the weird * nature of ISA shared interrupts. (This is a special exception.) * * In order to handle ISA shared interrupts properly, we need to check * that all ports have been serviced, and therefore the ISA interrupt * line has been de-asserted. * * This means we need to loop through all ports. checking that they * don't have an interrupt pending. */ static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id, struct pt_regs *regs) { struct irq_info *i = dev_id; struct list_head *l, *end = NULL; int pass_counter = 0; DEBUG_INTR("m32r_sio_interrupt(%d)...", irq); #ifdef CONFIG_SERIAL_M32R_PLDSIO // if (irq == PLD_IRQ_SIO0_SND) // irq = PLD_IRQ_SIO0_RCV; #else if (irq == M32R_IRQ_SIO0_S) irq = M32R_IRQ_SIO0_R; #endif spin_lock(&i->lock); l = i->head; do { struct uart_sio_port *up; unsigned int sts; up = list_entry(l, struct uart_sio_port, list); sts = sio_in(up, SIOSTS); if (sts & 0x5) { spin_lock(&up->port.lock); m32r_sio_handle_port(up, sts, regs); spin_unlock(&up->port.lock); end = NULL; } else if (end == NULL) end = l; l = l->next; if (l == i->head && pass_counter++ > PASS_LIMIT) { if (sts & 0xe0) sio_error(&sts); break; } } while (l != end); spin_unlock(&i->lock); DEBUG_INTR("end.\n"); return IRQ_HANDLED; } /* * To support ISA shared interrupts, we need to have one interrupt * handler that ensures that the IRQ line has been deasserted * before returning. Failing to do this will result in the IRQ * line being stuck active, and, since ISA irqs are edge triggered, * no more IRQs will be seen. */ static void serial_do_unlink(struct irq_info *i, struct uart_sio_port *up) { spin_lock_irq(&i->lock); if (!list_empty(i->head)) { if (i->head == &up->list) i->head = i->head->next; list_del(&up->list); } else { BUG_ON(i->head != &up->list); i->head = NULL; } spin_unlock_irq(&i->lock); } static int serial_link_irq_chain(struct uart_sio_port *up) { struct irq_info *i = irq_lists + up->port.irq; int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? SA_SHIRQ : 0; spin_lock_irq(&i->lock); if (i->head) { list_add(&up->list, i->head); spin_unlock_irq(&i->lock); ret = 0; } else { INIT_LIST_HEAD(&up->list); i->head = &up->list; spin_unlock_irq(&i->lock); ret = request_irq(up->port.irq, m32r_sio_interrupt, irq_flags, "SIO0-RX", i); ret |= request_irq(up->port.irq + 1, m32r_sio_interrupt, irq_flags, "SIO0-TX", i); if (ret < 0) serial_do_unlink(i, up); } return ret; } static void serial_unlink_irq_chain(struct uart_sio_port *up) { struct irq_info *i = irq_lists + up->port.irq; BUG_ON(i->head == NULL); if (list_empty(i->head)) { free_irq(up->port.irq, i); free_irq(up->port.irq + 1, i); } serial_do_unlink(i, up); } /* * This function is used to handle ports that do not have an interrupt. */ static void m32r_sio_timeout(unsigned long data) { struct uart_sio_port *up = (struct uart_sio_port *)data; unsigned int timeout; unsigned int sts; sts = sio_in(up, SIOSTS); if (sts & 0x5) { spin_lock(&up->port.lock); m32r_sio_handle_port(up, sts, NULL); spin_unlock(&up->port.lock); } timeout = up->port.timeout; timeout = timeout > 6 ? (timeout / 2 - 2) : 1; mod_timer(&up->timer, jiffies + timeout); } static unsigned int m32r_sio_tx_empty(struct uart_port *port) { struct uart_sio_port *up = (struct uart_sio_port *)port; unsigned long flags; unsigned int ret; spin_lock_irqsave(&up->port.lock, flags); ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; spin_unlock_irqrestore(&up->port.lock, flags); return ret; } static unsigned int m32r_sio_get_mctrl(struct uart_port *port) { return 0; } static void m32r_sio_set_mctrl(struct uart_port *port, unsigned int mctrl) { } static void m32r_sio_break_ctl(struct uart_port *port, int break_state) { } static int m32r_sio_startup(struct uart_port *port) { struct uart_sio_port *up = (struct uart_sio_port *)port; int retval; sio_init(); /* * If the "interrupt" for this port doesn't correspond with any * hardware interrupt, we use a timer-based system. The original * driver used to do this with IRQ0. */ if (!is_real_interrupt(up->port.irq)) { unsigned int timeout = up->port.timeout; timeout = timeout > 6 ? (timeout / 2 - 2) : 1; up->timer.data = (unsigned long)up; mod_timer(&up->timer, jiffies + timeout); } else { retval = serial_link_irq_chain(up); if (retval) return retval; } /* * Finally, enable interrupts. Note: Modem status interrupts * are set via set_termios(), which will be occurring imminently * anyway, so we don't enable them here. * - M32R_SIO: 0x0c * - M32R_PLDSIO: 0x04 */ up->ier = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; sio_out(up, SIOTRCR, up->ier); /* * And clear the interrupt registers again for luck. */ sio_reset(); return 0; } static void m32r_sio_shutdown(struct uart_port *port) { struct uart_sio_port *up = (struct uart_sio_port *)port; /* * Disable interrupts from this port */ up->ier = 0; sio_out(up, SIOTRCR, 0); /* * Disable break condition and FIFOs */ sio_init(); if (!is_real_interrupt(up->port.irq)) del_timer_sync(&up->timer); else serial_unlink_irq_chain(up); } static unsigned int m32r_sio_get_divisor(struct uart_port *port, unsigned int baud) { return uart_get_divisor(port, baud); } static void m32r_sio_set_termios(struct uart_port *port, struct termios *termios, struct termios *old) { struct uart_sio_port *up = (struct uart_sio_port *)port; unsigned char cval = 0; unsigned long flags; unsigned int baud, quot; switch (termios->c_cflag & CSIZE) { case CS5: cval = UART_LCR_WLEN5; break; case CS6: cval = UART_LCR_WLEN6; break; case CS7: cval = UART_LCR_WLEN7; break; default: case CS8: cval = UART_LCR_WLEN8; break; } if (termios->c_cflag & CSTOPB) cval |= UART_LCR_STOP; if (termios->c_cflag & PARENB) cval |= UART_LCR_PARITY; if (!(termios->c_cflag & PARODD)) cval |= UART_LCR_EPAR; #ifdef CMSPAR if (termios->c_cflag & CMSPAR) cval |= UART_LCR_SPAR; #endif /* * Ask the core to calculate the divisor for us. */ #ifdef CONFIG_SERIAL_M32R_PLDSIO baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4); #else baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); #endif quot = m32r_sio_get_divisor(port, baud); /* * Ok, we're now changing the port state. Do it with * interrupts disabled. */ spin_lock_irqsave(&up->port.lock, flags); sio_set_baud_rate(baud); /* * Update the per-port timeout. */ uart_update_timeout(port, termios->c_cflag, baud); up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; if (termios->c_iflag & INPCK) up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; if (termios->c_iflag & (BRKINT | PARMRK)) up->port.read_status_mask |= UART_LSR_BI; /* * Characteres to ignore */ up->port.ignore_status_mask = 0; if (termios->c_iflag & IGNPAR) up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; if (termios->c_iflag & IGNBRK) { up->port.ignore_status_mask |= UART_LSR_BI; /* * If we're ignoring parity and break indicators, * ignore overruns too (for real raw support). */ if (termios->c_iflag & IGNPAR) up->port.ignore_status_mask |= UART_LSR_OE; } /* * ignore all characters if CREAD is not set */ if ((termios->c_cflag & CREAD) == 0) up->port.ignore_status_mask |= UART_LSR_DR; /* * CTS flow control flag and modem status interrupts */ up->ier &= ~UART_IER_MSI; if (UART_ENABLE_MS(&up->port, termios->c_cflag)) up->ier |= UART_IER_MSI; serial_out(up, UART_IER, up->ier); up->lcr = cval; /* Save LCR */ spin_unlock_irqrestore(&up->port.lock, flags); } static void m32r_sio_pm(struct uart_port *port, unsigned int state, unsigned int oldstate) { struct uart_sio_port *up = (struct uart_sio_port *)port; if (up->pm) up->pm(port, state, oldstate); } /* * Resource handling. This is complicated by the fact that resources * depend on the port type. Maybe we should be claiming the standard * 8250 ports, and then trying to get other resources as necessary? */ static int m32r_sio_request_std_resource(struct uart_sio_port *up, struct resource **res) { unsigned int size = 8 << up->port.regshift; #ifndef CONFIG_SERIAL_M32R_PLDSIO unsigned long start; #endif int ret = 0; switch (up->port.iotype) { case UPIO_MEM: if (up->port.mapbase) { #ifdef CONFIG_SERIAL_M32R_PLDSIO *res = request_mem_region(up->port.mapbase, size, "serial"); #else start = up->port.mapbase; *res = request_mem_region(start, size, "serial"); #endif if (!*res) ret = -EBUSY; } break; case UPIO_PORT: *res = request_region(up->port.iobase, size, "serial"); if (!*res) ret = -EBUSY; break; } return ret; } static void m32r_sio_release_port(struct uart_port *port) { struct uart_sio_port *up = (struct uart_sio_port *)port; unsigned long start, offset = 0, size = 0; size <<= up->port.regshift; switch (up->port.iotype) { case UPIO_MEM: if (up->port.mapbase) { /* * Unmap the area. */ iounmap(up->port.membase); up->port.membase = NULL; start = up->port.mapbase; if (size) release_mem_region(start + offset, size); release_mem_region(start, 8 << up->port.regshift); } break; case UPIO_PORT: start = up->port.iobase; if (size) release_region(start + offset, size); release_region(start + offset, 8 << up->port.regshift); break; default: break; } } static int m32r_sio_request_port(struct uart_port *port) { struct uart_sio_port *up = (struct uart_sio_port *)port; struct resource *res = NULL; int ret = 0; ret = m32r_sio_request_std_resource(up, &res); /* * If we have a mapbase, then request that as well. */ if (ret == 0 && up->port.flags & UPF_IOREMAP) { int size = res->end - res->start + 1; up->port.membase = ioremap(up->port.mapbase, size); if (!up->port.membase) ret = -ENOMEM; } if (ret < 0) { if (res) release_resource(res); } return ret; } static void m32r_sio_config_port(struct uart_port *port, int flags) { struct uart_sio_port *up = (struct uart_sio_port *)port; spin_lock_irqsave(&up->port.lock, flags); up->port.type = (PORT_M32R_SIO - PORT_M32R_BASE + 1); up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size; spin_unlock_irqrestore(&up->port.lock, flags); } static int m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser) { if (ser->irq >= NR_IRQS || ser->irq < 0 || ser->baud_base < 9600 || ser->type < PORT_UNKNOWN || ser->type >= ARRAY_SIZE(uart_config)) return -EINVAL; return 0; } static const char * m32r_sio_type(struct uart_port *port) { int type = port->type; if (type >= ARRAY_SIZE(uart_config)) type = 0; return uart_config[type].name; } static struct uart_ops m32r_sio_pops = { .tx_empty = m32r_sio_tx_empty, .set_mctrl = m32r_sio_set_mctrl, .get_mctrl = m32r_sio_get_mctrl, .stop_tx = m32r_sio_stop_tx, .start_tx = m32r_sio_start_tx, .stop_rx = m32r_sio_stop_rx, .enable_ms = m32r_sio_enable_ms, .break_ctl = m32r_sio_break_ctl, .startup = m32r_sio_startup, .shutdown = m32r_sio_shutdown, .set_termios = m32r_sio_set_termios, .pm = m32r_sio_pm, .type = m32r_sio_type, .release_port = m32r_sio_release_port, .request_port = m32r_sio_request_port, .config_port = m32r_sio_config_port, .verify_port = m32r_sio_verify_port, }; static struct uart_sio_port m32r_sio_ports[UART_NR]; static void __init m32r_sio_init_ports(void) { struct uart_sio_port *up; static int first = 1; int i; if (!first) return; first = 0; for (i = 0, up = m32r_sio_ports; i < ARRAY_SIZE(old_serial_port); i++, up++) { up->port.iobase = old_serial_port[i].port; up->port.irq = irq_canonicalize(old_serial_port[i].irq); up->port.uartclk = old_serial_port[i].baud_base * 16; up->port.flags = old_serial_port[i].flags; up->port.membase = old_serial_port[i].iomem_base; up->port.iotype = old_serial_port[i].io_type; up->port.regshift = old_serial_port[i].iomem_reg_shift; up->port.ops = &m32r_sio_pops; } } static void __init m32r_sio_register_ports(struct uart_driver *drv) { int i; m32r_sio_init_ports(); for (i = 0; i < UART_NR; i++) { struct uart_sio_port *up = &m32r_sio_ports[i]; up->port.line = i; up->port.ops = &m32r_sio_pops; init_timer(&up->timer); up->timer.function = m32r_sio_timeout; /* * ALPHA_KLUDGE_MCR needs to be killed. */ up->mcr_mask = ~ALPHA_KLUDGE_MCR; up->mcr_force = ALPHA_KLUDGE_MCR; uart_add_one_port(drv, &up->port); } } #ifdef CONFIG_SERIAL_M32R_SIO_CONSOLE /* * Wait for transmitter & holding register to empty */ static inline void wait_for_xmitr(struct uart_sio_port *up) { unsigned int status, tmout = 10000; /* Wait up to 10ms for the character(s) to be sent. */ do { status = sio_in(up, SIOSTS); if (--tmout == 0) break; udelay(1); } while ((status & UART_EMPTY) != UART_EMPTY); /* Wait up to 1s for flow control if necessary */ if (up->port.flags & UPF_CONS_FLOW) { tmout = 1000000; while (--tmout) udelay(1); } } /* * Print a string to the serial port trying not to disturb * any possible real use of the port... * * The console_lock must be held when we get here. */ static void m32r_sio_console_write(struct console *co, const char *s, unsigned int count) { struct uart_sio_port *up = &m32r_sio_ports[co->index]; unsigned int ier; int i; /* * First save the UER then disable the interrupts */ ier = sio_in(up, SIOTRCR); sio_out(up, SIOTRCR, 0); /* * Now, do each character */ for (i = 0; i < count; i++, s++) { wait_for_xmitr(up); /* * Send the character out. * If a LF, also do CR... */ sio_out(up, SIOTXB, *s); if (*s == 10) { wait_for_xmitr(up); sio_out(up, SIOTXB, 13); } } /* * Finally, wait for transmitter to become empty * and restore the IER */ wait_for_xmitr(up); sio_out(up, SIOTRCR, ier); } static int __init m32r_sio_console_setup(struct console *co, char *options) { struct uart_port *port; int baud = 9600; int bits = 8; int parity = 'n'; int flow = 'n'; /* * Check whether an invalid uart number has been specified, and * if so, search for the first available port that does have * console support. */ if (co->index >= UART_NR) co->index = 0; port = &m32r_sio_ports[co->index].port; /* * Temporary fix. */ spin_lock_init(&port->lock); if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); return uart_set_options(port, co, baud, parity, bits, flow); } static struct uart_driver m32r_sio_reg; static struct console m32r_sio_console = { .name = "ttyS", .write = m32r_sio_console_write, .device = uart_console_device, .setup = m32r_sio_console_setup, .flags = CON_PRINTBUFFER, .index = -1, .data = &m32r_sio_reg, }; static int __init m32r_sio_console_init(void) { sio_reset(); sio_init(); m32r_sio_init_ports(); register_console(&m32r_sio_console); return 0; } console_initcall(m32r_sio_console_init); #define M32R_SIO_CONSOLE &m32r_sio_console #else #define M32R_SIO_CONSOLE NULL #endif static struct uart_driver m32r_sio_reg = { .owner = THIS_MODULE, .driver_name = "sio", .devfs_name = "tts/", .dev_name = "ttyS", .major = TTY_MAJOR, .minor = 64, .nr = UART_NR, .cons = M32R_SIO_CONSOLE, }; /** * m32r_sio_suspend_port - suspend one serial port * @line: serial line number * * Suspend one serial port. */ void m32r_sio_suspend_port(int line) { uart_suspend_port(&m32r_sio_reg, &m32r_sio_ports[line].port); } /** * m32r_sio_resume_port - resume one serial port * @line: serial line number * * Resume one serial port. */ void m32r_sio_resume_port(int line) { uart_resume_port(&m32r_sio_reg, &m32r_sio_ports[line].port); } static int __init m32r_sio_init(void) { int ret, i; printk(KERN_INFO "Serial: M32R SIO driver $Revision: 1.11 $ "); for (i = 0; i < NR_IRQS; i++) spin_lock_init(&irq_lists[i].lock); ret = uart_register_driver(&m32r_sio_reg); if (ret >= 0) m32r_sio_register_ports(&m32r_sio_reg); return ret; } static void __exit m32r_sio_exit(void) { int i; for (i = 0; i < UART_NR; i++) uart_remove_one_port(&m32r_sio_reg, &m32r_sio_ports[i].port); uart_unregister_driver(&m32r_sio_reg); } module_init(m32r_sio_init); module_exit(m32r_sio_exit); EXPORT_SYMBOL(m32r_sio_suspend_port); EXPORT_SYMBOL(m32r_sio_resume_port); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Generic M32R SIO serial driver $Revision: 1.11 $");