/* * linux/drivers/char/at91_serial.c * * Driver for Atmel AT91RM9200 Serial ports * Copyright (C) 2003 Rick Bronson * * Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd. * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * */ #include <linux/module.h> #include <linux/tty.h> #include <linux/ioport.h> #include <linux/slab.h> #include <linux/init.h> #include <linux/serial.h> #include <linux/clk.h> #include <linux/console.h> #include <linux/sysrq.h> #include <linux/tty_flip.h> #include <linux/platform_device.h> #include <asm/io.h> #include <asm/arch/at91rm9200_usart.h> #include <asm/arch/at91rm9200_pdc.h> #include <asm/mach/serial_at91.h> #include <asm/arch/board.h> #include <asm/arch/system.h> #include <asm/arch/gpio.h> #if defined(CONFIG_SERIAL_AT91_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ #endif #include <linux/serial_core.h> #ifdef CONFIG_SERIAL_AT91_TTYAT /* Use device name ttyAT, major 204 and minor 154-169. This is necessary if we * should coexist with the 8250 driver, such as if we have an external 16C550 * UART. */ #define SERIAL_AT91_MAJOR 204 #define MINOR_START 154 #define AT91_DEVICENAME "ttyAT" #else /* Use device name ttyS, major 4, minor 64-68. This is the usual serial port * name, but it is legally reserved for the 8250 driver. */ #define SERIAL_AT91_MAJOR TTY_MAJOR #define MINOR_START 64 #define AT91_DEVICENAME "ttyS" #endif #define AT91_ISR_PASS_LIMIT 256 #define UART_PUT_CR(port,v) writel(v, (port)->membase + AT91_US_CR) #define UART_GET_MR(port) readl((port)->membase + AT91_US_MR) #define UART_PUT_MR(port,v) writel(v, (port)->membase + AT91_US_MR) #define UART_PUT_IER(port,v) writel(v, (port)->membase + AT91_US_IER) #define UART_PUT_IDR(port,v) writel(v, (port)->membase + AT91_US_IDR) #define UART_GET_IMR(port) readl((port)->membase + AT91_US_IMR) #define UART_GET_CSR(port) readl((port)->membase + AT91_US_CSR) #define UART_GET_CHAR(port) readl((port)->membase + AT91_US_RHR) #define UART_PUT_CHAR(port,v) writel(v, (port)->membase + AT91_US_THR) #define UART_GET_BRGR(port) readl((port)->membase + AT91_US_BRGR) #define UART_PUT_BRGR(port,v) writel(v, (port)->membase + AT91_US_BRGR) #define UART_PUT_RTOR(port,v) writel(v, (port)->membase + AT91_US_RTOR) // #define UART_GET_CR(port) readl((port)->membase + AT91_US_CR) // is write-only /* PDC registers */ #define UART_PUT_PTCR(port,v) writel(v, (port)->membase + AT91_PDC_PTCR) #define UART_GET_PTSR(port) readl((port)->membase + AT91_PDC_PTSR) #define UART_PUT_RPR(port,v) writel(v, (port)->membase + AT91_PDC_RPR) #define UART_GET_RPR(port) readl((port)->membase + AT91_PDC_RPR) #define UART_PUT_RCR(port,v) writel(v, (port)->membase + AT91_PDC_RCR) #define UART_PUT_RNPR(port,v) writel(v, (port)->membase + AT91_PDC_RNPR) #define UART_PUT_RNCR(port,v) writel(v, (port)->membase + AT91_PDC_RNCR) #define UART_PUT_TPR(port,v) writel(v, (port)->membase + AT91_PDC_TPR) #define UART_PUT_TCR(port,v) writel(v, (port)->membase + AT91_PDC_TCR) //#define UART_PUT_TNPR(port,v) writel(v, (port)->membase + AT91_PDC_TNPR) //#define UART_PUT_TNCR(port,v) writel(v, (port)->membase + AT91_PDC_TNCR) static int (*at91_open)(struct uart_port *); static void (*at91_close)(struct uart_port *); /* * We wrap our port structure around the generic uart_port. */ struct at91_uart_port { struct uart_port uart; /* uart */ struct clk *clk; /* uart clock */ unsigned short suspended; /* is port suspended? */ }; static struct at91_uart_port at91_ports[AT91_NR_UART]; #ifdef SUPPORT_SYSRQ static struct console at91_console; #endif /* * Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty. */ static u_int at91_tx_empty(struct uart_port *port) { return (UART_GET_CSR(port) & AT91_US_TXEMPTY) ? TIOCSER_TEMT : 0; } /* * Set state of the modem control output lines */ static void at91_set_mctrl(struct uart_port *port, u_int mctrl) { unsigned int control = 0; unsigned int mode; if (arch_identify() == ARCH_ID_AT91RM9200) { /* * AT91RM9200 Errata #39: RTS0 is not internally connected to PA21. * We need to drive the pin manually. */ if (port->mapbase == AT91_BASE_US0) { if (mctrl & TIOCM_RTS) at91_set_gpio_value(AT91_PIN_PA21, 0); else at91_set_gpio_value(AT91_PIN_PA21, 1); } } if (mctrl & TIOCM_RTS) control |= AT91_US_RTSEN; else control |= AT91_US_RTSDIS; if (mctrl & TIOCM_DTR) control |= AT91_US_DTREN; else control |= AT91_US_DTRDIS; UART_PUT_CR(port, control); /* Local loopback mode? */ mode = UART_GET_MR(port) & ~AT91_US_CHMODE; if (mctrl & TIOCM_LOOP) mode |= AT91_US_CHMODE_LOC_LOOP; else mode |= AT91_US_CHMODE_NORMAL; UART_PUT_MR(port, mode); } /* * Get state of the modem control input lines */ static u_int at91_get_mctrl(struct uart_port *port) { unsigned int status, ret = 0; status = UART_GET_CSR(port); /* * The control signals are active low. */ if (!(status & AT91_US_DCD)) ret |= TIOCM_CD; if (!(status & AT91_US_CTS)) ret |= TIOCM_CTS; if (!(status & AT91_US_DSR)) ret |= TIOCM_DSR; if (!(status & AT91_US_RI)) ret |= TIOCM_RI; return ret; } /* * Stop transmitting. */ static void at91_stop_tx(struct uart_port *port) { struct at91_uart_port *at91_port = (struct at91_uart_port *) port; UART_PUT_IDR(port, AT91_US_TXRDY); } /* * Start transmitting. */ static void at91_start_tx(struct uart_port *port) { struct at91_uart_port *at91_port = (struct at91_uart_port *) port; UART_PUT_IER(port, AT91_US_TXRDY); } /* * Stop receiving - port is in process of being closed. */ static void at91_stop_rx(struct uart_port *port) { struct at91_uart_port *at91_port = (struct at91_uart_port *) port; UART_PUT_IDR(port, AT91_US_RXRDY); } /* * Enable modem status interrupts */ static void at91_enable_ms(struct uart_port *port) { UART_PUT_IER(port, AT91_US_RIIC | AT91_US_DSRIC | AT91_US_DCDIC | AT91_US_CTSIC); } /* * Control the transmission of a break signal */ static void at91_break_ctl(struct uart_port *port, int break_state) { if (break_state != 0) UART_PUT_CR(port, AT91_US_STTBRK); /* start break */ else UART_PUT_CR(port, AT91_US_STPBRK); /* stop break */ } /* * Characters received (called from interrupt handler) */ static void at91_rx_chars(struct uart_port *port, struct pt_regs *regs) { struct tty_struct *tty = port->info->tty; unsigned int status, ch, flg; status = UART_GET_CSR(port); while (status & AT91_US_RXRDY) { ch = UART_GET_CHAR(port); port->icount.rx++; flg = TTY_NORMAL; /* * note that the error handling code is * out of the main execution path */ if (unlikely(status & (AT91_US_PARE | AT91_US_FRAME | AT91_US_OVRE | AT91_US_RXBRK))) { UART_PUT_CR(port, AT91_US_RSTSTA); /* clear error */ if (status & AT91_US_RXBRK) { status &= ~(AT91_US_PARE | AT91_US_FRAME); /* ignore side-effect */ port->icount.brk++; if (uart_handle_break(port)) goto ignore_char; } if (status & AT91_US_PARE) port->icount.parity++; if (status & AT91_US_FRAME) port->icount.frame++; if (status & AT91_US_OVRE) port->icount.overrun++; status &= port->read_status_mask; if (status & AT91_US_RXBRK) flg = TTY_BREAK; else if (status & AT91_US_PARE) flg = TTY_PARITY; else if (status & AT91_US_FRAME) flg = TTY_FRAME; } if (uart_handle_sysrq_char(port, ch, regs)) goto ignore_char; uart_insert_char(port, status, AT91_US_OVRE, ch, flg); ignore_char: status = UART_GET_CSR(port); } tty_flip_buffer_push(tty); } /* * Transmit characters (called from interrupt handler) */ static void at91_tx_chars(struct uart_port *port) { struct circ_buf *xmit = &port->info->xmit; if (port->x_char) { UART_PUT_CHAR(port, port->x_char); port->icount.tx++; port->x_char = 0; return; } if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { at91_stop_tx(port); return; } while (UART_GET_CSR(port) & AT91_US_TXRDY) { UART_PUT_CHAR(port, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); port->icount.tx++; if (uart_circ_empty(xmit)) break; } if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); if (uart_circ_empty(xmit)) at91_stop_tx(port); } /* * Interrupt handler */ static irqreturn_t at91_interrupt(int irq, void *dev_id, struct pt_regs *regs) { struct uart_port *port = dev_id; struct at91_uart_port *at91_port = (struct at91_uart_port *) port; unsigned int status, pending, pass_counter = 0; status = UART_GET_CSR(port); pending = status & UART_GET_IMR(port); while (pending) { /* Interrupt receive */ if (pending & AT91_US_RXRDY) at91_rx_chars(port, regs); // TODO: All reads to CSR will clear these interrupts! if (pending & AT91_US_RIIC) port->icount.rng++; if (pending & AT91_US_DSRIC) port->icount.dsr++; if (pending & AT91_US_DCDIC) uart_handle_dcd_change(port, !(status & AT91_US_DCD)); if (pending & AT91_US_CTSIC) uart_handle_cts_change(port, !(status & AT91_US_CTS)); if (pending & (AT91_US_RIIC | AT91_US_DSRIC | AT91_US_DCDIC | AT91_US_CTSIC)) wake_up_interruptible(&port->info->delta_msr_wait); /* Interrupt transmit */ if (pending & AT91_US_TXRDY) at91_tx_chars(port); if (pass_counter++ > AT91_ISR_PASS_LIMIT) break; status = UART_GET_CSR(port); pending = status & UART_GET_IMR(port); } return IRQ_HANDLED; } /* * Perform initialization and enable port for reception */ static int at91_startup(struct uart_port *port) { struct at91_uart_port *at91_port = (struct at91_uart_port *) port; int retval; /* * Ensure that no interrupts are enabled otherwise when * request_irq() is called we could get stuck trying to * handle an unexpected interrupt */ UART_PUT_IDR(port, -1); /* * Allocate the IRQ */ retval = request_irq(port->irq, at91_interrupt, IRQF_SHARED, "at91_serial", port); if (retval) { printk("at91_serial: at91_startup - Can't get irq\n"); return retval; } /* * If there is a specific "open" function (to register * control line interrupts) */ if (at91_open) { retval = at91_open(port); if (retval) { free_irq(port->irq, port); return retval; } } /* * Finally, enable the serial port */ UART_PUT_CR(port, AT91_US_RSTSTA | AT91_US_RSTRX); UART_PUT_CR(port, AT91_US_TXEN | AT91_US_RXEN); /* enable xmit & rcvr */ UART_PUT_IER(port, AT91_US_RXRDY); /* enable receive only */ return 0; } /* * Disable the port */ static void at91_shutdown(struct uart_port *port) { struct at91_uart_port *at91_port = (struct at91_uart_port *) port; /* * Disable all interrupts, port and break condition. */ UART_PUT_CR(port, AT91_US_RSTSTA); UART_PUT_IDR(port, -1); /* * Free the interrupt */ free_irq(port->irq, port); /* * If there is a specific "close" function (to unregister * control line interrupts) */ if (at91_close) at91_close(port); } /* * Power / Clock management. */ static void at91_serial_pm(struct uart_port *port, unsigned int state, unsigned int oldstate) { struct at91_uart_port *at91_port = (struct at91_uart_port *) port; switch (state) { case 0: /* * Enable the peripheral clock for this serial port. * This is called on uart_open() or a resume event. */ clk_enable(at91_port->clk); break; case 3: /* * Disable the peripheral clock for this serial port. * This is called on uart_close() or a suspend event. */ clk_disable(at91_port->clk); break; default: printk(KERN_ERR "at91_serial: unknown pm %d\n", state); } } /* * Change the port parameters */ static void at91_set_termios(struct uart_port *port, struct termios * termios, struct termios * old) { unsigned long flags; unsigned int mode, imr, quot, baud; baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); quot = uart_get_divisor(port, baud); /* Get current mode register */ mode = UART_GET_MR(port) & ~(AT91_US_CHRL | AT91_US_NBSTOP | AT91_US_PAR); /* byte size */ switch (termios->c_cflag & CSIZE) { case CS5: mode |= AT91_US_CHRL_5; break; case CS6: mode |= AT91_US_CHRL_6; break; case CS7: mode |= AT91_US_CHRL_7; break; default: mode |= AT91_US_CHRL_8; break; } /* stop bits */ if (termios->c_cflag & CSTOPB) mode |= AT91_US_NBSTOP_2; /* parity */ if (termios->c_cflag & PARENB) { if (termios->c_cflag & CMSPAR) { /* Mark or Space parity */ if (termios->c_cflag & PARODD) mode |= AT91_US_PAR_MARK; else mode |= AT91_US_PAR_SPACE; } else if (termios->c_cflag & PARODD) mode |= AT91_US_PAR_ODD; else mode |= AT91_US_PAR_EVEN; } else mode |= AT91_US_PAR_NONE; spin_lock_irqsave(&port->lock, flags); port->read_status_mask = AT91_US_OVRE; if (termios->c_iflag & INPCK) port->read_status_mask |= (AT91_US_FRAME | AT91_US_PARE); if (termios->c_iflag & (BRKINT | PARMRK)) port->read_status_mask |= AT91_US_RXBRK; /* * Characters to ignore */ port->ignore_status_mask = 0; if (termios->c_iflag & IGNPAR) port->ignore_status_mask |= (AT91_US_FRAME | AT91_US_PARE); if (termios->c_iflag & IGNBRK) { port->ignore_status_mask |= AT91_US_RXBRK; /* * If we're ignoring parity and break indicators, * ignore overruns too (for real raw support). */ if (termios->c_iflag & IGNPAR) port->ignore_status_mask |= AT91_US_OVRE; } // TODO: Ignore all characters if CREAD is set. /* update the per-port timeout */ uart_update_timeout(port, termios->c_cflag, baud); /* disable interrupts and drain transmitter */ imr = UART_GET_IMR(port); /* get interrupt mask */ UART_PUT_IDR(port, -1); /* disable all interrupts */ while (!(UART_GET_CSR(port) & AT91_US_TXEMPTY)) { barrier(); } /* disable receiver and transmitter */ UART_PUT_CR(port, AT91_US_TXDIS | AT91_US_RXDIS); /* set the parity, stop bits and data size */ UART_PUT_MR(port, mode); /* set the baud rate */ UART_PUT_BRGR(port, quot); UART_PUT_CR(port, AT91_US_RSTSTA | AT91_US_RSTRX); UART_PUT_CR(port, AT91_US_TXEN | AT91_US_RXEN); /* restore interrupts */ UART_PUT_IER(port, imr); /* CTS flow-control and modem-status interrupts */ if (UART_ENABLE_MS(port, termios->c_cflag)) port->ops->enable_ms(port); spin_unlock_irqrestore(&port->lock, flags); } /* * Return string describing the specified port */ static const char *at91_type(struct uart_port *port) { return (port->type == PORT_AT91) ? "AT91_SERIAL" : NULL; } /* * Release the memory region(s) being used by 'port'. */ static void at91_release_port(struct uart_port *port) { struct platform_device *pdev = to_platform_device(port->dev); int size = pdev->resource[0].end - pdev->resource[0].start + 1; release_mem_region(port->mapbase, size); if (port->flags & UPF_IOREMAP) { iounmap(port->membase); port->membase = NULL; } } /* * Request the memory region(s) being used by 'port'. */ static int at91_request_port(struct uart_port *port) { struct platform_device *pdev = to_platform_device(port->dev); int size = pdev->resource[0].end - pdev->resource[0].start + 1; if (!request_mem_region(port->mapbase, size, "at91_serial")) return -EBUSY; if (port->flags & UPF_IOREMAP) { port->membase = ioremap(port->mapbase, size); if (port->membase == NULL) { release_mem_region(port->mapbase, size); return -ENOMEM; } } return 0; } /* * Configure/autoconfigure the port. */ static void at91_config_port(struct uart_port *port, int flags) { if (flags & UART_CONFIG_TYPE) { port->type = PORT_AT91; at91_request_port(port); } } /* * Verify the new serial_struct (for TIOCSSERIAL). */ static int at91_verify_port(struct uart_port *port, struct serial_struct *ser) { int ret = 0; if (ser->type != PORT_UNKNOWN && ser->type != PORT_AT91) ret = -EINVAL; if (port->irq != ser->irq) ret = -EINVAL; if (ser->io_type != SERIAL_IO_MEM) ret = -EINVAL; if (port->uartclk / 16 != ser->baud_base) ret = -EINVAL; if ((void *)port->mapbase != ser->iomem_base) ret = -EINVAL; if (port->iobase != ser->port) ret = -EINVAL; if (ser->hub6 != 0) ret = -EINVAL; return ret; } static struct uart_ops at91_pops = { .tx_empty = at91_tx_empty, .set_mctrl = at91_set_mctrl, .get_mctrl = at91_get_mctrl, .stop_tx = at91_stop_tx, .start_tx = at91_start_tx, .stop_rx = at91_stop_rx, .enable_ms = at91_enable_ms, .break_ctl = at91_break_ctl, .startup = at91_startup, .shutdown = at91_shutdown, .set_termios = at91_set_termios, .type = at91_type, .release_port = at91_release_port, .request_port = at91_request_port, .config_port = at91_config_port, .verify_port = at91_verify_port, .pm = at91_serial_pm, }; /* * Configure the port from the platform device resource info. */ static void __devinit at91_init_port(struct at91_uart_port *at91_port, struct platform_device *pdev) { struct uart_port *port = &at91_port->uart; struct at91_uart_data *data = pdev->dev.platform_data; port->iotype = UPIO_MEM; port->flags = UPF_BOOT_AUTOCONF; port->ops = &at91_pops; port->fifosize = 1; port->line = pdev->id; port->dev = &pdev->dev; port->mapbase = pdev->resource[0].start; port->irq = pdev->resource[1].start; if (port->mapbase == AT91_VA_BASE_SYS + AT91_DBGU) /* Part of system perpherals - already mapped */ port->membase = (void __iomem *) port->mapbase; else { port->flags |= UPF_IOREMAP; port->membase = NULL; } if (!at91_port->clk) { /* for console, the clock could already be configured */ at91_port->clk = clk_get(&pdev->dev, "usart"); clk_enable(at91_port->clk); port->uartclk = clk_get_rate(at91_port->clk); } } /* * Register board-specific modem-control line handlers. */ void __init at91_register_uart_fns(struct at91_port_fns *fns) { if (fns->enable_ms) at91_pops.enable_ms = fns->enable_ms; if (fns->get_mctrl) at91_pops.get_mctrl = fns->get_mctrl; if (fns->set_mctrl) at91_pops.set_mctrl = fns->set_mctrl; at91_open = fns->open; at91_close = fns->close; at91_pops.pm = fns->pm; at91_pops.set_wake = fns->set_wake; } #ifdef CONFIG_SERIAL_AT91_CONSOLE static void at91_console_putchar(struct uart_port *port, int ch) { while (!(UART_GET_CSR(port) & AT91_US_TXRDY)) barrier(); UART_PUT_CHAR(port, ch); } /* * Interrupts are disabled on entering */ static void at91_console_write(struct console *co, const char *s, u_int count) { struct uart_port *port = &at91_ports[co->index].uart; unsigned int status, imr; /* * First, save IMR and then disable interrupts */ imr = UART_GET_IMR(port); /* get interrupt mask */ UART_PUT_IDR(port, AT91_US_RXRDY | AT91_US_TXRDY); uart_console_write(port, s, count, at91_console_putchar); /* * Finally, wait for transmitter to become empty * and restore IMR */ do { status = UART_GET_CSR(port); } while (!(status & AT91_US_TXRDY)); UART_PUT_IER(port, imr); /* set interrupts back the way they were */ } /* * If the port was already initialised (eg, by a boot loader), try to determine * the current setup. */ static void __init at91_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits) { unsigned int mr, quot; // TODO: CR is a write-only register // unsigned int cr; // // cr = UART_GET_CR(port) & (AT91_US_RXEN | AT91_US_TXEN); // if (cr == (AT91_US_RXEN | AT91_US_TXEN)) { // /* ok, the port was enabled */ // } mr = UART_GET_MR(port) & AT91_US_CHRL; if (mr == AT91_US_CHRL_8) *bits = 8; else *bits = 7; mr = UART_GET_MR(port) & AT91_US_PAR; if (mr == AT91_US_PAR_EVEN) *parity = 'e'; else if (mr == AT91_US_PAR_ODD) *parity = 'o'; quot = UART_GET_BRGR(port); *baud = port->uartclk / (16 * (quot)); } static int __init at91_console_setup(struct console *co, char *options) { struct uart_port *port = &at91_ports[co->index].uart; int baud = 115200; int bits = 8; int parity = 'n'; int flow = 'n'; if (port->membase == 0) /* Port not initialized yet - delay setup */ return -ENODEV; UART_PUT_IDR(port, -1); /* disable interrupts */ UART_PUT_CR(port, AT91_US_RSTSTA | AT91_US_RSTRX); UART_PUT_CR(port, AT91_US_TXEN | AT91_US_RXEN); if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); else at91_console_get_options(port, &baud, &parity, &bits); return uart_set_options(port, co, baud, parity, bits, flow); } static struct uart_driver at91_uart; static struct console at91_console = { .name = AT91_DEVICENAME, .write = at91_console_write, .device = uart_console_device, .setup = at91_console_setup, .flags = CON_PRINTBUFFER, .index = -1, .data = &at91_uart, }; #define AT91_CONSOLE_DEVICE &at91_console /* * Early console initialization (before VM subsystem initialized). */ static int __init at91_console_init(void) { if (at91_default_console_device) { add_preferred_console(AT91_DEVICENAME, at91_default_console_device->id, NULL); at91_init_port(&(at91_ports[at91_default_console_device->id]), at91_default_console_device); register_console(&at91_console); } return 0; } console_initcall(at91_console_init); /* * Late console initialization. */ static int __init at91_late_console_init(void) { if (at91_default_console_device && !(at91_console.flags & CON_ENABLED)) register_console(&at91_console); return 0; } core_initcall(at91_late_console_init); #else #define AT91_CONSOLE_DEVICE NULL #endif static struct uart_driver at91_uart = { .owner = THIS_MODULE, .driver_name = "at91_serial", .dev_name = AT91_DEVICENAME, .major = SERIAL_AT91_MAJOR, .minor = MINOR_START, .nr = AT91_NR_UART, .cons = AT91_CONSOLE_DEVICE, }; #ifdef CONFIG_PM static int at91_serial_suspend(struct platform_device *pdev, pm_message_t state) { struct uart_port *port = platform_get_drvdata(pdev); struct at91_uart_port *at91_port = (struct at91_uart_port *) port; if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock()) enable_irq_wake(port->irq); else { disable_irq_wake(port->irq); uart_suspend_port(&at91_uart, port); at91_port->suspended = 1; } return 0; } static int at91_serial_resume(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); struct at91_uart_port *at91_port = (struct at91_uart_port *) port; if (at91_port->suspended) { uart_resume_port(&at91_uart, port); at91_port->suspended = 0; } return 0; } #else #define at91_serial_suspend NULL #define at91_serial_resume NULL #endif static int __devinit at91_serial_probe(struct platform_device *pdev) { struct at91_uart_port *port; int ret; port = &at91_ports[pdev->id]; at91_init_port(port, pdev); ret = uart_add_one_port(&at91_uart, &port->uart); if (!ret) { device_init_wakeup(&pdev->dev, 1); platform_set_drvdata(pdev, port); } return ret; } static int __devexit at91_serial_remove(struct platform_device *pdev) { struct uart_port *port = platform_get_drvdata(pdev); struct at91_uart_port *at91_port = (struct at91_uart_port *) port; int ret = 0; clk_disable(at91_port->clk); clk_put(at91_port->clk); device_init_wakeup(&pdev->dev, 0); platform_set_drvdata(pdev, NULL); if (port) { ret = uart_remove_one_port(&at91_uart, port); kfree(port); } return ret; } static struct platform_driver at91_serial_driver = { .probe = at91_serial_probe, .remove = __devexit_p(at91_serial_remove), .suspend = at91_serial_suspend, .resume = at91_serial_resume, .driver = { .name = "at91_usart", .owner = THIS_MODULE, }, }; static int __init at91_serial_init(void) { int ret; ret = uart_register_driver(&at91_uart); if (ret) return ret; ret = platform_driver_register(&at91_serial_driver); if (ret) uart_unregister_driver(&at91_uart); return ret; } static void __exit at91_serial_exit(void) { platform_driver_unregister(&at91_serial_driver); uart_unregister_driver(&at91_uart); } module_init(at91_serial_init); module_exit(at91_serial_exit); MODULE_AUTHOR("Rick Bronson"); MODULE_DESCRIPTION("AT91 generic serial port driver"); MODULE_LICENSE("GPL");