/* NCR53C9x.c: Defines and structures for the NCR53C9x generic driver. * * Originaly esp.h: Defines and structures for the Sparc ESP * (Enhanced SCSI Processor) driver under Linux. * * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) * * Generalization by Jesper Skov (jskov@cygnus.co.uk) * * More generalization (for i386 stuff) by Tymm Twillman (tymm@computer.org) */ #ifndef NCR53C9X_H #define NCR53C9X_H #include <linux/config.h> #include <linux/interrupt.h> /* djweis for mac driver */ #if defined(CONFIG_MAC) #define PAD_SIZE 15 #else #define PAD_SIZE 3 #endif /* Handle multiple hostadapters on Amiga * generally PAD_SIZE = 3 * but there is one exception: Oktagon (PAD_SIZE = 1) */ #if defined(CONFIG_OKTAGON_SCSI) || defined(CONFIG_OKTAGON_SCSI_MODULE) #undef PAD_SIZE #if defined(CONFIG_BLZ1230_SCSI) || defined(CONFIG_BLZ1230_SCSI_MODULE) || \ defined(CONFIG_BLZ2060_SCSI) || defined(CONFIG_BLZ2060_SCSI_MODULE) || \ defined(CONFIG_CYBERSTORM_SCSI) || defined(CONFIG_CYBERSTORM_SCSI_MODULE) || \ defined(CONFIG_CYBERSTORMII_SCSI) || defined(CONFIG_CYBERSTORMII_SCSI_MODULE) || \ defined(CONFIG_FASTLANE_SCSI) || defined(CONFIG_FASTLANE_SCSI_MODULE) #define MULTIPLE_PAD_SIZES #else #define PAD_SIZE 1 #endif #endif /* Macros for debugging messages */ #define DEBUG_ESP /* #define DEBUG_ESP_DATA */ /* #define DEBUG_ESP_QUEUE */ /* #define DEBUG_ESP_DISCONNECT */ /* #define DEBUG_ESP_STATUS */ /* #define DEBUG_ESP_PHASES */ /* #define DEBUG_ESP_WORKBUS */ /* #define DEBUG_STATE_MACHINE */ /* #define DEBUG_ESP_CMDS */ /* #define DEBUG_ESP_IRQS */ /* #define DEBUG_SDTR */ /* #define DEBUG_ESP_SG */ /* Use the following to sprinkle debugging messages in a way which * suits you if combinations of the above become too verbose when * trying to track down a specific problem. */ /* #define DEBUG_ESP_MISC */ #if defined(DEBUG_ESP) #define ESPLOG(foo) printk foo #else #define ESPLOG(foo) #endif /* (DEBUG_ESP) */ #if defined(DEBUG_ESP_DATA) #define ESPDATA(foo) printk foo #else #define ESPDATA(foo) #endif #if defined(DEBUG_ESP_QUEUE) #define ESPQUEUE(foo) printk foo #else #define ESPQUEUE(foo) #endif #if defined(DEBUG_ESP_DISCONNECT) #define ESPDISC(foo) printk foo #else #define ESPDISC(foo) #endif #if defined(DEBUG_ESP_STATUS) #define ESPSTAT(foo) printk foo #else #define ESPSTAT(foo) #endif #if defined(DEBUG_ESP_PHASES) #define ESPPHASE(foo) printk foo #else #define ESPPHASE(foo) #endif #if defined(DEBUG_ESP_WORKBUS) #define ESPBUS(foo) printk foo #else #define ESPBUS(foo) #endif #if defined(DEBUG_ESP_IRQS) #define ESPIRQ(foo) printk foo #else #define ESPIRQ(foo) #endif #if defined(DEBUG_SDTR) #define ESPSDTR(foo) printk foo #else #define ESPSDTR(foo) #endif #if defined(DEBUG_ESP_MISC) #define ESPMISC(foo) printk foo #else #define ESPMISC(foo) #endif /* * padding for register structure */ #ifdef CONFIG_JAZZ_ESP #define EREGS_PAD(n) #else #ifndef MULTIPLE_PAD_SIZES #define EREGS_PAD(n) unchar n[PAD_SIZE]; #endif #endif /* The ESP SCSI controllers have their register sets in three * "classes": * * 1) Registers which are both read and write. * 2) Registers which are read only. * 3) Registers which are write only. * * Yet, they all live within the same IO space. */ #if !defined(__i386__) && !defined(__x86_64__) #ifndef MULTIPLE_PAD_SIZES #ifdef CONFIG_CPU_HAS_WB #include <asm/wbflush.h> #define esp_write(__reg, __val) do{(__reg) = (__val); wbflush();} while(0) #else #define esp_write(__reg, __val) ((__reg) = (__val)) #endif #define esp_read(__reg) (__reg) struct ESP_regs { /* Access Description Offset */ volatile unchar esp_tclow; /* rw Low bits of the transfer count 0x00 */ EREGS_PAD(tlpad1); volatile unchar esp_tcmed; /* rw Mid bits of the transfer count 0x04 */ EREGS_PAD(fdpad); volatile unchar esp_fdata; /* rw FIFO data bits 0x08 */ EREGS_PAD(cbpad); volatile unchar esp_cmnd; /* rw SCSI command bits 0x0c */ EREGS_PAD(stpad); volatile unchar esp_status; /* ro ESP status register 0x10 */ #define esp_busid esp_status /* wo Bus ID for select/reselect 0x10 */ EREGS_PAD(irqpd); volatile unchar esp_intrpt; /* ro Kind of interrupt 0x14 */ #define esp_timeo esp_intrpt /* wo Timeout value for select/resel 0x14 */ EREGS_PAD(sspad); volatile unchar esp_sstep; /* ro Sequence step register 0x18 */ #define esp_stp esp_sstep /* wo Transfer period per sync 0x18 */ EREGS_PAD(ffpad); volatile unchar esp_fflags; /* ro Bits of current FIFO info 0x1c */ #define esp_soff esp_fflags /* wo Sync offset 0x1c */ EREGS_PAD(cf1pd); volatile unchar esp_cfg1; /* rw First configuration register 0x20 */ EREGS_PAD(cfpad); volatile unchar esp_cfact; /* wo Clock conversion factor 0x24 */ EREGS_PAD(ctpad); volatile unchar esp_ctest; /* wo Chip test register 0x28 */ EREGS_PAD(cf2pd); volatile unchar esp_cfg2; /* rw Second configuration register 0x2c */ EREGS_PAD(cf3pd); /* The following is only found on the 53C9X series SCSI chips */ volatile unchar esp_cfg3; /* rw Third configuration register 0x30 */ EREGS_PAD(cf4pd); volatile unchar esp_cfg4; /* rw Fourth configuration register 0x34 */ EREGS_PAD(thpd); /* The following is found on all chips except the NCR53C90 (ESP100) */ volatile unchar esp_tchi; /* rw High bits of transfer count 0x38 */ #define esp_uid esp_tchi /* ro Unique ID code 0x38 */ EREGS_PAD(fgpad); volatile unchar esp_fgrnd; /* rw Data base for fifo 0x3c */ }; #else /* MULTIPLE_PAD_SIZES */ #define esp_write(__reg, __val) (*(__reg) = (__val)) #define esp_read(__reg) (*(__reg)) struct ESP_regs { unsigned char io_addr[64]; /* dummy */ /* Access Description Offset */ #define esp_tclow io_addr /* rw Low bits of the transfer count 0x00 */ #define esp_tcmed io_addr + (1<<(esp->shift)) /* rw Mid bits of the transfer count 0x04 */ #define esp_fdata io_addr + (2<<(esp->shift)) /* rw FIFO data bits 0x08 */ #define esp_cmnd io_addr + (3<<(esp->shift)) /* rw SCSI command bits 0x0c */ #define esp_status io_addr + (4<<(esp->shift)) /* ro ESP status register 0x10 */ #define esp_busid esp_status /* wo Bus ID for select/reselect 0x10 */ #define esp_intrpt io_addr + (5<<(esp->shift)) /* ro Kind of interrupt 0x14 */ #define esp_timeo esp_intrpt /* wo Timeout value for select/resel 0x14 */ #define esp_sstep io_addr + (6<<(esp->shift)) /* ro Sequence step register 0x18 */ #define esp_stp esp_sstep /* wo Transfer period per sync 0x18 */ #define esp_fflags io_addr + (7<<(esp->shift)) /* ro Bits of current FIFO info 0x1c */ #define esp_soff esp_fflags /* wo Sync offset 0x1c */ #define esp_cfg1 io_addr + (8<<(esp->shift)) /* rw First configuration register 0x20 */ #define esp_cfact io_addr + (9<<(esp->shift)) /* wo Clock conversion factor 0x24 */ #define esp_ctest io_addr + (10<<(esp->shift)) /* wo Chip test register 0x28 */ #define esp_cfg2 io_addr + (11<<(esp->shift)) /* rw Second configuration register 0x2c */ /* The following is only found on the 53C9X series SCSI chips */ #define esp_cfg3 io_addr + (12<<(esp->shift)) /* rw Third configuration register 0x30 */ #define esp_cfg4 io_addr + (13<<(esp->shift)) /* rw Fourth configuration register 0x34 */ /* The following is found on all chips except the NCR53C90 (ESP100) */ #define esp_tchi io_addr + (14<<(esp->shift)) /* rw High bits of transfer count 0x38 */ #define esp_uid esp_tchi /* ro Unique ID code 0x38 */ #define esp_fgrnd io_addr + (15<<(esp->shift)) /* rw Data base for fifo 0x3c */ }; #endif #else /* !defined(__i386__) && !defined(__x86_64__) */ #define esp_write(__reg, __val) outb((__val), (__reg)) #define esp_read(__reg) inb((__reg)) struct ESP_regs { unsigned int io_addr; /* Access Description Offset */ #define esp_tclow io_addr /* rw Low bits of the transfer count 0x00 */ #define esp_tcmed io_addr + 1 /* rw Mid bits of the transfer count 0x04 */ #define esp_fdata io_addr + 2 /* rw FIFO data bits 0x08 */ #define esp_cmnd io_addr + 3 /* rw SCSI command bits 0x0c */ #define esp_status io_addr + 4 /* ro ESP status register 0x10 */ #define esp_busid esp_status /* wo Bus ID for select/reselect 0x10 */ #define esp_intrpt io_addr + 5 /* ro Kind of interrupt 0x14 */ #define esp_timeo esp_intrpt /* wo Timeout value for select/resel 0x14 */ #define esp_sstep io_addr + 6 /* ro Sequence step register 0x18 */ #define esp_stp esp_sstep /* wo Transfer period per sync 0x18 */ #define esp_fflags io_addr + 7 /* ro Bits of current FIFO info 0x1c */ #define esp_soff esp_fflags /* wo Sync offset 0x1c */ #define esp_cfg1 io_addr + 8 /* rw First configuration register 0x20 */ #define esp_cfact io_addr + 9 /* wo Clock conversion factor 0x24 */ #define esp_ctest io_addr + 10 /* wo Chip test register 0x28 */ #define esp_cfg2 io_addr + 11 /* rw Second configuration register 0x2c */ /* The following is only found on the 53C9X series SCSI chips */ #define esp_cfg3 io_addr + 12 /* rw Third configuration register 0x30 */ #define esp_cfg4 io_addr + 13 /* rw Fourth configuration register 0x34 */ /* The following is found on all chips except the NCR53C90 (ESP100) */ #define esp_tchi io_addr + 14 /* rw High bits of transfer count 0x38 */ #define esp_uid esp_tchi /* ro Unique ID code 0x38 */ #define esp_fgrnd io_addr + 15 /* rw Data base for fifo 0x3c */ }; #endif /* !defined(__i386__) && !defined(__x86_64__) */ /* Various revisions of the ESP board. */ enum esp_rev { esp100 = 0x00, /* NCR53C90 - very broken */ esp100a = 0x01, /* NCR53C90A */ esp236 = 0x02, fas236 = 0x03, fas100a = 0x04, fast = 0x05, fas366 = 0x06, fas216 = 0x07, fsc = 0x08, /* SYM53C94-2 */ espunknown = 0x09 }; /* We allocate one of these for each scsi device and attach it to * SDptr->hostdata for use in the driver */ struct esp_device { unsigned char sync_min_period; unsigned char sync_max_offset; unsigned sync:1; unsigned wide:1; unsigned disconnect:1; }; /* We get one of these for each ESP probed. */ struct NCR_ESP { struct NCR_ESP *next; /* Next ESP on probed or NULL */ struct ESP_regs *eregs; /* All esp registers */ int dma; /* Who I do transfers with. */ void *dregs; /* And his registers. */ struct Scsi_Host *ehost; /* Backpointer to SCSI Host */ void *edev; /* Pointer to controller base/SBus */ int esp_id; /* Unique per-ESP ID number */ /* ESP Configuration Registers */ unsigned char config1; /* Copy of the 1st config register */ unsigned char config2; /* Copy of the 2nd config register */ unsigned char config3[16]; /* Copy of the 3rd config register */ /* The current command we are sending to the ESP chip. This esp_command * ptr needs to be mapped in DVMA area so we can send commands and read * from the ESP fifo without burning precious CPU cycles. Programmed I/O * sucks when we have the DVMA to do it for us. The ESP is stupid and will * only send out 6, 10, and 12 byte SCSI commands, others we need to send * one byte at a time. esp_slowcmd being set says that we are doing one * of the command types ESP doesn't understand, esp_scmdp keeps track of * which byte we are sending, esp_scmdleft says how many bytes to go. */ volatile unchar *esp_command; /* Location of command (CPU view) */ __u32 esp_command_dvma; /* Location of command (DVMA view) */ unsigned char esp_clen; /* Length of this command */ unsigned char esp_slowcmd; unsigned char *esp_scmdp; unsigned char esp_scmdleft; /* The following are used to determine the cause of an IRQ. Upon every * IRQ entry we synchronize these with the hardware registers. */ unchar ireg; /* Copy of ESP interrupt register */ unchar sreg; /* Same for ESP status register */ unchar seqreg; /* The ESP sequence register */ /* The following is set when a premature interrupt condition is detected * in some FAS revisions. */ unchar fas_premature_intr_workaround; /* To save register writes to the ESP, which can be expensive, we * keep track of the previous value that various registers had for * the last target we connected to. If they are the same for the * current target, we skip the register writes as they are not needed. */ unchar prev_soff, prev_stp, prev_cfg3; /* For each target we keep track of save/restore data * pointer information. This needs to be updated majorly * when we add support for tagged queueing. -DaveM */ struct esp_pointers { char *saved_ptr; struct scatterlist *saved_buffer; int saved_this_residual; int saved_buffers_residual; } data_pointers[16] /*XXX [MAX_TAGS_PER_TARGET]*/; /* Clock periods, frequencies, synchronization, etc. */ unsigned int cfreq; /* Clock frequency in HZ */ unsigned int cfact; /* Clock conversion factor */ unsigned int ccycle; /* One ESP clock cycle */ unsigned int ctick; /* One ESP clock time */ unsigned int radelay; /* FAST chip req/ack delay */ unsigned int neg_defp; /* Default negotiation period */ unsigned int sync_defp; /* Default sync transfer period */ unsigned int max_period; /* longest our period can be */ unsigned int min_period; /* shortest period we can withstand */ /* For slow to medium speed input clock rates we shoot for 5mb/s, * but for high input clock rates we try to do 10mb/s although I * don't think a transfer can even run that fast with an ESP even * with DMA2 scatter gather pipelining. */ #define SYNC_DEFP_SLOW 0x32 /* 5mb/s */ #define SYNC_DEFP_FAST 0x19 /* 10mb/s */ unsigned int snip; /* Sync. negotiation in progress */ unsigned int wnip; /* WIDE negotiation in progress */ unsigned int targets_present; /* targets spoken to before */ int current_transfer_size; /* Set at beginning of data dma */ unchar espcmdlog[32]; /* Log of current esp cmds sent. */ unchar espcmdent; /* Current entry in esp cmd log. */ /* Misc. info about this ESP */ enum esp_rev erev; /* ESP revision */ int irq; /* IRQ for this ESP */ int scsi_id; /* Who am I as initiator? */ int scsi_id_mask; /* Bitmask of 'me'. */ int diff; /* Differential SCSI bus? */ int slot; /* Slot the adapter occupies */ /* Our command queues, only one cmd lives in the current_SC queue. */ Scsi_Cmnd *issue_SC; /* Commands to be issued */ Scsi_Cmnd *current_SC; /* Who is currently working the bus */ Scsi_Cmnd *disconnected_SC; /* Commands disconnected from the bus */ /* Message goo */ unchar cur_msgout[16]; unchar cur_msgin[16]; unchar prevmsgout, prevmsgin; unchar msgout_len, msgin_len; unchar msgout_ctr, msgin_ctr; /* States that we cannot keep in the per cmd structure because they * cannot be assosciated with any specific command. */ unchar resetting_bus; wait_queue_head_t reset_queue; unchar do_pio_cmds; /* Do command transfer with pio */ /* How much bits do we have to shift the registers */ unsigned char shift; /* Functions handling DMA */ /* Required functions */ int (*dma_bytes_sent)(struct NCR_ESP *, int); int (*dma_can_transfer)(struct NCR_ESP *, Scsi_Cmnd *); void (*dma_dump_state)(struct NCR_ESP *); void (*dma_init_read)(struct NCR_ESP *, __u32, int); void (*dma_init_write)(struct NCR_ESP *, __u32, int); void (*dma_ints_off)(struct NCR_ESP *); void (*dma_ints_on)(struct NCR_ESP *); int (*dma_irq_p)(struct NCR_ESP *); int (*dma_ports_p)(struct NCR_ESP *); void (*dma_setup)(struct NCR_ESP *, __u32, int, int); /* Optional functions (i.e. may be initialized to 0) */ void (*dma_barrier)(struct NCR_ESP *); void (*dma_drain)(struct NCR_ESP *); void (*dma_invalidate)(struct NCR_ESP *); void (*dma_irq_entry)(struct NCR_ESP *); void (*dma_irq_exit)(struct NCR_ESP *); void (*dma_led_off)(struct NCR_ESP *); void (*dma_led_on)(struct NCR_ESP *); void (*dma_poll)(struct NCR_ESP *, unsigned char *); void (*dma_reset)(struct NCR_ESP *); /* Optional virtual DMA functions */ void (*dma_mmu_get_scsi_one)(struct NCR_ESP *, Scsi_Cmnd *); void (*dma_mmu_get_scsi_sgl)(struct NCR_ESP *, Scsi_Cmnd *); void (*dma_mmu_release_scsi_one)(struct NCR_ESP *, Scsi_Cmnd *); void (*dma_mmu_release_scsi_sgl)(struct NCR_ESP *, Scsi_Cmnd *); void (*dma_advance_sg)(Scsi_Cmnd *); }; /* Bitfield meanings for the above registers. */ /* ESP config reg 1, read-write, found on all ESP chips */ #define ESP_CONFIG1_ID 0x07 /* My BUS ID bits */ #define ESP_CONFIG1_CHTEST 0x08 /* Enable ESP chip tests */ #define ESP_CONFIG1_PENABLE 0x10 /* Enable parity checks */ #define ESP_CONFIG1_PARTEST 0x20 /* Parity test mode enabled? */ #define ESP_CONFIG1_SRRDISAB 0x40 /* Disable SCSI reset reports */ #define ESP_CONFIG1_SLCABLE 0x80 /* Enable slow cable mode */ /* ESP config reg 2, read-write, found only on esp100a+esp200+esp236+fsc chips */ #define ESP_CONFIG2_DMAPARITY 0x01 /* enable DMA Parity (200,236,fsc) */ #define ESP_CONFIG2_REGPARITY 0x02 /* enable reg Parity (200,236,fsc) */ #define ESP_CONFIG2_BADPARITY 0x04 /* Bad parity target abort */ #define ESP_CONFIG2_SCSI2ENAB 0x08 /* Enable SCSI-2 features (tmode only) */ #define ESP_CONFIG2_HI 0x10 /* High Impedance DREQ ??? */ #define ESP_CONFIG2_HMEFENAB 0x10 /* HME features enable */ #define ESP_CONFIG2_BCM 0x20 /* Enable byte-ctrl (236,fsc) */ #define ESP_CONFIG2_FENAB 0x40 /* Enable features (fas100,esp216,fsc) */ #define ESP_CONFIG2_SPL 0x40 /* Enable status-phase latch (esp236) */ #define ESP_CONFIG2_RFB 0x80 /* Reserve FIFO byte (fsc) */ #define ESP_CONFIG2_MAGIC 0xe0 /* Invalid bits... */ /* ESP config register 3 read-write, found only esp236+fas236+fas100a+fsc chips */ #define ESP_CONFIG3_FCLOCK 0x01 /* FAST SCSI clock rate (esp100a/fas366) */ #define ESP_CONFIG3_TEM 0x01 /* Enable thresh-8 mode (esp/fas236/fsc) */ #define ESP_CONFIG3_FAST 0x02 /* Enable FAST SCSI (esp100a) */ #define ESP_CONFIG3_ADMA 0x02 /* Enable alternate-dma (esp/fas236/fsc) */ #define ESP_CONFIG3_TENB 0x04 /* group2 SCSI2 support (esp100a) */ #define ESP_CONFIG3_SRB 0x04 /* Save residual byte (esp/fas236/fsc) */ #define ESP_CONFIG3_TMS 0x08 /* Three-byte msg's ok (esp100a) */ #define ESP_CONFIG3_FCLK 0x08 /* Fast SCSI clock rate (esp/fas236/fsc) */ #define ESP_CONFIG3_IDMSG 0x10 /* ID message checking (esp100a) */ #define ESP_CONFIG3_FSCSI 0x10 /* Enable FAST SCSI (esp/fas236/fsc) */ #define ESP_CONFIG3_GTM 0x20 /* group2 SCSI2 support (esp/fas236/fsc) */ #define ESP_CONFIG3_TBMS 0x40 /* Three-byte msg's ok (esp/fas236/fsc) */ #define ESP_CONFIG3_IMS 0x80 /* ID msg chk'ng (esp/fas236/fsc) */ /* ESP config register 4 read-write, found only on fsc chips */ #define ESP_CONFIG4_BBTE 0x01 /* Back-to-Back transfer enable */ #define ESP_CONFIG4_TEST 0x02 /* Transfer counter test mode */ #define ESP_CONFIG4_EAN 0x04 /* Enable Active Negotiation */ /* ESP command register read-write */ /* Group 1 commands: These may be sent at any point in time to the ESP * chip. None of them can generate interrupts 'cept * the "SCSI bus reset" command if you have not disabled * SCSI reset interrupts in the config1 ESP register. */ #define ESP_CMD_NULL 0x00 /* Null command, ie. a nop */ #define ESP_CMD_FLUSH 0x01 /* FIFO Flush */ #define ESP_CMD_RC 0x02 /* Chip reset */ #define ESP_CMD_RS 0x03 /* SCSI bus reset */ /* Group 2 commands: ESP must be an initiator and connected to a target * for these commands to work. */ #define ESP_CMD_TI 0x10 /* Transfer Information */ #define ESP_CMD_ICCSEQ 0x11 /* Initiator cmd complete sequence */ #define ESP_CMD_MOK 0x12 /* Message okie-dokie */ #define ESP_CMD_TPAD 0x18 /* Transfer Pad */ #define ESP_CMD_SATN 0x1a /* Set ATN */ #define ESP_CMD_RATN 0x1b /* De-assert ATN */ /* Group 3 commands: ESP must be in the MSGOUT or MSGIN state and be connected * to a target as the initiator for these commands to work. */ #define ESP_CMD_SMSG 0x20 /* Send message */ #define ESP_CMD_SSTAT 0x21 /* Send status */ #define ESP_CMD_SDATA 0x22 /* Send data */ #define ESP_CMD_DSEQ 0x23 /* Discontinue Sequence */ #define ESP_CMD_TSEQ 0x24 /* Terminate Sequence */ #define ESP_CMD_TCCSEQ 0x25 /* Target cmd cmplt sequence */ #define ESP_CMD_DCNCT 0x27 /* Disconnect */ #define ESP_CMD_RMSG 0x28 /* Receive Message */ #define ESP_CMD_RCMD 0x29 /* Receive Command */ #define ESP_CMD_RDATA 0x2a /* Receive Data */ #define ESP_CMD_RCSEQ 0x2b /* Receive cmd sequence */ /* Group 4 commands: The ESP must be in the disconnected state and must * not be connected to any targets as initiator for * these commands to work. */ #define ESP_CMD_RSEL 0x40 /* Reselect */ #define ESP_CMD_SEL 0x41 /* Select w/o ATN */ #define ESP_CMD_SELA 0x42 /* Select w/ATN */ #define ESP_CMD_SELAS 0x43 /* Select w/ATN & STOP */ #define ESP_CMD_ESEL 0x44 /* Enable selection */ #define ESP_CMD_DSEL 0x45 /* Disable selections */ #define ESP_CMD_SA3 0x46 /* Select w/ATN3 */ #define ESP_CMD_RSEL3 0x47 /* Reselect3 */ /* This bit enables the ESP's DMA */ #define ESP_CMD_DMA 0x80 /* Do DMA? */ /* ESP status register read-only */ #define ESP_STAT_PIO 0x01 /* IO phase bit */ #define ESP_STAT_PCD 0x02 /* CD phase bit */ #define ESP_STAT_PMSG 0x04 /* MSG phase bit */ #define ESP_STAT_PMASK 0x07 /* Mask of phase bits */ #define ESP_STAT_TDONE 0x08 /* Transfer Completed */ #define ESP_STAT_TCNT 0x10 /* Transfer Counter Is Zero */ #define ESP_STAT_PERR 0x20 /* Parity error */ #define ESP_STAT_SPAM 0x40 /* Real bad error */ /* This indicates the 'interrupt pending' condition, it is a reserved * bit on old revs of the ESP (ESP100, ESP100A, FAS100A). */ #define ESP_STAT_INTR 0x80 /* Interrupt */ /* The status register can be masked with ESP_STAT_PMASK and compared * with the following values to determine the current phase the ESP * (at least thinks it) is in. For our purposes we also add our own * software 'done' bit for our phase management engine. */ #define ESP_DOP (0) /* Data Out */ #define ESP_DIP (ESP_STAT_PIO) /* Data In */ #define ESP_CMDP (ESP_STAT_PCD) /* Command */ #define ESP_STATP (ESP_STAT_PCD|ESP_STAT_PIO) /* Status */ #define ESP_MOP (ESP_STAT_PMSG|ESP_STAT_PCD) /* Message Out */ #define ESP_MIP (ESP_STAT_PMSG|ESP_STAT_PCD|ESP_STAT_PIO) /* Message In */ /* ESP interrupt register read-only */ #define ESP_INTR_S 0x01 /* Select w/o ATN */ #define ESP_INTR_SATN 0x02 /* Select w/ATN */ #define ESP_INTR_RSEL 0x04 /* Reselected */ #define ESP_INTR_FDONE 0x08 /* Function done */ #define ESP_INTR_BSERV 0x10 /* Bus service */ #define ESP_INTR_DC 0x20 /* Disconnect */ #define ESP_INTR_IC 0x40 /* Illegal command given */ #define ESP_INTR_SR 0x80 /* SCSI bus reset detected */ /* Interrupt status macros */ #define ESP_SRESET_IRQ(esp) ((esp)->intreg & (ESP_INTR_SR)) #define ESP_ILLCMD_IRQ(esp) ((esp)->intreg & (ESP_INTR_IC)) #define ESP_SELECT_WITH_ATN_IRQ(esp) ((esp)->intreg & (ESP_INTR_SATN)) #define ESP_SELECT_WITHOUT_ATN_IRQ(esp) ((esp)->intreg & (ESP_INTR_S)) #define ESP_SELECTION_IRQ(esp) ((ESP_SELECT_WITH_ATN_IRQ(esp)) || \ (ESP_SELECT_WITHOUT_ATN_IRQ(esp))) #define ESP_RESELECTION_IRQ(esp) ((esp)->intreg & (ESP_INTR_RSEL)) /* ESP sequence step register read-only */ #define ESP_STEP_VBITS 0x07 /* Valid bits */ #define ESP_STEP_ASEL 0x00 /* Selection&Arbitrate cmplt */ #define ESP_STEP_SID 0x01 /* One msg byte sent */ #define ESP_STEP_NCMD 0x02 /* Was not in command phase */ #define ESP_STEP_PPC 0x03 /* Early phase chg caused cmnd * bytes to be lost */ #define ESP_STEP_FINI4 0x04 /* Command was sent ok */ /* Ho hum, some ESP's set the step register to this as well... */ #define ESP_STEP_FINI5 0x05 #define ESP_STEP_FINI6 0x06 #define ESP_STEP_FINI7 0x07 #define ESP_STEP_SOM 0x08 /* Synchronous Offset Max */ /* ESP chip-test register read-write */ #define ESP_TEST_TARG 0x01 /* Target test mode */ #define ESP_TEST_INI 0x02 /* Initiator test mode */ #define ESP_TEST_TS 0x04 /* Tristate test mode */ /* ESP unique ID register read-only, found on fas236+fas100a+fsc only */ #define ESP_UID_F100A 0x00 /* FAS100A */ #define ESP_UID_F236 0x02 /* FAS236 */ #define ESP_UID_FSC 0xa2 /* NCR53CF9x-2 */ #define ESP_UID_REV 0x07 /* ESP revision */ #define ESP_UID_FAM 0xf8 /* ESP family */ /* ESP fifo flags register read-only */ /* Note that the following implies a 16 byte FIFO on the ESP. */ #define ESP_FF_FBYTES 0x1f /* Num bytes in FIFO */ #define ESP_FF_ONOTZERO 0x20 /* offset ctr not zero (esp100,fsc) */ #define ESP_FF_SSTEP 0xe0 /* Sequence step */ /* ESP clock conversion factor register write-only */ #define ESP_CCF_F0 0x00 /* 35.01MHz - 40MHz */ #define ESP_CCF_NEVER 0x01 /* Set it to this and die */ #define ESP_CCF_F2 0x02 /* 10MHz */ #define ESP_CCF_F3 0x03 /* 10.01MHz - 15MHz */ #define ESP_CCF_F4 0x04 /* 15.01MHz - 20MHz */ #define ESP_CCF_F5 0x05 /* 20.01MHz - 25MHz */ #define ESP_CCF_F6 0x06 /* 25.01MHz - 30MHz */ #define ESP_CCF_F7 0x07 /* 30.01MHz - 35MHz */ #define ESP_BUS_TIMEOUT 275 /* In milli-seconds */ #define ESP_TIMEO_CONST 8192 #define FSC_TIMEO_CONST 7668 #define ESP_NEG_DEFP(mhz, cfact) \ ((ESP_BUS_TIMEOUT * ((mhz) / 1000)) / (8192 * (cfact))) #define FSC_NEG_DEFP(mhz, cfact) \ ((ESP_BUS_TIMEOUT * ((mhz) / 1000)) / (7668 * (cfact))) #define ESP_MHZ_TO_CYCLE(mhertz) ((1000000000) / ((mhertz) / 1000)) #define ESP_TICK(ccf, cycle) ((7682 * (ccf) * (cycle) / 1000)) /* UGLY, UGLY, UGLY! */ extern int nesps, esps_in_use, esps_running; /* For our interrupt engine. */ #define for_each_esp(esp) \ for((esp) = espchain; (esp); (esp) = (esp)->next) /* External functions */ extern void esp_bootup_reset(struct NCR_ESP *esp, struct ESP_regs *eregs); extern struct NCR_ESP *esp_allocate(struct scsi_host_template *, void *); extern void esp_deallocate(struct NCR_ESP *); extern void esp_release(void); extern void esp_initialize(struct NCR_ESP *); extern irqreturn_t esp_intr(int, void *, struct pt_regs *); extern const char *esp_info(struct Scsi_Host *); extern int esp_queue(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *)); extern int esp_abort(Scsi_Cmnd *); extern int esp_reset(Scsi_Cmnd *); extern int esp_proc_info(struct Scsi_Host *shost, char *buffer, char **start, off_t offset, int length, int inout); extern int esp_slave_alloc(struct scsi_device *); extern void esp_slave_destroy(struct scsi_device *); #endif /* !(NCR53C9X_H) */