/****************************************************************************** * * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA * * The full GNU General Public License is included in this distribution in the * file called LICENSE. * * Contact Information: * Intel Linux Wireless * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * *****************************************************************************/ /* * Please use this file (iwl-dev.h) for driver implementation definitions. * Please use iwl-commands.h for uCode API definitions. * Please use iwl-4965-hw.h for hardware-related definitions. */ #ifndef __iwl_dev_h__ #define __iwl_dev_h__ #include /* for struct pci_device_id */ #include #include #include "iwl-eeprom.h" #include "iwl-csr.h" #include "iwl-prph.h" #include "iwl-fh.h" #include "iwl-debug.h" #include "iwl-4965-hw.h" #include "iwl-3945-hw.h" #include "iwl-led.h" #include "iwl-power.h" #include "iwl-agn-rs.h" /* configuration for the iwl4965 */ extern struct iwl_cfg iwl4965_agn_cfg; extern struct iwl_cfg iwl5300_agn_cfg; extern struct iwl_cfg iwl5100_agn_cfg; extern struct iwl_cfg iwl5350_agn_cfg; extern struct iwl_cfg iwl5100_bgn_cfg; extern struct iwl_cfg iwl5100_abg_cfg; extern struct iwl_cfg iwl5150_agn_cfg; extern struct iwl_cfg iwl5150_abg_cfg; extern struct iwl_cfg iwl6000i_2agn_cfg; extern struct iwl_cfg iwl6000i_2abg_cfg; extern struct iwl_cfg iwl6000i_2bg_cfg; extern struct iwl_cfg iwl6000_3agn_cfg; extern struct iwl_cfg iwl6050_2agn_cfg; extern struct iwl_cfg iwl6050_2abg_cfg; extern struct iwl_cfg iwl1000_bgn_cfg; extern struct iwl_cfg iwl1000_bg_cfg; struct iwl_tx_queue; /* shared structures from iwl-5000.c */ extern struct iwl_mod_params iwl50_mod_params; extern struct iwl_ucode_ops iwl5000_ucode; extern struct iwl_lib_ops iwl5000_lib; extern struct iwl_hcmd_ops iwl5000_hcmd; extern struct iwl_hcmd_utils_ops iwl5000_hcmd_utils; /* shared functions from iwl-5000.c */ extern u16 iwl5000_get_hcmd_size(u8 cmd_id, u16 len); extern u16 iwl5000_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data); extern void iwl5000_rts_tx_cmd_flag(struct ieee80211_tx_info *info, __le32 *tx_flags); extern int iwl5000_calc_rssi(struct iwl_priv *priv, struct iwl_rx_phy_res *rx_resp); extern void iwl5000_nic_config(struct iwl_priv *priv); extern u16 iwl5000_eeprom_calib_version(struct iwl_priv *priv); extern const u8 *iwl5000_eeprom_query_addr(const struct iwl_priv *priv, size_t offset); extern void iwl5000_txq_update_byte_cnt_tbl(struct iwl_priv *priv, struct iwl_tx_queue *txq, u16 byte_cnt); extern void iwl5000_txq_inval_byte_cnt_tbl(struct iwl_priv *priv, struct iwl_tx_queue *txq); extern int iwl5000_load_ucode(struct iwl_priv *priv); extern void iwl5000_init_alive_start(struct iwl_priv *priv); extern int iwl5000_alive_notify(struct iwl_priv *priv); extern int iwl5000_hw_set_hw_params(struct iwl_priv *priv); extern int iwl5000_txq_agg_enable(struct iwl_priv *priv, int txq_id, int tx_fifo, int sta_id, int tid, u16 ssn_idx); extern int iwl5000_txq_agg_disable(struct iwl_priv *priv, u16 txq_id, u16 ssn_idx, u8 tx_fifo); extern void iwl5000_txq_set_sched(struct iwl_priv *priv, u32 mask); extern void iwl5000_setup_deferred_work(struct iwl_priv *priv); extern void iwl5000_rx_handler_setup(struct iwl_priv *priv); extern int iwl5000_hw_valid_rtc_data_addr(u32 addr); extern int iwl5000_send_tx_power(struct iwl_priv *priv); extern void iwl5000_temperature(struct iwl_priv *priv); /* CT-KILL constants */ #define CT_KILL_THRESHOLD_LEGACY 110 /* in Celsius */ #define CT_KILL_THRESHOLD 114 /* in Celsius */ #define CT_KILL_EXIT_THRESHOLD 95 /* in Celsius */ /* Default noise level to report when noise measurement is not available. * This may be because we're: * 1) Not associated (4965, no beacon statistics being sent to driver) * 2) Scanning (noise measurement does not apply to associated channel) * 3) Receiving CCK (3945 delivers noise info only for OFDM frames) * Use default noise value of -127 ... this is below the range of measurable * Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user. * Also, -127 works better than 0 when averaging frames with/without * noise info (e.g. averaging might be done in app); measured dBm values are * always negative ... using a negative value as the default keeps all * averages within an s8's (used in some apps) range of negative values. */ #define IWL_NOISE_MEAS_NOT_AVAILABLE (-127) /* * RTS threshold here is total size [2347] minus 4 FCS bytes * Per spec: * a value of 0 means RTS on all data/management packets * a value > max MSDU size means no RTS * else RTS for data/management frames where MPDU is larger * than RTS value. */ #define DEFAULT_RTS_THRESHOLD 2347U #define MIN_RTS_THRESHOLD 0U #define MAX_RTS_THRESHOLD 2347U #define MAX_MSDU_SIZE 2304U #define MAX_MPDU_SIZE 2346U #define DEFAULT_BEACON_INTERVAL 100U #define DEFAULT_SHORT_RETRY_LIMIT 7U #define DEFAULT_LONG_RETRY_LIMIT 4U struct iwl_rx_mem_buffer { dma_addr_t page_dma; struct page *page; struct list_head list; }; #define rxb_addr(r) page_address(r->page) /* defined below */ struct iwl_device_cmd; struct iwl_cmd_meta { /* only for SYNC commands, iff the reply skb is wanted */ struct iwl_host_cmd *source; /* * only for ASYNC commands * (which is somewhat stupid -- look at iwl-sta.c for instance * which duplicates a bunch of code because the callback isn't * invoked for SYNC commands, if it were and its result passed * through it would be simpler...) */ void (*callback)(struct iwl_priv *priv, struct iwl_device_cmd *cmd, struct iwl_rx_packet *pkt); /* The CMD_SIZE_HUGE flag bit indicates that the command * structure is stored at the end of the shared queue memory. */ u32 flags; DECLARE_PCI_UNMAP_ADDR(mapping) DECLARE_PCI_UNMAP_LEN(len) }; /* * Generic queue structure * * Contains common data for Rx and Tx queues */ struct iwl_queue { int n_bd; /* number of BDs in this queue */ int write_ptr; /* 1-st empty entry (index) host_w*/ int read_ptr; /* last used entry (index) host_r*/ dma_addr_t dma_addr; /* physical addr for BD's */ int n_window; /* safe queue window */ u32 id; int low_mark; /* low watermark, resume queue if free * space more than this */ int high_mark; /* high watermark, stop queue if free * space less than this */ } __attribute__ ((packed)); /* One for each TFD */ struct iwl_tx_info { struct sk_buff *skb[IWL_NUM_OF_TBS - 1]; }; /** * struct iwl_tx_queue - Tx Queue for DMA * @q: generic Rx/Tx queue descriptor * @bd: base of circular buffer of TFDs * @cmd: array of command/TX buffer pointers * @meta: array of meta data for each command/tx buffer * @dma_addr_cmd: physical address of cmd/tx buffer array * @txb: array of per-TFD driver data * @need_update: indicates need to update read/write index * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled * * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame * descriptors) and required locking structures. */ #define TFD_TX_CMD_SLOTS 256 #define TFD_CMD_SLOTS 32 struct iwl_tx_queue { struct iwl_queue q; void *tfds; struct iwl_device_cmd **cmd; struct iwl_cmd_meta *meta; struct iwl_tx_info *txb; u8 need_update; u8 sched_retry; u8 active; u8 swq_id; }; #define IWL_NUM_SCAN_RATES (2) struct iwl4965_channel_tgd_info { u8 type; s8 max_power; }; struct iwl4965_channel_tgh_info { s64 last_radar_time; }; #define IWL4965_MAX_RATE (33) struct iwl3945_clip_group { /* maximum power level to prevent clipping for each rate, derived by * us from this band's saturation power in EEPROM */ const s8 clip_powers[IWL_MAX_RATES]; }; /* current Tx power values to use, one for each rate for each channel. * requested power is limited by: * -- regulatory EEPROM limits for this channel * -- hardware capabilities (clip-powers) * -- spectrum management * -- user preference (e.g. iwconfig) * when requested power is set, base power index must also be set. */ struct iwl3945_channel_power_info { struct iwl3945_tx_power tpc; /* actual radio and DSP gain settings */ s8 power_table_index; /* actual (compenst'd) index into gain table */ s8 base_power_index; /* gain index for power at factory temp. */ s8 requested_power; /* power (dBm) requested for this chnl/rate */ }; /* current scan Tx power values to use, one for each scan rate for each * channel. */ struct iwl3945_scan_power_info { struct iwl3945_tx_power tpc; /* actual radio and DSP gain settings */ s8 power_table_index; /* actual (compenst'd) index into gain table */ s8 requested_power; /* scan pwr (dBm) requested for chnl/rate */ }; /* * One for each channel, holds all channel setup data * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant * with one another! */ struct iwl_channel_info { struct iwl4965_channel_tgd_info tgd; struct iwl4965_channel_tgh_info tgh; struct iwl_eeprom_channel eeprom; /* EEPROM regulatory limit */ struct iwl_eeprom_channel ht40_eeprom; /* EEPROM regulatory limit for * HT40 channel */ u8 channel; /* channel number */ u8 flags; /* flags copied from EEPROM */ s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */ s8 curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) limit */ s8 min_power; /* always 0 */ s8 scan_power; /* (dBm) regul. eeprom, direct scans, any rate */ u8 group_index; /* 0-4, maps channel to group1/2/3/4/5 */ u8 band_index; /* 0-4, maps channel to band1/2/3/4/5 */ enum ieee80211_band band; /* HT40 channel info */ s8 ht40_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */ u8 ht40_flags; /* flags copied from EEPROM */ u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */ /* Radio/DSP gain settings for each "normal" data Tx rate. * These include, in addition to RF and DSP gain, a few fields for * remembering/modifying gain settings (indexes). */ struct iwl3945_channel_power_info power_info[IWL4965_MAX_RATE]; /* Radio/DSP gain settings for each scan rate, for directed scans. */ struct iwl3945_scan_power_info scan_pwr_info[IWL_NUM_SCAN_RATES]; }; #define IWL_TX_FIFO_AC0 0 #define IWL_TX_FIFO_AC1 1 #define IWL_TX_FIFO_AC2 2 #define IWL_TX_FIFO_AC3 3 #define IWL_TX_FIFO_HCCA_1 5 #define IWL_TX_FIFO_HCCA_2 6 #define IWL_TX_FIFO_NONE 7 /* Minimum number of queues. MAX_NUM is defined in hw specific files. * Set the minimum to accommodate the 4 standard TX queues, 1 command * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */ #define IWL_MIN_NUM_QUEUES 10 /* * Queue #4 is the command queue for 3945/4965/5x00/1000/6x00, * the driver maps it into the appropriate device FIFO for the * uCode. */ #define IWL_CMD_QUEUE_NUM 4 /* Power management (not Tx power) structures */ enum iwl_pwr_src { IWL_PWR_SRC_VMAIN, IWL_PWR_SRC_VAUX, }; #define IEEE80211_DATA_LEN 2304 #define IEEE80211_4ADDR_LEN 30 #define IEEE80211_HLEN (IEEE80211_4ADDR_LEN) #define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) struct iwl_frame { union { struct ieee80211_hdr frame; struct iwl_tx_beacon_cmd beacon; u8 raw[IEEE80211_FRAME_LEN]; u8 cmd[360]; } u; struct list_head list; }; #define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4) #define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ) #define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4) enum { CMD_SYNC = 0, CMD_SIZE_NORMAL = 0, CMD_NO_SKB = 0, CMD_SIZE_HUGE = (1 << 0), CMD_ASYNC = (1 << 1), CMD_WANT_SKB = (1 << 2), }; #define DEF_CMD_PAYLOAD_SIZE 320 /* * IWL_LINK_HDR_MAX should include ieee80211_hdr, radiotap header, * SNAP header and alignment. It should also be big enough for 802.11 * control frames. */ #define IWL_LINK_HDR_MAX 64 /** * struct iwl_device_cmd * * For allocation of the command and tx queues, this establishes the overall * size of the largest command we send to uCode, except for a scan command * (which is relatively huge; space is allocated separately). */ struct iwl_device_cmd { struct iwl_cmd_header hdr; /* uCode API */ union { u32 flags; u8 val8; u16 val16; u32 val32; struct iwl_tx_cmd tx; struct iwl6000_channel_switch_cmd chswitch; u8 payload[DEF_CMD_PAYLOAD_SIZE]; } __attribute__ ((packed)) cmd; } __attribute__ ((packed)); #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd)) struct iwl_host_cmd { const void *data; unsigned long reply_page; void (*callback)(struct iwl_priv *priv, struct iwl_device_cmd *cmd, struct iwl_rx_packet *pkt); u32 flags; u16 len; u8 id; }; #define SUP_RATE_11A_MAX_NUM_CHANNELS 8 #define SUP_RATE_11B_MAX_NUM_CHANNELS 4 #define SUP_RATE_11G_MAX_NUM_CHANNELS 12 /** * struct iwl_rx_queue - Rx queue * @bd: driver's pointer to buffer of receive buffer descriptors (rbd) * @dma_addr: bus address of buffer of receive buffer descriptors (rbd) * @read: Shared index to newest available Rx buffer * @write: Shared index to oldest written Rx packet * @free_count: Number of pre-allocated buffers in rx_free * @rx_free: list of free SKBs for use * @rx_used: List of Rx buffers with no SKB * @need_update: flag to indicate we need to update read/write index * @rb_stts: driver's pointer to receive buffer status * @rb_stts_dma: bus address of receive buffer status * * NOTE: rx_free and rx_used are used as a FIFO for iwl_rx_mem_buffers */ struct iwl_rx_queue { __le32 *bd; dma_addr_t dma_addr; struct iwl_rx_mem_buffer pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS]; struct iwl_rx_mem_buffer *queue[RX_QUEUE_SIZE]; u32 read; u32 write; u32 free_count; u32 write_actual; struct list_head rx_free; struct list_head rx_used; int need_update; struct iwl_rb_status *rb_stts; dma_addr_t rb_stts_dma; spinlock_t lock; }; #define IWL_SUPPORTED_RATES_IE_LEN 8 #define MAX_TID_COUNT 9 #define IWL_INVALID_RATE 0xFF #define IWL_INVALID_VALUE -1 /** * struct iwl_ht_agg -- aggregation status while waiting for block-ack * @txq_id: Tx queue used for Tx attempt * @frame_count: # frames attempted by Tx command * @wait_for_ba: Expect block-ack before next Tx reply * @start_idx: Index of 1st Transmit Frame Descriptor (TFD) in Tx window * @bitmap0: Low order bitmap, one bit for each frame pending ACK in Tx window * @bitmap1: High order, one bit for each frame pending ACK in Tx window * @rate_n_flags: Rate at which Tx was attempted * * If REPLY_TX indicates that aggregation was attempted, driver must wait * for block ack (REPLY_COMPRESSED_BA). This struct stores tx reply info * until block ack arrives. */ struct iwl_ht_agg { u16 txq_id; u16 frame_count; u16 wait_for_ba; u16 start_idx; u64 bitmap; u32 rate_n_flags; #define IWL_AGG_OFF 0 #define IWL_AGG_ON 1 #define IWL_EMPTYING_HW_QUEUE_ADDBA 2 #define IWL_EMPTYING_HW_QUEUE_DELBA 3 u8 state; }; struct iwl_tid_data { u16 seq_number; u16 tfds_in_queue; struct iwl_ht_agg agg; }; struct iwl_hw_key { enum ieee80211_key_alg alg; int keylen; u8 keyidx; u8 key[32]; }; union iwl_ht_rate_supp { u16 rates; struct { u8 siso_rate; u8 mimo_rate; }; }; #define CFG_HT_RX_AMPDU_FACTOR_DEF (0x3) /* * Maximal MPDU density for TX aggregation * 4 - 2us density * 5 - 4us density * 6 - 8us density * 7 - 16us density */ #define CFG_HT_MPDU_DENSITY_4USEC (0x5) #define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC struct iwl_ht_config { /* self configuration data */ bool is_ht; bool is_40mhz; bool single_chain_sufficient; enum ieee80211_smps_mode smps; /* current smps mode */ /* BSS related data */ u8 extension_chan_offset; u8 ht_protection; u8 non_GF_STA_present; }; union iwl_qos_capabity { struct { u8 edca_count:4; /* bit 0-3 */ u8 q_ack:1; /* bit 4 */ u8 queue_request:1; /* bit 5 */ u8 txop_request:1; /* bit 6 */ u8 reserved:1; /* bit 7 */ } q_AP; struct { u8 acvo_APSD:1; /* bit 0 */ u8 acvi_APSD:1; /* bit 1 */ u8 ac_bk_APSD:1; /* bit 2 */ u8 ac_be_APSD:1; /* bit 3 */ u8 q_ack:1; /* bit 4 */ u8 max_len:2; /* bit 5-6 */ u8 more_data_ack:1; /* bit 7 */ } q_STA; u8 val; }; /* QoS structures */ struct iwl_qos_info { int qos_active; union iwl_qos_capabity qos_cap; struct iwl_qosparam_cmd def_qos_parm; }; struct iwl_station_entry { struct iwl_addsta_cmd sta; struct iwl_tid_data tid[MAX_TID_COUNT]; u8 used; struct iwl_hw_key keyinfo; }; /* * iwl_station_priv: Driver's private station information * * When mac80211 creates a station it reserves some space (hw->sta_data_size) * in the structure for use by driver. This structure is places in that * space. */ struct iwl_station_priv { struct iwl_lq_sta lq_sta; atomic_t pending_frames; bool client; bool asleep; }; /* one for each uCode image (inst/data, boot/init/runtime) */ struct fw_desc { void *v_addr; /* access by driver */ dma_addr_t p_addr; /* access by card's busmaster DMA */ u32 len; /* bytes */ }; /* uCode file layout */ struct iwl_ucode_header { __le32 ver; /* major/minor/API/serial */ union { struct { __le32 inst_size; /* bytes of runtime code */ __le32 data_size; /* bytes of runtime data */ __le32 init_size; /* bytes of init code */ __le32 init_data_size; /* bytes of init data */ __le32 boot_size; /* bytes of bootstrap code */ u8 data[0]; /* in same order as sizes */ } v1; struct { __le32 build; /* build number */ __le32 inst_size; /* bytes of runtime code */ __le32 data_size; /* bytes of runtime data */ __le32 init_size; /* bytes of init code */ __le32 init_data_size; /* bytes of init data */ __le32 boot_size; /* bytes of bootstrap code */ u8 data[0]; /* in same order as sizes */ } v2; } u; }; #define UCODE_HEADER_SIZE(ver) ((ver) == 1 ? 24 : 28) struct iwl4965_ibss_seq { u8 mac[ETH_ALEN]; u16 seq_num; u16 frag_num; unsigned long packet_time; struct list_head list; }; struct iwl_sensitivity_ranges { u16 min_nrg_cck; u16 max_nrg_cck; u16 nrg_th_cck; u16 nrg_th_ofdm; u16 auto_corr_min_ofdm; u16 auto_corr_min_ofdm_mrc; u16 auto_corr_min_ofdm_x1; u16 auto_corr_min_ofdm_mrc_x1; u16 auto_corr_max_ofdm; u16 auto_corr_max_ofdm_mrc; u16 auto_corr_max_ofdm_x1; u16 auto_corr_max_ofdm_mrc_x1; u16 auto_corr_max_cck; u16 auto_corr_max_cck_mrc; u16 auto_corr_min_cck; u16 auto_corr_min_cck_mrc; u16 barker_corr_th_min; u16 barker_corr_th_min_mrc; u16 nrg_th_cca; }; #define KELVIN_TO_CELSIUS(x) ((x)-273) #define CELSIUS_TO_KELVIN(x) ((x)+273) /** * struct iwl_hw_params * @max_txq_num: Max # Tx queues supported * @dma_chnl_num: Number of Tx DMA/FIFO channels * @scd_bc_tbls_size: size of scheduler byte count tables * @tfd_size: TFD size * @tx/rx_chains_num: Number of TX/RX chains * @valid_tx/rx_ant: usable antennas * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2) * @max_rxq_log: Log-base-2 of max_rxq_size * @rx_page_order: Rx buffer page order * @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR * @max_stations: * @bcast_sta_id: * @ht40_channel: is 40MHz width possible in band 2.4 * BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ) * @sw_crypto: 0 for hw, 1 for sw * @max_xxx_size: for ucode uses * @ct_kill_threshold: temperature threshold * @calib_init_cfg: setup initial calibrations for the hw * @struct iwl_sensitivity_ranges: range of sensitivity values */ struct iwl_hw_params { u8 max_txq_num; u8 dma_chnl_num; u16 scd_bc_tbls_size; u32 tfd_size; u8 tx_chains_num; u8 rx_chains_num; u8 valid_tx_ant; u8 valid_rx_ant; u16 max_rxq_size; u16 max_rxq_log; u32 rx_page_order; u32 rx_wrt_ptr_reg; u8 max_stations; u8 bcast_sta_id; u8 ht40_channel; u8 max_beacon_itrvl; /* in 1024 ms */ u32 max_inst_size; u32 max_data_size; u32 max_bsm_size; u32 ct_kill_threshold; /* value in hw-dependent units */ u32 ct_kill_exit_threshold; /* value in hw-dependent units */ /* for 1000, 6000 series and up */ u32 calib_init_cfg; const struct iwl_sensitivity_ranges *sens; }; /****************************************************************************** * * Functions implemented in core module which are forward declared here * for use by iwl-[4-5].c * * NOTE: The implementation of these functions are not hardware specific * which is why they are in the core module files. * * Naming convention -- * iwl_ <-- Is part of iwlwifi * iwlXXXX_ <-- Hardware specific (implemented in iwl-XXXX.c for XXXX) * iwl4965_bg_ <-- Called from work queue context * iwl4965_mac_ <-- mac80211 callback * ****************************************************************************/ extern void iwl_update_chain_flags(struct iwl_priv *priv); extern int iwl_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src); extern const u8 iwl_bcast_addr[ETH_ALEN]; extern int iwl_rxq_stop(struct iwl_priv *priv); extern void iwl_txq_ctx_stop(struct iwl_priv *priv); extern int iwl_queue_space(const struct iwl_queue *q); static inline int iwl_queue_used(const struct iwl_queue *q, int i) { return q->write_ptr >= q->read_ptr ? (i >= q->read_ptr && i < q->write_ptr) : !(i < q->read_ptr && i >= q->write_ptr); } static inline u8 get_cmd_index(struct iwl_queue *q, u32 index, int is_huge) { /* * This is for init calibration result and scan command which * required buffer > TFD_MAX_PAYLOAD_SIZE, * the big buffer at end of command array */ if (is_huge) return q->n_window; /* must be power of 2 */ /* Otherwise, use normal size buffers */ return index & (q->n_window - 1); } struct iwl_dma_ptr { dma_addr_t dma; void *addr; size_t size; }; #define IWL_OPERATION_MODE_AUTO 0 #define IWL_OPERATION_MODE_HT_ONLY 1 #define IWL_OPERATION_MODE_MIXED 2 #define IWL_OPERATION_MODE_20MHZ 3 #define IWL_TX_CRC_SIZE 4 #define IWL_TX_DELIMITER_SIZE 4 #define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000 /* Sensitivity and chain noise calibration */ #define INITIALIZATION_VALUE 0xFFFF #define IWL4965_CAL_NUM_BEACONS 20 #define IWL_CAL_NUM_BEACONS 16 #define MAXIMUM_ALLOWED_PATHLOSS 15 #define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3 #define MAX_FA_OFDM 50 #define MIN_FA_OFDM 5 #define MAX_FA_CCK 50 #define MIN_FA_CCK 5 #define AUTO_CORR_STEP_OFDM 1 #define AUTO_CORR_STEP_CCK 3 #define AUTO_CORR_MAX_TH_CCK 160 #define NRG_DIFF 2 #define NRG_STEP_CCK 2 #define NRG_MARGIN 8 #define MAX_NUMBER_CCK_NO_FA 100 #define AUTO_CORR_CCK_MIN_VAL_DEF (125) #define CHAIN_A 0 #define CHAIN_B 1 #define CHAIN_C 2 #define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4 #define ALL_BAND_FILTER 0xFF00 #define IN_BAND_FILTER 0xFF #define MIN_AVERAGE_NOISE_MAX_VALUE 0xFFFFFFFF #define NRG_NUM_PREV_STAT_L 20 #define NUM_RX_CHAINS 3 enum iwl4965_false_alarm_state { IWL_FA_TOO_MANY = 0, IWL_FA_TOO_FEW = 1, IWL_FA_GOOD_RANGE = 2, }; enum iwl4965_chain_noise_state { IWL_CHAIN_NOISE_ALIVE = 0, /* must be 0 */ IWL_CHAIN_NOISE_ACCUMULATE, IWL_CHAIN_NOISE_CALIBRATED, IWL_CHAIN_NOISE_DONE, }; enum iwl4965_calib_enabled_state { IWL_CALIB_DISABLED = 0, /* must be 0 */ IWL_CALIB_ENABLED = 1, }; /* * enum iwl_calib * defines the order in which results of initial calibrations * should be sent to the runtime uCode */ enum iwl_calib { IWL_CALIB_XTAL, IWL_CALIB_DC, IWL_CALIB_LO, IWL_CALIB_TX_IQ, IWL_CALIB_TX_IQ_PERD, IWL_CALIB_BASE_BAND, IWL_CALIB_MAX }; /* Opaque calibration results */ struct iwl_calib_result { void *buf; size_t buf_len; }; enum ucode_type { UCODE_NONE = 0, UCODE_INIT, UCODE_RT }; /* Sensitivity calib data */ struct iwl_sensitivity_data { u32 auto_corr_ofdm; u32 auto_corr_ofdm_mrc; u32 auto_corr_ofdm_x1; u32 auto_corr_ofdm_mrc_x1; u32 auto_corr_cck; u32 auto_corr_cck_mrc; u32 last_bad_plcp_cnt_ofdm; u32 last_fa_cnt_ofdm; u32 last_bad_plcp_cnt_cck; u32 last_fa_cnt_cck; u32 nrg_curr_state; u32 nrg_prev_state; u32 nrg_value[10]; u8 nrg_silence_rssi[NRG_NUM_PREV_STAT_L]; u32 nrg_silence_ref; u32 nrg_energy_idx; u32 nrg_silence_idx; u32 nrg_th_cck; s32 nrg_auto_corr_silence_diff; u32 num_in_cck_no_fa; u32 nrg_th_ofdm; u16 barker_corr_th_min; u16 barker_corr_th_min_mrc; u16 nrg_th_cca; }; /* Chain noise (differential Rx gain) calib data */ struct iwl_chain_noise_data { u32 active_chains; u32 chain_noise_a; u32 chain_noise_b; u32 chain_noise_c; u32 chain_signal_a; u32 chain_signal_b; u32 chain_signal_c; u16 beacon_count; u8 disconn_array[NUM_RX_CHAINS]; u8 delta_gain_code[NUM_RX_CHAINS]; u8 radio_write; u8 state; }; #define EEPROM_SEM_TIMEOUT 10 /* milliseconds */ #define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */ #define IWL_TRAFFIC_ENTRIES (256) #define IWL_TRAFFIC_ENTRY_SIZE (64) enum { MEASUREMENT_READY = (1 << 0), MEASUREMENT_ACTIVE = (1 << 1), }; enum iwl_nvm_type { NVM_DEVICE_TYPE_EEPROM = 0, NVM_DEVICE_TYPE_OTP, }; /* * Two types of OTP memory access modes * IWL_OTP_ACCESS_ABSOLUTE - absolute address mode, * based on physical memory addressing * IWL_OTP_ACCESS_RELATIVE - relative address mode, * based on logical memory addressing */ enum iwl_access_mode { IWL_OTP_ACCESS_ABSOLUTE, IWL_OTP_ACCESS_RELATIVE, }; /** * enum iwl_pa_type - Power Amplifier type * @IWL_PA_SYSTEM: based on uCode configuration * @IWL_PA_INTERNAL: use Internal only */ enum iwl_pa_type { IWL_PA_SYSTEM = 0, IWL_PA_INTERNAL = 1, }; /* interrupt statistics */ struct isr_statistics { u32 hw; u32 sw; u32 sw_err; u32 sch; u32 alive; u32 rfkill; u32 ctkill; u32 wakeup; u32 rx; u32 rx_handlers[REPLY_MAX]; u32 tx; u32 unhandled; }; #ifdef CONFIG_IWLWIFI_DEBUGFS /* management statistics */ enum iwl_mgmt_stats { MANAGEMENT_ASSOC_REQ = 0, MANAGEMENT_ASSOC_RESP, MANAGEMENT_REASSOC_REQ, MANAGEMENT_REASSOC_RESP, MANAGEMENT_PROBE_REQ, MANAGEMENT_PROBE_RESP, MANAGEMENT_BEACON, MANAGEMENT_ATIM, MANAGEMENT_DISASSOC, MANAGEMENT_AUTH, MANAGEMENT_DEAUTH, MANAGEMENT_ACTION, MANAGEMENT_MAX, }; /* control statistics */ enum iwl_ctrl_stats { CONTROL_BACK_REQ = 0, CONTROL_BACK, CONTROL_PSPOLL, CONTROL_RTS, CONTROL_CTS, CONTROL_ACK, CONTROL_CFEND, CONTROL_CFENDACK, CONTROL_MAX, }; struct traffic_stats { u32 mgmt[MANAGEMENT_MAX]; u32 ctrl[CONTROL_MAX]; u32 data_cnt; u64 data_bytes; }; #else struct traffic_stats { u64 data_bytes; }; #endif /* * iwl_switch_rxon: "channel switch" structure * * @ switch_in_progress: channel switch in progress * @ channel: new channel */ struct iwl_switch_rxon { bool switch_in_progress; __le16 channel; }; /* * schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds * to perform continuous uCode event logging operation if enabled */ #define UCODE_TRACE_PERIOD (100) /* * iwl_event_log: current uCode event log position * * @ucode_trace: enable/disable ucode continuous trace timer * @num_wraps: how many times the event buffer wraps * @next_entry: the entry just before the next one that uCode would fill * @non_wraps_count: counter for no wrap detected when dump ucode events * @wraps_once_count: counter for wrap once detected when dump ucode events * @wraps_more_count: counter for wrap more than once detected * when dump ucode events */ struct iwl_event_log { bool ucode_trace; u32 num_wraps; u32 next_entry; int non_wraps_count; int wraps_once_count; int wraps_more_count; }; /* * host interrupt timeout value * used with setting interrupt coalescing timer * the CSR_INT_COALESCING is an 8 bit register in 32-usec unit * * default interrupt coalescing timer is 64 x 32 = 2048 usecs * default interrupt coalescing calibration timer is 16 x 32 = 512 usecs */ #define IWL_HOST_INT_TIMEOUT_MAX (0xFF) #define IWL_HOST_INT_TIMEOUT_DEF (0x40) #define IWL_HOST_INT_TIMEOUT_MIN (0x0) #define IWL_HOST_INT_CALIB_TIMEOUT_MAX (0xFF) #define IWL_HOST_INT_CALIB_TIMEOUT_DEF (0x10) #define IWL_HOST_INT_CALIB_TIMEOUT_MIN (0x0) /* * This is the threshold value of plcp error rate per 100mSecs. It is * used to set and check for the validity of plcp_delta. */ #define IWL_MAX_PLCP_ERR_THRESHOLD_MIN (0) #define IWL_MAX_PLCP_ERR_THRESHOLD_DEF (50) #define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF (100) #define IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF (200) #define IWL_MAX_PLCP_ERR_THRESHOLD_MAX (255) #define IWL_DELAY_NEXT_FORCE_RF_RESET (HZ*3) #define IWL_DELAY_NEXT_FORCE_FW_RELOAD (HZ*5) enum iwl_reset { IWL_RF_RESET = 0, IWL_FW_RESET, IWL_MAX_FORCE_RESET, }; struct iwl_force_reset { int reset_request_count; int reset_success_count; int reset_reject_count; unsigned long reset_duration; unsigned long last_force_reset_jiffies; }; struct iwl_priv { /* ieee device used by generic ieee processing code */ struct ieee80211_hw *hw; struct ieee80211_channel *ieee_channels; struct ieee80211_rate *ieee_rates; struct iwl_cfg *cfg; /* temporary frame storage list */ struct list_head free_frames; int frames_count; enum ieee80211_band band; int alloc_rxb_page; void (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb); struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS]; /* spectrum measurement report caching */ struct iwl_spectrum_notification measure_report; u8 measurement_status; /* ucode beacon time */ u32 ucode_beacon_time; int missed_beacon_threshold; /* storing the jiffies when the plcp error rate is received */ unsigned long plcp_jiffies; /* force reset */ struct iwl_force_reset force_reset[IWL_MAX_FORCE_RESET]; /* we allocate array of iwl4965_channel_info for NIC's valid channels. * Access via channel # using indirect index array */ struct iwl_channel_info *channel_info; /* channel info array */ u8 channel_count; /* # of channels */ /* each calibration channel group in the EEPROM has a derived * clip setting for each rate. 3945 only.*/ const struct iwl3945_clip_group clip39_groups[5]; /* thermal calibration */ s32 temperature; /* degrees Kelvin */ s32 last_temperature; /* init calibration results */ struct iwl_calib_result calib_results[IWL_CALIB_MAX]; /* Scan related variables */ unsigned long next_scan_jiffies; unsigned long scan_start; unsigned long scan_pass_start; unsigned long scan_start_tsf; void *scan; int scan_bands; struct cfg80211_scan_request *scan_request; bool is_internal_short_scan; u8 scan_tx_ant[IEEE80211_NUM_BANDS]; u8 mgmt_tx_ant; /* spinlock */ spinlock_t lock; /* protect general shared data */ spinlock_t hcmd_lock; /* protect hcmd */ spinlock_t reg_lock; /* protect hw register access */ struct mutex mutex; struct mutex sync_cmd_mutex; /* enable serialization of sync commands */ /* basic pci-network driver stuff */ struct pci_dev *pci_dev; /* pci hardware address support */ void __iomem *hw_base; u32 hw_rev; u32 hw_wa_rev; u8 rev_id; /* uCode images, save to reload in case of failure */ int fw_index; /* firmware we're trying to load */ u32 ucode_ver; /* version of ucode, copy of iwl_ucode.ver */ struct fw_desc ucode_code; /* runtime inst */ struct fw_desc ucode_data; /* runtime data original */ struct fw_desc ucode_data_backup; /* runtime data save/restore */ struct fw_desc ucode_init; /* initialization inst */ struct fw_desc ucode_init_data; /* initialization data */ struct fw_desc ucode_boot; /* bootstrap inst */ enum ucode_type ucode_type; u8 ucode_write_complete; /* the image write is complete */ char firmware_name[25]; struct iwl_rxon_time_cmd rxon_timing; /* We declare this const so it can only be * changed via explicit cast within the * routines that actually update the physical * hardware */ const struct iwl_rxon_cmd active_rxon; struct iwl_rxon_cmd staging_rxon; struct iwl_switch_rxon switch_rxon; /* 1st responses from initialize and runtime uCode images. * 4965's initialize alive response contains some calibration data. */ struct iwl_init_alive_resp card_alive_init; struct iwl_alive_resp card_alive; unsigned long last_blink_time; u8 last_blink_rate; u8 allow_blinking; u64 led_tpt; u16 active_rate; u16 active_rate_basic; u8 assoc_station_added; u8 start_calib; struct iwl_sensitivity_data sensitivity_data; struct iwl_chain_noise_data chain_noise_data; __le16 sensitivity_tbl[HD_TABLE_SIZE]; struct iwl_ht_config current_ht_config; u8 last_phy_res[100]; /* Rate scaling data */ u8 retry_rate; wait_queue_head_t wait_command_queue; int activity_timer_active; /* Rx and Tx DMA processing queues */ struct iwl_rx_queue rxq; struct iwl_tx_queue *txq; unsigned long txq_ctx_active_msk; struct iwl_dma_ptr kw; /* keep warm address */ struct iwl_dma_ptr scd_bc_tbls; u32 scd_base_addr; /* scheduler sram base address */ unsigned long status; int last_rx_noise; /* From beacon statistics */ /* counts mgmt, ctl, and data packets */ struct traffic_stats tx_stats; struct traffic_stats rx_stats; /* counts interrupts */ struct isr_statistics isr_stats; struct iwl_power_mgr power_data; struct iwl_tt_mgmt thermal_throttle; struct iwl_notif_statistics statistics; #ifdef CONFIG_IWLWIFI_DEBUG struct iwl_notif_statistics accum_statistics; struct iwl_notif_statistics delta_statistics; struct iwl_notif_statistics max_delta; #endif /* context information */ u16 rates_mask; u8 bssid[ETH_ALEN]; u16 rts_threshold; u8 mac_addr[ETH_ALEN]; /*station table variables */ spinlock_t sta_lock; int num_stations; struct iwl_station_entry stations[IWL_STATION_COUNT]; struct iwl_wep_key wep_keys[WEP_KEYS_MAX]; u8 default_wep_key; u8 key_mapping_key; unsigned long ucode_key_table; /* queue refcounts */ #define IWL_MAX_HW_QUEUES 32 unsigned long queue_stopped[BITS_TO_LONGS(IWL_MAX_HW_QUEUES)]; /* for each AC */ atomic_t queue_stop_count[4]; /* Indication if ieee80211_ops->open has been called */ u8 is_open; u8 mac80211_registered; /* eeprom -- this is in the card's little endian byte order */ u8 *eeprom; int nvm_device_type; struct iwl_eeprom_calib_info *calib_info; enum nl80211_iftype iw_mode; struct sk_buff *ibss_beacon; /* Last Rx'd beacon timestamp */ u64 timestamp; u16 beacon_int; struct ieee80211_vif *vif; union { #if defined(CONFIG_IWL3945) || defined(CONFIG_IWL3945_MODULE) struct { void *shared_virt; dma_addr_t shared_phys; struct delayed_work thermal_periodic; struct delayed_work rfkill_poll; struct iwl3945_notif_statistics statistics; u32 sta_supp_rates; int last_rx_rssi; /* From Rx packet statistics */ /* Rx'd packet timing information */ u32 last_beacon_time; u64 last_tsf; } _3945; #endif #if defined(CONFIG_IWLAGN) || defined(CONFIG_IWLAGN_MODULE) struct { /* INT ICT Table */ __le32 *ict_tbl; void *ict_tbl_vir; dma_addr_t ict_tbl_dma; dma_addr_t aligned_ict_tbl_dma; int ict_index; u32 inta; bool use_ict; } _agn; #endif }; struct iwl_hw_params hw_params; u32 inta_mask; /* Current association information needed to configure the * hardware */ u16 assoc_id; u16 assoc_capability; struct iwl_qos_info qos_data; struct workqueue_struct *workqueue; struct work_struct restart; struct work_struct scan_completed; struct work_struct rx_replenish; struct work_struct abort_scan; struct work_struct request_scan; struct work_struct beacon_update; struct work_struct tt_work; struct work_struct ct_enter; struct work_struct ct_exit; struct tasklet_struct irq_tasklet; struct delayed_work init_alive_start; struct delayed_work alive_start; struct delayed_work scan_check; /* TX Power */ s8 tx_power_user_lmt; s8 tx_power_device_lmt; s8 tx_power_lmt_in_half_dbm; /* max tx power in half-dBm format */ #ifdef CONFIG_IWLWIFI_DEBUG /* debugging info */ u32 debug_level; /* per device debugging will override global iwl_debug_level if set */ u32 framecnt_to_us; atomic_t restrict_refcnt; bool disable_ht40; #ifdef CONFIG_IWLWIFI_DEBUGFS /* debugfs */ u16 tx_traffic_idx; u16 rx_traffic_idx; u8 *tx_traffic; u8 *rx_traffic; struct dentry *debugfs_dir; u32 dbgfs_sram_offset, dbgfs_sram_len; #endif /* CONFIG_IWLWIFI_DEBUGFS */ #endif /* CONFIG_IWLWIFI_DEBUG */ struct work_struct txpower_work; u32 disable_sens_cal; u32 disable_chain_noise_cal; u32 disable_tx_power_cal; struct work_struct run_time_calib_work; struct timer_list statistics_periodic; struct timer_list ucode_trace; bool hw_ready; struct iwl_event_log event_log; }; /*iwl_priv */ static inline void iwl_txq_ctx_activate(struct iwl_priv *priv, int txq_id) { set_bit(txq_id, &priv->txq_ctx_active_msk); } static inline void iwl_txq_ctx_deactivate(struct iwl_priv *priv, int txq_id) { clear_bit(txq_id, &priv->txq_ctx_active_msk); } #ifdef CONFIG_IWLWIFI_DEBUG const char *iwl_get_tx_fail_reason(u32 status); /* * iwl_get_debug_level: Return active debug level for device * * Using sysfs it is possible to set per device debug level. This debug * level will be used if set, otherwise the global debug level which can be * set via module parameter is used. */ static inline u32 iwl_get_debug_level(struct iwl_priv *priv) { if (priv->debug_level) return priv->debug_level; else return iwl_debug_level; } #else static inline const char *iwl_get_tx_fail_reason(u32 status) { return ""; } static inline u32 iwl_get_debug_level(struct iwl_priv *priv) { return iwl_debug_level; } #endif static inline struct ieee80211_hdr *iwl_tx_queue_get_hdr(struct iwl_priv *priv, int txq_id, int idx) { if (priv->txq[txq_id].txb[idx].skb[0]) return (struct ieee80211_hdr *)priv->txq[txq_id]. txb[idx].skb[0]->data; return NULL; } static inline int iwl_is_associated(struct iwl_priv *priv) { return (priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0; } static inline int is_channel_valid(const struct iwl_channel_info *ch_info) { if (ch_info == NULL) return 0; return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0; } static inline int is_channel_radar(const struct iwl_channel_info *ch_info) { return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0; } static inline u8 is_channel_a_band(const struct iwl_channel_info *ch_info) { return ch_info->band == IEEE80211_BAND_5GHZ; } static inline u8 is_channel_bg_band(const struct iwl_channel_info *ch_info) { return ch_info->band == IEEE80211_BAND_2GHZ; } static inline int is_channel_passive(const struct iwl_channel_info *ch) { return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0; } static inline int is_channel_ibss(const struct iwl_channel_info *ch) { return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0; } static inline void __iwl_free_pages(struct iwl_priv *priv, struct page *page) { __free_pages(page, priv->hw_params.rx_page_order); priv->alloc_rxb_page--; } static inline void iwl_free_pages(struct iwl_priv *priv, unsigned long page) { free_pages(page, priv->hw_params.rx_page_order); priv->alloc_rxb_page--; } #endif /* __iwl_dev_h__ */