/****************************************************************************** * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, * USA * * The full GNU General Public License is included in this distribution * in the file called LICENSE.GPL. * * Contact Information: * Intel Linux Wireless * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * * BSD LICENSE * * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * *****************************************************************************/ /* * Please use this file (iwl-3945-hw.h) only for hardware-related definitions. * Please use iwl-3945-commands.h for uCode API definitions. * Please use iwl-3945.h for driver implementation definitions. */ #ifndef __iwl_3945_hw__ #define __iwl_3945_hw__ #include "iwl-eeprom.h" /* * uCode queue management definitions ... * Queue #4 is the command queue for 3945 and 4965. */ #define IWL_CMD_QUEUE_NUM 4 /* Time constants */ #define SHORT_SLOT_TIME 9 #define LONG_SLOT_TIME 20 /* RSSI to dBm */ #define IWL39_RSSI_OFFSET 95 /* * EEPROM related constants, enums, and structures. */ #define EEPROM_SKU_CAP_OP_MODE_MRC (1 << 7) /* * Mapping of a Tx power level, at factory calibration temperature, * to a radio/DSP gain table index. * One for each of 5 "sample" power levels in each band. * v_det is measured at the factory, using the 3945's built-in power amplifier * (PA) output voltage detector. This same detector is used during Tx of * long packets in normal operation to provide feedback as to proper output * level. * Data copied from EEPROM. * DO NOT ALTER THIS STRUCTURE!!! */ struct iwl3945_eeprom_txpower_sample { u8 gain_index; /* index into power (gain) setup table ... */ s8 power; /* ... for this pwr level for this chnl group */ u16 v_det; /* PA output voltage */ } __attribute__ ((packed)); /* * Mappings of Tx power levels -> nominal radio/DSP gain table indexes. * One for each channel group (a.k.a. "band") (1 for BG, 4 for A). * Tx power setup code interpolates between the 5 "sample" power levels * to determine the nominal setup for a requested power level. * Data copied from EEPROM. * DO NOT ALTER THIS STRUCTURE!!! */ struct iwl3945_eeprom_txpower_group { struct iwl3945_eeprom_txpower_sample samples[5]; /* 5 power levels */ s32 a, b, c, d, e; /* coefficients for voltage->power * formula (signed) */ s32 Fa, Fb, Fc, Fd, Fe; /* these modify coeffs based on * frequency (signed) */ s8 saturation_power; /* highest power possible by h/w in this * band */ u8 group_channel; /* "representative" channel # in this band */ s16 temperature; /* h/w temperature at factory calib this band * (signed) */ } __attribute__ ((packed)); /* * Temperature-based Tx-power compensation data, not band-specific. * These coefficients are use to modify a/b/c/d/e coeffs based on * difference between current temperature and factory calib temperature. * Data copied from EEPROM. */ struct iwl3945_eeprom_temperature_corr { u32 Ta; u32 Tb; u32 Tc; u32 Td; u32 Te; } __attribute__ ((packed)); /* * EEPROM map */ struct iwl3945_eeprom { u8 reserved0[16]; u16 device_id; /* abs.ofs: 16 */ u8 reserved1[2]; u16 pmc; /* abs.ofs: 20 */ u8 reserved2[20]; u8 mac_address[6]; /* abs.ofs: 42 */ u8 reserved3[58]; u16 board_revision; /* abs.ofs: 106 */ u8 reserved4[11]; u8 board_pba_number[9]; /* abs.ofs: 119 */ u8 reserved5[8]; u16 version; /* abs.ofs: 136 */ u8 sku_cap; /* abs.ofs: 138 */ u8 leds_mode; /* abs.ofs: 139 */ u16 oem_mode; u16 wowlan_mode; /* abs.ofs: 142 */ u16 leds_time_interval; /* abs.ofs: 144 */ u8 leds_off_time; /* abs.ofs: 146 */ u8 leds_on_time; /* abs.ofs: 147 */ u8 almgor_m_version; /* abs.ofs: 148 */ u8 antenna_switch_type; /* abs.ofs: 149 */ u8 reserved6[42]; u8 sku_id[4]; /* abs.ofs: 192 */ /* * Per-channel regulatory data. * * Each channel that *might* be supported by 3945 or 4965 has a fixed location * in EEPROM containing EEPROM_CHANNEL_* usage flags (LSB) and max regulatory * txpower (MSB). * * Entries immediately below are for 20 MHz channel width. FAT (40 MHz) * channels (only for 4965, not supported by 3945) appear later in the EEPROM. * * 2.4 GHz channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 */ u16 band_1_count; /* abs.ofs: 196 */ struct iwl_eeprom_channel band_1_channels[14]; /* abs.ofs: 196 */ /* * 4.9 GHz channels 183, 184, 185, 187, 188, 189, 192, 196, * 5.0 GHz channels 7, 8, 11, 12, 16 * (4915-5080MHz) (none of these is ever supported) */ u16 band_2_count; /* abs.ofs: 226 */ struct iwl_eeprom_channel band_2_channels[13]; /* abs.ofs: 228 */ /* * 5.2 GHz channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64 * (5170-5320MHz) */ u16 band_3_count; /* abs.ofs: 254 */ struct iwl_eeprom_channel band_3_channels[12]; /* abs.ofs: 256 */ /* * 5.5 GHz channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 * (5500-5700MHz) */ u16 band_4_count; /* abs.ofs: 280 */ struct iwl_eeprom_channel band_4_channels[11]; /* abs.ofs: 282 */ /* * 5.7 GHz channels 145, 149, 153, 157, 161, 165 * (5725-5825MHz) */ u16 band_5_count; /* abs.ofs: 304 */ struct iwl_eeprom_channel band_5_channels[6]; /* abs.ofs: 306 */ u8 reserved9[194]; /* * 3945 Txpower calibration data. */ #define IWL_NUM_TX_CALIB_GROUPS 5 struct iwl3945_eeprom_txpower_group groups[IWL_NUM_TX_CALIB_GROUPS]; /* abs.ofs: 512 */ struct iwl3945_eeprom_temperature_corr corrections; /* abs.ofs: 832 */ u8 reserved16[172]; /* fill out to full 1024 byte block */ } __attribute__ ((packed)); #define IWL_EEPROM_IMAGE_SIZE 1024 /* End of EEPROM */ #define PCI_LINK_CTRL 0x0F0 #define PCI_POWER_SOURCE 0x0C8 #define PCI_REG_WUM8 0x0E8 #define PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT (0x80000000) #define PCI_CFG_REV_ID_BIT_BASIC_SKU (0x40) /* bit 6 */ #define PCI_CFG_REV_ID_BIT_RTP (0x80) /* bit 7 */ #define TFD_QUEUE_MIN 0 #define TFD_QUEUE_MAX 6 #define TFD_QUEUE_SIZE_MAX (256) #define IWL_NUM_SCAN_RATES (2) #define IWL_DEFAULT_TX_RETRY 15 /*********************************************/ #define RFD_SIZE 4 #define NUM_TFD_CHUNKS 4 #define RX_QUEUE_SIZE 256 #define RX_QUEUE_MASK 255 #define RX_QUEUE_SIZE_LOG 8 #define U32_PAD(n) ((4-(n))&0x3) #define TFD_CTL_COUNT_SET(n) (n << 24) #define TFD_CTL_COUNT_GET(ctl) ((ctl >> 24) & 7) #define TFD_CTL_PAD_SET(n) (n << 28) #define TFD_CTL_PAD_GET(ctl) (ctl >> 28) #define TFD_TX_CMD_SLOTS 256 #define TFD_CMD_SLOTS 32 /* * RX related structures and functions */ #define RX_FREE_BUFFERS 64 #define RX_LOW_WATERMARK 8 /* Sizes and addresses for instruction and data memory (SRAM) in * 3945's embedded processor. Driver access is via HBUS_TARG_MEM_* regs. */ #define IWL39_RTC_INST_LOWER_BOUND (0x000000) #define IWL39_RTC_INST_UPPER_BOUND (0x014000) #define IWL39_RTC_DATA_LOWER_BOUND (0x800000) #define IWL39_RTC_DATA_UPPER_BOUND (0x808000) #define IWL39_RTC_INST_SIZE (IWL39_RTC_INST_UPPER_BOUND - \ IWL39_RTC_INST_LOWER_BOUND) #define IWL39_RTC_DATA_SIZE (IWL39_RTC_DATA_UPPER_BOUND - \ IWL39_RTC_DATA_LOWER_BOUND) #define IWL39_MAX_INST_SIZE IWL39_RTC_INST_SIZE #define IWL39_MAX_DATA_SIZE IWL39_RTC_DATA_SIZE /* Size of uCode instruction memory in bootstrap state machine */ #define IWL39_MAX_BSM_SIZE IWL39_RTC_INST_SIZE #define IWL39_MAX_NUM_QUEUES 8 static inline int iwl3945_hw_valid_rtc_data_addr(u32 addr) { return (addr >= IWL39_RTC_DATA_LOWER_BOUND) && (addr < IWL39_RTC_DATA_UPPER_BOUND); } /* Base physical address of iwl3945_shared is provided to FH_TSSR_CBB_BASE * and &iwl3945_shared.rx_read_ptr[0] is provided to FH_RCSR_RPTR_ADDR(0) */ struct iwl3945_shared { __le32 tx_base_ptr[8]; } __attribute__ ((packed)); static inline u8 iwl3945_hw_get_rate(__le16 rate_n_flags) { return le16_to_cpu(rate_n_flags) & 0xFF; } static inline u16 iwl3945_hw_get_rate_n_flags(__le16 rate_n_flags) { return le16_to_cpu(rate_n_flags); } static inline __le16 iwl3945_hw_set_rate_n_flags(u8 rate, u16 flags) { return cpu_to_le16((u16)rate|flags); } #endif