/* * Intel Wireless WiMAX Connection 2400m * Declarations for bus-generic internal APIs * * * Copyright (C) 2007-2008 Intel Corporation. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name of Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * * Intel Corporation * Inaky Perez-Gonzalez * Yanir Lubetkin * - Initial implementation * * * GENERAL DRIVER ARCHITECTURE * * The i2400m driver is split in the following two major parts: * * - bus specific driver * - bus generic driver (this part) * * The bus specific driver sets up stuff specific to the bus the * device is connected to (USB, SDIO, PCI, tam-tam...non-authoritative * nor binding list) which is basically the device-model management * (probe/disconnect, etc), moving data from device to kernel and * back, doing the power saving details and reseting the device. * * For details on each bus-specific driver, see it's include file, * i2400m-BUSNAME.h * * The bus-generic functionality break up is: * * - Firmware upload: fw.c - takes care of uploading firmware to the * device. bus-specific driver just needs to provides a way to * execute boot-mode commands and to reset the device. * * - RX handling: rx.c - receives data from the bus-specific code and * feeds it to the network or WiMAX stack or uses it to modify * the driver state. bus-specific driver only has to receive * frames and pass them to this module. * * - TX handling: tx.c - manages the TX FIFO queue and provides means * for the bus-specific TX code to pull data from the FIFO * queue. bus-specific code just pulls frames from this module * to sends them to the device. * * - netdev glue: netdev.c - interface with Linux networking * stack. Pass around data frames, and configure when the * device is up and running or shutdown (through ifconfig up / * down). Bus-generic only. * * - control ops: control.c - implements various commmands for * controlling the device. bus-generic only. * * - device model glue: driver.c - implements helpers for the * device-model glue done by the bus-specific layer * (setup/release the driver resources), turning the device on * and off, handling the device reboots/resets and a few simple * WiMAX stack ops. * * Code is also broken up in linux-glue / device-glue. * * Linux glue contains functions that deal mostly with gluing with the * rest of the Linux kernel. * * Device-glue are functions that deal mostly with the way the device * does things and talk the device's language. * * device-glue code is licensed BSD so other open source OSes can take * it to implement their drivers. * * * APIs AND HEADER FILES * * This bus generic code exports three APIs: * * - HDI (host-device interface) definitions common to all busses * (include/linux/wimax/i2400m.h); these can be also used by user * space code. * - internal API for the bus-generic code * - external API for the bus-specific drivers * * * LIFE CYCLE: * * When the bus-specific driver probes, it allocates a network device * with enough space for it's data structue, that must contain a * &struct i2400m at the top. * * On probe, it needs to fill the i2400m members marked as [fill], as * well as i2400m->wimax_dev.net_dev and call i2400m_setup(). The * i2400m driver will only register with the WiMAX and network stacks; * the only access done to the device is to read the MAC address so we * can register a network device. * * The high-level call flow is: * * bus_probe() * i2400m_setup() * boot rom initialization / read mac addr * network / WiMAX stacks registration * i2400m_dev_start() * i2400m->bus_dev_start() * i2400m_dev_initialize() * * The reverse applies for a disconnect() call: * * bus_disconnect() * i2400m_release() * i2400m_dev_stop() * i2400m_dev_shutdown() * i2400m->bus_dev_stop() * network / WiMAX stack unregistration * * At this point, control and data communications are possible. * * While the device is up, it might reset. The bus-specific driver has * to catch that situation and call i2400m_dev_reset_handle() to deal * with it (reset the internal driver structures and go back to square * one). */ #ifndef __I2400M_H__ #define __I2400M_H__ #include #include #include #include #include #include #include #include /* Misc constants */ enum { /* Size of the Boot Mode Command buffer */ I2400M_BM_CMD_BUF_SIZE = 16 * 1024, I2400M_BM_ACK_BUF_SIZE = 256, }; /** * struct i2400m_poke_table - Hardware poke table for the Intel 2400m * * This structure will be used to create a device specific poke table * to put the device in a consistant state at boot time. * * @address: The device address to poke * * @data: The data value to poke to the device address * */ struct i2400m_poke_table{ __le32 address; __le32 data; }; #define I2400M_FW_POKE(a, d) { \ .address = cpu_to_le32(a), \ .data = cpu_to_le32(d) \ } /** * i2400m_reset_type - methods to reset a device * * @I2400M_RT_WARM: Reset without device disconnection, device handles * are kept valid but state is back to power on, with firmware * re-uploaded. * @I2400M_RT_COLD: Tell the device to disconnect itself from the bus * and reconnect. Renders all device handles invalid. * @I2400M_RT_BUS: Tells the bus to reset the device; last measure * used when both types above don't work. */ enum i2400m_reset_type { I2400M_RT_WARM, /* first measure */ I2400M_RT_COLD, /* second measure */ I2400M_RT_BUS, /* call in artillery */ }; struct i2400m_reset_ctx; struct i2400m_roq; struct i2400m_barker_db; /** * struct i2400m - descriptor for an Intel 2400m * * Members marked with [fill] must be filled out/initialized before * calling i2400m_setup(). * * @bus_tx_block_size: [fill] SDIO imposes a 256 block size, USB 16, * so we have a tx_blk_size variable that the bus layer sets to * tell the engine how much of that we need. * * @bus_pl_size_max: [fill] Maximum payload size. * * @bus_dev_start: [fill] Function called by the bus-generic code * [i2400m_dev_start()] to setup the bus-specific communications * to the the device. See LIFE CYCLE above. * * NOTE: Doesn't need to upload the firmware, as that is taken * care of by the bus-generic code. * * @bus_dev_stop: [fill] Function called by the bus-generic code * [i2400m_dev_stop()] to shutdown the bus-specific communications * to the the device. See LIFE CYCLE above. * * This function does not need to reset the device, just tear down * all the host resources created to handle communication with * the device. * * @bus_tx_kick: [fill] Function called by the bus-generic code to let * the bus-specific code know that there is data available in the * TX FIFO for transmission to the device. * * This function cannot sleep. * * @bus_reset: [fill] Function called by the bus-generic code to reset * the device in in various ways. Doesn't need to wait for the * reset to finish. * * If warm or cold reset fail, this function is expected to do a * bus-specific reset (eg: USB reset) to get the device to a * working state (even if it implies device disconecction). * * Note the warm reset is used by the firmware uploader to * reinitialize the device. * * IMPORTANT: this is called very early in the device setup * process, so it cannot rely on common infrastructure being laid * out. * * @bus_bm_retries: [fill] How many times shall a firmware upload / * device initialization be retried? Different models of the same * device might need different values, hence it is set by the * bus-specific driver. Note this value is used in two places, * i2400m_fw_dnload() and __i2400m_dev_start(); they won't become * multiplicative (__i2400m_dev_start() calling N times * i2400m_fw_dnload() and this trying N times to download the * firmware), as if __i2400m_dev_start() only retries if the * firmware crashed while initializing the device (not in a * general case). * * @bus_bm_cmd_send: [fill] Function called to send a boot-mode * command. Flags are defined in 'enum i2400m_bm_cmd_flags'. This * is synchronous and has to return 0 if ok or < 0 errno code in * any error condition. * * @bus_bm_wait_for_ack: [fill] Function called to wait for a * boot-mode notification (that can be a response to a previously * issued command or an asynchronous one). Will read until all the * indicated size is read or timeout. Reading more or less data * than asked for is an error condition. Return 0 if ok, < 0 errno * code on error. * * The caller to this function will check if the response is a * barker that indicates the device going into reset mode. * * @bus_fw_names: [fill] a NULL-terminated array with the names of the * firmware images to try loading. This is made a list so we can * support backward compatibility of firmware releases (eg: if we * can't find the default v1.4, we try v1.3). In general, the name * should be i2400m-fw-X-VERSION.sbcf, where X is the bus name. * The list is tried in order and the first one that loads is * used. The fw loader will set i2400m->fw_name to point to the * active firmware image. * * @bus_bm_mac_addr_impaired: [fill] Set to true if the device's MAC * address provided in boot mode is kind of broken and needs to * be re-read later on. * * @bus_bm_pokes_table: [fill/optional] A table of device addresses * and values that will be poked at device init time to move the * device to the correct state for the type of boot/firmware being * used. This table MUST be terminated with (0x000000, * 0x00000000) or bad things will happen. * * * @wimax_dev: WiMAX generic device for linkage into the kernel WiMAX * stack. Due to the way a net_device is allocated, we need to * force this to be the first field so that we can get from * netdev_priv() the right pointer. * * @rx_reorder: 1 if RX reordering is enabled; this can only be * set at probe time. * * @state: device's state (as reported by it) * * @state_wq: waitqueue that is woken up whenever the state changes * * @tx_lock: spinlock to protect TX members * * @tx_buf: FIFO buffer for TX; we queue data here * * @tx_in: FIFO index for incoming data. Note this doesn't wrap around * and it is always greater than @tx_out. * * @tx_out: FIFO index for outgoing data * * @tx_msg: current TX message that is active in the FIFO for * appending payloads. * * @tx_sequence: current sequence number for TX messages from the * device to the host. * * @tx_msg_size: size of the current message being transmitted by the * bus-specific code. * * @tx_pl_num: total number of payloads sent * * @tx_pl_max: maximum number of payloads sent in a TX message * * @tx_pl_min: minimum number of payloads sent in a TX message * * @tx_num: number of TX messages sent * * @tx_size_acc: number of bytes in all TX messages sent * (this is different to net_dev's statistics as it also counts * control messages). * * @tx_size_min: smallest TX message sent. * * @tx_size_max: biggest TX message sent. * * @rx_lock: spinlock to protect RX members * * @rx_pl_num: total number of payloads received * * @rx_pl_max: maximum number of payloads received in a RX message * * @rx_pl_min: minimum number of payloads received in a RX message * * @rx_num: number of RX messages received * * @rx_size_acc: number of bytes in all RX messages received * (this is different to net_dev's statistics as it also counts * control messages). * * @rx_size_min: smallest RX message received. * * @rx_size_max: buggest RX message received. * * @rx_roq: RX ReOrder queues. (fw >= v1.4) When packets are received * out of order, the device will ask the driver to hold certain * packets until the ones that are received out of order can be * delivered. Then the driver can release them to the host. See * drivers/net/i2400m/rx.c for details. * * @src_mac_addr: MAC address used to make ethernet packets be coming * from. This is generated at i2400m_setup() time and used during * the life cycle of the instance. See i2400m_fake_eth_header(). * * @init_mutex: Mutex used for serializing the device bringup * sequence; this way if the device reboots in the middle, we * don't try to do a bringup again while we are tearing down the * one that failed. * * Can't reuse @msg_mutex because from within the bringup sequence * we need to send messages to the device and thus use @msg_mutex. * * @msg_mutex: mutex used to send control commands to the device (we * only allow one at a time, per host-device interface design). * * @msg_completion: used to wait for an ack to a control command sent * to the device. * * @ack_skb: used to store the actual ack to a control command if the * reception of the command was successful. Otherwise, a ERR_PTR() * errno code that indicates what failed with the ack reception. * * Only valid after @msg_completion is woken up. Only updateable * if @msg_completion is armed. Only touched by * i2400m_msg_to_dev(). * * Protected by @rx_lock. In theory the command execution flow is * sequential, but in case the device sends an out-of-phase or * very delayed response, we need to avoid it trampling current * execution. * * @bm_cmd_buf: boot mode command buffer for composing firmware upload * commands. * * USB can't r/w to stack, vmalloc, etc...as well, we end up * having to alloc/free a lot to compose commands, so we use these * for stagging and not having to realloc all the time. * * This assumes the code always runs serialized. Only one thread * can call i2400m_bm_cmd() at the same time. * * @bm_ack_buf: boot mode acknoledge buffer for staging reception of * responses to commands. * * See @bm_cmd_buf. * * @work_queue: work queue for processing device reports. This * workqueue cannot be used for processing TX or RX to the device, * as from it we'll process device reports, which might require * further communication with the device. * * @debugfs_dentry: hookup for debugfs files. * These have to be in a separate directory, a child of * (wimax_dev->debugfs_dentry) so they can be removed when the * module unloads, as we don't keep each dentry. * * @fw_name: name of the firmware image that is currently being used. * * @fw_version: version of the firmware interface, Major.minor, * encoded in the high word and low word (major << 16 | minor). * * @fw_hdrs: NULL terminated array of pointers to the firmware * headers. This is only available during firmware load time. * * @fw_cached: Used to cache firmware when the system goes to * suspend/standby/hibernation (as on resume we can't read it). If * NULL, no firmware was cached, read it. If ~0, you can't read * any firmware files (the system still didn't come out of suspend * and failed to cache one), so abort; otherwise, a valid cached * firmware to be used. Access to this variable is protected by * the spinlock i2400m->rx_lock. * * @barker: barker type that the device uses; this is initialized by * i2400m_is_boot_barker() the first time it is called. Then it * won't change during the life cycle of the device and everytime * a boot barker is received, it is just verified for it being the * same. * * @pm_notifier: used to register for PM events */ struct i2400m { struct wimax_dev wimax_dev; /* FIRST! See doc */ unsigned updown:1; /* Network device is up or down */ unsigned boot_mode:1; /* is the device in boot mode? */ unsigned sboot:1; /* signed or unsigned fw boot */ unsigned ready:1; /* all probing steps done */ unsigned rx_reorder:1; /* RX reorder is enabled */ u8 trace_msg_from_user; /* echo rx msgs to 'trace' pipe */ /* typed u8 so /sys/kernel/debug/u8 can tweak */ enum i2400m_system_state state; wait_queue_head_t state_wq; /* Woken up when on state updates */ size_t bus_tx_block_size; size_t bus_pl_size_max; unsigned bus_bm_retries; int (*bus_dev_start)(struct i2400m *); void (*bus_dev_stop)(struct i2400m *); void (*bus_tx_kick)(struct i2400m *); int (*bus_reset)(struct i2400m *, enum i2400m_reset_type); ssize_t (*bus_bm_cmd_send)(struct i2400m *, const struct i2400m_bootrom_header *, size_t, int flags); ssize_t (*bus_bm_wait_for_ack)(struct i2400m *, struct i2400m_bootrom_header *, size_t); const char **bus_fw_names; unsigned bus_bm_mac_addr_impaired:1; const struct i2400m_poke_table *bus_bm_pokes_table; spinlock_t tx_lock; /* protect TX state */ void *tx_buf; size_t tx_in, tx_out; struct i2400m_msg_hdr *tx_msg; size_t tx_sequence, tx_msg_size; /* TX stats */ unsigned tx_pl_num, tx_pl_max, tx_pl_min, tx_num, tx_size_acc, tx_size_min, tx_size_max; /* RX stuff */ spinlock_t rx_lock; /* protect RX state */ unsigned rx_pl_num, rx_pl_max, rx_pl_min, rx_num, rx_size_acc, rx_size_min, rx_size_max; struct i2400m_roq *rx_roq; /* not under rx_lock! */ u8 src_mac_addr[ETH_HLEN]; struct mutex msg_mutex; /* serialize command execution */ struct completion msg_completion; struct sk_buff *ack_skb; /* protected by rx_lock */ void *bm_ack_buf; /* for receiving acks over USB */ void *bm_cmd_buf; /* for issuing commands over USB */ struct workqueue_struct *work_queue; struct mutex init_mutex; /* protect bringup seq */ struct i2400m_reset_ctx *reset_ctx; /* protected by init_mutex */ struct work_struct wake_tx_ws; struct sk_buff *wake_tx_skb; struct dentry *debugfs_dentry; const char *fw_name; /* name of the current firmware image */ unsigned long fw_version; /* version of the firmware interface */ const struct i2400m_bcf_hdr **fw_hdrs; struct i2400m_fw *fw_cached; /* protected by rx_lock */ struct i2400m_barker_db *barker; struct notifier_block pm_notifier; }; /* * Initialize a 'struct i2400m' from all zeroes * * This is a bus-generic API call. */ static inline void i2400m_init(struct i2400m *i2400m) { wimax_dev_init(&i2400m->wimax_dev); i2400m->boot_mode = 1; i2400m->rx_reorder = 1; init_waitqueue_head(&i2400m->state_wq); spin_lock_init(&i2400m->tx_lock); i2400m->tx_pl_min = UINT_MAX; i2400m->tx_size_min = UINT_MAX; spin_lock_init(&i2400m->rx_lock); i2400m->rx_pl_min = UINT_MAX; i2400m->rx_size_min = UINT_MAX; mutex_init(&i2400m->msg_mutex); init_completion(&i2400m->msg_completion); mutex_init(&i2400m->init_mutex); /* wake_tx_ws is initialized in i2400m_tx_setup() */ } /* * Bus-generic internal APIs * ------------------------- */ static inline struct i2400m *wimax_dev_to_i2400m(struct wimax_dev *wimax_dev) { return container_of(wimax_dev, struct i2400m, wimax_dev); } static inline struct i2400m *net_dev_to_i2400m(struct net_device *net_dev) { return wimax_dev_to_i2400m(netdev_priv(net_dev)); } /* * Boot mode support */ /** * i2400m_bm_cmd_flags - flags to i2400m_bm_cmd() * * @I2400M_BM_CMD_RAW: send the command block as-is, without doing any * extra processing for adding CRC. */ enum i2400m_bm_cmd_flags { I2400M_BM_CMD_RAW = 1 << 2, }; /** * i2400m_bri - Boot-ROM indicators * * Flags for i2400m_bootrom_init() and i2400m_dev_bootstrap() [which * are passed from things like i2400m_setup()]. Can be combined with * |. * * @I2400M_BRI_SOFT: The device rebooted already and a reboot * barker received, proceed directly to ack the boot sequence. * @I2400M_BRI_NO_REBOOT: Do not reboot the device and proceed * directly to wait for a reboot barker from the device. * @I2400M_BRI_MAC_REINIT: We need to reinitialize the boot * rom after reading the MAC adress. This is quite a dirty hack, * if you ask me -- the device requires the bootrom to be * intialized after reading the MAC address. */ enum i2400m_bri { I2400M_BRI_SOFT = 1 << 1, I2400M_BRI_NO_REBOOT = 1 << 2, I2400M_BRI_MAC_REINIT = 1 << 3, }; extern void i2400m_bm_cmd_prepare(struct i2400m_bootrom_header *); extern int i2400m_dev_bootstrap(struct i2400m *, enum i2400m_bri); extern int i2400m_read_mac_addr(struct i2400m *); extern int i2400m_bootrom_init(struct i2400m *, enum i2400m_bri); extern int i2400m_is_boot_barker(struct i2400m *, const void *, size_t); static inline int i2400m_is_d2h_barker(const void *buf) { const __le32 *barker = buf; return le32_to_cpu(*barker) == I2400M_D2H_MSG_BARKER; } extern void i2400m_unknown_barker(struct i2400m *, const void *, size_t); /* Make/grok boot-rom header commands */ static inline __le32 i2400m_brh_command(enum i2400m_brh_opcode opcode, unsigned use_checksum, unsigned direct_access) { return cpu_to_le32( I2400M_BRH_SIGNATURE | (direct_access ? I2400M_BRH_DIRECT_ACCESS : 0) | I2400M_BRH_RESPONSE_REQUIRED /* response always required */ | (use_checksum ? I2400M_BRH_USE_CHECKSUM : 0) | (opcode & I2400M_BRH_OPCODE_MASK)); } static inline void i2400m_brh_set_opcode(struct i2400m_bootrom_header *hdr, enum i2400m_brh_opcode opcode) { hdr->command = cpu_to_le32( (le32_to_cpu(hdr->command) & ~I2400M_BRH_OPCODE_MASK) | (opcode & I2400M_BRH_OPCODE_MASK)); } static inline unsigned i2400m_brh_get_opcode(const struct i2400m_bootrom_header *hdr) { return le32_to_cpu(hdr->command) & I2400M_BRH_OPCODE_MASK; } static inline unsigned i2400m_brh_get_response(const struct i2400m_bootrom_header *hdr) { return (le32_to_cpu(hdr->command) & I2400M_BRH_RESPONSE_MASK) >> I2400M_BRH_RESPONSE_SHIFT; } static inline unsigned i2400m_brh_get_use_checksum(const struct i2400m_bootrom_header *hdr) { return le32_to_cpu(hdr->command) & I2400M_BRH_USE_CHECKSUM; } static inline unsigned i2400m_brh_get_response_required( const struct i2400m_bootrom_header *hdr) { return le32_to_cpu(hdr->command) & I2400M_BRH_RESPONSE_REQUIRED; } static inline unsigned i2400m_brh_get_direct_access(const struct i2400m_bootrom_header *hdr) { return le32_to_cpu(hdr->command) & I2400M_BRH_DIRECT_ACCESS; } static inline unsigned i2400m_brh_get_signature(const struct i2400m_bootrom_header *hdr) { return (le32_to_cpu(hdr->command) & I2400M_BRH_SIGNATURE_MASK) >> I2400M_BRH_SIGNATURE_SHIFT; } /* * Driver / device setup and internal functions */ extern void i2400m_netdev_setup(struct net_device *net_dev); extern int i2400m_sysfs_setup(struct device_driver *); extern void i2400m_sysfs_release(struct device_driver *); extern int i2400m_tx_setup(struct i2400m *); extern void i2400m_wake_tx_work(struct work_struct *); extern void i2400m_tx_release(struct i2400m *); extern int i2400m_rx_setup(struct i2400m *); extern void i2400m_rx_release(struct i2400m *); extern void i2400m_fw_cache(struct i2400m *); extern void i2400m_fw_uncache(struct i2400m *); extern void i2400m_net_rx(struct i2400m *, struct sk_buff *, unsigned, const void *, int); extern void i2400m_net_erx(struct i2400m *, struct sk_buff *, enum i2400m_cs); extern void i2400m_net_wake_stop(struct i2400m *); enum i2400m_pt; extern int i2400m_tx(struct i2400m *, const void *, size_t, enum i2400m_pt); #ifdef CONFIG_DEBUG_FS extern int i2400m_debugfs_add(struct i2400m *); extern void i2400m_debugfs_rm(struct i2400m *); #else static inline int i2400m_debugfs_add(struct i2400m *i2400m) { return 0; } static inline void i2400m_debugfs_rm(struct i2400m *i2400m) {} #endif /* Initialize/shutdown the device */ extern int i2400m_dev_initialize(struct i2400m *); extern void i2400m_dev_shutdown(struct i2400m *); extern struct attribute_group i2400m_dev_attr_group; /* HDI message's payload description handling */ static inline size_t i2400m_pld_size(const struct i2400m_pld *pld) { return I2400M_PLD_SIZE_MASK & le32_to_cpu(pld->val); } static inline enum i2400m_pt i2400m_pld_type(const struct i2400m_pld *pld) { return (I2400M_PLD_TYPE_MASK & le32_to_cpu(pld->val)) >> I2400M_PLD_TYPE_SHIFT; } static inline void i2400m_pld_set(struct i2400m_pld *pld, size_t size, enum i2400m_pt type) { pld->val = cpu_to_le32( ((type << I2400M_PLD_TYPE_SHIFT) & I2400M_PLD_TYPE_MASK) | (size & I2400M_PLD_SIZE_MASK)); } /* * API for the bus-specific drivers * -------------------------------- */ static inline struct i2400m *i2400m_get(struct i2400m *i2400m) { dev_hold(i2400m->wimax_dev.net_dev); return i2400m; } static inline void i2400m_put(struct i2400m *i2400m) { dev_put(i2400m->wimax_dev.net_dev); } extern int i2400m_dev_reset_handle(struct i2400m *, const char *); extern int i2400m_bm_buf_alloc(struct i2400m *i2400m); extern void i2400m_bm_buf_free(struct i2400m *i2400m); /* * _setup()/_release() are called by the probe/disconnect functions of * the bus-specific drivers. */ extern int i2400m_setup(struct i2400m *, enum i2400m_bri bm_flags); extern void i2400m_release(struct i2400m *); extern int i2400m_rx(struct i2400m *, struct sk_buff *); extern struct i2400m_msg_hdr *i2400m_tx_msg_get(struct i2400m *, size_t *); extern void i2400m_tx_msg_sent(struct i2400m *); extern int i2400m_power_save_disabled; /* * Utility functions */ static inline struct device *i2400m_dev(struct i2400m *i2400m) { return i2400m->wimax_dev.net_dev->dev.parent; } /* * Helper for scheduling simple work functions * * This struct can get any kind of payload attached (normally in the * form of a struct where you pack the stuff you want to pass to the * _work function). */ struct i2400m_work { struct work_struct ws; struct i2400m *i2400m; size_t pl_size; u8 pl[0]; }; extern int i2400m_queue_work(struct i2400m *, void (*)(struct work_struct *), gfp_t, const void *, size_t); extern int i2400m_schedule_work(struct i2400m *, void (*)(struct work_struct *), gfp_t, const void *, size_t); extern int i2400m_msg_check_status(const struct i2400m_l3l4_hdr *, char *, size_t); extern int i2400m_msg_size_check(struct i2400m *, const struct i2400m_l3l4_hdr *, size_t); extern struct sk_buff *i2400m_msg_to_dev(struct i2400m *, const void *, size_t); extern void i2400m_msg_to_dev_cancel_wait(struct i2400m *, int); extern void i2400m_msg_ack_hook(struct i2400m *, const struct i2400m_l3l4_hdr *, size_t); extern void i2400m_report_hook(struct i2400m *, const struct i2400m_l3l4_hdr *, size_t); extern int i2400m_cmd_enter_powersave(struct i2400m *); extern int i2400m_cmd_get_state(struct i2400m *); extern int i2400m_cmd_exit_idle(struct i2400m *); extern struct sk_buff *i2400m_get_device_info(struct i2400m *); extern int i2400m_firmware_check(struct i2400m *); extern int i2400m_set_init_config(struct i2400m *, const struct i2400m_tlv_hdr **, size_t); extern int i2400m_set_idle_timeout(struct i2400m *, unsigned); static inline struct usb_endpoint_descriptor *usb_get_epd(struct usb_interface *iface, int ep) { return &iface->cur_altsetting->endpoint[ep].desc; } extern int i2400m_op_rfkill_sw_toggle(struct wimax_dev *, enum wimax_rf_state); extern void i2400m_report_tlv_rf_switches_status( struct i2400m *, const struct i2400m_tlv_rf_switches_status *); /* * Helpers for firmware backwards compability * * As we aim to support at least the firmware version that was * released with the previous kernel/driver release, some code will be * conditionally executed depending on the firmware version. On each * release, the code to support fw releases past the last two ones * will be purged. * * By making it depend on this macros, it is easier to keep it a tab * on what has to go and what not. */ static inline unsigned i2400m_le_v1_3(struct i2400m *i2400m) { /* running fw is lower or v1.3 */ return i2400m->fw_version <= 0x00090001; } static inline unsigned i2400m_ge_v1_4(struct i2400m *i2400m) { /* running fw is higher or v1.4 */ return i2400m->fw_version >= 0x00090002; } /* * Do a millisecond-sleep for allowing wireshark to dump all the data * packets. Used only for debugging. */ static inline void __i2400m_msleep(unsigned ms) { #if 1 #else msleep(ms); #endif } /* module initialization helpers */ extern int i2400m_barker_db_init(const char *); extern void i2400m_barker_db_exit(void); /* Module parameters */ extern int i2400m_idle_mode_disabled; extern int i2400m_rx_reorder_disabled; #endif /* #ifndef __I2400M_H__ */