/* * Sealevel Systems 4021 driver. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * * (c) Copyright 1999, 2001 Alan Cox * (c) Copyright 2001 Red Hat Inc. * Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <khc@pm.waw.pl> * */ #include <linux/module.h> #include <linux/kernel.h> #include <linux/mm.h> #include <linux/net.h> #include <linux/skbuff.h> #include <linux/netdevice.h> #include <linux/if_arp.h> #include <linux/delay.h> #include <linux/hdlc.h> #include <linux/ioport.h> #include <linux/init.h> #include <net/arp.h> #include <asm/irq.h> #include <asm/io.h> #include <asm/dma.h> #include <asm/byteorder.h> #include "z85230.h" struct slvl_device { struct z8530_channel *chan; int channel; }; struct slvl_board { struct slvl_device dev[2]; struct z8530_dev board; int iobase; }; /* * Network driver support routines */ static inline struct slvl_device* dev_to_chan(struct net_device *dev) { return (struct slvl_device *)dev_to_hdlc(dev)->priv; } /* * Frame receive. Simple for our card as we do HDLC and there * is no funny garbage involved */ static void sealevel_input(struct z8530_channel *c, struct sk_buff *skb) { /* Drop the CRC - it's not a good idea to try and negotiate it ;) */ skb_trim(skb, skb->len - 2); skb->protocol = hdlc_type_trans(skb, c->netdevice); skb_reset_mac_header(skb); skb->dev = c->netdevice; netif_rx(skb); } /* * We've been placed in the UP state */ static int sealevel_open(struct net_device *d) { struct slvl_device *slvl = dev_to_chan(d); int err = -1; int unit = slvl->channel; /* * Link layer up. */ switch (unit) { case 0: err = z8530_sync_dma_open(d, slvl->chan); break; case 1: err = z8530_sync_open(d, slvl->chan); break; } if (err) return err; err = hdlc_open(d); if (err) { switch (unit) { case 0: z8530_sync_dma_close(d, slvl->chan); break; case 1: z8530_sync_close(d, slvl->chan); break; } return err; } slvl->chan->rx_function = sealevel_input; /* * Go go go */ netif_start_queue(d); return 0; } static int sealevel_close(struct net_device *d) { struct slvl_device *slvl = dev_to_chan(d); int unit = slvl->channel; /* * Discard new frames */ slvl->chan->rx_function = z8530_null_rx; hdlc_close(d); netif_stop_queue(d); switch (unit) { case 0: z8530_sync_dma_close(d, slvl->chan); break; case 1: z8530_sync_close(d, slvl->chan); break; } return 0; } static int sealevel_ioctl(struct net_device *d, struct ifreq *ifr, int cmd) { /* struct slvl_device *slvl=dev_to_chan(d); z8530_ioctl(d,&slvl->sync.chanA,ifr,cmd) */ return hdlc_ioctl(d, ifr, cmd); } /* * Passed network frames, fire them downwind. */ static int sealevel_queue_xmit(struct sk_buff *skb, struct net_device *d) { return z8530_queue_xmit(dev_to_chan(d)->chan, skb); } static int sealevel_attach(struct net_device *dev, unsigned short encoding, unsigned short parity) { if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT) return 0; return -EINVAL; } static int slvl_setup(struct slvl_device *sv, int iobase, int irq) { struct net_device *dev = alloc_hdlcdev(sv); if (!dev) return -1; dev_to_hdlc(dev)->attach = sealevel_attach; dev_to_hdlc(dev)->xmit = sealevel_queue_xmit; dev->open = sealevel_open; dev->stop = sealevel_close; dev->do_ioctl = sealevel_ioctl; dev->base_addr = iobase; dev->irq = irq; if (register_hdlc_device(dev)) { printk(KERN_ERR "sealevel: unable to register HDLC device\n"); free_netdev(dev); return -1; } sv->chan->netdevice = dev; return 0; } /* * Allocate and setup Sealevel board. */ static __init struct slvl_board *slvl_init(int iobase, int irq, int txdma, int rxdma, int slow) { struct z8530_dev *dev; struct slvl_board *b; /* * Get the needed I/O space */ if (!request_region(iobase, 8, "Sealevel 4021")) { printk(KERN_WARNING "sealevel: I/O 0x%X already in use.\n", iobase); return NULL; } b = kzalloc(sizeof(struct slvl_board), GFP_KERNEL); if (!b) goto err_kzalloc; b->dev[0].chan = &b->board.chanA; b->dev[0].channel = 0; b->dev[1].chan = &b->board.chanB; b->dev[1].channel = 1; dev = &b->board; /* * Stuff in the I/O addressing */ dev->active = 0; b->iobase = iobase; /* * Select 8530 delays for the old board */ if (slow) iobase |= Z8530_PORT_SLEEP; dev->chanA.ctrlio = iobase + 1; dev->chanA.dataio = iobase; dev->chanB.ctrlio = iobase + 3; dev->chanB.dataio = iobase + 2; dev->chanA.irqs = &z8530_nop; dev->chanB.irqs = &z8530_nop; /* * Assert DTR enable DMA */ outb(3 | (1 << 7), b->iobase + 4); /* We want a fast IRQ for this device. Actually we'd like an even faster IRQ ;) - This is one driver RtLinux is made for */ if (request_irq(irq, &z8530_interrupt, IRQF_DISABLED, "SeaLevel", dev) < 0) { printk(KERN_WARNING "sealevel: IRQ %d already in use.\n", irq); goto err_request_irq; } dev->irq = irq; dev->chanA.private = &b->dev[0]; dev->chanB.private = &b->dev[1]; dev->chanA.dev = dev; dev->chanB.dev = dev; dev->chanA.txdma = 3; dev->chanA.rxdma = 1; if (request_dma(dev->chanA.txdma, "SeaLevel (TX)")) goto err_dma_tx; if (request_dma(dev->chanA.rxdma, "SeaLevel (RX)")) goto err_dma_rx; disable_irq(irq); /* * Begin normal initialise */ if (z8530_init(dev) != 0) { printk(KERN_ERR "Z8530 series device not found.\n"); enable_irq(irq); goto free_hw; } if (dev->type == Z85C30) { z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream); z8530_channel_load(&dev->chanB, z8530_hdlc_kilostream); } else { z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream_85230); z8530_channel_load(&dev->chanB, z8530_hdlc_kilostream_85230); } /* * Now we can take the IRQ */ enable_irq(irq); if (slvl_setup(&b->dev[0], iobase, irq)) goto free_hw; if (slvl_setup(&b->dev[1], iobase, irq)) goto free_netdev0; z8530_describe(dev, "I/O", iobase); dev->active = 1; return b; free_netdev0: unregister_hdlc_device(b->dev[0].chan->netdevice); free_netdev(b->dev[0].chan->netdevice); free_hw: free_dma(dev->chanA.rxdma); err_dma_rx: free_dma(dev->chanA.txdma); err_dma_tx: free_irq(irq, dev); err_request_irq: kfree(b); err_kzalloc: release_region(iobase, 8); return NULL; } static void __exit slvl_shutdown(struct slvl_board *b) { int u; z8530_shutdown(&b->board); for (u = 0; u < 2; u++) { struct net_device *d = b->dev[u].chan->netdevice; unregister_hdlc_device(d); free_netdev(d); } free_irq(b->board.irq, &b->board); free_dma(b->board.chanA.rxdma); free_dma(b->board.chanA.txdma); /* DMA off on the card, drop DTR */ outb(0, b->iobase); release_region(b->iobase, 8); kfree(b); } static int io=0x238; static int txdma=1; static int rxdma=3; static int irq=5; static int slow=0; module_param(io, int, 0); MODULE_PARM_DESC(io, "The I/O base of the Sealevel card"); module_param(txdma, int, 0); MODULE_PARM_DESC(txdma, "Transmit DMA channel"); module_param(rxdma, int, 0); MODULE_PARM_DESC(rxdma, "Receive DMA channel"); module_param(irq, int, 0); MODULE_PARM_DESC(irq, "The interrupt line setting for the SeaLevel card"); module_param(slow, bool, 0); MODULE_PARM_DESC(slow, "Set this for an older Sealevel card such as the 4012"); MODULE_AUTHOR("Alan Cox"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Modular driver for the SeaLevel 4021"); static struct slvl_board *slvl_unit; static int __init slvl_init_module(void) { slvl_unit = slvl_init(io, irq, txdma, rxdma, slow); return slvl_unit ? 0 : -ENODEV; } static void __exit slvl_cleanup_module(void) { if(slvl_unit) slvl_shutdown(slvl_unit); } module_init(slvl_init_module); module_exit(slvl_cleanup_module);