/******************************************************************************
 *
 * Name:	skgeinit.h
 * Project:	Gigabit Ethernet Adapters, Common Modules
 * Version:	$Revision: 1.83 $
 * Date:	$Date: 2003/09/16 14:07:37 $
 * Purpose:	Structures and prototypes for the GE Init Module
 *
 ******************************************************************************/

/******************************************************************************
 *
 *	(C)Copyright 1998-2002 SysKonnect.
 *	(C)Copyright 2002-2003 Marvell.
 *
 *	This program is free software; you can redistribute it and/or modify
 *	it under the terms of the GNU General Public License as published by
 *	the Free Software Foundation; either version 2 of the License, or
 *	(at your option) any later version.
 *
 *	The information in this file is provided "AS IS" without warranty.
 *
 ******************************************************************************/

#ifndef __INC_SKGEINIT_H_
#define __INC_SKGEINIT_H_

#ifdef __cplusplus
extern "C" {
#endif	/* __cplusplus */

/* defines ********************************************************************/

#define SK_TEST_VAL		0x11335577UL

/* modifying Link LED behaviour (used with SkGeLinkLED()) */
#define SK_LNK_OFF		LED_OFF
#define SK_LNK_ON		(LED_ON | LED_BLK_OFF | LED_SYNC_OFF)
#define SK_LNK_BLINK	(LED_ON | LED_BLK_ON  | LED_SYNC_ON)
#define SK_LNK_PERM		(LED_ON | LED_BLK_OFF | LED_SYNC_ON)
#define SK_LNK_TST		(LED_ON | LED_BLK_ON  | LED_SYNC_OFF)

/* parameter 'Mode' when calling SK_HWAC_LINK_LED() */
#define SK_LED_OFF		LED_OFF
#define SK_LED_ACTIVE	(LED_ON | LED_BLK_OFF | LED_SYNC_OFF)
#define SK_LED_STANDBY	(LED_ON | LED_BLK_ON  | LED_SYNC_OFF)

/* addressing LED Registers in SkGeXmitLED() */
#define XMIT_LED_INI	0
#define XMIT_LED_CNT	(RX_LED_VAL - RX_LED_INI)
#define XMIT_LED_CTRL	(RX_LED_CTRL- RX_LED_INI)
#define XMIT_LED_TST	(RX_LED_TST - RX_LED_INI)

/* parameter 'Mode' when calling SkGeXmitLED() */
#define SK_LED_DIS	0
#define SK_LED_ENA	1
#define SK_LED_TST	2

/* Counter and Timer constants, for a host clock of 62.5 MHz */
#define SK_XMIT_DUR		0x002faf08UL	/*  50 ms */
#define SK_BLK_DUR		0x01dcd650UL	/* 500 ms */

#define SK_DPOLL_DEF	0x00ee6b28UL	/* 250 ms at 62.5 MHz */

#define SK_DPOLL_MAX	0x00ffffffUL	/* 268 ms at 62.5 MHz */
										/* 215 ms at 78.12 MHz */

#define SK_FACT_62		100			/* is given in percent */
#define SK_FACT_53		 85         /* on GENESIS:	53.12 MHz */
#define SK_FACT_78		125			/* on YUKON:	78.12 MHz */

/* Timeout values */
#define SK_MAC_TO_53	72			/* MAC arbiter timeout */
#define SK_PKT_TO_53	0x2000		/* Packet arbiter timeout */
#define SK_PKT_TO_MAX	0xffff		/* Maximum value */
#define SK_RI_TO_53		36			/* RAM interface timeout */

#define SK_PHY_ACC_TO	600000		/* PHY access timeout */

/* RAM Buffer High Pause Threshold values */
#define SK_RB_ULPP		( 8 * 1024)	/* Upper Level in kB/8 */
#define SK_RB_LLPP_S	(10 * 1024)	/* Lower Level for small Queues */
#define SK_RB_LLPP_B	(16 * 1024)	/* Lower Level for big Queues */

#ifndef SK_BMU_RX_WM
#define SK_BMU_RX_WM	0x600		/* BMU Rx Watermark */
#endif
#ifndef SK_BMU_TX_WM
#define SK_BMU_TX_WM	0x600		/* BMU Tx Watermark */
#endif

/* XMAC II Rx High Watermark */
#define SK_XM_RX_HI_WM	0x05aa		/* 1450 */

/* XMAC II Tx Threshold */
#define SK_XM_THR_REDL	0x01fb		/* .. for redundant link usage */
#define SK_XM_THR_SL	0x01fb		/* .. for single link adapters */
#define SK_XM_THR_MULL	0x01fb		/* .. for multiple link usage */
#define SK_XM_THR_JUMBO	0x03fc		/* .. for jumbo frame usage */

/* values for GIPortUsage */
#define SK_RED_LINK		1		/* redundant link usage */
#define SK_MUL_LINK		2		/* multiple link usage */
#define SK_JUMBO_LINK	3		/* driver uses jumbo frames */

/* Minimum RAM Buffer Rx Queue Size */
#define SK_MIN_RXQ_SIZE	16		/* 16 kB */

/* Minimum RAM Buffer Tx Queue Size */
#define SK_MIN_TXQ_SIZE	16		/* 16 kB */

/* Queue Size units */
#define QZ_UNITS		0x7
#define QZ_STEP			8

/* Percentage of queue size from whole memory */
/* 80 % for receive */
#define RAM_QUOTA_RX	80L
/* 0% for sync transfer */
#define	RAM_QUOTA_SYNC	0L
/* the rest (20%) is taken for async transfer */

/* Get the rounded queue size in Bytes in 8k steps */
#define ROUND_QUEUE_SIZE(SizeInBytes)					\
	((((unsigned long) (SizeInBytes) + (QZ_STEP*1024L)-1) / 1024) &	\
	~(QZ_STEP-1))

/* Get the rounded queue size in KBytes in 8k steps */
#define ROUND_QUEUE_SIZE_KB(Kilobytes) \
	ROUND_QUEUE_SIZE((Kilobytes) * 1024L)

/* Types of RAM Buffer Queues */
#define SK_RX_SRAM_Q	1	/* small receive queue */
#define SK_RX_BRAM_Q	2	/* big receive queue */
#define SK_TX_RAM_Q		3	/* small or big transmit queue */

/* parameter 'Dir' when calling SkGeStopPort() */
#define SK_STOP_TX	1	/* Stops the transmit path, resets the XMAC */
#define SK_STOP_RX	2	/* Stops the receive path */
#define SK_STOP_ALL	3	/* Stops Rx and Tx path, resets the XMAC */

/* parameter 'RstMode' when calling SkGeStopPort() */
#define SK_SOFT_RST	1	/* perform a software reset */
#define SK_HARD_RST	2	/* perform a hardware reset */

/* Init Levels */
#define SK_INIT_DATA	0	/* Init level 0: init data structures */
#define SK_INIT_IO		1	/* Init level 1: init with IOs */
#define SK_INIT_RUN		2	/* Init level 2: init for run time */

/* Link Mode Parameter */
#define SK_LMODE_HALF		1	/* Half Duplex Mode */
#define SK_LMODE_FULL		2	/* Full Duplex Mode */
#define SK_LMODE_AUTOHALF	3	/* AutoHalf Duplex Mode */
#define SK_LMODE_AUTOFULL	4	/* AutoFull Duplex Mode */
#define SK_LMODE_AUTOBOTH	5	/* AutoBoth Duplex Mode */
#define SK_LMODE_AUTOSENSE	6	/* configured mode auto sensing */
#define SK_LMODE_INDETERMINATED	7	/* indeterminated */

/* Auto-negotiation timeout in 100ms granularity */
#define SK_AND_MAX_TO		6	/* Wait 600 msec before link comes up */

/* Auto-negotiation error codes */
#define SK_AND_OK			0	/* no error */
#define SK_AND_OTHER		1	/* other error than below */
#define SK_AND_DUP_CAP		2	/* Duplex capabilities error */


/* Link Speed Capabilities */
#define SK_LSPEED_CAP_AUTO			(1<<0)	/* Automatic resolution */
#define SK_LSPEED_CAP_10MBPS		(1<<1)	/* 10 Mbps */
#define SK_LSPEED_CAP_100MBPS		(1<<2)	/* 100 Mbps */
#define SK_LSPEED_CAP_1000MBPS		(1<<3)	/* 1000 Mbps */
#define SK_LSPEED_CAP_INDETERMINATED (1<<4) /* indeterminated */

/* Link Speed Parameter */
#define SK_LSPEED_AUTO				1	/* Automatic resolution */
#define SK_LSPEED_10MBPS			2	/* 10 Mbps */
#define SK_LSPEED_100MBPS			3	/* 100 Mbps */
#define SK_LSPEED_1000MBPS			4	/* 1000 Mbps */
#define SK_LSPEED_INDETERMINATED	5	/* indeterminated */

/* Link Speed Current State */
#define SK_LSPEED_STAT_UNKNOWN		1
#define SK_LSPEED_STAT_10MBPS		2
#define SK_LSPEED_STAT_100MBPS 		3
#define SK_LSPEED_STAT_1000MBPS		4
#define SK_LSPEED_STAT_INDETERMINATED 5


/* Link Capability Parameter */
#define SK_LMODE_CAP_HALF		(1<<0)	/* Half Duplex Mode */
#define SK_LMODE_CAP_FULL		(1<<1)	/* Full Duplex Mode */
#define SK_LMODE_CAP_AUTOHALF	(1<<2)	/* AutoHalf Duplex Mode */
#define SK_LMODE_CAP_AUTOFULL	(1<<3)	/* AutoFull Duplex Mode */
#define SK_LMODE_CAP_INDETERMINATED (1<<4) /* indeterminated */

/* Link Mode Current State */
#define SK_LMODE_STAT_UNKNOWN	1	/* Unknown Duplex Mode */
#define SK_LMODE_STAT_HALF		2	/* Half Duplex Mode */
#define SK_LMODE_STAT_FULL		3	/* Full Duplex Mode */
#define SK_LMODE_STAT_AUTOHALF	4	/* Half Duplex Mode obtained by Auto-Neg */
#define SK_LMODE_STAT_AUTOFULL	5	/* Full Duplex Mode obtained by Auto-Neg */
#define SK_LMODE_STAT_INDETERMINATED 6	/* indeterminated */

/* Flow Control Mode Parameter (and capabilities) */
#define SK_FLOW_MODE_NONE		1	/* No Flow-Control */
#define SK_FLOW_MODE_LOC_SEND	2	/* Local station sends PAUSE */
#define SK_FLOW_MODE_SYMMETRIC	3	/* Both stations may send PAUSE */
#define SK_FLOW_MODE_SYM_OR_REM	4	/* Both stations may send PAUSE or
					 * just the remote station may send PAUSE
					 */
#define SK_FLOW_MODE_INDETERMINATED 5	/* indeterminated */

/* Flow Control Status Parameter */
#define SK_FLOW_STAT_NONE		1	/* No Flow Control */
#define SK_FLOW_STAT_REM_SEND	2	/* Remote Station sends PAUSE */
#define SK_FLOW_STAT_LOC_SEND	3	/* Local station sends PAUSE */
#define SK_FLOW_STAT_SYMMETRIC	4	/* Both station may send PAUSE */
#define SK_FLOW_STAT_INDETERMINATED 5	/* indeterminated */

/* Master/Slave Mode Capabilities */
#define SK_MS_CAP_AUTO		(1<<0)	/* Automatic resolution */
#define SK_MS_CAP_MASTER	(1<<1)	/* This station is master */
#define SK_MS_CAP_SLAVE		(1<<2)	/* This station is slave */
#define SK_MS_CAP_INDETERMINATED (1<<3)	/* indeterminated */

/* Set Master/Slave Mode Parameter (and capabilities) */
#define SK_MS_MODE_AUTO		1	/* Automatic resolution */
#define SK_MS_MODE_MASTER	2	/* This station is master */
#define SK_MS_MODE_SLAVE	3	/* This station is slave */
#define SK_MS_MODE_INDETERMINATED 4	/* indeterminated */

/* Master/Slave Status Parameter */
#define SK_MS_STAT_UNSET	1	/* The M/S status is not set */
#define SK_MS_STAT_MASTER	2	/* This station is master */
#define SK_MS_STAT_SLAVE	3	/* This station is slave */
#define SK_MS_STAT_FAULT	4	/* M/S resolution failed */
#define SK_MS_STAT_INDETERMINATED 5	/* indeterminated */

/* parameter 'Mode' when calling SkXmSetRxCmd() */
#define SK_STRIP_FCS_ON		(1<<0)	/* Enable  FCS stripping of Rx frames */
#define SK_STRIP_FCS_OFF	(1<<1)	/* Disable FCS stripping of Rx frames */
#define SK_STRIP_PAD_ON		(1<<2)	/* Enable  pad byte stripping of Rx fr */
#define SK_STRIP_PAD_OFF	(1<<3)	/* Disable pad byte stripping of Rx fr */
#define SK_LENERR_OK_ON		(1<<4)	/* Don't chk fr for in range len error */
#define SK_LENERR_OK_OFF	(1<<5)	/* Check frames for in range len error */
#define SK_BIG_PK_OK_ON		(1<<6)	/* Don't set Rx Error bit for big frames */
#define SK_BIG_PK_OK_OFF	(1<<7)	/* Set Rx Error bit for big frames */
#define SK_SELF_RX_ON		(1<<8)	/* Enable  Rx of own packets */
#define SK_SELF_RX_OFF		(1<<9)	/* Disable Rx of own packets */

/* parameter 'Para' when calling SkMacSetRxTxEn() */
#define SK_MAC_LOOPB_ON		(1<<0)	/* Enable  MAC Loopback Mode */
#define SK_MAC_LOOPB_OFF	(1<<1)	/* Disable MAC Loopback Mode */
#define SK_PHY_LOOPB_ON		(1<<2)	/* Enable  PHY Loopback Mode */
#define SK_PHY_LOOPB_OFF	(1<<3)	/* Disable PHY Loopback Mode */
#define SK_PHY_FULLD_ON		(1<<4)	/* Enable  GMII Full Duplex */
#define SK_PHY_FULLD_OFF	(1<<5)	/* Disable GMII Full Duplex */

/* States of PState */
#define SK_PRT_RESET	0	/* the port is reset */
#define SK_PRT_STOP		1	/* the port is stopped (similar to SW reset) */
#define SK_PRT_INIT		2	/* the port is initialized */
#define SK_PRT_RUN		3	/* the port has an active link */

/* PHY power down modes */
#define PHY_PM_OPERATIONAL_MODE		0	/* PHY operational mode */
#define PHY_PM_DEEP_SLEEP			1	/* coma mode --> minimal power */
#define PHY_PM_IEEE_POWER_DOWN		2	/* IEEE 22.2.4.1.5 compl. power down */
#define PHY_PM_ENERGY_DETECT		3	/* energy detect */
#define PHY_PM_ENERGY_DETECT_PLUS	4	/* energy detect plus */

/* Default receive frame limit for Workaround of XMAC Errata */
#define SK_DEF_RX_WA_LIM	SK_CONSTU64(100)

/* values for GILedBlinkCtrl (LED Blink Control) */
#define SK_ACT_LED_BLINK	(1<<0)	/* Active LED blinking */
#define SK_DUP_LED_NORMAL	(1<<1)	/* Duplex LED normal */
#define SK_LED_LINK100_ON	(1<<2)	/* Link 100M LED on */

/* Link Partner Status */
#define SK_LIPA_UNKNOWN	0	/* Link partner is in unknown state */
#define SK_LIPA_MANUAL	1	/* Link partner is in detected manual state */
#define SK_LIPA_AUTO	2	/* Link partner is in auto-negotiation state */

/* Maximum Restarts before restart is ignored (3Com WA) */
#define SK_MAX_LRESTART	3	/* Max. 3 times the link is restarted */

/* Max. Auto-neg. timeouts before link detection in sense mode is reset */
#define SK_MAX_ANEG_TO	10	/* Max. 10 times the sense mode is reset */

/* structures *****************************************************************/

/*
 * MAC specific functions
 */
typedef struct s_GeMacFunc {
	int  (*pFnMacUpdateStats)(SK_AC *pAC, SK_IOC IoC, unsigned int Port);
	int  (*pFnMacStatistic)(SK_AC *pAC, SK_IOC IoC, unsigned int Port,
							SK_U16 StatAddr, SK_U32 SK_FAR *pVal);
	int  (*pFnMacResetCounter)(SK_AC *pAC, SK_IOC IoC, unsigned int Port);
	int  (*pFnMacOverflow)(SK_AC *pAC, SK_IOC IoC, unsigned int Port,
						   SK_U16 IStatus, SK_U64 SK_FAR *pVal);
} SK_GEMACFUNC;

/*
 * Port Structure
 */
typedef	struct s_GePort {
#ifndef SK_DIAG
	SK_TIMER	PWaTimer;	/* Workaround Timer */
	SK_TIMER	HalfDupChkTimer;
#endif /* SK_DIAG */
	SK_U32	PPrevShorts;	/* Previous Short Counter checking */
	SK_U32	PPrevFcs;		/* Previous FCS Error Counter checking */
	SK_U64	PPrevRx;		/* Previous RxOk Counter checking */
	SK_U64	PRxLim;			/* Previous RxOk Counter checking */
	SK_U64	LastOctets;		/* For half duplex hang check */
	int		PLinkResCt;		/* Link Restart Counter */
	int		PAutoNegTimeOut;/* Auto-negotiation timeout current value */
	int		PAutoNegTOCt;	/* Auto-negotiation Timeout Counter */
	int		PRxQSize;		/* Port Rx Queue Size in kB */
	int		PXSQSize;		/* Port Synchronous  Transmit Queue Size in kB */
	int		PXAQSize;		/* Port Asynchronous Transmit Queue Size in kB */
	SK_U32	PRxQRamStart;	/* Receive Queue RAM Buffer Start Address */
	SK_U32	PRxQRamEnd;		/* Receive Queue RAM Buffer End Address */
	SK_U32	PXsQRamStart;	/* Sync Tx Queue RAM Buffer Start Address */
	SK_U32	PXsQRamEnd;		/* Sync Tx Queue RAM Buffer End Address */
	SK_U32	PXaQRamStart;	/* Async Tx Queue RAM Buffer Start Address */
	SK_U32	PXaQRamEnd;		/* Async Tx Queue RAM Buffer End Address */
	SK_U32	PRxOverCnt;		/* Receive Overflow Counter */
	int		PRxQOff;		/* Rx Queue Address Offset */
	int		PXsQOff;		/* Synchronous Tx Queue Address Offset */
	int		PXaQOff;		/* Asynchronous Tx Queue Address Offset */
	int		PhyType;		/* PHY used on this port */
	int		PState;			/* Port status (reset, stop, init, run) */
	SK_U16	PhyId1;			/* PHY Id1 on this port */
	SK_U16	PhyAddr;		/* MDIO/MDC PHY address */
	SK_U16	PIsave;			/* Saved Interrupt status word */
	SK_U16	PSsave;			/* Saved PHY status word */
	SK_U16	PGmANegAdv;		/* Saved GPhy AutoNegAdvertisment register */
	SK_BOOL	PHWLinkUp;		/* The hardware Link is up (wiring) */
	SK_BOOL	PLinkBroken;	/* Is Link broken ? */
	SK_BOOL	PCheckPar;		/* Do we check for parity errors ? */
	SK_BOOL	HalfDupTimerActive;
	SK_U8	PLinkCap;		/* Link Capabilities */
	SK_U8	PLinkModeConf;	/* Link Mode configured */
	SK_U8	PLinkMode;		/* Link Mode currently used */
	SK_U8	PLinkModeStatus;/* Link Mode Status */
	SK_U8	PLinkSpeedCap;	/* Link Speed Capabilities(10/100/1000 Mbps) */
	SK_U8	PLinkSpeed;		/* configured Link Speed (10/100/1000 Mbps) */
	SK_U8	PLinkSpeedUsed;	/* current Link Speed (10/100/1000 Mbps) */
	SK_U8	PFlowCtrlCap;	/* Flow Control Capabilities */
	SK_U8	PFlowCtrlMode;	/* Flow Control Mode */
	SK_U8	PFlowCtrlStatus;/* Flow Control Status */
	SK_U8	PMSCap;			/* Master/Slave Capabilities */
	SK_U8	PMSMode;		/* Master/Slave Mode */
	SK_U8	PMSStatus;		/* Master/Slave Status */
	SK_BOOL	PAutoNegFail;	/* Auto-negotiation fail flag */
	SK_U8	PLipaAutoNeg;	/* Auto-negotiation possible with Link Partner */
	SK_U8	PCableLen;		/* Cable Length */
	SK_U8	PMdiPairLen[4];	/* MDI[0..3] Pair Length */
	SK_U8	PMdiPairSts[4];	/* MDI[0..3] Pair Diagnostic Status */
	SK_U8	PPhyPowerState;	/* PHY current power state */
	int		PMacColThres;	/* MAC Collision Threshold */
	int		PMacJamLen;		/* MAC Jam length */
	int		PMacJamIpgVal;	/* MAC Jam IPG */
	int		PMacJamIpgData;	/* MAC IPG Jam to Data */
	int		PMacIpgData;	/* MAC Data IPG */
	SK_BOOL PMacLimit4;		/* reset collision counter and backoff algorithm */
} SK_GEPORT;

/*
 * Gigabit Ethernet Initialization Struct
 * (has to be included in the adapter context)
 */
typedef	struct s_GeInit {
	int			GIChipId;		/* Chip Identification Number */
	int			GIChipRev;		/* Chip Revision Number */
	SK_U8		GIPciHwRev;		/* PCI HW Revision Number */
	SK_BOOL		GIGenesis;		/* Genesis adapter ? */
	SK_BOOL		GIYukon;		/* YUKON-A1/Bx chip */
	SK_BOOL		GIYukonLite;	/* YUKON-Lite chip */
	SK_BOOL		GICopperType;	/* Copper Type adapter ? */
	SK_BOOL		GIPciSlot64;	/* 64-bit PCI Slot */
	SK_BOOL		GIPciClock66;	/* 66 MHz PCI Clock */
	SK_BOOL		GIVauxAvail;	/* VAUX available (YUKON) */
	SK_BOOL		GIYukon32Bit;	/* 32-Bit YUKON adapter */
	SK_U16		GILedBlinkCtrl;	/* LED Blink Control */
	int			GIMacsFound;	/* Number of MACs found on this adapter */
	int			GIMacType;		/* MAC Type used on this adapter */
	int			GIHstClkFact;	/* Host Clock Factor (62.5 / HstClk * 100) */
	int			GIPortUsage;	/* Driver Port Usage */
	int			GILevel;		/* Initialization Level completed */
	int			GIRamSize;		/* The RAM size of the adapter in kB */
	int			GIWolOffs;		/* WOL Register Offset (HW-Bug in Rev. A) */
	SK_U32		GIRamOffs;		/* RAM Address Offset for addr calculation */
	SK_U32		GIPollTimerVal;	/* Descr. Poll Timer Init Val (HstClk ticks) */
	SK_U32		GIValIrqMask;	/* Value for Interrupt Mask */
	SK_U32		GITimeStampCnt;	/* Time Stamp High Counter (YUKON only) */
	SK_GEPORT	GP[SK_MAX_MACS];/* Port Dependent Information */
	SK_GEMACFUNC GIFunc;		/* MAC depedent functions */
} SK_GEINIT;

/*
 * Error numbers and messages for skxmac2.c and skgeinit.c
 */
#define SKERR_HWI_E001		(SK_ERRBASE_HWINIT)
#define SKERR_HWI_E001MSG	"SkXmClrExactAddr() has got illegal parameters"
#define SKERR_HWI_E002		(SKERR_HWI_E001+1)
#define SKERR_HWI_E002MSG	"SkGeInit(): Level 1 call missing"
#define SKERR_HWI_E003		(SKERR_HWI_E002+1)
#define SKERR_HWI_E003MSG	"SkGeInit() called with illegal init Level"
#define SKERR_HWI_E004		(SKERR_HWI_E003+1)
#define SKERR_HWI_E004MSG	"SkGeInitPort(): Queue Size illegal configured"
#define SKERR_HWI_E005		(SKERR_HWI_E004+1)
#define SKERR_HWI_E005MSG	"SkGeInitPort(): cannot init running ports"
#define SKERR_HWI_E006		(SKERR_HWI_E005+1)
#define SKERR_HWI_E006MSG	"SkGeMacInit(): PState does not match HW state"
#define SKERR_HWI_E007		(SKERR_HWI_E006+1)
#define SKERR_HWI_E007MSG	"SkXmInitDupMd() called with invalid Dup Mode"
#define SKERR_HWI_E008		(SKERR_HWI_E007+1)
#define SKERR_HWI_E008MSG	"SkXmSetRxCmd() called with invalid Mode"
#define SKERR_HWI_E009		(SKERR_HWI_E008+1)
#define SKERR_HWI_E009MSG	"SkGeCfgSync() called although PXSQSize zero"
#define SKERR_HWI_E010		(SKERR_HWI_E009+1)
#define SKERR_HWI_E010MSG	"SkGeCfgSync() called with invalid parameters"
#define SKERR_HWI_E011		(SKERR_HWI_E010+1)
#define SKERR_HWI_E011MSG	"SkGeInitPort(): Receive Queue Size too small"
#define SKERR_HWI_E012		(SKERR_HWI_E011+1)
#define SKERR_HWI_E012MSG	"SkGeInitPort(): invalid Queue Size specified"
#define SKERR_HWI_E013		(SKERR_HWI_E012+1)
#define SKERR_HWI_E013MSG	"SkGeInitPort(): cfg changed for running queue"
#define SKERR_HWI_E014		(SKERR_HWI_E013+1)
#define SKERR_HWI_E014MSG	"SkGeInitPort(): unknown GIPortUsage specified"
#define SKERR_HWI_E015		(SKERR_HWI_E014+1)
#define SKERR_HWI_E015MSG	"Illegal Link mode parameter"
#define SKERR_HWI_E016		(SKERR_HWI_E015+1)
#define SKERR_HWI_E016MSG	"Illegal Flow control mode parameter"
#define SKERR_HWI_E017		(SKERR_HWI_E016+1)
#define SKERR_HWI_E017MSG	"Illegal value specified for GIPollTimerVal"
#define SKERR_HWI_E018		(SKERR_HWI_E017+1)
#define SKERR_HWI_E018MSG	"FATAL: SkGeStopPort() does not terminate (Tx)"
#define SKERR_HWI_E019		(SKERR_HWI_E018+1)
#define SKERR_HWI_E019MSG	"Illegal Speed parameter"
#define SKERR_HWI_E020		(SKERR_HWI_E019+1)
#define SKERR_HWI_E020MSG	"Illegal Master/Slave parameter"
#define SKERR_HWI_E021		(SKERR_HWI_E020+1)
#define	SKERR_HWI_E021MSG	"MacUpdateStats(): cannot update statistic counter"
#define	SKERR_HWI_E022		(SKERR_HWI_E021+1)
#define	SKERR_HWI_E022MSG	"MacStatistic(): illegal statistic base address"
#define SKERR_HWI_E023		(SKERR_HWI_E022+1)
#define SKERR_HWI_E023MSG	"SkGeInitPort(): Transmit Queue Size too small"
#define SKERR_HWI_E024		(SKERR_HWI_E023+1)
#define SKERR_HWI_E024MSG	"FATAL: SkGeStopPort() does not terminate (Rx)"
#define SKERR_HWI_E025		(SKERR_HWI_E024+1)
#define SKERR_HWI_E025MSG	""

/* function prototypes ********************************************************/

#ifndef	SK_KR_PROTO

/*
 * public functions in skgeinit.c
 */
extern void	SkGePollTxD(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port,
	SK_BOOL PollTxD);

extern void	SkGeYellowLED(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		State);

extern int	SkGeCfgSync(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port,
	SK_U32	IntTime,
	SK_U32	LimCount,
	int		SyncMode);

extern void	SkGeLoadLnkSyncCnt(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port,
	SK_U32	CntVal);

extern void	SkGeStopPort(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port,
	int		Dir,
	int		RstMode);

extern int	SkGeInit(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Level);

extern void	SkGeDeInit(
	SK_AC	*pAC,
	SK_IOC	IoC);

extern int	SkGeInitPort(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port);

extern void	SkGeXmitLED(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Led,
	int		Mode);

extern int	SkGeInitAssignRamToQueues(
	SK_AC	*pAC,
	int		ActivePort,
	SK_BOOL	DualNet);

/*
 * public functions in skxmac2.c
 */
extern void SkMacRxTxDisable(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port);

extern void	SkMacSoftRst(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port);

extern void	SkMacHardRst(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port);

extern void	SkXmInitMac(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port);

extern void	SkGmInitMac(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port);

extern void SkMacInitPhy(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port,
	SK_BOOL	DoLoop);

extern void SkMacIrqDisable(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port);

extern void	SkMacFlushTxFifo(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port);

extern void	SkMacIrq(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port);

extern int	SkMacAutoNegDone(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port);

extern void	SkMacAutoNegLipaPhy(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port,
	SK_U16	IStatus);

extern int  SkMacRxTxEnable(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port);

extern void	SkMacPromiscMode(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port,
	SK_BOOL	Enable);

extern void	SkMacHashing(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port,
	SK_BOOL	Enable);

extern void	SkXmPhyRead(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port,
	int		Addr,
	SK_U16	SK_FAR *pVal);

extern void	SkXmPhyWrite(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port,
	int		Addr,
	SK_U16	Val);

extern void	SkGmPhyRead(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port,
	int		Addr,
	SK_U16	SK_FAR *pVal);

extern void	SkGmPhyWrite(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port,
	int		Addr,
	SK_U16	Val);

extern void	SkXmClrExactAddr(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port,
	int		StartNum,
	int		StopNum);

extern void	SkXmAutoNegLipaXmac(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port,
	SK_U16	IStatus);

extern int SkXmUpdateStats(
	SK_AC	*pAC,
	SK_IOC	IoC,
	unsigned int Port);

extern int SkGmUpdateStats(
	SK_AC	*pAC,
	SK_IOC	IoC,
	unsigned int Port);

extern int SkXmMacStatistic(
	SK_AC	*pAC,
	SK_IOC	IoC,
	unsigned int Port,
	SK_U16	StatAddr,
	SK_U32	SK_FAR *pVal);

extern int SkGmMacStatistic(
	SK_AC	*pAC,
	SK_IOC	IoC,
	unsigned int Port,
	SK_U16	StatAddr,
	SK_U32	SK_FAR *pVal);

extern int SkXmResetCounter(
	SK_AC	*pAC,
	SK_IOC	IoC,
	unsigned int Port);

extern int SkGmResetCounter(
	SK_AC	*pAC,
	SK_IOC	IoC,
	unsigned int Port);

extern int SkXmOverflowStatus(
	SK_AC	*pAC,
	SK_IOC	IoC,
	unsigned int Port,
	SK_U16  IStatus,
	SK_U64	SK_FAR *pStatus);

extern int SkGmOverflowStatus(
	SK_AC	*pAC,
	SK_IOC	IoC,
	unsigned int Port,
	SK_U16	MacStatus,
	SK_U64	SK_FAR *pStatus);

extern int SkGmCableDiagStatus(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port,
	SK_BOOL	StartTest);

#ifdef SK_DIAG
extern void	SkGePhyRead(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port,
	int		Addr,
	SK_U16	*pVal);

extern void	SkGePhyWrite(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port,
	int		Addr,
	SK_U16	Val);

extern void	SkMacSetRxCmd(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port,
	int		Mode);
extern void	SkMacCrcGener(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port,
	SK_BOOL	Enable);
extern void	SkMacTimeStamp(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port,
	SK_BOOL	Enable);
extern void	SkXmSendCont(
	SK_AC	*pAC,
	SK_IOC	IoC,
	int		Port,
	SK_BOOL	Enable);
#endif /* SK_DIAG */

#else	/* SK_KR_PROTO */

/*
 * public functions in skgeinit.c
 */
extern void	SkGePollTxD();
extern void	SkGeYellowLED();
extern int	SkGeCfgSync();
extern void	SkGeLoadLnkSyncCnt();
extern void	SkGeStopPort();
extern int	SkGeInit();
extern void	SkGeDeInit();
extern int	SkGeInitPort();
extern void	SkGeXmitLED();
extern int	SkGeInitAssignRamToQueues();

/*
 * public functions in skxmac2.c
 */
extern void SkMacRxTxDisable();
extern void	SkMacSoftRst();
extern void	SkMacHardRst();
extern void SkMacInitPhy();
extern int  SkMacRxTxEnable();
extern void SkMacPromiscMode();
extern void SkMacHashing();
extern void SkMacIrqDisable();
extern void	SkMacFlushTxFifo();
extern void	SkMacIrq();
extern int	SkMacAutoNegDone();
extern void	SkMacAutoNegLipaPhy();
extern void	SkXmInitMac();
extern void	SkXmPhyRead();
extern void	SkXmPhyWrite();
extern void	SkGmInitMac();
extern void	SkGmPhyRead();
extern void	SkGmPhyWrite();
extern void	SkXmClrExactAddr();
extern void	SkXmAutoNegLipaXmac();
extern int	SkXmUpdateStats();
extern int	SkGmUpdateStats();
extern int	SkXmMacStatistic();
extern int	SkGmMacStatistic();
extern int	SkXmResetCounter();
extern int	SkGmResetCounter();
extern int	SkXmOverflowStatus();
extern int	SkGmOverflowStatus();
extern int	SkGmCableDiagStatus();

#ifdef SK_DIAG
extern void	SkGePhyRead();
extern void	SkGePhyWrite();
extern void	SkMacSetRxCmd();
extern void	SkMacCrcGener();
extern void	SkMacTimeStamp();
extern void	SkXmSendCont();
#endif /* SK_DIAG */

#endif	/* SK_KR_PROTO */

#ifdef __cplusplus
}
#endif	/* __cplusplus */

#endif	/* __INC_SKGEINIT_H_ */