/********************************************************************* * * Filename: tekram.c * Version: 1.3 * Description: Implementation of the Tekram IrMate IR-210B dongle * Status: Experimental. * Author: Dag Brattli <dagb@cs.uit.no> * Created at: Wed Oct 21 20:02:35 1998 * Modified at: Sun Oct 27 22:02:38 2002 * Modified by: Martin Diehl <mad@mdiehl.de> * * Copyright (c) 1998-1999 Dag Brattli, * Copyright (c) 2002 Martin Diehl, * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * Neither Dag Brattli nor University of Tromsø admit liability nor * provide warranty for any of this software. This material is * provided "AS-IS" and at no charge. * ********************************************************************/ #include <linux/module.h> #include <linux/delay.h> #include <linux/init.h> #include <net/irda/irda.h> #include "sir-dev.h" static int tekram_delay = 150; /* default is 150 ms */ module_param(tekram_delay, int, 0); MODULE_PARM_DESC(tekram_delay, "tekram dongle write complete delay"); static int tekram_open(struct sir_dev *); static int tekram_close(struct sir_dev *); static int tekram_change_speed(struct sir_dev *, unsigned); static int tekram_reset(struct sir_dev *); #define TEKRAM_115200 0x00 #define TEKRAM_57600 0x01 #define TEKRAM_38400 0x02 #define TEKRAM_19200 0x03 #define TEKRAM_9600 0x04 #define TEKRAM_PW 0x10 /* Pulse select bit */ static struct dongle_driver tekram = { .owner = THIS_MODULE, .driver_name = "Tekram IR-210B", .type = IRDA_TEKRAM_DONGLE, .open = tekram_open, .close = tekram_close, .reset = tekram_reset, .set_speed = tekram_change_speed, }; static int __init tekram_sir_init(void) { if (tekram_delay < 1 || tekram_delay > 500) tekram_delay = 200; IRDA_DEBUG(1, "%s - using %d ms delay\n", tekram.driver_name, tekram_delay); return irda_register_dongle(&tekram); } static void __exit tekram_sir_cleanup(void) { irda_unregister_dongle(&tekram); } static int tekram_open(struct sir_dev *dev) { struct qos_info *qos = &dev->qos; IRDA_DEBUG(2, "%s()\n", __FUNCTION__); sirdev_set_dtr_rts(dev, TRUE, TRUE); qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200; qos->min_turn_time.bits = 0x01; /* Needs at least 10 ms */ irda_qos_bits_to_value(qos); /* irda thread waits 50 msec for power settling */ return 0; } static int tekram_close(struct sir_dev *dev) { IRDA_DEBUG(2, "%s()\n", __FUNCTION__); /* Power off dongle */ sirdev_set_dtr_rts(dev, FALSE, FALSE); return 0; } /* * Function tekram_change_speed (dev, state, speed) * * Set the speed for the Tekram IRMate 210 type dongle. Warning, this * function must be called with a process context! * * Algorithm * 1. clear DTR * 2. set RTS, and wait at least 7 us * 3. send Control Byte to the IR-210 through TXD to set new baud rate * wait until the stop bit of Control Byte is sent (for 9600 baud rate, * it takes about 100 msec) * * [oops, why 100 msec? sending 1 byte (10 bits) takes 1.05 msec * - is this probably to compensate for delays in tty layer?] * * 5. clear RTS (return to NORMAL Operation) * 6. wait at least 50 us, new setting (baud rate, etc) takes effect here * after */ #define TEKRAM_STATE_WAIT_SPEED (SIRDEV_STATE_DONGLE_SPEED + 1) static int tekram_change_speed(struct sir_dev *dev, unsigned speed) { unsigned state = dev->fsm.substate; unsigned delay = 0; u8 byte; static int ret = 0; IRDA_DEBUG(2, "%s()\n", __FUNCTION__); switch(state) { case SIRDEV_STATE_DONGLE_SPEED: switch (speed) { default: speed = 9600; ret = -EINVAL; /* fall thru */ case 9600: byte = TEKRAM_PW|TEKRAM_9600; break; case 19200: byte = TEKRAM_PW|TEKRAM_19200; break; case 38400: byte = TEKRAM_PW|TEKRAM_38400; break; case 57600: byte = TEKRAM_PW|TEKRAM_57600; break; case 115200: byte = TEKRAM_115200; break; } /* Set DTR, Clear RTS */ sirdev_set_dtr_rts(dev, TRUE, FALSE); /* Wait at least 7us */ udelay(14); /* Write control byte */ sirdev_raw_write(dev, &byte, 1); dev->speed = speed; state = TEKRAM_STATE_WAIT_SPEED; delay = tekram_delay; break; case TEKRAM_STATE_WAIT_SPEED: /* Set DTR, Set RTS */ sirdev_set_dtr_rts(dev, TRUE, TRUE); udelay(50); break; default: IRDA_ERROR("%s - undefined state %d\n", __FUNCTION__, state); ret = -EINVAL; break; } dev->fsm.substate = state; return (delay > 0) ? delay : ret; } /* * Function tekram_reset (driver) * * This function resets the tekram dongle. Warning, this function * must be called with a process context!! * * Algorithm: * 0. Clear RTS and DTR, and wait 50 ms (power off the IR-210 ) * 1. clear RTS * 2. set DTR, and wait at least 1 ms * 3. clear DTR to SPACE state, wait at least 50 us for further * operation */ static int tekram_reset(struct sir_dev *dev) { IRDA_DEBUG(2, "%s()\n", __FUNCTION__); /* Clear DTR, Set RTS */ sirdev_set_dtr_rts(dev, FALSE, TRUE); /* Should sleep 1 ms */ msleep(1); /* Set DTR, Set RTS */ sirdev_set_dtr_rts(dev, TRUE, TRUE); /* Wait at least 50 us */ udelay(75); dev->speed = 9600; return 0; } MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>"); MODULE_DESCRIPTION("Tekram IrMate IR-210B dongle driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("irda-dongle-0"); /* IRDA_TEKRAM_DONGLE */ module_init(tekram_sir_init); module_exit(tekram_sir_cleanup);