/* * drivers/net/gianfar_mii.c * * Gianfar Ethernet Driver -- MIIM bus implementation * Provides Bus interface for MIIM regs * * Author: Andy Fleming * Maintainer: Kumar Gala * * Copyright (c) 2002-2004 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * */ #include <linux/kernel.h> #include <linux/string.h> #include <linux/errno.h> #include <linux/unistd.h> #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/init.h> #include <linux/delay.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/skbuff.h> #include <linux/spinlock.h> #include <linux/mm.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/crc32.h> #include <linux/mii.h> #include <linux/phy.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/uaccess.h> #include "gianfar.h" #include "gianfar_mii.h" /* * Write value to the PHY at mii_id at register regnum, * on the bus attached to the local interface, which may be different from the * generic mdio bus (tied to a single interface), waiting until the write is * done before returning. This is helpful in programming interfaces like * the TBI which control interfaces like onchip SERDES and are always tied to * the local mdio pins, which may not be the same as system mdio bus, used for * controlling the external PHYs, for example. */ int gfar_local_mdio_write(struct gfar_mii *regs, int mii_id, int regnum, u16 value) { /* Set the PHY address and the register address we want to write */ gfar_write(®s->miimadd, (mii_id << 8) | regnum); /* Write out the value we want */ gfar_write(®s->miimcon, value); /* Wait for the transaction to finish */ while (gfar_read(®s->miimind) & MIIMIND_BUSY) cpu_relax(); return 0; } /* * Read the bus for PHY at addr mii_id, register regnum, and * return the value. Clears miimcom first. All PHY operation * done on the bus attached to the local interface, * which may be different from the generic mdio bus * This is helpful in programming interfaces like * the TBI which, inturn, control interfaces like onchip SERDES * and are always tied to the local mdio pins, which may not be the * same as system mdio bus, used for controlling the external PHYs, for eg. */ int gfar_local_mdio_read(struct gfar_mii *regs, int mii_id, int regnum) { u16 value; /* Set the PHY address and the register address we want to read */ gfar_write(®s->miimadd, (mii_id << 8) | regnum); /* Clear miimcom, and then initiate a read */ gfar_write(®s->miimcom, 0); gfar_write(®s->miimcom, MII_READ_COMMAND); /* Wait for the transaction to finish */ while (gfar_read(®s->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY)) cpu_relax(); /* Grab the value of the register from miimstat */ value = gfar_read(®s->miimstat); return value; } /* Write value to the PHY at mii_id at register regnum, * on the bus, waiting until the write is done before returning. * All PHY configuration is done through the TSEC1 MIIM regs */ int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value) { struct gfar_mii __iomem *regs = (void __iomem *)bus->priv; /* Write to the local MII regs */ return(gfar_local_mdio_write(regs, mii_id, regnum, value)); } /* Read the bus for PHY at addr mii_id, register regnum, and * return the value. Clears miimcom first. All PHY * configuration has to be done through the TSEC1 MIIM regs */ int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum) { struct gfar_mii __iomem *regs = (void __iomem *)bus->priv; /* Read the local MII regs */ return(gfar_local_mdio_read(regs, mii_id, regnum)); } /* Reset the MIIM registers, and wait for the bus to free */ int gfar_mdio_reset(struct mii_bus *bus) { struct gfar_mii __iomem *regs = (void __iomem *)bus->priv; unsigned int timeout = PHY_INIT_TIMEOUT; spin_lock_bh(&bus->mdio_lock); /* Reset the management interface */ gfar_write(®s->miimcfg, MIIMCFG_RESET); /* Setup the MII Mgmt clock speed */ gfar_write(®s->miimcfg, MIIMCFG_INIT_VALUE); /* Wait until the bus is free */ while ((gfar_read(®s->miimind) & MIIMIND_BUSY) && timeout--) cpu_relax(); spin_unlock_bh(&bus->mdio_lock); if(timeout <= 0) { printk(KERN_ERR "%s: The MII Bus is stuck!\n", bus->name); return -EBUSY; } return 0; } int gfar_mdio_probe(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct gianfar_mdio_data *pdata; struct gfar_mii __iomem *regs; struct mii_bus *new_bus; struct resource *r; int err = 0; if (NULL == dev) return -EINVAL; new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL); if (NULL == new_bus) return -ENOMEM; new_bus->name = "Gianfar MII Bus", new_bus->read = &gfar_mdio_read, new_bus->write = &gfar_mdio_write, new_bus->reset = &gfar_mdio_reset, new_bus->id = pdev->id; pdata = (struct gianfar_mdio_data *)pdev->dev.platform_data; if (NULL == pdata) { printk(KERN_ERR "gfar mdio %d: Missing platform data!\n", pdev->id); return -ENODEV; } r = platform_get_resource(pdev, IORESOURCE_MEM, 0); /* Set the PHY base address */ regs = ioremap(r->start, sizeof (struct gfar_mii)); if (NULL == regs) { err = -ENOMEM; goto reg_map_fail; } new_bus->priv = (void __force *)regs; new_bus->irq = pdata->irq; new_bus->dev = dev; dev_set_drvdata(dev, new_bus); err = mdiobus_register(new_bus); if (0 != err) { printk (KERN_ERR "%s: Cannot register as MDIO bus\n", new_bus->name); goto bus_register_fail; } return 0; bus_register_fail: iounmap(regs); reg_map_fail: kfree(new_bus); return err; } int gfar_mdio_remove(struct device *dev) { struct mii_bus *bus = dev_get_drvdata(dev); mdiobus_unregister(bus); dev_set_drvdata(dev, NULL); iounmap((void __iomem *)bus->priv); bus->priv = NULL; kfree(bus); return 0; } static struct device_driver gianfar_mdio_driver = { .name = "fsl-gianfar_mdio", .bus = &platform_bus_type, .probe = gfar_mdio_probe, .remove = gfar_mdio_remove, }; int __init gfar_mdio_init(void) { return driver_register(&gianfar_mdio_driver); } void gfar_mdio_exit(void) { driver_unregister(&gianfar_mdio_driver); }