/* * Fast Ethernet Controller (FEC) driver for Motorola MPC8xx. * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) * * Right now, I am very wasteful with the buffers. I allocate memory * pages and then divide them into 2K frame buffers. This way I know I * have buffers large enough to hold one frame within one buffer descriptor. * Once I get this working, I will use 64 or 128 byte CPM buffers, which * will be much more memory efficient and will easily handle lots of * small packets. * * Much better multiple PHY support by Magnus Damm. * Copyright (c) 2000 Ericsson Radio Systems AB. * * Support for FEC controller of ColdFire processors. * Copyright (c) 2001-2005 Greg Ungerer (gerg@snapgear.com) * * Bug fixes and cleanup by Philippe De Muyter (phdm@macqel.be) * Copyright (c) 2004-2006 Macq Electronique SA. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifndef CONFIG_ARCH_MXC #include #include #endif #include "fec.h" #ifdef CONFIG_ARCH_MXC #include #define FEC_ALIGNMENT 0xf #else #define FEC_ALIGNMENT 0x3 #endif /* * Define the fixed address of the FEC hardware. */ #if defined(CONFIG_M5272) #define HAVE_mii_link_interrupt static unsigned char fec_mac_default[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, }; /* * Some hardware gets it MAC address out of local flash memory. * if this is non-zero then assume it is the address to get MAC from. */ #if defined(CONFIG_NETtel) #define FEC_FLASHMAC 0xf0006006 #elif defined(CONFIG_GILBARCONAP) || defined(CONFIG_SCALES) #define FEC_FLASHMAC 0xf0006000 #elif defined(CONFIG_CANCam) #define FEC_FLASHMAC 0xf0020000 #elif defined (CONFIG_M5272C3) #define FEC_FLASHMAC (0xffe04000 + 4) #elif defined(CONFIG_MOD5272) #define FEC_FLASHMAC 0xffc0406b #else #define FEC_FLASHMAC 0 #endif #endif /* CONFIG_M5272 */ /* Forward declarations of some structures to support different PHYs */ typedef struct { uint mii_data; void (*funct)(uint mii_reg, struct net_device *dev); } phy_cmd_t; typedef struct { uint id; char *name; const phy_cmd_t *config; const phy_cmd_t *startup; const phy_cmd_t *ack_int; const phy_cmd_t *shutdown; } phy_info_t; /* The number of Tx and Rx buffers. These are allocated from the page * pool. The code may assume these are power of two, so it it best * to keep them that size. * We don't need to allocate pages for the transmitter. We just use * the skbuffer directly. */ #define FEC_ENET_RX_PAGES 8 #define FEC_ENET_RX_FRSIZE 2048 #define FEC_ENET_RX_FRPPG (PAGE_SIZE / FEC_ENET_RX_FRSIZE) #define RX_RING_SIZE (FEC_ENET_RX_FRPPG * FEC_ENET_RX_PAGES) #define FEC_ENET_TX_FRSIZE 2048 #define FEC_ENET_TX_FRPPG (PAGE_SIZE / FEC_ENET_TX_FRSIZE) #define TX_RING_SIZE 16 /* Must be power of two */ #define TX_RING_MOD_MASK 15 /* for this to work */ #if (((RX_RING_SIZE + TX_RING_SIZE) * 8) > PAGE_SIZE) #error "FEC: descriptor ring size constants too large" #endif /* Interrupt events/masks. */ #define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */ #define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */ #define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */ #define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */ #define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */ #define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */ #define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */ #define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */ #define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */ #define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */ /* The FEC stores dest/src/type, data, and checksum for receive packets. */ #define PKT_MAXBUF_SIZE 1518 #define PKT_MINBUF_SIZE 64 #define PKT_MAXBLR_SIZE 1520 /* * The 5270/5271/5280/5282/532x RX control register also contains maximum frame * size bits. Other FEC hardware does not, so we need to take that into * account when setting it. */ #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARCH_MXC) #define OPT_FRAME_SIZE (PKT_MAXBUF_SIZE << 16) #else #define OPT_FRAME_SIZE 0 #endif /* The FEC buffer descriptors track the ring buffers. The rx_bd_base and * tx_bd_base always point to the base of the buffer descriptors. The * cur_rx and cur_tx point to the currently available buffer. * The dirty_tx tracks the current buffer that is being sent by the * controller. The cur_tx and dirty_tx are equal under both completely * empty and completely full conditions. The empty/ready indicator in * the buffer descriptor determines the actual condition. */ struct fec_enet_private { /* Hardware registers of the FEC device */ void __iomem *hwp; struct net_device *netdev; struct clk *clk; /* The saved address of a sent-in-place packet/buffer, for skfree(). */ unsigned char *tx_bounce[TX_RING_SIZE]; struct sk_buff* tx_skbuff[TX_RING_SIZE]; struct sk_buff* rx_skbuff[RX_RING_SIZE]; ushort skb_cur; ushort skb_dirty; /* CPM dual port RAM relative addresses */ dma_addr_t bd_dma; /* Address of Rx and Tx buffers */ struct bufdesc *rx_bd_base; struct bufdesc *tx_bd_base; /* The next free ring entry */ struct bufdesc *cur_rx, *cur_tx; /* The ring entries to be free()ed */ struct bufdesc *dirty_tx; uint tx_full; /* hold while accessing the HW like ringbuffer for tx/rx but not MAC */ spinlock_t hw_lock; /* hold while accessing the mii_list_t() elements */ spinlock_t mii_lock; uint phy_id; uint phy_id_done; uint phy_status; uint phy_speed; phy_info_t const *phy; struct work_struct phy_task; uint sequence_done; uint mii_phy_task_queued; uint phy_addr; int index; int opened; int link; int old_link; int full_duplex; }; static void fec_enet_mii(struct net_device *dev); static irqreturn_t fec_enet_interrupt(int irq, void * dev_id); static void fec_enet_tx(struct net_device *dev); static void fec_enet_rx(struct net_device *dev); static int fec_enet_close(struct net_device *dev); static void fec_restart(struct net_device *dev, int duplex); static void fec_stop(struct net_device *dev); /* MII processing. We keep this as simple as possible. Requests are * placed on the list (if there is room). When the request is finished * by the MII, an optional function may be called. */ typedef struct mii_list { uint mii_regval; void (*mii_func)(uint val, struct net_device *dev); struct mii_list *mii_next; } mii_list_t; #define NMII 20 static mii_list_t mii_cmds[NMII]; static mii_list_t *mii_free; static mii_list_t *mii_head; static mii_list_t *mii_tail; static int mii_queue(struct net_device *dev, int request, void (*func)(uint, struct net_device *)); /* Make MII read/write commands for the FEC */ #define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18)) #define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | \ (VAL & 0xffff)) #define mk_mii_end 0 /* Transmitter timeout */ #define TX_TIMEOUT (2 * HZ) /* Register definitions for the PHY */ #define MII_REG_CR 0 /* Control Register */ #define MII_REG_SR 1 /* Status Register */ #define MII_REG_PHYIR1 2 /* PHY Identification Register 1 */ #define MII_REG_PHYIR2 3 /* PHY Identification Register 2 */ #define MII_REG_ANAR 4 /* A-N Advertisement Register */ #define MII_REG_ANLPAR 5 /* A-N Link Partner Ability Register */ #define MII_REG_ANER 6 /* A-N Expansion Register */ #define MII_REG_ANNPTR 7 /* A-N Next Page Transmit Register */ #define MII_REG_ANLPRNPR 8 /* A-N Link Partner Received Next Page Reg. */ /* values for phy_status */ #define PHY_CONF_ANE 0x0001 /* 1 auto-negotiation enabled */ #define PHY_CONF_LOOP 0x0002 /* 1 loopback mode enabled */ #define PHY_CONF_SPMASK 0x00f0 /* mask for speed */ #define PHY_CONF_10HDX 0x0010 /* 10 Mbit half duplex supported */ #define PHY_CONF_10FDX 0x0020 /* 10 Mbit full duplex supported */ #define PHY_CONF_100HDX 0x0040 /* 100 Mbit half duplex supported */ #define PHY_CONF_100FDX 0x0080 /* 100 Mbit full duplex supported */ #define PHY_STAT_LINK 0x0100 /* 1 up - 0 down */ #define PHY_STAT_FAULT 0x0200 /* 1 remote fault */ #define PHY_STAT_ANC 0x0400 /* 1 auto-negotiation complete */ #define PHY_STAT_SPMASK 0xf000 /* mask for speed */ #define PHY_STAT_10HDX 0x1000 /* 10 Mbit half duplex selected */ #define PHY_STAT_10FDX 0x2000 /* 10 Mbit full duplex selected */ #define PHY_STAT_100HDX 0x4000 /* 100 Mbit half duplex selected */ #define PHY_STAT_100FDX 0x8000 /* 100 Mbit full duplex selected */ static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); struct bufdesc *bdp; unsigned short status; unsigned long flags; if (!fep->link) { /* Link is down or autonegotiation is in progress. */ return 1; } spin_lock_irqsave(&fep->hw_lock, flags); /* Fill in a Tx ring entry */ bdp = fep->cur_tx; status = bdp->cbd_sc; if (status & BD_ENET_TX_READY) { /* Ooops. All transmit buffers are full. Bail out. * This should not happen, since dev->tbusy should be set. */ printk("%s: tx queue full!.\n", dev->name); spin_unlock_irqrestore(&fep->hw_lock, flags); return 1; } /* Clear all of the status flags */ status &= ~BD_ENET_TX_STATS; /* Set buffer length and buffer pointer */ bdp->cbd_bufaddr = __pa(skb->data); bdp->cbd_datlen = skb->len; /* * On some FEC implementations data must be aligned on * 4-byte boundaries. Use bounce buffers to copy data * and get it aligned. Ugh. */ if (bdp->cbd_bufaddr & FEC_ALIGNMENT) { unsigned int index; index = bdp - fep->tx_bd_base; memcpy(fep->tx_bounce[index], (void *)skb->data, skb->len); bdp->cbd_bufaddr = __pa(fep->tx_bounce[index]); } /* Save skb pointer */ fep->tx_skbuff[fep->skb_cur] = skb; dev->stats.tx_bytes += skb->len; fep->skb_cur = (fep->skb_cur+1) & TX_RING_MOD_MASK; /* Push the data cache so the CPM does not get stale memory * data. */ bdp->cbd_bufaddr = dma_map_single(&dev->dev, skb->data, FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE); /* Send it on its way. Tell FEC it's ready, interrupt when done, * it's the last BD of the frame, and to put the CRC on the end. */ status |= (BD_ENET_TX_READY | BD_ENET_TX_INTR | BD_ENET_TX_LAST | BD_ENET_TX_TC); bdp->cbd_sc = status; dev->trans_start = jiffies; /* Trigger transmission start */ writel(0, fep->hwp + FEC_X_DES_ACTIVE); /* If this was the last BD in the ring, start at the beginning again. */ if (status & BD_ENET_TX_WRAP) bdp = fep->tx_bd_base; else bdp++; if (bdp == fep->dirty_tx) { fep->tx_full = 1; netif_stop_queue(dev); } fep->cur_tx = bdp; spin_unlock_irqrestore(&fep->hw_lock, flags); return 0; } static void fec_timeout(struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); dev->stats.tx_errors++; fec_restart(dev, fep->full_duplex); netif_wake_queue(dev); } static irqreturn_t fec_enet_interrupt(int irq, void * dev_id) { struct net_device *dev = dev_id; struct fec_enet_private *fep = netdev_priv(dev); uint int_events; irqreturn_t ret = IRQ_NONE; do { int_events = readl(fep->hwp + FEC_IEVENT); writel(int_events, fep->hwp + FEC_IEVENT); if (int_events & FEC_ENET_RXF) { ret = IRQ_HANDLED; fec_enet_rx(dev); } /* Transmit OK, or non-fatal error. Update the buffer * descriptors. FEC handles all errors, we just discover * them as part of the transmit process. */ if (int_events & FEC_ENET_TXF) { ret = IRQ_HANDLED; fec_enet_tx(dev); } if (int_events & FEC_ENET_MII) { ret = IRQ_HANDLED; fec_enet_mii(dev); } } while (int_events); return ret; } static void fec_enet_tx(struct net_device *dev) { struct fec_enet_private *fep; struct bufdesc *bdp; unsigned short status; struct sk_buff *skb; fep = netdev_priv(dev); spin_lock_irq(&fep->hw_lock); bdp = fep->dirty_tx; while (((status = bdp->cbd_sc) & BD_ENET_TX_READY) == 0) { if (bdp == fep->cur_tx && fep->tx_full == 0) break; dma_unmap_single(&dev->dev, bdp->cbd_bufaddr, FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE); bdp->cbd_bufaddr = 0; skb = fep->tx_skbuff[fep->skb_dirty]; /* Check for errors. */ if (status & (BD_ENET_TX_HB | BD_ENET_TX_LC | BD_ENET_TX_RL | BD_ENET_TX_UN | BD_ENET_TX_CSL)) { dev->stats.tx_errors++; if (status & BD_ENET_TX_HB) /* No heartbeat */ dev->stats.tx_heartbeat_errors++; if (status & BD_ENET_TX_LC) /* Late collision */ dev->stats.tx_window_errors++; if (status & BD_ENET_TX_RL) /* Retrans limit */ dev->stats.tx_aborted_errors++; if (status & BD_ENET_TX_UN) /* Underrun */ dev->stats.tx_fifo_errors++; if (status & BD_ENET_TX_CSL) /* Carrier lost */ dev->stats.tx_carrier_errors++; } else { dev->stats.tx_packets++; } if (status & BD_ENET_TX_READY) printk("HEY! Enet xmit interrupt and TX_READY.\n"); /* Deferred means some collisions occurred during transmit, * but we eventually sent the packet OK. */ if (status & BD_ENET_TX_DEF) dev->stats.collisions++; /* Free the sk buffer associated with this last transmit */ dev_kfree_skb_any(skb); fep->tx_skbuff[fep->skb_dirty] = NULL; fep->skb_dirty = (fep->skb_dirty + 1) & TX_RING_MOD_MASK; /* Update pointer to next buffer descriptor to be transmitted */ if (status & BD_ENET_TX_WRAP) bdp = fep->tx_bd_base; else bdp++; /* Since we have freed up a buffer, the ring is no longer full */ if (fep->tx_full) { fep->tx_full = 0; if (netif_queue_stopped(dev)) netif_wake_queue(dev); } } fep->dirty_tx = bdp; spin_unlock_irq(&fep->hw_lock); } /* During a receive, the cur_rx points to the current incoming buffer. * When we update through the ring, if the next incoming buffer has * not been given to the system, we just set the empty indicator, * effectively tossing the packet. */ static void fec_enet_rx(struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); struct bufdesc *bdp; unsigned short status; struct sk_buff *skb; ushort pkt_len; __u8 *data; #ifdef CONFIG_M532x flush_cache_all(); #endif spin_lock_irq(&fep->hw_lock); /* First, grab all of the stats for the incoming packet. * These get messed up if we get called due to a busy condition. */ bdp = fep->cur_rx; while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) { /* Since we have allocated space to hold a complete frame, * the last indicator should be set. */ if ((status & BD_ENET_RX_LAST) == 0) printk("FEC ENET: rcv is not +last\n"); if (!fep->opened) goto rx_processing_done; /* Check for errors. */ if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO | BD_ENET_RX_CR | BD_ENET_RX_OV)) { dev->stats.rx_errors++; if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH)) { /* Frame too long or too short. */ dev->stats.rx_length_errors++; } if (status & BD_ENET_RX_NO) /* Frame alignment */ dev->stats.rx_frame_errors++; if (status & BD_ENET_RX_CR) /* CRC Error */ dev->stats.rx_crc_errors++; if (status & BD_ENET_RX_OV) /* FIFO overrun */ dev->stats.rx_fifo_errors++; } /* Report late collisions as a frame error. * On this error, the BD is closed, but we don't know what we * have in the buffer. So, just drop this frame on the floor. */ if (status & BD_ENET_RX_CL) { dev->stats.rx_errors++; dev->stats.rx_frame_errors++; goto rx_processing_done; } /* Process the incoming frame. */ dev->stats.rx_packets++; pkt_len = bdp->cbd_datlen; dev->stats.rx_bytes += pkt_len; data = (__u8*)__va(bdp->cbd_bufaddr); dma_unmap_single(NULL, bdp->cbd_bufaddr, bdp->cbd_datlen, DMA_FROM_DEVICE); /* This does 16 byte alignment, exactly what we need. * The packet length includes FCS, but we don't want to * include that when passing upstream as it messes up * bridging applications. */ skb = dev_alloc_skb(pkt_len - 4 + NET_IP_ALIGN); if (unlikely(!skb)) { printk("%s: Memory squeeze, dropping packet.\n", dev->name); dev->stats.rx_dropped++; } else { skb_reserve(skb, NET_IP_ALIGN); skb_put(skb, pkt_len - 4); /* Make room */ skb_copy_to_linear_data(skb, data, pkt_len - 4); skb->protocol = eth_type_trans(skb, dev); netif_rx(skb); } bdp->cbd_bufaddr = dma_map_single(NULL, data, bdp->cbd_datlen, DMA_FROM_DEVICE); rx_processing_done: /* Clear the status flags for this buffer */ status &= ~BD_ENET_RX_STATS; /* Mark the buffer empty */ status |= BD_ENET_RX_EMPTY; bdp->cbd_sc = status; /* Update BD pointer to next entry */ if (status & BD_ENET_RX_WRAP) bdp = fep->rx_bd_base; else bdp++; /* Doing this here will keep the FEC running while we process * incoming frames. On a heavily loaded network, we should be * able to keep up at the expense of system resources. */ writel(0, fep->hwp + FEC_R_DES_ACTIVE); } fep->cur_rx = bdp; spin_unlock_irq(&fep->hw_lock); } /* called from interrupt context */ static void fec_enet_mii(struct net_device *dev) { struct fec_enet_private *fep; mii_list_t *mip; fep = netdev_priv(dev); spin_lock_irq(&fep->mii_lock); if ((mip = mii_head) == NULL) { printk("MII and no head!\n"); goto unlock; } if (mip->mii_func != NULL) (*(mip->mii_func))(readl(fep->hwp + FEC_MII_DATA), dev); mii_head = mip->mii_next; mip->mii_next = mii_free; mii_free = mip; if ((mip = mii_head) != NULL) writel(mip->mii_regval, fep->hwp + FEC_MII_DATA); unlock: spin_unlock_irq(&fep->mii_lock); } static int mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_device *)) { struct fec_enet_private *fep; unsigned long flags; mii_list_t *mip; int retval; /* Add PHY address to register command */ fep = netdev_priv(dev); spin_lock_irqsave(&fep->mii_lock, flags); regval |= fep->phy_addr << 23; retval = 0; if ((mip = mii_free) != NULL) { mii_free = mip->mii_next; mip->mii_regval = regval; mip->mii_func = func; mip->mii_next = NULL; if (mii_head) { mii_tail->mii_next = mip; mii_tail = mip; } else { mii_head = mii_tail = mip; writel(regval, fep->hwp + FEC_MII_DATA); } } else { retval = 1; } spin_unlock_irqrestore(&fep->mii_lock, flags); return retval; } static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c) { if(!c) return; for (; c->mii_data != mk_mii_end; c++) mii_queue(dev, c->mii_data, c->funct); } static void mii_parse_sr(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); volatile uint *s = &(fep->phy_status); uint status; status = *s & ~(PHY_STAT_LINK | PHY_STAT_FAULT | PHY_STAT_ANC); if (mii_reg & 0x0004) status |= PHY_STAT_LINK; if (mii_reg & 0x0010) status |= PHY_STAT_FAULT; if (mii_reg & 0x0020) status |= PHY_STAT_ANC; *s = status; } static void mii_parse_cr(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); volatile uint *s = &(fep->phy_status); uint status; status = *s & ~(PHY_CONF_ANE | PHY_CONF_LOOP); if (mii_reg & 0x1000) status |= PHY_CONF_ANE; if (mii_reg & 0x4000) status |= PHY_CONF_LOOP; *s = status; } static void mii_parse_anar(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); volatile uint *s = &(fep->phy_status); uint status; status = *s & ~(PHY_CONF_SPMASK); if (mii_reg & 0x0020) status |= PHY_CONF_10HDX; if (mii_reg & 0x0040) status |= PHY_CONF_10FDX; if (mii_reg & 0x0080) status |= PHY_CONF_100HDX; if (mii_reg & 0x00100) status |= PHY_CONF_100FDX; *s = status; } /* ------------------------------------------------------------------------- */ /* The Level one LXT970 is used by many boards */ #define MII_LXT970_MIRROR 16 /* Mirror register */ #define MII_LXT970_IER 17 /* Interrupt Enable Register */ #define MII_LXT970_ISR 18 /* Interrupt Status Register */ #define MII_LXT970_CONFIG 19 /* Configuration Register */ #define MII_LXT970_CSR 20 /* Chip Status Register */ static void mii_parse_lxt970_csr(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); volatile uint *s = &(fep->phy_status); uint status; status = *s & ~(PHY_STAT_SPMASK); if (mii_reg & 0x0800) { if (mii_reg & 0x1000) status |= PHY_STAT_100FDX; else status |= PHY_STAT_100HDX; } else { if (mii_reg & 0x1000) status |= PHY_STAT_10FDX; else status |= PHY_STAT_10HDX; } *s = status; } static phy_cmd_t const phy_cmd_lxt970_config[] = { { mk_mii_read(MII_REG_CR), mii_parse_cr }, { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, { mk_mii_end, } }; static phy_cmd_t const phy_cmd_lxt970_startup[] = { /* enable interrupts */ { mk_mii_write(MII_LXT970_IER, 0x0002), NULL }, { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ { mk_mii_end, } }; static phy_cmd_t const phy_cmd_lxt970_ack_int[] = { /* read SR and ISR to acknowledge */ { mk_mii_read(MII_REG_SR), mii_parse_sr }, { mk_mii_read(MII_LXT970_ISR), NULL }, /* find out the current status */ { mk_mii_read(MII_LXT970_CSR), mii_parse_lxt970_csr }, { mk_mii_end, } }; static phy_cmd_t const phy_cmd_lxt970_shutdown[] = { /* disable interrupts */ { mk_mii_write(MII_LXT970_IER, 0x0000), NULL }, { mk_mii_end, } }; static phy_info_t const phy_info_lxt970 = { .id = 0x07810000, .name = "LXT970", .config = phy_cmd_lxt970_config, .startup = phy_cmd_lxt970_startup, .ack_int = phy_cmd_lxt970_ack_int, .shutdown = phy_cmd_lxt970_shutdown }; /* ------------------------------------------------------------------------- */ /* The Level one LXT971 is used on some of my custom boards */ /* register definitions for the 971 */ #define MII_LXT971_PCR 16 /* Port Control Register */ #define MII_LXT971_SR2 17 /* Status Register 2 */ #define MII_LXT971_IER 18 /* Interrupt Enable Register */ #define MII_LXT971_ISR 19 /* Interrupt Status Register */ #define MII_LXT971_LCR 20 /* LED Control Register */ #define MII_LXT971_TCR 30 /* Transmit Control Register */ /* * I had some nice ideas of running the MDIO faster... * The 971 should support 8MHz and I tried it, but things acted really * weird, so 2.5 MHz ought to be enough for anyone... */ static void mii_parse_lxt971_sr2(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); volatile uint *s = &(fep->phy_status); uint status; status = *s & ~(PHY_STAT_SPMASK | PHY_STAT_LINK | PHY_STAT_ANC); if (mii_reg & 0x0400) { fep->link = 1; status |= PHY_STAT_LINK; } else { fep->link = 0; } if (mii_reg & 0x0080) status |= PHY_STAT_ANC; if (mii_reg & 0x4000) { if (mii_reg & 0x0200) status |= PHY_STAT_100FDX; else status |= PHY_STAT_100HDX; } else { if (mii_reg & 0x0200) status |= PHY_STAT_10FDX; else status |= PHY_STAT_10HDX; } if (mii_reg & 0x0008) status |= PHY_STAT_FAULT; *s = status; } static phy_cmd_t const phy_cmd_lxt971_config[] = { /* limit to 10MBit because my prototype board * doesn't work with 100. */ { mk_mii_read(MII_REG_CR), mii_parse_cr }, { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, { mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 }, { mk_mii_end, } }; static phy_cmd_t const phy_cmd_lxt971_startup[] = { /* enable interrupts */ { mk_mii_write(MII_LXT971_IER, 0x00f2), NULL }, { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ { mk_mii_write(MII_LXT971_LCR, 0xd422), NULL }, /* LED config */ /* Somehow does the 971 tell me that the link is down * the first read after power-up. * read here to get a valid value in ack_int */ { mk_mii_read(MII_REG_SR), mii_parse_sr }, { mk_mii_end, } }; static phy_cmd_t const phy_cmd_lxt971_ack_int[] = { /* acknowledge the int before reading status ! */ { mk_mii_read(MII_LXT971_ISR), NULL }, /* find out the current status */ { mk_mii_read(MII_REG_SR), mii_parse_sr }, { mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 }, { mk_mii_end, } }; static phy_cmd_t const phy_cmd_lxt971_shutdown[] = { /* disable interrupts */ { mk_mii_write(MII_LXT971_IER, 0x0000), NULL }, { mk_mii_end, } }; static phy_info_t const phy_info_lxt971 = { .id = 0x0001378e, .name = "LXT971", .config = phy_cmd_lxt971_config, .startup = phy_cmd_lxt971_startup, .ack_int = phy_cmd_lxt971_ack_int, .shutdown = phy_cmd_lxt971_shutdown }; /* ------------------------------------------------------------------------- */ /* The Quality Semiconductor QS6612 is used on the RPX CLLF */ /* register definitions */ #define MII_QS6612_MCR 17 /* Mode Control Register */ #define MII_QS6612_FTR 27 /* Factory Test Register */ #define MII_QS6612_MCO 28 /* Misc. Control Register */ #define MII_QS6612_ISR 29 /* Interrupt Source Register */ #define MII_QS6612_IMR 30 /* Interrupt Mask Register */ #define MII_QS6612_PCR 31 /* 100BaseTx PHY Control Reg. */ static void mii_parse_qs6612_pcr(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); volatile uint *s = &(fep->phy_status); uint status; status = *s & ~(PHY_STAT_SPMASK); switch((mii_reg >> 2) & 7) { case 1: status |= PHY_STAT_10HDX; break; case 2: status |= PHY_STAT_100HDX; break; case 5: status |= PHY_STAT_10FDX; break; case 6: status |= PHY_STAT_100FDX; break; } *s = status; } static phy_cmd_t const phy_cmd_qs6612_config[] = { /* The PHY powers up isolated on the RPX, * so send a command to allow operation. */ { mk_mii_write(MII_QS6612_PCR, 0x0dc0), NULL }, /* parse cr and anar to get some info */ { mk_mii_read(MII_REG_CR), mii_parse_cr }, { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, { mk_mii_end, } }; static phy_cmd_t const phy_cmd_qs6612_startup[] = { /* enable interrupts */ { mk_mii_write(MII_QS6612_IMR, 0x003a), NULL }, { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ { mk_mii_end, } }; static phy_cmd_t const phy_cmd_qs6612_ack_int[] = { /* we need to read ISR, SR and ANER to acknowledge */ { mk_mii_read(MII_QS6612_ISR), NULL }, { mk_mii_read(MII_REG_SR), mii_parse_sr }, { mk_mii_read(MII_REG_ANER), NULL }, /* read pcr to get info */ { mk_mii_read(MII_QS6612_PCR), mii_parse_qs6612_pcr }, { mk_mii_end, } }; static phy_cmd_t const phy_cmd_qs6612_shutdown[] = { /* disable interrupts */ { mk_mii_write(MII_QS6612_IMR, 0x0000), NULL }, { mk_mii_end, } }; static phy_info_t const phy_info_qs6612 = { .id = 0x00181440, .name = "QS6612", .config = phy_cmd_qs6612_config, .startup = phy_cmd_qs6612_startup, .ack_int = phy_cmd_qs6612_ack_int, .shutdown = phy_cmd_qs6612_shutdown }; /* ------------------------------------------------------------------------- */ /* AMD AM79C874 phy */ /* register definitions for the 874 */ #define MII_AM79C874_MFR 16 /* Miscellaneous Feature Register */ #define MII_AM79C874_ICSR 17 /* Interrupt/Status Register */ #define MII_AM79C874_DR 18 /* Diagnostic Register */ #define MII_AM79C874_PMLR 19 /* Power and Loopback Register */ #define MII_AM79C874_MCR 21 /* ModeControl Register */ #define MII_AM79C874_DC 23 /* Disconnect Counter */ #define MII_AM79C874_REC 24 /* Recieve Error Counter */ static void mii_parse_am79c874_dr(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); volatile uint *s = &(fep->phy_status); uint status; status = *s & ~(PHY_STAT_SPMASK | PHY_STAT_ANC); if (mii_reg & 0x0080) status |= PHY_STAT_ANC; if (mii_reg & 0x0400) status |= ((mii_reg & 0x0800) ? PHY_STAT_100FDX : PHY_STAT_100HDX); else status |= ((mii_reg & 0x0800) ? PHY_STAT_10FDX : PHY_STAT_10HDX); *s = status; } static phy_cmd_t const phy_cmd_am79c874_config[] = { { mk_mii_read(MII_REG_CR), mii_parse_cr }, { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, { mk_mii_read(MII_AM79C874_DR), mii_parse_am79c874_dr }, { mk_mii_end, } }; static phy_cmd_t const phy_cmd_am79c874_startup[] = { /* enable interrupts */ { mk_mii_write(MII_AM79C874_ICSR, 0xff00), NULL }, { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ { mk_mii_read(MII_REG_SR), mii_parse_sr }, { mk_mii_end, } }; static phy_cmd_t const phy_cmd_am79c874_ack_int[] = { /* find out the current status */ { mk_mii_read(MII_REG_SR), mii_parse_sr }, { mk_mii_read(MII_AM79C874_DR), mii_parse_am79c874_dr }, /* we only need to read ISR to acknowledge */ { mk_mii_read(MII_AM79C874_ICSR), NULL }, { mk_mii_end, } }; static phy_cmd_t const phy_cmd_am79c874_shutdown[] = { /* disable interrupts */ { mk_mii_write(MII_AM79C874_ICSR, 0x0000), NULL }, { mk_mii_end, } }; static phy_info_t const phy_info_am79c874 = { .id = 0x00022561, .name = "AM79C874", .config = phy_cmd_am79c874_config, .startup = phy_cmd_am79c874_startup, .ack_int = phy_cmd_am79c874_ack_int, .shutdown = phy_cmd_am79c874_shutdown }; /* ------------------------------------------------------------------------- */ /* Kendin KS8721BL phy */ /* register definitions for the 8721 */ #define MII_KS8721BL_RXERCR 21 #define MII_KS8721BL_ICSR 27 #define MII_KS8721BL_PHYCR 31 static phy_cmd_t const phy_cmd_ks8721bl_config[] = { { mk_mii_read(MII_REG_CR), mii_parse_cr }, { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, { mk_mii_end, } }; static phy_cmd_t const phy_cmd_ks8721bl_startup[] = { /* enable interrupts */ { mk_mii_write(MII_KS8721BL_ICSR, 0xff00), NULL }, { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ { mk_mii_read(MII_REG_SR), mii_parse_sr }, { mk_mii_end, } }; static phy_cmd_t const phy_cmd_ks8721bl_ack_int[] = { /* find out the current status */ { mk_mii_read(MII_REG_SR), mii_parse_sr }, /* we only need to read ISR to acknowledge */ { mk_mii_read(MII_KS8721BL_ICSR), NULL }, { mk_mii_end, } }; static phy_cmd_t const phy_cmd_ks8721bl_shutdown[] = { /* disable interrupts */ { mk_mii_write(MII_KS8721BL_ICSR, 0x0000), NULL }, { mk_mii_end, } }; static phy_info_t const phy_info_ks8721bl = { .id = 0x00022161, .name = "KS8721BL", .config = phy_cmd_ks8721bl_config, .startup = phy_cmd_ks8721bl_startup, .ack_int = phy_cmd_ks8721bl_ack_int, .shutdown = phy_cmd_ks8721bl_shutdown }; /* ------------------------------------------------------------------------- */ /* register definitions for the DP83848 */ #define MII_DP8384X_PHYSTST 16 /* PHY Status Register */ static void mii_parse_dp8384x_sr2(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); volatile uint *s = &(fep->phy_status); *s &= ~(PHY_STAT_SPMASK | PHY_STAT_LINK | PHY_STAT_ANC); /* Link up */ if (mii_reg & 0x0001) { fep->link = 1; *s |= PHY_STAT_LINK; } else fep->link = 0; /* Status of link */ if (mii_reg & 0x0010) /* Autonegotioation complete */ *s |= PHY_STAT_ANC; if (mii_reg & 0x0002) { /* 10MBps? */ if (mii_reg & 0x0004) /* Full Duplex? */ *s |= PHY_STAT_10FDX; else *s |= PHY_STAT_10HDX; } else { /* 100 Mbps? */ if (mii_reg & 0x0004) /* Full Duplex? */ *s |= PHY_STAT_100FDX; else *s |= PHY_STAT_100HDX; } if (mii_reg & 0x0008) *s |= PHY_STAT_FAULT; } static phy_info_t phy_info_dp83848= { 0x020005c9, "DP83848", (const phy_cmd_t []) { /* config */ { mk_mii_read(MII_REG_CR), mii_parse_cr }, { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, { mk_mii_read(MII_DP8384X_PHYSTST), mii_parse_dp8384x_sr2 }, { mk_mii_end, } }, (const phy_cmd_t []) { /* startup - enable interrupts */ { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ { mk_mii_read(MII_REG_SR), mii_parse_sr }, { mk_mii_end, } }, (const phy_cmd_t []) { /* ack_int - never happens, no interrupt */ { mk_mii_end, } }, (const phy_cmd_t []) { /* shutdown */ { mk_mii_end, } }, }; /* ------------------------------------------------------------------------- */ static phy_info_t const * const phy_info[] = { &phy_info_lxt970, &phy_info_lxt971, &phy_info_qs6612, &phy_info_am79c874, &phy_info_ks8721bl, &phy_info_dp83848, NULL }; /* ------------------------------------------------------------------------- */ #ifdef HAVE_mii_link_interrupt static irqreturn_t mii_link_interrupt(int irq, void * dev_id); /* * This is specific to the MII interrupt setup of the M5272EVB. */ static void __inline__ fec_request_mii_intr(struct net_device *dev) { if (request_irq(66, mii_link_interrupt, IRQF_DISABLED, "fec(MII)", dev) != 0) printk("FEC: Could not allocate fec(MII) IRQ(66)!\n"); } static void __inline__ fec_disable_phy_intr(void) { volatile unsigned long *icrp; icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); *icrp = 0x08000000; } static void __inline__ fec_phy_ack_intr(void) { volatile unsigned long *icrp; /* Acknowledge the interrupt */ icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); *icrp = 0x0d000000; } #ifdef CONFIG_M5272 static void __inline__ fec_get_mac(struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); unsigned char *iap, tmpaddr[ETH_ALEN]; if (FEC_FLASHMAC) { /* * Get MAC address from FLASH. * If it is all 1's or 0's, use the default. */ iap = (unsigned char *)FEC_FLASHMAC; if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) && (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0)) iap = fec_mac_default; if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) && (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff)) iap = fec_mac_default; } else { *((unsigned long *) &tmpaddr[0]) = readl(fep->hwp + FEC_ADDR_LOW); *((unsigned short *) &tmpaddr[4]) = (readl(fep->hwp + FEC_ADDR_HIGH) >> 16); iap = &tmpaddr[0]; } memcpy(dev->dev_addr, iap, ETH_ALEN); /* Adjust MAC if using default MAC address */ if (iap == fec_mac_default) dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index; } #endif /* ------------------------------------------------------------------------- */ static void mii_display_status(struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); volatile uint *s = &(fep->phy_status); if (!fep->link && !fep->old_link) { /* Link is still down - don't print anything */ return; } printk("%s: status: ", dev->name); if (!fep->link) { printk("link down"); } else { printk("link up"); switch(*s & PHY_STAT_SPMASK) { case PHY_STAT_100FDX: printk(", 100MBit Full Duplex"); break; case PHY_STAT_100HDX: printk(", 100MBit Half Duplex"); break; case PHY_STAT_10FDX: printk(", 10MBit Full Duplex"); break; case PHY_STAT_10HDX: printk(", 10MBit Half Duplex"); break; default: printk(", Unknown speed/duplex"); } if (*s & PHY_STAT_ANC) printk(", auto-negotiation complete"); } if (*s & PHY_STAT_FAULT) printk(", remote fault"); printk(".\n"); } static void mii_display_config(struct work_struct *work) { struct fec_enet_private *fep = container_of(work, struct fec_enet_private, phy_task); struct net_device *dev = fep->netdev; uint status = fep->phy_status; /* ** When we get here, phy_task is already removed from ** the workqueue. It is thus safe to allow to reuse it. */ fep->mii_phy_task_queued = 0; printk("%s: config: auto-negotiation ", dev->name); if (status & PHY_CONF_ANE) printk("on"); else printk("off"); if (status & PHY_CONF_100FDX) printk(", 100FDX"); if (status & PHY_CONF_100HDX) printk(", 100HDX"); if (status & PHY_CONF_10FDX) printk(", 10FDX"); if (status & PHY_CONF_10HDX) printk(", 10HDX"); if (!(status & PHY_CONF_SPMASK)) printk(", No speed/duplex selected?"); if (status & PHY_CONF_LOOP) printk(", loopback enabled"); printk(".\n"); fep->sequence_done = 1; } static void mii_relink(struct work_struct *work) { struct fec_enet_private *fep = container_of(work, struct fec_enet_private, phy_task); struct net_device *dev = fep->netdev; int duplex; /* ** When we get here, phy_task is already removed from ** the workqueue. It is thus safe to allow to reuse it. */ fep->mii_phy_task_queued = 0; fep->link = (fep->phy_status & PHY_STAT_LINK) ? 1 : 0; mii_display_status(dev); fep->old_link = fep->link; if (fep->link) { duplex = 0; if (fep->phy_status & (PHY_STAT_100FDX | PHY_STAT_10FDX)) duplex = 1; fec_restart(dev, duplex); } else fec_stop(dev); } /* mii_queue_relink is called in interrupt context from mii_link_interrupt */ static void mii_queue_relink(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); /* * We cannot queue phy_task twice in the workqueue. It * would cause an endless loop in the workqueue. * Fortunately, if the last mii_relink entry has not yet been * executed now, it will do the job for the current interrupt, * which is just what we want. */ if (fep->mii_phy_task_queued) return; fep->mii_phy_task_queued = 1; INIT_WORK(&fep->phy_task, mii_relink); schedule_work(&fep->phy_task); } /* mii_queue_config is called in interrupt context from fec_enet_mii */ static void mii_queue_config(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); if (fep->mii_phy_task_queued) return; fep->mii_phy_task_queued = 1; INIT_WORK(&fep->phy_task, mii_display_config); schedule_work(&fep->phy_task); } phy_cmd_t const phy_cmd_relink[] = { { mk_mii_read(MII_REG_CR), mii_queue_relink }, { mk_mii_end, } }; phy_cmd_t const phy_cmd_config[] = { { mk_mii_read(MII_REG_CR), mii_queue_config }, { mk_mii_end, } }; /* Read remainder of PHY ID. */ static void mii_discover_phy3(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep; int i; fep = netdev_priv(dev); fep->phy_id |= (mii_reg & 0xffff); printk("fec: PHY @ 0x%x, ID 0x%08x", fep->phy_addr, fep->phy_id); for(i = 0; phy_info[i]; i++) { if(phy_info[i]->id == (fep->phy_id >> 4)) break; } if (phy_info[i]) printk(" -- %s\n", phy_info[i]->name); else printk(" -- unknown PHY!\n"); fep->phy = phy_info[i]; fep->phy_id_done = 1; } /* Scan all of the MII PHY addresses looking for someone to respond * with a valid ID. This usually happens quickly. */ static void mii_discover_phy(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep; uint phytype; fep = netdev_priv(dev); if (fep->phy_addr < 32) { if ((phytype = (mii_reg & 0xffff)) != 0xffff && phytype != 0) { /* Got first part of ID, now get remainder */ fep->phy_id = phytype << 16; mii_queue(dev, mk_mii_read(MII_REG_PHYIR2), mii_discover_phy3); } else { fep->phy_addr++; mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy); } } else { printk("FEC: No PHY device found.\n"); /* Disable external MII interface */ writel(0, fep->hwp + FEC_MII_SPEED); fep->phy_speed = 0; #ifdef HAVE_mii_link_interrupt fec_disable_phy_intr(); #endif } } /* This interrupt occurs when the PHY detects a link change */ #ifdef HAVE_mii_link_interrupt static irqreturn_t mii_link_interrupt(int irq, void * dev_id) { struct net_device *dev = dev_id; struct fec_enet_private *fep = netdev_priv(dev); fec_phy_ack_intr(); mii_do_cmd(dev, fep->phy->ack_int); mii_do_cmd(dev, phy_cmd_relink); /* restart and display status */ return IRQ_HANDLED; } #endif static void fec_enet_free_buffers(struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); int i; struct sk_buff *skb; struct bufdesc *bdp; bdp = fep->rx_bd_base; for (i = 0; i < RX_RING_SIZE; i++) { skb = fep->rx_skbuff[i]; if (bdp->cbd_bufaddr) dma_unmap_single(&dev->dev, bdp->cbd_bufaddr, FEC_ENET_RX_FRSIZE, DMA_FROM_DEVICE); if (skb) dev_kfree_skb(skb); bdp++; } bdp = fep->tx_bd_base; for (i = 0; i < TX_RING_SIZE; i++) kfree(fep->tx_bounce[i]); } static int fec_enet_alloc_buffers(struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); int i; struct sk_buff *skb; struct bufdesc *bdp; bdp = fep->rx_bd_base; for (i = 0; i < RX_RING_SIZE; i++) { skb = dev_alloc_skb(FEC_ENET_RX_FRSIZE); if (!skb) { fec_enet_free_buffers(dev); return -ENOMEM; } fep->rx_skbuff[i] = skb; bdp->cbd_bufaddr = dma_map_single(&dev->dev, skb->data, FEC_ENET_RX_FRSIZE, DMA_FROM_DEVICE); bdp->cbd_sc = BD_ENET_RX_EMPTY; bdp++; } /* Set the last buffer to wrap. */ bdp--; bdp->cbd_sc |= BD_SC_WRAP; bdp = fep->tx_bd_base; for (i = 0; i < TX_RING_SIZE; i++) { fep->tx_bounce[i] = kmalloc(FEC_ENET_TX_FRSIZE, GFP_KERNEL); bdp->cbd_sc = 0; bdp->cbd_bufaddr = 0; bdp++; } /* Set the last buffer to wrap. */ bdp--; bdp->cbd_sc |= BD_SC_WRAP; return 0; } static int fec_enet_open(struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); int ret; /* I should reset the ring buffers here, but I don't yet know * a simple way to do that. */ ret = fec_enet_alloc_buffers(dev); if (ret) return ret; fep->sequence_done = 0; fep->link = 0; if (fep->phy) { mii_do_cmd(dev, fep->phy->ack_int); mii_do_cmd(dev, fep->phy->config); mii_do_cmd(dev, phy_cmd_config); /* display configuration */ /* Poll until the PHY tells us its configuration * (not link state). * Request is initiated by mii_do_cmd above, but answer * comes by interrupt. * This should take about 25 usec per register at 2.5 MHz, * and we read approximately 5 registers. */ while(!fep->sequence_done) schedule(); mii_do_cmd(dev, fep->phy->startup); /* Set the initial link state to true. A lot of hardware * based on this device does not implement a PHY interrupt, * so we are never notified of link change. */ fep->link = 1; } else { fep->link = 1; /* lets just try it and see */ /* no phy, go full duplex, it's most likely a hub chip */ fec_restart(dev, 1); } netif_start_queue(dev); fep->opened = 1; return 0; } static int fec_enet_close(struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); /* Don't know what to do yet. */ fep->opened = 0; netif_stop_queue(dev); fec_stop(dev); fec_enet_free_buffers(dev); return 0; } /* Set or clear the multicast filter for this adaptor. * Skeleton taken from sunlance driver. * The CPM Ethernet implementation allows Multicast as well as individual * MAC address filtering. Some of the drivers check to make sure it is * a group multicast address, and discard those that are not. I guess I * will do the same for now, but just remove the test if you want * individual filtering as well (do the upper net layers want or support * this kind of feature?). */ #define HASH_BITS 6 /* #bits in hash */ #define CRC32_POLY 0xEDB88320 static void set_multicast_list(struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); struct dev_mc_list *dmi; unsigned int i, j, bit, data, crc, tmp; unsigned char hash; if (dev->flags & IFF_PROMISC) { tmp = readl(fep->hwp + FEC_R_CNTRL); tmp |= 0x8; writel(tmp, fep->hwp + FEC_R_CNTRL); return; } tmp = readl(fep->hwp + FEC_R_CNTRL); tmp &= ~0x8; writel(tmp, fep->hwp + FEC_R_CNTRL); if (dev->flags & IFF_ALLMULTI) { /* Catch all multicast addresses, so set the * filter to all 1's */ writel(0xffffffff, fep->hwp + FEC_GRP_HASH_TABLE_HIGH); writel(0xffffffff, fep->hwp + FEC_GRP_HASH_TABLE_LOW); return; } /* Clear filter and add the addresses in hash register */ writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH); writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW); dmi = dev->mc_list; for (j = 0; j < dev->mc_count; j++, dmi = dmi->next) { /* Only support group multicast for now */ if (!(dmi->dmi_addr[0] & 1)) continue; /* calculate crc32 value of mac address */ crc = 0xffffffff; for (i = 0; i < dmi->dmi_addrlen; i++) { data = dmi->dmi_addr[i]; for (bit = 0; bit < 8; bit++, data >>= 1) { crc = (crc >> 1) ^ (((crc ^ data) & 1) ? CRC32_POLY : 0); } } /* only upper 6 bits (HASH_BITS) are used * which point to specific bit in he hash registers */ hash = (crc >> (32 - HASH_BITS)) & 0x3f; if (hash > 31) { tmp = readl(fep->hwp + FEC_GRP_HASH_TABLE_HIGH); tmp |= 1 << (hash - 32); writel(tmp, fep->hwp + FEC_GRP_HASH_TABLE_HIGH); } else { tmp = readl(fep->hwp + FEC_GRP_HASH_TABLE_LOW); tmp |= 1 << hash; writel(tmp, fep->hwp + FEC_GRP_HASH_TABLE_LOW); } } } /* Set a MAC change in hardware. */ static int fec_set_mac_address(struct net_device *dev, void *p) { struct fec_enet_private *fep = netdev_priv(dev); struct sockaddr *addr = p; if (!is_valid_ether_addr(addr->sa_data)) return -EADDRNOTAVAIL; memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); writel(dev->dev_addr[3] | (dev->dev_addr[2] << 8) | (dev->dev_addr[1] << 16) | (dev->dev_addr[0] << 24), fep->hwp + FEC_ADDR_LOW); writel((dev->dev_addr[5] << 16) | (dev->dev_addr[4] << 24), fep + FEC_ADDR_HIGH); return 0; } static const struct net_device_ops fec_netdev_ops = { .ndo_open = fec_enet_open, .ndo_stop = fec_enet_close, .ndo_start_xmit = fec_enet_start_xmit, .ndo_set_multicast_list = set_multicast_list, .ndo_validate_addr = eth_validate_addr, .ndo_tx_timeout = fec_timeout, .ndo_set_mac_address = fec_set_mac_address, }; /* * XXX: We need to clean up on failure exits here. * * index is only used in legacy code */ int __init fec_enet_init(struct net_device *dev, int index) { struct fec_enet_private *fep = netdev_priv(dev); struct bufdesc *cbd_base; int i; /* Allocate memory for buffer descriptors. */ cbd_base = dma_alloc_coherent(NULL, PAGE_SIZE, &fep->bd_dma, GFP_KERNEL); if (!cbd_base) { printk("FEC: allocate descriptor memory failed?\n"); return -ENOMEM; } spin_lock_init(&fep->hw_lock); spin_lock_init(&fep->mii_lock); fep->index = index; fep->hwp = (void __iomem *)dev->base_addr; fep->netdev = dev; /* Set the Ethernet address */ #ifdef CONFIG_M5272 fec_get_mac(dev); #else { unsigned long l; l = readl(fep->hwp + FEC_ADDR_LOW); dev->dev_addr[0] = (unsigned char)((l & 0xFF000000) >> 24); dev->dev_addr[1] = (unsigned char)((l & 0x00FF0000) >> 16); dev->dev_addr[2] = (unsigned char)((l & 0x0000FF00) >> 8); dev->dev_addr[3] = (unsigned char)((l & 0x000000FF) >> 0); l = readl(fep->hwp + FEC_ADDR_HIGH); dev->dev_addr[4] = (unsigned char)((l & 0xFF000000) >> 24); dev->dev_addr[5] = (unsigned char)((l & 0x00FF0000) >> 16); } #endif /* Set receive and transmit descriptor base. */ fep->rx_bd_base = cbd_base; fep->tx_bd_base = cbd_base + RX_RING_SIZE; #ifdef HAVE_mii_link_interrupt fec_request_mii_intr(dev); #endif /* The FEC Ethernet specific entries in the device structure */ dev->watchdog_timeo = TX_TIMEOUT; dev->netdev_ops = &fec_netdev_ops; for (i=0; iphy_speed = ((((clk_get_rate(fep->clk) / 2 + 4999999) / 2500000) / 2) & 0x3F) << 1; fec_restart(dev, 0); /* Queue up command to detect the PHY and initialize the * remainder of the interface. */ fep->phy_id_done = 0; fep->phy_addr = 0; mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy); return 0; } /* This function is called to start or restart the FEC during a link * change. This only happens when switching between half and full * duplex. */ static void fec_restart(struct net_device *dev, int duplex) { struct fec_enet_private *fep = netdev_priv(dev); struct bufdesc *bdp; int i; /* Whack a reset. We should wait for this. */ writel(1, fep->hwp + FEC_ECNTRL); udelay(10); /* Clear any outstanding interrupt. */ writel(0xffc00000, fep->hwp + FEC_IEVENT); /* Reset all multicast. */ writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH); writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW); #ifndef CONFIG_M5272 writel(0, fep->hwp + FEC_HASH_TABLE_HIGH); writel(0, fep->hwp + FEC_HASH_TABLE_LOW); #endif /* Set maximum receive buffer size. */ writel(PKT_MAXBLR_SIZE, fep->hwp + FEC_R_BUFF_SIZE); /* Set receive and transmit descriptor base. */ writel(fep->bd_dma, fep->hwp + FEC_R_DES_START); writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc) * RX_RING_SIZE, fep->hwp + FEC_X_DES_START); fep->dirty_tx = fep->cur_tx = fep->tx_bd_base; fep->cur_rx = fep->rx_bd_base; /* Reset SKB transmit buffers. */ fep->skb_cur = fep->skb_dirty = 0; for (i = 0; i <= TX_RING_MOD_MASK; i++) { if (fep->tx_skbuff[i]) { dev_kfree_skb_any(fep->tx_skbuff[i]); fep->tx_skbuff[i] = NULL; } } /* Initialize the receive buffer descriptors. */ bdp = fep->rx_bd_base; for (i = 0; i < RX_RING_SIZE; i++) { /* Initialize the BD for every fragment in the page. */ bdp->cbd_sc = BD_ENET_RX_EMPTY; bdp++; } /* Set the last buffer to wrap */ bdp--; bdp->cbd_sc |= BD_SC_WRAP; /* ...and the same for transmit */ bdp = fep->tx_bd_base; for (i = 0; i < TX_RING_SIZE; i++) { /* Initialize the BD for every fragment in the page. */ bdp->cbd_sc = 0; bdp->cbd_bufaddr = 0; bdp++; } /* Set the last buffer to wrap */ bdp--; bdp->cbd_sc |= BD_SC_WRAP; /* Enable MII mode */ if (duplex) { /* MII enable / FD enable */ writel(OPT_FRAME_SIZE | 0x04, fep->hwp + FEC_R_CNTRL); writel(0x04, fep->hwp + FEC_X_CNTRL); } else { /* MII enable / No Rcv on Xmit */ writel(OPT_FRAME_SIZE | 0x06, fep->hwp + FEC_R_CNTRL); writel(0x0, fep->hwp + FEC_X_CNTRL); } fep->full_duplex = duplex; /* Set MII speed */ writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED); /* And last, enable the transmit and receive processing */ writel(2, fep->hwp + FEC_ECNTRL); writel(0, fep->hwp + FEC_R_DES_ACTIVE); /* Enable interrupts we wish to service */ writel(FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII, fep->hwp + FEC_IMASK); } static void fec_stop(struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); /* We cannot expect a graceful transmit stop without link !!! */ if (fep->link) { writel(1, fep->hwp + FEC_X_CNTRL); /* Graceful transmit stop */ udelay(10); if (!(readl(fep->hwp + FEC_IEVENT) & FEC_ENET_GRA)) printk("fec_stop : Graceful transmit stop did not complete !\n"); } /* Whack a reset. We should wait for this. */ writel(1, fep->hwp + FEC_ECNTRL); udelay(10); /* Clear outstanding MII command interrupts. */ writel(FEC_ENET_MII, fep->hwp + FEC_IEVENT); writel(FEC_ENET_MII, fep->hwp + FEC_IMASK); writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED); } static int __devinit fec_probe(struct platform_device *pdev) { struct fec_enet_private *fep; struct net_device *ndev; int i, irq, ret = 0; struct resource *r; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!r) return -ENXIO; r = request_mem_region(r->start, resource_size(r), pdev->name); if (!r) return -EBUSY; /* Init network device */ ndev = alloc_etherdev(sizeof(struct fec_enet_private)); if (!ndev) return -ENOMEM; SET_NETDEV_DEV(ndev, &pdev->dev); /* setup board info structure */ fep = netdev_priv(ndev); memset(fep, 0, sizeof(*fep)); ndev->base_addr = (unsigned long)ioremap(r->start, resource_size(r)); if (!ndev->base_addr) { ret = -ENOMEM; goto failed_ioremap; } platform_set_drvdata(pdev, ndev); /* This device has up to three irqs on some platforms */ for (i = 0; i < 3; i++) { irq = platform_get_irq(pdev, i); if (i && irq < 0) break; ret = request_irq(irq, fec_enet_interrupt, IRQF_DISABLED, pdev->name, ndev); if (ret) { while (i >= 0) { irq = platform_get_irq(pdev, i); free_irq(irq, ndev); i--; } goto failed_irq; } } fep->clk = clk_get(&pdev->dev, "fec_clk"); if (IS_ERR(fep->clk)) { ret = PTR_ERR(fep->clk); goto failed_clk; } clk_enable(fep->clk); ret = fec_enet_init(ndev, 0); if (ret) goto failed_init; ret = register_netdev(ndev); if (ret) goto failed_register; return 0; failed_register: failed_init: clk_disable(fep->clk); clk_put(fep->clk); failed_clk: for (i = 0; i < 3; i++) { irq = platform_get_irq(pdev, i); if (irq > 0) free_irq(irq, ndev); } failed_irq: iounmap((void __iomem *)ndev->base_addr); failed_ioremap: free_netdev(ndev); return ret; } static int __devexit fec_drv_remove(struct platform_device *pdev) { struct net_device *ndev = platform_get_drvdata(pdev); struct fec_enet_private *fep = netdev_priv(ndev); platform_set_drvdata(pdev, NULL); fec_stop(ndev); clk_disable(fep->clk); clk_put(fep->clk); iounmap((void __iomem *)ndev->base_addr); unregister_netdev(ndev); free_netdev(ndev); return 0; } static int fec_suspend(struct platform_device *dev, pm_message_t state) { struct net_device *ndev = platform_get_drvdata(dev); struct fec_enet_private *fep; if (ndev) { fep = netdev_priv(ndev); if (netif_running(ndev)) { netif_device_detach(ndev); fec_stop(ndev); } } return 0; } static int fec_resume(struct platform_device *dev) { struct net_device *ndev = platform_get_drvdata(dev); if (ndev) { if (netif_running(ndev)) { fec_enet_init(ndev, 0); netif_device_attach(ndev); } } return 0; } static struct platform_driver fec_driver = { .driver = { .name = "fec", .owner = THIS_MODULE, }, .probe = fec_probe, .remove = __devexit_p(fec_drv_remove), .suspend = fec_suspend, .resume = fec_resume, }; static int __init fec_enet_module_init(void) { printk(KERN_INFO "FEC Ethernet Driver\n"); return platform_driver_register(&fec_driver); } static void __exit fec_enet_cleanup(void) { platform_driver_unregister(&fec_driver); } module_exit(fec_enet_cleanup); module_init(fec_enet_module_init); MODULE_LICENSE("GPL");