/* * Amiga Buddha, Catweasel and X-Surf IDE Driver * * Copyright (C) 1997, 2001 by Geert Uytterhoeven and others * * This driver was written based on the specifications in README.buddha and * the X-Surf info from Inside_XSurf.txt available at * http://www.jschoenfeld.com * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive for * more details. * * TODO: * - test it :-) * - tune the timings using the speed-register */ #include <linux/types.h> #include <linux/mm.h> #include <linux/interrupt.h> #include <linux/blkdev.h> #include <linux/zorro.h> #include <linux/ide.h> #include <linux/init.h> #include <asm/amigahw.h> #include <asm/amigaints.h> /* * The Buddha has 2 IDE interfaces, the Catweasel has 3, X-Surf has 2 */ #define BUDDHA_NUM_HWIFS 2 #define CATWEASEL_NUM_HWIFS 3 #define XSURF_NUM_HWIFS 2 #define MAX_NUM_HWIFS 3 /* * Bases of the IDE interfaces (relative to the board address) */ #define BUDDHA_BASE1 0x800 #define BUDDHA_BASE2 0xa00 #define BUDDHA_BASE3 0xc00 #define XSURF_BASE1 0xb000 /* 2.5" Interface */ #define XSURF_BASE2 0xd000 /* 3.5" Interface */ static u_int buddha_bases[CATWEASEL_NUM_HWIFS] __initdata = { BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3 }; static u_int xsurf_bases[XSURF_NUM_HWIFS] __initdata = { XSURF_BASE1, XSURF_BASE2 }; /* * Offsets from one of the above bases */ #define BUDDHA_CONTROL 0x11a /* * Other registers */ #define BUDDHA_IRQ1 0xf00 /* MSB = 1, Harddisk is source of */ #define BUDDHA_IRQ2 0xf40 /* interrupt */ #define BUDDHA_IRQ3 0xf80 #define XSURF_IRQ1 0x7e #define XSURF_IRQ2 0x7e static int buddha_irqports[CATWEASEL_NUM_HWIFS] __initdata = { BUDDHA_IRQ1, BUDDHA_IRQ2, BUDDHA_IRQ3 }; static int xsurf_irqports[XSURF_NUM_HWIFS] __initdata = { XSURF_IRQ1, XSURF_IRQ2 }; #define BUDDHA_IRQ_MR 0xfc0 /* master interrupt enable */ /* * Board information */ typedef enum BuddhaType_Enum { BOARD_BUDDHA, BOARD_CATWEASEL, BOARD_XSURF } BuddhaType; static const char *buddha_board_name[] = { "Buddha", "Catweasel", "X-Surf" }; /* * Check and acknowledge the interrupt status */ static int buddha_ack_intr(ide_hwif_t *hwif) { unsigned char ch; ch = z_readb(hwif->io_ports.irq_addr); if (!(ch & 0x80)) return 0; return 1; } static int xsurf_ack_intr(ide_hwif_t *hwif) { unsigned char ch; ch = z_readb(hwif->io_ports.irq_addr); /* X-Surf needs a 0 written to IRQ register to ensure ISA bit A11 stays at 0 */ z_writeb(0, hwif->io_ports.irq_addr); if (!(ch & 0x80)) return 0; return 1; } static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base, unsigned long ctl, unsigned long irq_port, ide_ack_intr_t *ack_intr) { int i; memset(hw, 0, sizeof(*hw)); hw->io_ports.data_addr = base; for (i = 1; i < 8; i++) hw->io_ports_array[i] = base + 2 + i * 4; hw->io_ports.ctl_addr = ctl; hw->io_ports.irq_addr = irq_port; hw->irq = IRQ_AMIGA_PORTS; hw->ack_intr = ack_intr; hw->chipset = ide_generic; } static const struct ide_port_info buddha_port_info = { .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA, .irq_flags = IRQF_SHARED, }; /* * Probe for a Buddha or Catweasel IDE interface */ static int __init buddha_init(void) { struct zorro_dev *z = NULL; u_long buddha_board = 0; BuddhaType type; int buddha_num_hwifs, i; while ((z = zorro_find_device(ZORRO_WILDCARD, z))) { unsigned long board; hw_regs_t hw[MAX_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL }; if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) { buddha_num_hwifs = BUDDHA_NUM_HWIFS; type=BOARD_BUDDHA; } else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL) { buddha_num_hwifs = CATWEASEL_NUM_HWIFS; type=BOARD_CATWEASEL; } else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) { buddha_num_hwifs = XSURF_NUM_HWIFS; type=BOARD_XSURF; } else continue; board = z->resource.start; if(type != BOARD_XSURF) { if (!request_mem_region(board+BUDDHA_BASE1, 0x800, "IDE")) continue; } else { if (!request_mem_region(board+XSURF_BASE1, 0x1000, "IDE")) continue; if (!request_mem_region(board+XSURF_BASE2, 0x1000, "IDE")) goto fail_base2; if (!request_mem_region(board+XSURF_IRQ1, 0x8, "IDE")) { release_mem_region(board+XSURF_BASE2, 0x1000); fail_base2: release_mem_region(board+XSURF_BASE1, 0x1000); continue; } } buddha_board = ZTWO_VADDR(board); /* write to BUDDHA_IRQ_MR to enable the board IRQ */ /* X-Surf doesn't have this. IRQs are always on */ if (type != BOARD_XSURF) z_writeb(0, buddha_board+BUDDHA_IRQ_MR); printk(KERN_INFO "ide: %s IDE controller\n", buddha_board_name[type]); for (i = 0; i < buddha_num_hwifs; i++) { unsigned long base, ctl, irq_port; ide_ack_intr_t *ack_intr; if (type != BOARD_XSURF) { base = buddha_board + buddha_bases[i]; ctl = base + BUDDHA_CONTROL; irq_port = buddha_board + buddha_irqports[i]; ack_intr = buddha_ack_intr; } else { base = buddha_board + xsurf_bases[i]; /* X-Surf has no CS1* (Control/AltStat) */ ctl = 0; irq_port = buddha_board + xsurf_irqports[i]; ack_intr = xsurf_ack_intr; } buddha_setup_ports(&hw[i], base, ctl, irq_port, ack_intr); hws[i] = &hw[i]; } ide_host_add(&buddha_port_info, hws, NULL); } return 0; } module_init(buddha_init); MODULE_LICENSE("GPL");