/* * i2c_adap_pxa.c * * I2C adapter for the PXA I2C bus access. * * Copyright (C) 2002 Intrinsyc Software Inc. * Copyright (C) 2004-2005 Deep Blue Solutions Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * History: * Apr 2002: Initial version [CS] * Jun 2002: Properly seperated algo/adap [FB] * Jan 2003: Fixed several bugs concerning interrupt handling [Kai-Uwe Bloem] * Jan 2003: added limited signal handling [Kai-Uwe Bloem] * Sep 2004: Major rework to ensure efficient bus handling [RMK] * Dec 2004: Added support for PXA27x and slave device probing [Liam Girdwood] * Feb 2005: Rework slave mode handling [RMK] */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include struct pxa_i2c { spinlock_t lock; wait_queue_head_t wait; struct i2c_msg *msg; unsigned int msg_num; unsigned int msg_idx; unsigned int msg_ptr; unsigned int slave_addr; struct i2c_adapter adap; struct clk *clk; #ifdef CONFIG_I2C_PXA_SLAVE struct i2c_slave_client *slave; #endif unsigned int irqlogidx; u32 isrlog[32]; u32 icrlog[32]; void __iomem *reg_base; unsigned long iobase; unsigned long iosize; int irq; int use_pio; }; #define _IBMR(i2c) ((i2c)->reg_base + 0) #define _IDBR(i2c) ((i2c)->reg_base + 8) #define _ICR(i2c) ((i2c)->reg_base + 0x10) #define _ISR(i2c) ((i2c)->reg_base + 0x18) #define _ISAR(i2c) ((i2c)->reg_base + 0x20) /* * I2C Slave mode address */ #define I2C_PXA_SLAVE_ADDR 0x1 #ifdef DEBUG struct bits { u32 mask; const char *set; const char *unset; }; #define PXA_BIT(m, s, u) { .mask = m, .set = s, .unset = u } static inline void decode_bits(const char *prefix, const struct bits *bits, int num, u32 val) { printk("%s %08x: ", prefix, val); while (num--) { const char *str = val & bits->mask ? bits->set : bits->unset; if (str) printk("%s ", str); bits++; } } static const struct bits isr_bits[] = { PXA_BIT(ISR_RWM, "RX", "TX"), PXA_BIT(ISR_ACKNAK, "NAK", "ACK"), PXA_BIT(ISR_UB, "Bsy", "Rdy"), PXA_BIT(ISR_IBB, "BusBsy", "BusRdy"), PXA_BIT(ISR_SSD, "SlaveStop", NULL), PXA_BIT(ISR_ALD, "ALD", NULL), PXA_BIT(ISR_ITE, "TxEmpty", NULL), PXA_BIT(ISR_IRF, "RxFull", NULL), PXA_BIT(ISR_GCAD, "GenCall", NULL), PXA_BIT(ISR_SAD, "SlaveAddr", NULL), PXA_BIT(ISR_BED, "BusErr", NULL), }; static void decode_ISR(unsigned int val) { decode_bits(KERN_DEBUG "ISR", isr_bits, ARRAY_SIZE(isr_bits), val); printk("\n"); } static const struct bits icr_bits[] = { PXA_BIT(ICR_START, "START", NULL), PXA_BIT(ICR_STOP, "STOP", NULL), PXA_BIT(ICR_ACKNAK, "ACKNAK", NULL), PXA_BIT(ICR_TB, "TB", NULL), PXA_BIT(ICR_MA, "MA", NULL), PXA_BIT(ICR_SCLE, "SCLE", "scle"), PXA_BIT(ICR_IUE, "IUE", "iue"), PXA_BIT(ICR_GCD, "GCD", NULL), PXA_BIT(ICR_ITEIE, "ITEIE", NULL), PXA_BIT(ICR_IRFIE, "IRFIE", NULL), PXA_BIT(ICR_BEIE, "BEIE", NULL), PXA_BIT(ICR_SSDIE, "SSDIE", NULL), PXA_BIT(ICR_ALDIE, "ALDIE", NULL), PXA_BIT(ICR_SADIE, "SADIE", NULL), PXA_BIT(ICR_UR, "UR", "ur"), }; #ifdef CONFIG_I2C_PXA_SLAVE static void decode_ICR(unsigned int val) { decode_bits(KERN_DEBUG "ICR", icr_bits, ARRAY_SIZE(icr_bits), val); printk("\n"); } #endif static unsigned int i2c_debug = DEBUG; static void i2c_pxa_show_state(struct pxa_i2c *i2c, int lno, const char *fname) { dev_dbg(&i2c->adap.dev, "state:%s:%d: ISR=%08x, ICR=%08x, IBMR=%02x\n", fname, lno, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c))); } #define show_state(i2c) i2c_pxa_show_state(i2c, __LINE__, __func__) #else #define i2c_debug 0 #define show_state(i2c) do { } while (0) #define decode_ISR(val) do { } while (0) #define decode_ICR(val) do { } while (0) #endif #define eedbg(lvl, x...) do { if ((lvl) < 1) { printk(KERN_DEBUG "" x); } } while(0) static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret); static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id); static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why) { unsigned int i; printk("i2c: error: %s\n", why); printk("i2c: msg_num: %d msg_idx: %d msg_ptr: %d\n", i2c->msg_num, i2c->msg_idx, i2c->msg_ptr); printk("i2c: ICR: %08x ISR: %08x\n" "i2c: log: ", readl(_ICR(i2c)), readl(_ISR(i2c))); for (i = 0; i < i2c->irqlogidx; i++) printk("[%08x:%08x] ", i2c->isrlog[i], i2c->icrlog[i]); printk("\n"); } static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c) { return !(readl(_ICR(i2c)) & ICR_SCLE); } static void i2c_pxa_abort(struct pxa_i2c *i2c) { unsigned long timeout = jiffies + HZ/4; if (i2c_pxa_is_slavemode(i2c)) { dev_dbg(&i2c->adap.dev, "%s: called in slave mode\n", __func__); return; } while (time_before(jiffies, timeout) && (readl(_IBMR(i2c)) & 0x1) == 0) { unsigned long icr = readl(_ICR(i2c)); icr &= ~ICR_START; icr |= ICR_ACKNAK | ICR_STOP | ICR_TB; writel(icr, _ICR(i2c)); show_state(i2c); msleep(1); } writel(readl(_ICR(i2c)) & ~(ICR_MA | ICR_START | ICR_STOP), _ICR(i2c)); } static int i2c_pxa_wait_bus_not_busy(struct pxa_i2c *i2c) { int timeout = DEF_TIMEOUT; while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) { if ((readl(_ISR(i2c)) & ISR_SAD) != 0) timeout += 4; msleep(2); show_state(i2c); } if (timeout <= 0) show_state(i2c); return timeout <= 0 ? I2C_RETRY : 0; } static int i2c_pxa_wait_master(struct pxa_i2c *i2c) { unsigned long timeout = jiffies + HZ*4; while (time_before(jiffies, timeout)) { if (i2c_debug > 1) dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n", __func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c))); if (readl(_ISR(i2c)) & ISR_SAD) { if (i2c_debug > 0) dev_dbg(&i2c->adap.dev, "%s: Slave detected\n", __func__); goto out; } /* wait for unit and bus being not busy, and we also do a * quick check of the i2c lines themselves to ensure they've * gone high... */ if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) == 0 && readl(_IBMR(i2c)) == 3) { if (i2c_debug > 0) dev_dbg(&i2c->adap.dev, "%s: done\n", __func__); return 1; } msleep(1); } if (i2c_debug > 0) dev_dbg(&i2c->adap.dev, "%s: did not free\n", __func__); out: return 0; } static int i2c_pxa_set_master(struct pxa_i2c *i2c) { if (i2c_debug) dev_dbg(&i2c->adap.dev, "setting to bus master\n"); if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) != 0) { dev_dbg(&i2c->adap.dev, "%s: unit is busy\n", __func__); if (!i2c_pxa_wait_master(i2c)) { dev_dbg(&i2c->adap.dev, "%s: error: unit busy\n", __func__); return I2C_RETRY; } } writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c)); return 0; } #ifdef CONFIG_I2C_PXA_SLAVE static int i2c_pxa_wait_slave(struct pxa_i2c *i2c) { unsigned long timeout = jiffies + HZ*1; /* wait for stop */ show_state(i2c); while (time_before(jiffies, timeout)) { if (i2c_debug > 1) dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n", __func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c))); if ((readl(_ISR(i2c)) & (ISR_UB|ISR_IBB)) == 0 || (readl(_ISR(i2c)) & ISR_SAD) != 0 || (readl(_ICR(i2c)) & ICR_SCLE) == 0) { if (i2c_debug > 1) dev_dbg(&i2c->adap.dev, "%s: done\n", __func__); return 1; } msleep(1); } if (i2c_debug > 0) dev_dbg(&i2c->adap.dev, "%s: did not free\n", __func__); return 0; } /* * clear the hold on the bus, and take of anything else * that has been configured */ static void i2c_pxa_set_slave(struct pxa_i2c *i2c, int errcode) { show_state(i2c); if (errcode < 0) { udelay(100); /* simple delay */ } else { /* we need to wait for the stop condition to end */ /* if we where in stop, then clear... */ if (readl(_ICR(i2c)) & ICR_STOP) { udelay(100); writel(readl(_ICR(i2c)) & ~ICR_STOP, _ICR(i2c)); } if (!i2c_pxa_wait_slave(i2c)) { dev_err(&i2c->adap.dev, "%s: wait timedout\n", __func__); return; } } writel(readl(_ICR(i2c)) & ~(ICR_STOP|ICR_ACKNAK|ICR_MA), _ICR(i2c)); writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c)); if (i2c_debug) { dev_dbg(&i2c->adap.dev, "ICR now %08x, ISR %08x\n", readl(_ICR(i2c)), readl(_ISR(i2c))); decode_ICR(readl(_ICR(i2c))); } } #else #define i2c_pxa_set_slave(i2c, err) do { } while (0) #endif static void i2c_pxa_reset(struct pxa_i2c *i2c) { pr_debug("Resetting I2C Controller Unit\n"); /* abort any transfer currently under way */ i2c_pxa_abort(i2c); /* reset according to 9.8 */ writel(ICR_UR, _ICR(i2c)); writel(I2C_ISR_INIT, _ISR(i2c)); writel(readl(_ICR(i2c)) & ~ICR_UR, _ICR(i2c)); writel(i2c->slave_addr, _ISAR(i2c)); /* set control register values */ writel(I2C_ICR_INIT, _ICR(i2c)); #ifdef CONFIG_I2C_PXA_SLAVE dev_info(&i2c->adap.dev, "Enabling slave mode\n"); writel(readl(_ICR(i2c)) | ICR_SADIE | ICR_ALDIE | ICR_SSDIE, _ICR(i2c)); #endif i2c_pxa_set_slave(i2c, 0); /* enable unit */ writel(readl(_ICR(i2c)) | ICR_IUE, _ICR(i2c)); udelay(100); } #ifdef CONFIG_I2C_PXA_SLAVE /* * PXA I2C Slave mode */ static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr) { if (isr & ISR_BED) { /* what should we do here? */ } else { int ret = 0; if (i2c->slave != NULL) ret = i2c->slave->read(i2c->slave->data); writel(ret, _IDBR(i2c)); writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); /* allow next byte */ } } static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr) { unsigned int byte = readl(_IDBR(i2c)); if (i2c->slave != NULL) i2c->slave->write(i2c->slave->data, byte); writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); } static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr) { int timeout; if (i2c_debug > 0) dev_dbg(&i2c->adap.dev, "SAD, mode is slave-%cx\n", (isr & ISR_RWM) ? 'r' : 't'); if (i2c->slave != NULL) i2c->slave->event(i2c->slave->data, (isr & ISR_RWM) ? I2C_SLAVE_EVENT_START_READ : I2C_SLAVE_EVENT_START_WRITE); /* * slave could interrupt in the middle of us generating a * start condition... if this happens, we'd better back off * and stop holding the poor thing up */ writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c)); writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); timeout = 0x10000; while (1) { if ((readl(_IBMR(i2c)) & 2) == 2) break; timeout--; if (timeout <= 0) { dev_err(&i2c->adap.dev, "timeout waiting for SCL high\n"); break; } } writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c)); } static void i2c_pxa_slave_stop(struct pxa_i2c *i2c) { if (i2c_debug > 2) dev_dbg(&i2c->adap.dev, "ISR: SSD (Slave Stop)\n"); if (i2c->slave != NULL) i2c->slave->event(i2c->slave->data, I2C_SLAVE_EVENT_STOP); if (i2c_debug > 2) dev_dbg(&i2c->adap.dev, "ISR: SSD (Slave Stop) acked\n"); /* * If we have a master-mode message waiting, * kick it off now that the slave has completed. */ if (i2c->msg) i2c_pxa_master_complete(i2c, I2C_RETRY); } #else static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr) { if (isr & ISR_BED) { /* what should we do here? */ } else { writel(0, _IDBR(i2c)); writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); } } static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr) { writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c)); } static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr) { int timeout; /* * slave could interrupt in the middle of us generating a * start condition... if this happens, we'd better back off * and stop holding the poor thing up */ writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c)); writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c)); timeout = 0x10000; while (1) { if ((readl(_IBMR(i2c)) & 2) == 2) break; timeout--; if (timeout <= 0) { dev_err(&i2c->adap.dev, "timeout waiting for SCL high\n"); break; } } writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c)); } static void i2c_pxa_slave_stop(struct pxa_i2c *i2c) { if (i2c->msg) i2c_pxa_master_complete(i2c, I2C_RETRY); } #endif /* * PXA I2C Master mode */ static inline unsigned int i2c_pxa_addr_byte(struct i2c_msg *msg) { unsigned int addr = (msg->addr & 0x7f) << 1; if (msg->flags & I2C_M_RD) addr |= 1; return addr; } static inline void i2c_pxa_start_message(struct pxa_i2c *i2c) { u32 icr; /* * Step 1: target slave address into IDBR */ writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c)); /* * Step 2: initiate the write. */ icr = readl(_ICR(i2c)) & ~(ICR_STOP | ICR_ALDIE); writel(icr | ICR_START | ICR_TB, _ICR(i2c)); } static inline void i2c_pxa_stop_message(struct pxa_i2c *i2c) { u32 icr; /* * Clear the STOP and ACK flags */ icr = readl(_ICR(i2c)); icr &= ~(ICR_STOP | ICR_ACKNAK); writel(icr, _ICR(i2c)); } static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c) { /* make timeout the same as for interrupt based functions */ long timeout = 2 * DEF_TIMEOUT; /* * Wait for the bus to become free. */ while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) { udelay(1000); show_state(i2c); } if (timeout <= 0) { show_state(i2c); dev_err(&i2c->adap.dev, "i2c_pxa: timeout waiting for bus free\n"); return I2C_RETRY; } /* * Set master mode. */ writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c)); return 0; } static int i2c_pxa_do_pio_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num) { unsigned long timeout = 500000; /* 5 seconds */ int ret = 0; ret = i2c_pxa_pio_set_master(i2c); if (ret) goto out; i2c->msg = msg; i2c->msg_num = num; i2c->msg_idx = 0; i2c->msg_ptr = 0; i2c->irqlogidx = 0; i2c_pxa_start_message(i2c); while (timeout-- && i2c->msg_num > 0) { i2c_pxa_handler(0, i2c); udelay(10); } i2c_pxa_stop_message(i2c); /* * We place the return code in i2c->msg_idx. */ ret = i2c->msg_idx; out: if (timeout == 0) i2c_pxa_scream_blue_murder(i2c, "timeout"); return ret; } /* * We are protected by the adapter bus mutex. */ static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num) { long timeout; int ret; /* * Wait for the bus to become free. */ ret = i2c_pxa_wait_bus_not_busy(i2c); if (ret) { dev_err(&i2c->adap.dev, "i2c_pxa: timeout waiting for bus free\n"); goto out; } /* * Set master mode. */ ret = i2c_pxa_set_master(i2c); if (ret) { dev_err(&i2c->adap.dev, "i2c_pxa_set_master: error %d\n", ret); goto out; } spin_lock_irq(&i2c->lock); i2c->msg = msg; i2c->msg_num = num; i2c->msg_idx = 0; i2c->msg_ptr = 0; i2c->irqlogidx = 0; i2c_pxa_start_message(i2c); spin_unlock_irq(&i2c->lock); /* * The rest of the processing occurs in the interrupt handler. */ timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5); i2c_pxa_stop_message(i2c); /* * We place the return code in i2c->msg_idx. */ ret = i2c->msg_idx; if (timeout == 0) i2c_pxa_scream_blue_murder(i2c, "timeout"); out: return ret; } static int i2c_pxa_pio_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) { struct pxa_i2c *i2c = adap->algo_data; int ret, i; /* If the I2C controller is disabled we need to reset it (probably due to a suspend/resume destroying state). We do this here as we can then avoid worrying about resuming the controller before its users. */ if (!(readl(_ICR(i2c)) & ICR_IUE)) i2c_pxa_reset(i2c); for (i = adap->retries; i >= 0; i--) { ret = i2c_pxa_do_pio_xfer(i2c, msgs, num); if (ret != I2C_RETRY) goto out; if (i2c_debug) dev_dbg(&adap->dev, "Retrying transmission\n"); udelay(100); } i2c_pxa_scream_blue_murder(i2c, "exhausted retries"); ret = -EREMOTEIO; out: i2c_pxa_set_slave(i2c, ret); return ret; } /* * i2c_pxa_master_complete - complete the message and wake up. */ static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret) { i2c->msg_ptr = 0; i2c->msg = NULL; i2c->msg_idx ++; i2c->msg_num = 0; if (ret) i2c->msg_idx = ret; if (!i2c->use_pio) wake_up(&i2c->wait); } static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr) { u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB); again: /* * If ISR_ALD is set, we lost arbitration. */ if (isr & ISR_ALD) { /* * Do we need to do anything here? The PXA docs * are vague about what happens. */ i2c_pxa_scream_blue_murder(i2c, "ALD set"); /* * We ignore this error. We seem to see spurious ALDs * for seemingly no reason. If we handle them as I think * they should, we end up causing an I2C error, which * is painful for some systems. */ return; /* ignore */ } if (isr & ISR_BED) { int ret = BUS_ERROR; /* * I2C bus error - either the device NAK'd us, or * something more serious happened. If we were NAK'd * on the initial address phase, we can retry. */ if (isr & ISR_ACKNAK) { if (i2c->msg_ptr == 0 && i2c->msg_idx == 0) ret = I2C_RETRY; else ret = XFER_NAKED; } i2c_pxa_master_complete(i2c, ret); } else if (isr & ISR_RWM) { /* * Read mode. We have just sent the address byte, and * now we must initiate the transfer. */ if (i2c->msg_ptr == i2c->msg->len - 1 && i2c->msg_idx == i2c->msg_num - 1) icr |= ICR_STOP | ICR_ACKNAK; icr |= ICR_ALDIE | ICR_TB; } else if (i2c->msg_ptr < i2c->msg->len) { /* * Write mode. Write the next data byte. */ writel(i2c->msg->buf[i2c->msg_ptr++], _IDBR(i2c)); icr |= ICR_ALDIE | ICR_TB; /* * If this is the last byte of the last message, send * a STOP. */ if (i2c->msg_ptr == i2c->msg->len && i2c->msg_idx == i2c->msg_num - 1) icr |= ICR_STOP; } else if (i2c->msg_idx < i2c->msg_num - 1) { /* * Next segment of the message. */ i2c->msg_ptr = 0; i2c->msg_idx ++; i2c->msg++; /* * If we aren't doing a repeated start and address, * go back and try to send the next byte. Note that * we do not support switching the R/W direction here. */ if (i2c->msg->flags & I2C_M_NOSTART) goto again; /* * Write the next address. */ writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c)); /* * And trigger a repeated start, and send the byte. */ icr &= ~ICR_ALDIE; icr |= ICR_START | ICR_TB; } else { if (i2c->msg->len == 0) { /* * Device probes have a message length of zero * and need the bus to be reset before it can * be used again. */ i2c_pxa_reset(i2c); } i2c_pxa_master_complete(i2c, 0); } i2c->icrlog[i2c->irqlogidx-1] = icr; writel(icr, _ICR(i2c)); show_state(i2c); } static void i2c_pxa_irq_rxfull(struct pxa_i2c *i2c, u32 isr) { u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB); /* * Read the byte. */ i2c->msg->buf[i2c->msg_ptr++] = readl(_IDBR(i2c)); if (i2c->msg_ptr < i2c->msg->len) { /* * If this is the last byte of the last * message, send a STOP. */ if (i2c->msg_ptr == i2c->msg->len - 1) icr |= ICR_STOP | ICR_ACKNAK; icr |= ICR_ALDIE | ICR_TB; } else { i2c_pxa_master_complete(i2c, 0); } i2c->icrlog[i2c->irqlogidx-1] = icr; writel(icr, _ICR(i2c)); } static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id) { struct pxa_i2c *i2c = dev_id; u32 isr = readl(_ISR(i2c)); if (i2c_debug > 2 && 0) { dev_dbg(&i2c->adap.dev, "%s: ISR=%08x, ICR=%08x, IBMR=%02x\n", __func__, isr, readl(_ICR(i2c)), readl(_IBMR(i2c))); decode_ISR(isr); } if (i2c->irqlogidx < ARRAY_SIZE(i2c->isrlog)) i2c->isrlog[i2c->irqlogidx++] = isr; show_state(i2c); /* * Always clear all pending IRQs. */ writel(isr & (ISR_SSD|ISR_ALD|ISR_ITE|ISR_IRF|ISR_SAD|ISR_BED), _ISR(i2c)); if (isr & ISR_SAD) i2c_pxa_slave_start(i2c, isr); if (isr & ISR_SSD) i2c_pxa_slave_stop(i2c); if (i2c_pxa_is_slavemode(i2c)) { if (isr & ISR_ITE) i2c_pxa_slave_txempty(i2c, isr); if (isr & ISR_IRF) i2c_pxa_slave_rxfull(i2c, isr); } else if (i2c->msg) { if (isr & ISR_ITE) i2c_pxa_irq_txempty(i2c, isr); if (isr & ISR_IRF) i2c_pxa_irq_rxfull(i2c, isr); } else { i2c_pxa_scream_blue_murder(i2c, "spurious irq"); } return IRQ_HANDLED; } static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) { struct pxa_i2c *i2c = adap->algo_data; int ret, i; /* If the I2C controller is disabled we need to reset it (probably due to a suspend/resume destroying state). We do this here as we can then avoid worrying about resuming the controller before its users. */ if (!(readl(_ICR(i2c)) & ICR_IUE)) i2c_pxa_reset(i2c); for (i = adap->retries; i >= 0; i--) { ret = i2c_pxa_do_xfer(i2c, msgs, num); if (ret != I2C_RETRY) goto out; if (i2c_debug) dev_dbg(&adap->dev, "Retrying transmission\n"); udelay(100); } i2c_pxa_scream_blue_murder(i2c, "exhausted retries"); ret = -EREMOTEIO; out: i2c_pxa_set_slave(i2c, ret); return ret; } static u32 i2c_pxa_functionality(struct i2c_adapter *adap) { return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; } static const struct i2c_algorithm i2c_pxa_algorithm = { .master_xfer = i2c_pxa_xfer, .functionality = i2c_pxa_functionality, }; static const struct i2c_algorithm i2c_pxa_pio_algorithm = { .master_xfer = i2c_pxa_pio_xfer, .functionality = i2c_pxa_functionality, }; #define res_len(r) ((r)->end - (r)->start + 1) static int i2c_pxa_probe(struct platform_device *dev) { struct pxa_i2c *i2c; struct resource *res; struct i2c_pxa_platform_data *plat = dev->dev.platform_data; int ret; int irq; res = platform_get_resource(dev, IORESOURCE_MEM, 0); irq = platform_get_irq(dev, 0); if (res == NULL || irq < 0) return -ENODEV; if (!request_mem_region(res->start, res_len(res), res->name)) return -ENOMEM; i2c = kzalloc(sizeof(struct pxa_i2c), GFP_KERNEL); if (!i2c) { ret = -ENOMEM; goto emalloc; } i2c->adap.owner = THIS_MODULE; i2c->adap.retries = 5; spin_lock_init(&i2c->lock); init_waitqueue_head(&i2c->wait); /* * If "dev->id" is negative we consider it as zero. * The reason to do so is to avoid sysfs names that only make * sense when there are multiple adapters. */ i2c->adap.nr = dev->id != -1 ? dev->id : 0; snprintf(i2c->adap.name, sizeof(i2c->adap.name), "pxa_i2c-i2c.%u", i2c->adap.nr); i2c->clk = clk_get(&dev->dev, "I2CCLK"); if (IS_ERR(i2c->clk)) { ret = PTR_ERR(i2c->clk); goto eclk; } i2c->reg_base = ioremap(res->start, res_len(res)); if (!i2c->reg_base) { ret = -EIO; goto eremap; } i2c->iobase = res->start; i2c->iosize = res_len(res); i2c->irq = irq; i2c->slave_addr = I2C_PXA_SLAVE_ADDR; #ifdef CONFIG_I2C_PXA_SLAVE if (plat) { i2c->slave_addr = plat->slave_addr; i2c->slave = plat->slave; } #endif clk_enable(i2c->clk); if (plat) { i2c->adap.class = plat->class; i2c->use_pio = plat->use_pio; } if (i2c->use_pio) { i2c->adap.algo = &i2c_pxa_pio_algorithm; } else { i2c->adap.algo = &i2c_pxa_algorithm; ret = request_irq(irq, i2c_pxa_handler, IRQF_DISABLED, i2c->adap.name, i2c); if (ret) goto ereqirq; } i2c_pxa_reset(i2c); i2c->adap.algo_data = i2c; i2c->adap.dev.parent = &dev->dev; ret = i2c_add_numbered_adapter(&i2c->adap); if (ret < 0) { printk(KERN_INFO "I2C: Failed to add bus\n"); goto eadapt; } platform_set_drvdata(dev, i2c); #ifdef CONFIG_I2C_PXA_SLAVE printk(KERN_INFO "I2C: %s: PXA I2C adapter, slave address %d\n", i2c->adap.dev.bus_id, i2c->slave_addr); #else printk(KERN_INFO "I2C: %s: PXA I2C adapter\n", i2c->adap.dev.bus_id); #endif return 0; eadapt: if (!i2c->use_pio) free_irq(irq, i2c); ereqirq: clk_disable(i2c->clk); iounmap(i2c->reg_base); eremap: clk_put(i2c->clk); eclk: kfree(i2c); emalloc: release_mem_region(res->start, res_len(res)); return ret; } static int __exit i2c_pxa_remove(struct platform_device *dev) { struct pxa_i2c *i2c = platform_get_drvdata(dev); platform_set_drvdata(dev, NULL); i2c_del_adapter(&i2c->adap); if (!i2c->use_pio) free_irq(i2c->irq, i2c); clk_disable(i2c->clk); clk_put(i2c->clk); iounmap(i2c->reg_base); release_mem_region(i2c->iobase, i2c->iosize); kfree(i2c); return 0; } static struct platform_driver i2c_pxa_driver = { .probe = i2c_pxa_probe, .remove = __exit_p(i2c_pxa_remove), .driver = { .name = "pxa2xx-i2c", .owner = THIS_MODULE, }, }; static int __init i2c_adap_pxa_init(void) { return platform_driver_register(&i2c_pxa_driver); } static void __exit i2c_adap_pxa_exit(void) { platform_driver_unregister(&i2c_pxa_driver); } MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:pxa2xx-i2c"); module_init(i2c_adap_pxa_init); module_exit(i2c_adap_pxa_exit);