/* * drivers/i2c/busses/i2c-ibm_iic.c * * Support for the IIC peripheral on IBM PPC 4xx * * Copyright (c) 2003, 2004 Zultys Technologies. * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> * * Based on original work by * Ian DaSilva <idasilva@mvista.com> * Armin Kuster <akuster@mvista.com> * Matt Porter <mporter@mvista.com> * * Copyright 2000-2003 MontaVista Software Inc. * * Original driver version was highly leveraged from i2c-elektor.c * * Copyright 1995-97 Simon G. Vogl * 1998-99 Hans Berglund * * With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> * and even Frodo Looijaard <frodol@dds.nl> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * */ #include <linux/module.h> #include <linux/kernel.h> #include <linux/ioport.h> #include <linux/delay.h> #include <linux/slab.h> #include <linux/init.h> #include <linux/interrupt.h> #include <asm/irq.h> #include <asm/io.h> #include <linux/i2c.h> #include <linux/i2c-id.h> #include <asm/ocp.h> #include <asm/ibm4xx.h> #include "i2c-ibm_iic.h" #define DRIVER_VERSION "2.1" MODULE_DESCRIPTION("IBM IIC driver v" DRIVER_VERSION); MODULE_LICENSE("GPL"); static int iic_force_poll; module_param(iic_force_poll, bool, 0); MODULE_PARM_DESC(iic_force_poll, "Force polling mode"); static int iic_force_fast; module_param(iic_force_fast, bool, 0); MODULE_PARM_DESC(iic_fast_poll, "Force fast mode (400 kHz)"); #define DBG_LEVEL 0 #ifdef DBG #undef DBG #endif #ifdef DBG2 #undef DBG2 #endif #if DBG_LEVEL > 0 # define DBG(f,x...) printk(KERN_DEBUG "ibm-iic" f, ##x) #else # define DBG(f,x...) ((void)0) #endif #if DBG_LEVEL > 1 # define DBG2(f,x...) DBG(f, ##x) #else # define DBG2(f,x...) ((void)0) #endif #if DBG_LEVEL > 2 static void dump_iic_regs(const char* header, struct ibm_iic_private* dev) { volatile struct iic_regs __iomem *iic = dev->vaddr; printk(KERN_DEBUG "ibm-iic%d: %s\n", dev->idx, header); printk(KERN_DEBUG " cntl = 0x%02x, mdcntl = 0x%02x\n" KERN_DEBUG " sts = 0x%02x, extsts = 0x%02x\n" KERN_DEBUG " clkdiv = 0x%02x, xfrcnt = 0x%02x\n" KERN_DEBUG " xtcntlss = 0x%02x, directcntl = 0x%02x\n", in_8(&iic->cntl), in_8(&iic->mdcntl), in_8(&iic->sts), in_8(&iic->extsts), in_8(&iic->clkdiv), in_8(&iic->xfrcnt), in_8(&iic->xtcntlss), in_8(&iic->directcntl)); } # define DUMP_REGS(h,dev) dump_iic_regs((h),(dev)) #else # define DUMP_REGS(h,dev) ((void)0) #endif /* Bus timings (in ns) for bit-banging */ static struct i2c_timings { unsigned int hd_sta; unsigned int su_sto; unsigned int low; unsigned int high; unsigned int buf; } timings [] = { /* Standard mode (100 KHz) */ { .hd_sta = 4000, .su_sto = 4000, .low = 4700, .high = 4000, .buf = 4700, }, /* Fast mode (400 KHz) */ { .hd_sta = 600, .su_sto = 600, .low = 1300, .high = 600, .buf = 1300, }}; /* Enable/disable interrupt generation */ static inline void iic_interrupt_mode(struct ibm_iic_private* dev, int enable) { out_8(&dev->vaddr->intmsk, enable ? INTRMSK_EIMTC : 0); } /* * Initialize IIC interface. */ static void iic_dev_init(struct ibm_iic_private* dev) { volatile struct iic_regs __iomem *iic = dev->vaddr; DBG("%d: init\n", dev->idx); /* Clear master address */ out_8(&iic->lmadr, 0); out_8(&iic->hmadr, 0); /* Clear slave address */ out_8(&iic->lsadr, 0); out_8(&iic->hsadr, 0); /* Clear status & extended status */ out_8(&iic->sts, STS_SCMP | STS_IRQA); out_8(&iic->extsts, EXTSTS_IRQP | EXTSTS_IRQD | EXTSTS_LA | EXTSTS_ICT | EXTSTS_XFRA); /* Set clock divider */ out_8(&iic->clkdiv, dev->clckdiv); /* Clear transfer count */ out_8(&iic->xfrcnt, 0); /* Clear extended control and status */ out_8(&iic->xtcntlss, XTCNTLSS_SRC | XTCNTLSS_SRS | XTCNTLSS_SWC | XTCNTLSS_SWS); /* Clear control register */ out_8(&iic->cntl, 0); /* Enable interrupts if possible */ iic_interrupt_mode(dev, dev->irq >= 0); /* Set mode control */ out_8(&iic->mdcntl, MDCNTL_FMDB | MDCNTL_EINT | MDCNTL_EUBS | (dev->fast_mode ? MDCNTL_FSM : 0)); DUMP_REGS("iic_init", dev); } /* * Reset IIC interface */ static void iic_dev_reset(struct ibm_iic_private* dev) { volatile struct iic_regs __iomem *iic = dev->vaddr; int i; u8 dc; DBG("%d: soft reset\n", dev->idx); DUMP_REGS("reset", dev); /* Place chip in the reset state */ out_8(&iic->xtcntlss, XTCNTLSS_SRST); /* Check if bus is free */ dc = in_8(&iic->directcntl); if (!DIRCTNL_FREE(dc)){ DBG("%d: trying to regain bus control\n", dev->idx); /* Try to set bus free state */ out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC); /* Wait until we regain bus control */ for (i = 0; i < 100; ++i){ dc = in_8(&iic->directcntl); if (DIRCTNL_FREE(dc)) break; /* Toggle SCL line */ dc ^= DIRCNTL_SCC; out_8(&iic->directcntl, dc); udelay(10); dc ^= DIRCNTL_SCC; out_8(&iic->directcntl, dc); /* be nice */ cond_resched(); } } /* Remove reset */ out_8(&iic->xtcntlss, 0); /* Reinitialize interface */ iic_dev_init(dev); } /* * Do 0-length transaction using bit-banging through IIC_DIRECTCNTL register. */ /* Wait for SCL and/or SDA to be high */ static int iic_dc_wait(volatile struct iic_regs __iomem *iic, u8 mask) { unsigned long x = jiffies + HZ / 28 + 2; while ((in_8(&iic->directcntl) & mask) != mask){ if (unlikely(time_after(jiffies, x))) return -1; cond_resched(); } return 0; } static int iic_smbus_quick(struct ibm_iic_private* dev, const struct i2c_msg* p) { volatile struct iic_regs __iomem *iic = dev->vaddr; const struct i2c_timings* t = &timings[dev->fast_mode ? 1 : 0]; u8 mask, v, sda; int i, res; /* Only 7-bit addresses are supported */ if (unlikely(p->flags & I2C_M_TEN)){ DBG("%d: smbus_quick - 10 bit addresses are not supported\n", dev->idx); return -EINVAL; } DBG("%d: smbus_quick(0x%02x)\n", dev->idx, p->addr); /* Reset IIC interface */ out_8(&iic->xtcntlss, XTCNTLSS_SRST); /* Wait for bus to become free */ out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC); if (unlikely(iic_dc_wait(iic, DIRCNTL_MSDA | DIRCNTL_MSC))) goto err; ndelay(t->buf); /* START */ out_8(&iic->directcntl, DIRCNTL_SCC); sda = 0; ndelay(t->hd_sta); /* Send address */ v = (u8)((p->addr << 1) | ((p->flags & I2C_M_RD) ? 1 : 0)); for (i = 0, mask = 0x80; i < 8; ++i, mask >>= 1){ out_8(&iic->directcntl, sda); ndelay(t->low / 2); sda = (v & mask) ? DIRCNTL_SDAC : 0; out_8(&iic->directcntl, sda); ndelay(t->low / 2); out_8(&iic->directcntl, DIRCNTL_SCC | sda); if (unlikely(iic_dc_wait(iic, DIRCNTL_MSC))) goto err; ndelay(t->high); } /* ACK */ out_8(&iic->directcntl, sda); ndelay(t->low / 2); out_8(&iic->directcntl, DIRCNTL_SDAC); ndelay(t->low / 2); out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC); if (unlikely(iic_dc_wait(iic, DIRCNTL_MSC))) goto err; res = (in_8(&iic->directcntl) & DIRCNTL_MSDA) ? -EREMOTEIO : 1; ndelay(t->high); /* STOP */ out_8(&iic->directcntl, 0); ndelay(t->low); out_8(&iic->directcntl, DIRCNTL_SCC); if (unlikely(iic_dc_wait(iic, DIRCNTL_MSC))) goto err; ndelay(t->su_sto); out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC); ndelay(t->buf); DBG("%d: smbus_quick -> %s\n", dev->idx, res ? "NACK" : "ACK"); out: /* Remove reset */ out_8(&iic->xtcntlss, 0); /* Reinitialize interface */ iic_dev_init(dev); return res; err: DBG("%d: smbus_quick - bus is stuck\n", dev->idx); res = -EREMOTEIO; goto out; } /* * IIC interrupt handler */ static irqreturn_t iic_handler(int irq, void *dev_id) { struct ibm_iic_private* dev = (struct ibm_iic_private*)dev_id; volatile struct iic_regs __iomem *iic = dev->vaddr; DBG2("%d: irq handler, STS = 0x%02x, EXTSTS = 0x%02x\n", dev->idx, in_8(&iic->sts), in_8(&iic->extsts)); /* Acknowledge IRQ and wakeup iic_wait_for_tc */ out_8(&iic->sts, STS_IRQA | STS_SCMP); wake_up_interruptible(&dev->wq); return IRQ_HANDLED; } /* * Get master transfer result and clear errors if any. * Returns the number of actually transferred bytes or error (<0) */ static int iic_xfer_result(struct ibm_iic_private* dev) { volatile struct iic_regs __iomem *iic = dev->vaddr; if (unlikely(in_8(&iic->sts) & STS_ERR)){ DBG("%d: xfer error, EXTSTS = 0x%02x\n", dev->idx, in_8(&iic->extsts)); /* Clear errors and possible pending IRQs */ out_8(&iic->extsts, EXTSTS_IRQP | EXTSTS_IRQD | EXTSTS_LA | EXTSTS_ICT | EXTSTS_XFRA); /* Flush master data buffer */ out_8(&iic->mdcntl, in_8(&iic->mdcntl) | MDCNTL_FMDB); /* Is bus free? * If error happened during combined xfer * IIC interface is usually stuck in some strange * state, the only way out - soft reset. */ if ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){ DBG("%d: bus is stuck, resetting\n", dev->idx); iic_dev_reset(dev); } return -EREMOTEIO; } else return in_8(&iic->xfrcnt) & XFRCNT_MTC_MASK; } /* * Try to abort active transfer. */ static void iic_abort_xfer(struct ibm_iic_private* dev) { volatile struct iic_regs __iomem *iic = dev->vaddr; unsigned long x; DBG("%d: iic_abort_xfer\n", dev->idx); out_8(&iic->cntl, CNTL_HMT); /* * Wait for the abort command to complete. * It's not worth to be optimized, just poll (timeout >= 1 tick) */ x = jiffies + 2; while ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){ if (time_after(jiffies, x)){ DBG("%d: abort timeout, resetting...\n", dev->idx); iic_dev_reset(dev); return; } schedule(); } /* Just to clear errors */ iic_xfer_result(dev); } /* * Wait for master transfer to complete. * It puts current process to sleep until we get interrupt or timeout expires. * Returns the number of transferred bytes or error (<0) */ static int iic_wait_for_tc(struct ibm_iic_private* dev){ volatile struct iic_regs __iomem *iic = dev->vaddr; int ret = 0; if (dev->irq >= 0){ /* Interrupt mode */ ret = wait_event_interruptible_timeout(dev->wq, !(in_8(&iic->sts) & STS_PT), dev->adap.timeout * HZ); if (unlikely(ret < 0)) DBG("%d: wait interrupted\n", dev->idx); else if (unlikely(in_8(&iic->sts) & STS_PT)){ DBG("%d: wait timeout\n", dev->idx); ret = -ETIMEDOUT; } } else { /* Polling mode */ unsigned long x = jiffies + dev->adap.timeout * HZ; while (in_8(&iic->sts) & STS_PT){ if (unlikely(time_after(jiffies, x))){ DBG("%d: poll timeout\n", dev->idx); ret = -ETIMEDOUT; break; } if (unlikely(signal_pending(current))){ DBG("%d: poll interrupted\n", dev->idx); ret = -ERESTARTSYS; break; } schedule(); } } if (unlikely(ret < 0)) iic_abort_xfer(dev); else ret = iic_xfer_result(dev); DBG2("%d: iic_wait_for_tc -> %d\n", dev->idx, ret); return ret; } /* * Low level master transfer routine */ static int iic_xfer_bytes(struct ibm_iic_private* dev, struct i2c_msg* pm, int combined_xfer) { volatile struct iic_regs __iomem *iic = dev->vaddr; char* buf = pm->buf; int i, j, loops, ret = 0; int len = pm->len; u8 cntl = (in_8(&iic->cntl) & CNTL_AMD) | CNTL_PT; if (pm->flags & I2C_M_RD) cntl |= CNTL_RW; loops = (len + 3) / 4; for (i = 0; i < loops; ++i, len -= 4){ int count = len > 4 ? 4 : len; u8 cmd = cntl | ((count - 1) << CNTL_TCT_SHIFT); if (!(cntl & CNTL_RW)) for (j = 0; j < count; ++j) out_8((void __iomem *)&iic->mdbuf, *buf++); if (i < loops - 1) cmd |= CNTL_CHT; else if (combined_xfer) cmd |= CNTL_RPST; DBG2("%d: xfer_bytes, %d, CNTL = 0x%02x\n", dev->idx, count, cmd); /* Start transfer */ out_8(&iic->cntl, cmd); /* Wait for completion */ ret = iic_wait_for_tc(dev); if (unlikely(ret < 0)) break; else if (unlikely(ret != count)){ DBG("%d: xfer_bytes, requested %d, transfered %d\n", dev->idx, count, ret); /* If it's not a last part of xfer, abort it */ if (combined_xfer || (i < loops - 1)) iic_abort_xfer(dev); ret = -EREMOTEIO; break; } if (cntl & CNTL_RW) for (j = 0; j < count; ++j) *buf++ = in_8((void __iomem *)&iic->mdbuf); } return ret > 0 ? 0 : ret; } /* * Set target slave address for master transfer */ static inline void iic_address(struct ibm_iic_private* dev, struct i2c_msg* msg) { volatile struct iic_regs __iomem *iic = dev->vaddr; u16 addr = msg->addr; DBG2("%d: iic_address, 0x%03x (%d-bit)\n", dev->idx, addr, msg->flags & I2C_M_TEN ? 10 : 7); if (msg->flags & I2C_M_TEN){ out_8(&iic->cntl, CNTL_AMD); out_8(&iic->lmadr, addr); out_8(&iic->hmadr, 0xf0 | ((addr >> 7) & 0x06)); } else { out_8(&iic->cntl, 0); out_8(&iic->lmadr, addr << 1); } } static inline int iic_invalid_address(const struct i2c_msg* p) { return (p->addr > 0x3ff) || (!(p->flags & I2C_M_TEN) && (p->addr > 0x7f)); } static inline int iic_address_neq(const struct i2c_msg* p1, const struct i2c_msg* p2) { return (p1->addr != p2->addr) || ((p1->flags & I2C_M_TEN) != (p2->flags & I2C_M_TEN)); } /* * Generic master transfer entrypoint. * Returns the number of processed messages or error (<0) */ static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) { struct ibm_iic_private* dev = (struct ibm_iic_private*)(i2c_get_adapdata(adap)); volatile struct iic_regs __iomem *iic = dev->vaddr; int i, ret = 0; DBG2("%d: iic_xfer, %d msg(s)\n", dev->idx, num); if (!num) return 0; /* Check the sanity of the passed messages. * Uhh, generic i2c layer is more suitable place for such code... */ if (unlikely(iic_invalid_address(&msgs[0]))){ DBG("%d: invalid address 0x%03x (%d-bit)\n", dev->idx, msgs[0].addr, msgs[0].flags & I2C_M_TEN ? 10 : 7); return -EINVAL; } for (i = 0; i < num; ++i){ if (unlikely(msgs[i].len <= 0)){ if (num == 1 && !msgs[0].len){ /* Special case for I2C_SMBUS_QUICK emulation. * IBM IIC doesn't support 0-length transactions * so we have to emulate them using bit-banging. */ return iic_smbus_quick(dev, &msgs[0]); } DBG("%d: invalid len %d in msg[%d]\n", dev->idx, msgs[i].len, i); return -EINVAL; } if (unlikely(iic_address_neq(&msgs[0], &msgs[i]))){ DBG("%d: invalid addr in msg[%d]\n", dev->idx, i); return -EINVAL; } } /* Check bus state */ if (unlikely((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE)){ DBG("%d: iic_xfer, bus is not free\n", dev->idx); /* Usually it means something serious has happend. * We *cannot* have unfinished previous transfer * so it doesn't make any sense to try to stop it. * Probably we were not able to recover from the * previous error. * The only *reasonable* thing I can think of here * is soft reset. --ebs */ iic_dev_reset(dev); if ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){ DBG("%d: iic_xfer, bus is still not free\n", dev->idx); return -EREMOTEIO; } } else { /* Flush master data buffer (just in case) */ out_8(&iic->mdcntl, in_8(&iic->mdcntl) | MDCNTL_FMDB); } /* Load slave address */ iic_address(dev, &msgs[0]); /* Do real transfer */ for (i = 0; i < num && !ret; ++i) ret = iic_xfer_bytes(dev, &msgs[i], i < num - 1); return ret < 0 ? ret : num; } static u32 iic_func(struct i2c_adapter *adap) { return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR; } static const struct i2c_algorithm iic_algo = { .master_xfer = iic_xfer, .functionality = iic_func }; /* * Calculates IICx_CLCKDIV value for a specific OPB clock frequency */ static inline u8 iic_clckdiv(unsigned int opb) { /* Compatibility kludge, should go away after all cards * are fixed to fill correct value for opbfreq. * Previous driver version used hardcoded divider value 4, * it corresponds to OPB frequency from the range (40, 50] MHz */ if (!opb){ printk(KERN_WARNING "ibm-iic: using compatibility value for OPB freq," " fix your board specific setup\n"); opb = 50000000; } /* Convert to MHz */ opb /= 1000000; if (opb < 20 || opb > 150){ printk(KERN_CRIT "ibm-iic: invalid OPB clock frequency %u MHz\n", opb); opb = opb < 20 ? 20 : 150; } return (u8)((opb + 9) / 10 - 1); } /* * Register single IIC interface */ static int __devinit iic_probe(struct ocp_device *ocp){ struct ibm_iic_private* dev; struct i2c_adapter* adap; struct ocp_func_iic_data* iic_data = ocp->def->additions; int ret; if (!iic_data) printk(KERN_WARNING"ibm-iic%d: missing additional data!\n", ocp->def->index); if (!(dev = kzalloc(sizeof(*dev), GFP_KERNEL))) { printk(KERN_CRIT "ibm-iic%d: failed to allocate device data\n", ocp->def->index); return -ENOMEM; } dev->idx = ocp->def->index; ocp_set_drvdata(ocp, dev); if (!request_mem_region(ocp->def->paddr, sizeof(struct iic_regs), "ibm_iic")) { ret = -EBUSY; goto fail1; } if (!(dev->vaddr = ioremap(ocp->def->paddr, sizeof(struct iic_regs)))){ printk(KERN_CRIT "ibm-iic%d: failed to ioremap device registers\n", dev->idx); ret = -ENXIO; goto fail2; } init_waitqueue_head(&dev->wq); dev->irq = iic_force_poll ? -1 : ocp->def->irq; if (dev->irq >= 0){ /* Disable interrupts until we finish initialization, assumes level-sensitive IRQ setup... */ iic_interrupt_mode(dev, 0); if (request_irq(dev->irq, iic_handler, 0, "IBM IIC", dev)){ printk(KERN_ERR "ibm-iic%d: request_irq %d failed\n", dev->idx, dev->irq); /* Fallback to the polling mode */ dev->irq = -1; } } if (dev->irq < 0) printk(KERN_WARNING "ibm-iic%d: using polling mode\n", dev->idx); /* Board specific settings */ dev->fast_mode = iic_force_fast ? 1 : (iic_data ? iic_data->fast_mode : 0); /* clckdiv is the same for *all* IIC interfaces, * but I'd rather make a copy than introduce another global. --ebs */ dev->clckdiv = iic_clckdiv(ocp_sys_info.opb_bus_freq); DBG("%d: clckdiv = %d\n", dev->idx, dev->clckdiv); /* Initialize IIC interface */ iic_dev_init(dev); /* Register it with i2c layer */ adap = &dev->adap; adap->dev.parent = &ocp->dev; strcpy(adap->name, "IBM IIC"); i2c_set_adapdata(adap, dev); adap->id = I2C_HW_OCP; adap->class = I2C_CLASS_HWMON; adap->algo = &iic_algo; adap->client_register = NULL; adap->client_unregister = NULL; adap->timeout = 1; adap->retries = 1; /* * If "dev->idx" is negative we consider it as zero. * The reason to do so is to avoid sysfs names that only make * sense when there are multiple adapters. */ adap->nr = dev->idx >= 0 ? dev->idx : 0; if ((ret = i2c_add_numbered_adapter(adap)) < 0) { printk(KERN_CRIT "ibm-iic%d: failed to register i2c adapter\n", dev->idx); goto fail; } printk(KERN_INFO "ibm-iic%d: using %s mode\n", dev->idx, dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)"); return 0; fail: if (dev->irq >= 0){ iic_interrupt_mode(dev, 0); free_irq(dev->irq, dev); } iounmap(dev->vaddr); fail2: release_mem_region(ocp->def->paddr, sizeof(struct iic_regs)); fail1: ocp_set_drvdata(ocp, NULL); kfree(dev); return ret; } /* * Cleanup initialized IIC interface */ static void __devexit iic_remove(struct ocp_device *ocp) { struct ibm_iic_private* dev = (struct ibm_iic_private*)ocp_get_drvdata(ocp); BUG_ON(dev == NULL); if (i2c_del_adapter(&dev->adap)){ printk(KERN_CRIT "ibm-iic%d: failed to delete i2c adapter :(\n", dev->idx); /* That's *very* bad, just shutdown IRQ ... */ if (dev->irq >= 0){ iic_interrupt_mode(dev, 0); free_irq(dev->irq, dev); dev->irq = -1; } } else { if (dev->irq >= 0){ iic_interrupt_mode(dev, 0); free_irq(dev->irq, dev); } iounmap(dev->vaddr); release_mem_region(ocp->def->paddr, sizeof(struct iic_regs)); kfree(dev); } } static struct ocp_device_id ibm_iic_ids[] __devinitdata = { { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_IIC }, { .vendor = OCP_VENDOR_INVALID } }; MODULE_DEVICE_TABLE(ocp, ibm_iic_ids); static struct ocp_driver ibm_iic_driver = { .name = "iic", .id_table = ibm_iic_ids, .probe = iic_probe, .remove = __devexit_p(iic_remove), #if defined(CONFIG_PM) .suspend = NULL, .resume = NULL, #endif }; static int __init iic_init(void) { printk(KERN_INFO "IBM IIC driver v" DRIVER_VERSION "\n"); return ocp_register_driver(&ibm_iic_driver); } static void __exit iic_exit(void) { ocp_unregister_driver(&ibm_iic_driver); } module_init(iic_init); module_exit(iic_exit);