/* fscpos.c - Kernel module for hardware monitoring with FSC Poseidon chips Copyright (C) 2004, 2005 Stefan Ott <stefan@desire.ch> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* fujitsu siemens poseidon chip, module based on the old fscpos module by Hermann Jung <hej@odn.de> and the fscher module by Reinhard Nissl <rnissl@gmx.de> original module based on lm80.c Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and Philip Edelbrock <phil@netroedge.com> Thanks to Jean Delvare for reviewing my code and suggesting a lot of improvements. */ #include <linux/module.h> #include <linux/slab.h> #include <linux/jiffies.h> #include <linux/i2c.h> #include <linux/init.h> #include <linux/hwmon.h> #include <linux/err.h> #include <linux/mutex.h> #include <linux/sysfs.h> /* * Addresses to scan */ static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; /* * Insmod parameters */ I2C_CLIENT_INSMOD_1(fscpos); /* * The FSCPOS registers */ /* chip identification */ #define FSCPOS_REG_IDENT_0 0x00 #define FSCPOS_REG_IDENT_1 0x01 #define FSCPOS_REG_IDENT_2 0x02 #define FSCPOS_REG_REVISION 0x03 /* global control and status */ #define FSCPOS_REG_EVENT_STATE 0x04 #define FSCPOS_REG_CONTROL 0x05 /* watchdog */ #define FSCPOS_REG_WDOG_PRESET 0x28 #define FSCPOS_REG_WDOG_STATE 0x23 #define FSCPOS_REG_WDOG_CONTROL 0x21 /* voltages */ #define FSCPOS_REG_VOLT_12 0x45 #define FSCPOS_REG_VOLT_5 0x42 #define FSCPOS_REG_VOLT_BATT 0x48 /* fans - the chip does not support minimum speed for fan2 */ static u8 FSCPOS_REG_PWM[] = { 0x55, 0x65 }; static u8 FSCPOS_REG_FAN_ACT[] = { 0x0e, 0x6b, 0xab }; static u8 FSCPOS_REG_FAN_STATE[] = { 0x0d, 0x62, 0xa2 }; static u8 FSCPOS_REG_FAN_RIPPLE[] = { 0x0f, 0x6f, 0xaf }; /* temperatures */ static u8 FSCPOS_REG_TEMP_ACT[] = { 0x64, 0x32, 0x35 }; static u8 FSCPOS_REG_TEMP_STATE[] = { 0x71, 0x81, 0x91 }; /* * Functions declaration */ static int fscpos_attach_adapter(struct i2c_adapter *adapter); static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind); static int fscpos_detach_client(struct i2c_client *client); static int fscpos_read_value(struct i2c_client *client, u8 reg); static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value); static struct fscpos_data *fscpos_update_device(struct device *dev); static void fscpos_init_client(struct i2c_client *client); static void reset_fan_alarm(struct i2c_client *client, int nr); /* * Driver data (common to all clients) */ static struct i2c_driver fscpos_driver = { .driver = { .name = "fscpos", }, .id = I2C_DRIVERID_FSCPOS, .attach_adapter = fscpos_attach_adapter, .detach_client = fscpos_detach_client, }; /* * Client data (each client gets its own) */ struct fscpos_data { struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* 0 until following fields are valid */ unsigned long last_updated; /* In jiffies */ /* register values */ u8 revision; /* revision of chip */ u8 global_event; /* global event status */ u8 global_control; /* global control register */ u8 wdog_control; /* watchdog control */ u8 wdog_state; /* watchdog status */ u8 wdog_preset; /* watchdog preset */ u8 volt[3]; /* 12, 5, battery current */ u8 temp_act[3]; /* temperature */ u8 temp_status[3]; /* status of sensor */ u8 fan_act[3]; /* fans revolutions per second */ u8 fan_status[3]; /* fan status */ u8 pwm[2]; /* fan min value for rps */ u8 fan_ripple[3]; /* divider for rps */ }; /* Temperature */ #define TEMP_FROM_REG(val) (((val) - 128) * 1000) static ssize_t show_temp_input(struct fscpos_data *data, char *buf, int nr) { return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[nr - 1])); } static ssize_t show_temp_status(struct fscpos_data *data, char *buf, int nr) { /* bits 2..7 reserved => mask with 0x03 */ return sprintf(buf, "%u\n", data->temp_status[nr - 1] & 0x03); } static ssize_t show_temp_reset(struct fscpos_data *data, char *buf, int nr) { return sprintf(buf, "1\n"); } static ssize_t set_temp_reset(struct i2c_client *client, struct fscpos_data *data, const char *buf, size_t count, int nr, int reg) { unsigned long v = simple_strtoul(buf, NULL, 10); if (v != 1) { dev_err(&client->dev, "temp_reset value %ld not supported. " "Use 1 to reset the alarm!\n", v); return -EINVAL; } dev_info(&client->dev, "You used the temp_reset feature which has not " "been proplerly tested. Please report your " "experience to the module author.\n"); /* Supported value: 2 (clears the status) */ fscpos_write_value(client, FSCPOS_REG_TEMP_STATE[nr - 1], 2); return count; } /* Fans */ #define RPM_FROM_REG(val) ((val) * 60) static ssize_t show_fan_status(struct fscpos_data *data, char *buf, int nr) { /* bits 0..1, 3..7 reserved => mask with 0x04 */ return sprintf(buf, "%u\n", data->fan_status[nr - 1] & 0x04); } static ssize_t show_fan_input(struct fscpos_data *data, char *buf, int nr) { return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[nr - 1])); } static ssize_t show_fan_ripple(struct fscpos_data *data, char *buf, int nr) { /* bits 2..7 reserved => mask with 0x03 */ return sprintf(buf, "%u\n", data->fan_ripple[nr - 1] & 0x03); } static ssize_t set_fan_ripple(struct i2c_client *client, struct fscpos_data *data, const char *buf, size_t count, int nr, int reg) { /* supported values: 2, 4, 8 */ unsigned long v = simple_strtoul(buf, NULL, 10); switch (v) { case 2: v = 1; break; case 4: v = 2; break; case 8: v = 3; break; default: dev_err(&client->dev, "fan_ripple value %ld not supported. " "Must be one of 2, 4 or 8!\n", v); return -EINVAL; } mutex_lock(&data->update_lock); /* bits 2..7 reserved => mask with 0x03 */ data->fan_ripple[nr - 1] &= ~0x03; data->fan_ripple[nr - 1] |= v; fscpos_write_value(client, reg, data->fan_ripple[nr - 1]); mutex_unlock(&data->update_lock); return count; } static ssize_t show_pwm(struct fscpos_data *data, char *buf, int nr) { return sprintf(buf, "%u\n", data->pwm[nr - 1]); } static ssize_t set_pwm(struct i2c_client *client, struct fscpos_data *data, const char *buf, size_t count, int nr, int reg) { unsigned long v = simple_strtoul(buf, NULL, 10); /* Range: 0..255 */ if (v < 0) v = 0; if (v > 255) v = 255; mutex_lock(&data->update_lock); data->pwm[nr - 1] = v; fscpos_write_value(client, reg, data->pwm[nr - 1]); mutex_unlock(&data->update_lock); return count; } static void reset_fan_alarm(struct i2c_client *client, int nr) { fscpos_write_value(client, FSCPOS_REG_FAN_STATE[nr], 4); } /* Volts */ #define VOLT_FROM_REG(val, mult) ((val) * (mult) / 255) static ssize_t show_volt_12(struct device *dev, struct device_attribute *attr, char *buf) { struct fscpos_data *data = fscpos_update_device(dev); return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[0], 14200)); } static ssize_t show_volt_5(struct device *dev, struct device_attribute *attr, char *buf) { struct fscpos_data *data = fscpos_update_device(dev); return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[1], 6600)); } static ssize_t show_volt_batt(struct device *dev, struct device_attribute *attr, char *buf) { struct fscpos_data *data = fscpos_update_device(dev); return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[2], 3300)); } /* Watchdog */ static ssize_t show_wdog_control(struct fscpos_data *data, char *buf) { /* bits 0..3 reserved, bit 6 write only => mask with 0xb0 */ return sprintf(buf, "%u\n", data->wdog_control & 0xb0); } static ssize_t set_wdog_control(struct i2c_client *client, struct fscpos_data *data, const char *buf, size_t count, int reg) { /* bits 0..3 reserved => mask with 0xf0 */ unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0; mutex_lock(&data->update_lock); data->wdog_control &= ~0xf0; data->wdog_control |= v; fscpos_write_value(client, reg, data->wdog_control); mutex_unlock(&data->update_lock); return count; } static ssize_t show_wdog_state(struct fscpos_data *data, char *buf) { /* bits 0, 2..7 reserved => mask with 0x02 */ return sprintf(buf, "%u\n", data->wdog_state & 0x02); } static ssize_t set_wdog_state(struct i2c_client *client, struct fscpos_data *data, const char *buf, size_t count, int reg) { unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02; /* Valid values: 2 (clear) */ if (v != 2) { dev_err(&client->dev, "wdog_state value %ld not supported. " "Must be 2 to clear the state!\n", v); return -EINVAL; } mutex_lock(&data->update_lock); data->wdog_state &= ~v; fscpos_write_value(client, reg, v); mutex_unlock(&data->update_lock); return count; } static ssize_t show_wdog_preset(struct fscpos_data *data, char *buf) { return sprintf(buf, "%u\n", data->wdog_preset); } static ssize_t set_wdog_preset(struct i2c_client *client, struct fscpos_data *data, const char *buf, size_t count, int reg) { unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff; mutex_lock(&data->update_lock); data->wdog_preset = v; fscpos_write_value(client, reg, data->wdog_preset); mutex_unlock(&data->update_lock); return count; } /* Event */ static ssize_t show_event(struct device *dev, struct device_attribute *attr, char *buf) { /* bits 5..7 reserved => mask with 0x1f */ struct fscpos_data *data = fscpos_update_device(dev); return sprintf(buf, "%u\n", data->global_event & 0x9b); } /* * Sysfs stuff */ #define create_getter(kind, sub) \ static ssize_t sysfs_show_##kind##sub(struct device *dev, struct device_attribute *attr, char *buf) \ { \ struct fscpos_data *data = fscpos_update_device(dev); \ return show_##kind##sub(data, buf); \ } #define create_getter_n(kind, offset, sub) \ static ssize_t sysfs_show_##kind##offset##sub(struct device *dev, struct device_attribute *attr, char\ *buf) \ { \ struct fscpos_data *data = fscpos_update_device(dev); \ return show_##kind##sub(data, buf, offset); \ } #define create_setter(kind, sub, reg) \ static ssize_t sysfs_set_##kind##sub (struct device *dev, struct device_attribute *attr, const char \ *buf, size_t count) \ { \ struct i2c_client *client = to_i2c_client(dev); \ struct fscpos_data *data = i2c_get_clientdata(client); \ return set_##kind##sub(client, data, buf, count, reg); \ } #define create_setter_n(kind, offset, sub, reg) \ static ssize_t sysfs_set_##kind##offset##sub (struct device *dev, struct device_attribute *attr, \ const char *buf, size_t count) \ { \ struct i2c_client *client = to_i2c_client(dev); \ struct fscpos_data *data = i2c_get_clientdata(client); \ return set_##kind##sub(client, data, buf, count, offset, reg);\ } #define create_sysfs_device_ro(kind, sub, offset) \ static DEVICE_ATTR(kind##offset##sub, S_IRUGO, \ sysfs_show_##kind##offset##sub, NULL); #define create_sysfs_device_rw(kind, sub, offset) \ static DEVICE_ATTR(kind##offset##sub, S_IRUGO | S_IWUSR, \ sysfs_show_##kind##offset##sub, sysfs_set_##kind##offset##sub); #define sysfs_ro_n(kind, sub, offset) \ create_getter_n(kind, offset, sub); \ create_sysfs_device_ro(kind, sub, offset); #define sysfs_rw_n(kind, sub, offset, reg) \ create_getter_n(kind, offset, sub); \ create_setter_n(kind, offset, sub, reg); \ create_sysfs_device_rw(kind, sub, offset); #define sysfs_rw(kind, sub, reg) \ create_getter(kind, sub); \ create_setter(kind, sub, reg); \ create_sysfs_device_rw(kind, sub,); #define sysfs_fan_with_min(offset, reg_status, reg_ripple, reg_min) \ sysfs_fan(offset, reg_status, reg_ripple); \ sysfs_rw_n(pwm,, offset, reg_min); #define sysfs_fan(offset, reg_status, reg_ripple) \ sysfs_ro_n(fan, _input, offset); \ sysfs_ro_n(fan, _status, offset); \ sysfs_rw_n(fan, _ripple, offset, reg_ripple); #define sysfs_temp(offset, reg_status) \ sysfs_ro_n(temp, _input, offset); \ sysfs_ro_n(temp, _status, offset); \ sysfs_rw_n(temp, _reset, offset, reg_status); #define sysfs_watchdog(reg_wdog_preset, reg_wdog_state, reg_wdog_control) \ sysfs_rw(wdog, _control, reg_wdog_control); \ sysfs_rw(wdog, _preset, reg_wdog_preset); \ sysfs_rw(wdog, _state, reg_wdog_state); sysfs_fan_with_min(1, FSCPOS_REG_FAN_STATE[0], FSCPOS_REG_FAN_RIPPLE[0], FSCPOS_REG_PWM[0]); sysfs_fan_with_min(2, FSCPOS_REG_FAN_STATE[1], FSCPOS_REG_FAN_RIPPLE[1], FSCPOS_REG_PWM[1]); sysfs_fan(3, FSCPOS_REG_FAN_STATE[2], FSCPOS_REG_FAN_RIPPLE[2]); sysfs_temp(1, FSCPOS_REG_TEMP_STATE[0]); sysfs_temp(2, FSCPOS_REG_TEMP_STATE[1]); sysfs_temp(3, FSCPOS_REG_TEMP_STATE[2]); sysfs_watchdog(FSCPOS_REG_WDOG_PRESET, FSCPOS_REG_WDOG_STATE, FSCPOS_REG_WDOG_CONTROL); static DEVICE_ATTR(event, S_IRUGO, show_event, NULL); static DEVICE_ATTR(in0_input, S_IRUGO, show_volt_12, NULL); static DEVICE_ATTR(in1_input, S_IRUGO, show_volt_5, NULL); static DEVICE_ATTR(in2_input, S_IRUGO, show_volt_batt, NULL); static struct attribute *fscpos_attributes[] = { &dev_attr_event.attr, &dev_attr_in0_input.attr, &dev_attr_in1_input.attr, &dev_attr_in2_input.attr, &dev_attr_wdog_control.attr, &dev_attr_wdog_preset.attr, &dev_attr_wdog_state.attr, &dev_attr_temp1_input.attr, &dev_attr_temp1_status.attr, &dev_attr_temp1_reset.attr, &dev_attr_temp2_input.attr, &dev_attr_temp2_status.attr, &dev_attr_temp2_reset.attr, &dev_attr_temp3_input.attr, &dev_attr_temp3_status.attr, &dev_attr_temp3_reset.attr, &dev_attr_fan1_input.attr, &dev_attr_fan1_status.attr, &dev_attr_fan1_ripple.attr, &dev_attr_pwm1.attr, &dev_attr_fan2_input.attr, &dev_attr_fan2_status.attr, &dev_attr_fan2_ripple.attr, &dev_attr_pwm2.attr, &dev_attr_fan3_input.attr, &dev_attr_fan3_status.attr, &dev_attr_fan3_ripple.attr, NULL }; static const struct attribute_group fscpos_group = { .attrs = fscpos_attributes, }; static int fscpos_attach_adapter(struct i2c_adapter *adapter) { if (!(adapter->class & I2C_CLASS_HWMON)) return 0; return i2c_probe(adapter, &addr_data, fscpos_detect); } static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind) { struct i2c_client *new_client; struct fscpos_data *data; int err = 0; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) goto exit; /* * OK. For now, we presume we have a valid client. We now create the * client structure, even though we cannot fill it completely yet. * But it allows us to access fscpos_{read,write}_value. */ if (!(data = kzalloc(sizeof(struct fscpos_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } new_client = &data->client; i2c_set_clientdata(new_client, data); new_client->addr = address; new_client->adapter = adapter; new_client->driver = &fscpos_driver; new_client->flags = 0; /* Do the remaining detection unless force or force_fscpos parameter */ if (kind < 0) { if ((fscpos_read_value(new_client, FSCPOS_REG_IDENT_0) != 0x50) /* 'P' */ || (fscpos_read_value(new_client, FSCPOS_REG_IDENT_1) != 0x45) /* 'E' */ || (fscpos_read_value(new_client, FSCPOS_REG_IDENT_2) != 0x47))/* 'G' */ { dev_dbg(&new_client->dev, "fscpos detection failed\n"); goto exit_free; } } /* Fill in the remaining client fields and put it in the global list */ strlcpy(new_client->name, "fscpos", I2C_NAME_SIZE); data->valid = 0; mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ if ((err = i2c_attach_client(new_client))) goto exit_free; /* Inizialize the fscpos chip */ fscpos_init_client(new_client); /* Announce that the chip was found */ dev_info(&new_client->dev, "Found fscpos chip, rev %u\n", data->revision); /* Register sysfs hooks */ if ((err = sysfs_create_group(&new_client->dev.kobj, &fscpos_group))) goto exit_detach; data->hwmon_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->hwmon_dev)) { err = PTR_ERR(data->hwmon_dev); goto exit_remove_files; } return 0; exit_remove_files: sysfs_remove_group(&new_client->dev.kobj, &fscpos_group); exit_detach: i2c_detach_client(new_client); exit_free: kfree(data); exit: return err; } static int fscpos_detach_client(struct i2c_client *client) { struct fscpos_data *data = i2c_get_clientdata(client); int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &fscpos_group); if ((err = i2c_detach_client(client))) return err; kfree(data); return 0; } static int fscpos_read_value(struct i2c_client *client, u8 reg) { dev_dbg(&client->dev, "Read reg 0x%02x\n", reg); return i2c_smbus_read_byte_data(client, reg); } static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value) { dev_dbg(&client->dev, "Write reg 0x%02x, val 0x%02x\n", reg, value); return i2c_smbus_write_byte_data(client, reg, value); } /* Called when we have found a new FSCPOS chip */ static void fscpos_init_client(struct i2c_client *client) { struct fscpos_data *data = i2c_get_clientdata(client); /* read revision from chip */ data->revision = fscpos_read_value(client, FSCPOS_REG_REVISION); } static struct fscpos_data *fscpos_update_device(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct fscpos_data *data = i2c_get_clientdata(client); mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { int i; dev_dbg(&client->dev, "Starting fscpos update\n"); for (i = 0; i < 3; i++) { data->temp_act[i] = fscpos_read_value(client, FSCPOS_REG_TEMP_ACT[i]); data->temp_status[i] = fscpos_read_value(client, FSCPOS_REG_TEMP_STATE[i]); data->fan_act[i] = fscpos_read_value(client, FSCPOS_REG_FAN_ACT[i]); data->fan_status[i] = fscpos_read_value(client, FSCPOS_REG_FAN_STATE[i]); data->fan_ripple[i] = fscpos_read_value(client, FSCPOS_REG_FAN_RIPPLE[i]); if (i < 2) { /* fan2_min is not supported by the chip */ data->pwm[i] = fscpos_read_value(client, FSCPOS_REG_PWM[i]); } /* reset fan status if speed is back to > 0 */ if (data->fan_status[i] != 0 && data->fan_act[i] > 0) { reset_fan_alarm(client, i); } } data->volt[0] = fscpos_read_value(client, FSCPOS_REG_VOLT_12); data->volt[1] = fscpos_read_value(client, FSCPOS_REG_VOLT_5); data->volt[2] = fscpos_read_value(client, FSCPOS_REG_VOLT_BATT); data->wdog_preset = fscpos_read_value(client, FSCPOS_REG_WDOG_PRESET); data->wdog_state = fscpos_read_value(client, FSCPOS_REG_WDOG_STATE); data->wdog_control = fscpos_read_value(client, FSCPOS_REG_WDOG_CONTROL); data->global_event = fscpos_read_value(client, FSCPOS_REG_EVENT_STATE); data->last_updated = jiffies; data->valid = 1; } mutex_unlock(&data->update_lock); return data; } static int __init sm_fscpos_init(void) { return i2c_add_driver(&fscpos_driver); } static void __exit sm_fscpos_exit(void) { i2c_del_driver(&fscpos_driver); } MODULE_AUTHOR("Stefan Ott <stefan@desire.ch> based on work from Hermann Jung " "<hej@odn.de>, Frodo Looijaard <frodol@dds.nl>" " and Philip Edelbrock <phil@netroedge.com>"); MODULE_DESCRIPTION("fujitsu siemens poseidon chip driver"); MODULE_LICENSE("GPL"); module_init(sm_fscpos_init); module_exit(sm_fscpos_exit);