/* * pata-legacy.c - Legacy port PATA/SATA controller driver. * Copyright 2005/2006 Red Hat <alan@redhat.com>, all rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; see the file COPYING. If not, write to * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. * * An ATA driver for the legacy ATA ports. * * Data Sources: * Opti 82C465/82C611 support: Data sheets at opti-inc.com * HT6560 series: * Promise 20230/20620: * http://www.ryston.cz/petr/vlb/pdc20230b.html * http://www.ryston.cz/petr/vlb/pdc20230c.html * http://www.ryston.cz/petr/vlb/pdc20630.html * * Unsupported but docs exist: * Appian/Adaptec AIC25VL01/Cirrus Logic PD7220 * Winbond W83759A * * This driver handles legacy (that is "ISA/VLB side") IDE ports found * on PC class systems. There are three hybrid devices that are exceptions * The Cyrix 5510/5520 where a pre SFF ATA device is on the bridge and * the MPIIX where the tuning is PCI side but the IDE is "ISA side". * * Specific support is included for the ht6560a/ht6560b/opti82c611a/ * opti82c465mv/promise 20230c/20630 * * Use the autospeed and pio_mask options with: * Appian ADI/2 aka CLPD7220 or AIC25VL01. * Use the jumpers, autospeed and set pio_mask to the mode on the jumpers with * Goldstar GM82C711, PIC-1288A-125, UMC 82C871F, Winbond W83759, * Winbond W83759A, Promise PDC20230-B * * For now use autospeed and pio_mask as above with the W83759A. This may * change. * * TODO * Merge existing pata_qdi driver * */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/init.h> #include <linux/blkdev.h> #include <linux/delay.h> #include <scsi/scsi_host.h> #include <linux/ata.h> #include <linux/libata.h> #include <linux/platform_device.h> #define DRV_NAME "pata_legacy" #define DRV_VERSION "0.5.3" #define NR_HOST 6 static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 }; static int legacy_irq[NR_HOST] = { 15, 14, 11, 10, 8, 12 }; struct legacy_data { unsigned long timing; u8 clock[2]; u8 last; int fast; struct platform_device *platform_dev; }; static struct legacy_data legacy_data[NR_HOST]; static struct ata_host *legacy_host[NR_HOST]; static int nr_legacy_host; static int probe_all; /* Set to check all ISA port ranges */ static int ht6560a; /* HT 6560A on primary 1, secondary 2, both 3 */ static int ht6560b; /* HT 6560A on primary 1, secondary 2, both 3 */ static int opti82c611a; /* Opti82c611A on primary 1, secondary 2, both 3 */ static int opti82c46x; /* Opti 82c465MV present (pri/sec autodetect) */ static int autospeed; /* Chip present which snoops speed changes */ static int pio_mask = 0x1F; /* PIO range for autospeed devices */ static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */ /** * legacy_set_mode - mode setting * @ap: IDE interface * @unused: Device that failed when error is returned * * Use a non standard set_mode function. We don't want to be tuned. * * The BIOS configured everything. Our job is not to fiddle. Just use * whatever PIO the hardware is using and leave it at that. When we * get some kind of nice user driven API for control then we can * expand on this as per hdparm in the base kernel. */ static int legacy_set_mode(struct ata_port *ap, struct ata_device **unused) { int i; for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; if (ata_dev_enabled(dev)) { ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); dev->pio_mode = XFER_PIO_0; dev->xfer_mode = XFER_PIO_0; dev->xfer_shift = ATA_SHIFT_PIO; dev->flags |= ATA_DFLAG_PIO; } } return 0; } static struct scsi_host_template legacy_sht = { .module = THIS_MODULE, .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, .sg_tablesize = LIBATA_MAX_PRD, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = ATA_SHT_USE_CLUSTERING, .proc_name = DRV_NAME, .dma_boundary = ATA_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, }; /* * These ops are used if the user indicates the hardware * snoops the commands to decide on the mode and handles the * mode selection "magically" itself. Several legacy controllers * do this. The mode range can be set if it is not 0x1F by setting * pio_mask as well. */ static struct ata_port_operations simple_port_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, .data_xfer = ata_data_xfer_noirq, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; static struct ata_port_operations legacy_port_ops = { .set_mode = legacy_set_mode, .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, .error_handler = ata_bmdma_error_handler, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, .data_xfer = ata_data_xfer_noirq, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; /* * Promise 20230C and 20620 support * * This controller supports PIO0 to PIO2. We set PIO timings conservatively to * allow for 50MHz Vesa Local Bus. The 20620 DMA support is weird being DMA to * controller and PIO'd to the host and not supported. */ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) { int tries = 5; int pio = adev->pio_mode - XFER_PIO_0; u8 rt; unsigned long flags; /* Safe as UP only. Force I/Os to occur together */ local_irq_save(flags); /* Unlock the control interface */ do { inb(0x1F5); outb(inb(0x1F2) | 0x80, 0x1F2); inb(0x1F2); inb(0x3F6); inb(0x3F6); inb(0x1F2); inb(0x1F2); } while((inb(0x1F2) & 0x80) && --tries); local_irq_restore(flags); outb(inb(0x1F4) & 0x07, 0x1F4); rt = inb(0x1F3); rt &= 0x07 << (3 * adev->devno); if (pio) rt |= (1 + 3 * pio) << (3 * adev->devno); udelay(100); outb(inb(0x1F2) | 0x01, 0x1F2); udelay(100); inb(0x1F5); } static void pdc_data_xfer_vlb(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) { struct ata_port *ap = adev->ap; int slop = buflen & 3; unsigned long flags; if (ata_id_has_dword_io(adev->id)) { local_irq_save(flags); /* Perform the 32bit I/O synchronization sequence */ ioread8(ap->ioaddr.nsect_addr); ioread8(ap->ioaddr.nsect_addr); ioread8(ap->ioaddr.nsect_addr); /* Now the data */ if (write_data) iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); else ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); if (unlikely(slop)) { u32 pad; if (write_data) { memcpy(&pad, buf + buflen - slop, slop); pad = le32_to_cpu(pad); iowrite32(pad, ap->ioaddr.data_addr); } else { pad = ioread32(ap->ioaddr.data_addr); pad = cpu_to_le16(pad); memcpy(buf + buflen - slop, &pad, slop); } } local_irq_restore(flags); } else ata_data_xfer_noirq(adev, buf, buflen, write_data); } static struct ata_port_operations pdc20230_port_ops = { .set_piomode = pdc20230_set_piomode, .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, .error_handler = ata_bmdma_error_handler, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, .data_xfer = pdc_data_xfer_vlb, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; /* * Holtek 6560A support * * This controller supports PIO0 to PIO2 (no IORDY even though higher timings * can be loaded). */ static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev) { u8 active, recover; struct ata_timing t; /* Get the timing data in cycles. For now play safe at 50Mhz */ ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); active = FIT(t.active, 2, 15); recover = FIT(t.recover, 4, 15); inb(0x3E6); inb(0x3E6); inb(0x3E6); inb(0x3E6); iowrite8(recover << 4 | active, ap->ioaddr.device_addr); ioread8(ap->ioaddr.status_addr); } static struct ata_port_operations ht6560a_port_ops = { .set_piomode = ht6560a_set_piomode, .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, .error_handler = ata_bmdma_error_handler, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, .data_xfer = ata_data_xfer, /* Check vlb/noirq */ .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; /* * Holtek 6560B support * * This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO setting * unless we see an ATAPI device in which case we force it off. * * FIXME: need to implement 2nd channel support. */ static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev) { u8 active, recover; struct ata_timing t; /* Get the timing data in cycles. For now play safe at 50Mhz */ ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); active = FIT(t.active, 2, 15); recover = FIT(t.recover, 2, 16); recover &= 0x15; inb(0x3E6); inb(0x3E6); inb(0x3E6); inb(0x3E6); iowrite8(recover << 4 | active, ap->ioaddr.device_addr); if (adev->class != ATA_DEV_ATA) { u8 rconf = inb(0x3E6); if (rconf & 0x24) { rconf &= ~ 0x24; outb(rconf, 0x3E6); } } ioread8(ap->ioaddr.status_addr); } static struct ata_port_operations ht6560b_port_ops = { .set_piomode = ht6560b_set_piomode, .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, .error_handler = ata_bmdma_error_handler, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, .data_xfer = ata_data_xfer, /* FIXME: Check 32bit and noirq */ .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; /* * Opti core chipset helpers */ /** * opti_syscfg - read OPTI chipset configuration * @reg: Configuration register to read * * Returns the value of an OPTI system board configuration register. */ static u8 opti_syscfg(u8 reg) { unsigned long flags; u8 r; /* Uniprocessor chipset and must force cycles adjancent */ local_irq_save(flags); outb(reg, 0x22); r = inb(0x24); local_irq_restore(flags); return r; } /* * Opti 82C611A * * This controller supports PIO0 to PIO3. */ static void opti82c611a_set_piomode(struct ata_port *ap, struct ata_device *adev) { u8 active, recover, setup; struct ata_timing t; struct ata_device *pair = ata_dev_pair(adev); int clock; int khz[4] = { 50000, 40000, 33000, 25000 }; u8 rc; /* Enter configuration mode */ ioread16(ap->ioaddr.error_addr); ioread16(ap->ioaddr.error_addr); iowrite8(3, ap->ioaddr.nsect_addr); /* Read VLB clock strapping */ clock = 1000000000 / khz[ioread8(ap->ioaddr.lbah_addr) & 0x03]; /* Get the timing data in cycles */ ata_timing_compute(adev, adev->pio_mode, &t, clock, 1000); /* Setup timing is shared */ if (pair) { struct ata_timing tp; ata_timing_compute(pair, pair->pio_mode, &tp, clock, 1000); ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); } active = FIT(t.active, 2, 17) - 2; recover = FIT(t.recover, 1, 16) - 1; setup = FIT(t.setup, 1, 4) - 1; /* Select the right timing bank for write timing */ rc = ioread8(ap->ioaddr.lbal_addr); rc &= 0x7F; rc |= (adev->devno << 7); iowrite8(rc, ap->ioaddr.lbal_addr); /* Write the timings */ iowrite8(active << 4 | recover, ap->ioaddr.error_addr); /* Select the right bank for read timings, also load the shared timings for address */ rc = ioread8(ap->ioaddr.device_addr); rc &= 0xC0; rc |= adev->devno; /* Index select */ rc |= (setup << 4) | 0x04; iowrite8(rc, ap->ioaddr.device_addr); /* Load the read timings */ iowrite8(active << 4 | recover, ap->ioaddr.data_addr); /* Ensure the timing register mode is right */ rc = ioread8(ap->ioaddr.lbal_addr); rc &= 0x73; rc |= 0x84; iowrite8(rc, ap->ioaddr.lbal_addr); /* Exit command mode */ iowrite8(0x83, ap->ioaddr.nsect_addr); } static struct ata_port_operations opti82c611a_port_ops = { .set_piomode = opti82c611a_set_piomode, .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, .error_handler = ata_bmdma_error_handler, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, .data_xfer = ata_data_xfer, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; /* * Opti 82C465MV * * This controller supports PIO0 to PIO3. Unlike the 611A the MVB * version is dual channel but doesn't have a lot of unique registers. */ static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev) { u8 active, recover, setup; struct ata_timing t; struct ata_device *pair = ata_dev_pair(adev); int clock; int khz[4] = { 50000, 40000, 33000, 25000 }; u8 rc; u8 sysclk; /* Get the clock */ sysclk = opti_syscfg(0xAC) & 0xC0; /* BIOS set */ /* Enter configuration mode */ ioread16(ap->ioaddr.error_addr); ioread16(ap->ioaddr.error_addr); iowrite8(3, ap->ioaddr.nsect_addr); /* Read VLB clock strapping */ clock = 1000000000 / khz[sysclk]; /* Get the timing data in cycles */ ata_timing_compute(adev, adev->pio_mode, &t, clock, 1000); /* Setup timing is shared */ if (pair) { struct ata_timing tp; ata_timing_compute(pair, pair->pio_mode, &tp, clock, 1000); ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); } active = FIT(t.active, 2, 17) - 2; recover = FIT(t.recover, 1, 16) - 1; setup = FIT(t.setup, 1, 4) - 1; /* Select the right timing bank for write timing */ rc = ioread8(ap->ioaddr.lbal_addr); rc &= 0x7F; rc |= (adev->devno << 7); iowrite8(rc, ap->ioaddr.lbal_addr); /* Write the timings */ iowrite8(active << 4 | recover, ap->ioaddr.error_addr); /* Select the right bank for read timings, also load the shared timings for address */ rc = ioread8(ap->ioaddr.device_addr); rc &= 0xC0; rc |= adev->devno; /* Index select */ rc |= (setup << 4) | 0x04; iowrite8(rc, ap->ioaddr.device_addr); /* Load the read timings */ iowrite8(active << 4 | recover, ap->ioaddr.data_addr); /* Ensure the timing register mode is right */ rc = ioread8(ap->ioaddr.lbal_addr); rc &= 0x73; rc |= 0x84; iowrite8(rc, ap->ioaddr.lbal_addr); /* Exit command mode */ iowrite8(0x83, ap->ioaddr.nsect_addr); /* We need to know this for quad device on the MVB */ ap->host->private_data = ap; } /** * opt82c465mv_qc_issue_prot - command issue * @qc: command pending * * Called when the libata layer is about to issue a command. We wrap * this interface so that we can load the correct ATA timings. The * MVB has a single set of timing registers and these are shared * across channels. As there are two registers we really ought to * track the last two used values as a sort of register window. For * now we just reload on a channel switch. On the single channel * setup this condition never fires so we do nothing extra. * * FIXME: dual channel needs ->serialize support */ static unsigned int opti82c46x_qc_issue_prot(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct ata_device *adev = qc->dev; /* If timings are set and for the wrong channel (2nd test is due to a libata shortcoming and will eventually go I hope) */ if (ap->host->private_data != ap->host && ap->host->private_data != NULL) opti82c46x_set_piomode(ap, adev); return ata_qc_issue_prot(qc); } static struct ata_port_operations opti82c46x_port_ops = { .set_piomode = opti82c46x_set_piomode, .port_disable = ata_port_disable, .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, .error_handler = ata_bmdma_error_handler, .qc_prep = ata_qc_prep, .qc_issue = opti82c46x_qc_issue_prot, .data_xfer = ata_data_xfer, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, .port_start = ata_port_start, }; /** * legacy_init_one - attach a legacy interface * @port: port number * @io: I/O port start * @ctrl: control port * @irq: interrupt line * * Register an ISA bus IDE interface. Such interfaces are PIO and we * assume do not support IRQ sharing. */ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl, int irq) { struct legacy_data *ld = &legacy_data[nr_legacy_host]; struct ata_probe_ent ae; struct platform_device *pdev; struct ata_port_operations *ops = &legacy_port_ops; void __iomem *io_addr, *ctrl_addr; int pio_modes = pio_mask; u32 mask = (1 << port); u32 iordy = (iordy_mask & mask) ? 0: ATA_FLAG_NO_IORDY; int ret; pdev = platform_device_register_simple(DRV_NAME, nr_legacy_host, NULL, 0); if (IS_ERR(pdev)) return PTR_ERR(pdev); ret = -EBUSY; if (devm_request_region(&pdev->dev, io, 8, "pata_legacy") == NULL || devm_request_region(&pdev->dev, ctrl, 1, "pata_legacy") == NULL) goto fail; ret = -ENOMEM; io_addr = devm_ioport_map(&pdev->dev, io, 8); ctrl_addr = devm_ioport_map(&pdev->dev, ctrl, 1); if (!io_addr || !ctrl_addr) goto fail; if (ht6560a & mask) { ops = &ht6560a_port_ops; pio_modes = 0x07; iordy = ATA_FLAG_NO_IORDY; } if (ht6560b & mask) { ops = &ht6560b_port_ops; pio_modes = 0x1F; } if (opti82c611a & mask) { ops = &opti82c611a_port_ops; pio_modes = 0x0F; } if (opti82c46x & mask) { ops = &opti82c46x_port_ops; pio_modes = 0x0F; } /* Probe for automatically detectable controllers */ if (io == 0x1F0 && ops == &legacy_port_ops) { unsigned long flags; local_irq_save(flags); /* Probes */ inb(0x1F5); outb(inb(0x1F2) | 0x80, 0x1F2); inb(0x1F2); inb(0x3F6); inb(0x3F6); inb(0x1F2); inb(0x1F2); if ((inb(0x1F2) & 0x80) == 0) { /* PDC20230c or 20630 ? */ printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller detected.\n"); pio_modes = 0x07; ops = &pdc20230_port_ops; iordy = ATA_FLAG_NO_IORDY; udelay(100); inb(0x1F5); } else { outb(0x55, 0x1F2); inb(0x1F2); inb(0x1F2); if (inb(0x1F2) == 0x00) { printk(KERN_INFO "PDC20230-B VLB ATA controller detected.\n"); } } local_irq_restore(flags); } /* Chip does mode setting by command snooping */ if (ops == &legacy_port_ops && (autospeed & mask)) ops = &simple_port_ops; memset(&ae, 0, sizeof(struct ata_probe_ent)); INIT_LIST_HEAD(&ae.node); ae.dev = &pdev->dev; ae.port_ops = ops; ae.sht = &legacy_sht; ae.n_ports = 1; ae.pio_mask = pio_modes; ae.irq = irq; ae.irq_flags = 0; ae.port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST|iordy; ae.port[0].cmd_addr = io_addr; ae.port[0].altstatus_addr = ctrl_addr; ae.port[0].ctl_addr = ctrl_addr; ata_std_ports(&ae.port[0]); ae.private_data = ld; ret = -ENODEV; if (!ata_device_add(&ae)) goto fail; legacy_host[nr_legacy_host++] = dev_get_drvdata(&pdev->dev); ld->platform_dev = pdev; return 0; fail: platform_device_unregister(pdev); return ret; } /** * legacy_check_special_cases - ATA special cases * @p: PCI device to check * @master: set this if we find an ATA master * @master: set this if we find an ATA secondary * * A small number of vendors implemented early PCI ATA interfaces on bridge logic * without the ATA interface being PCI visible. Where we have a matching PCI driver * we must skip the relevant device here. If we don't know about it then the legacy * driver is the right driver anyway. */ static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *secondary) { /* Cyrix CS5510 pre SFF MWDMA ATA on the bridge */ if (p->vendor == 0x1078 && p->device == 0x0000) { *primary = *secondary = 1; return; } /* Cyrix CS5520 pre SFF MWDMA ATA on the bridge */ if (p->vendor == 0x1078 && p->device == 0x0002) { *primary = *secondary = 1; return; } /* Intel MPIIX - PIO ATA on non PCI side of bridge */ if (p->vendor == 0x8086 && p->device == 0x1234) { u16 r; pci_read_config_word(p, 0x6C, &r); if (r & 0x8000) { /* ATA port enabled */ if (r & 0x4000) *secondary = 1; else *primary = 1; } return; } } /** * legacy_init - attach legacy interfaces * * Attach legacy IDE interfaces by scanning the usual IRQ/port suspects. * Right now we do not scan the ide0 and ide1 address but should do so * for non PCI systems or systems with no PCI IDE legacy mode devices. * If you fix that note there are special cases to consider like VLB * drivers and CS5510/20. */ static __init int legacy_init(void) { int i; int ct = 0; int primary = 0; int secondary = 0; int last_port = NR_HOST; struct pci_dev *p = NULL; for_each_pci_dev(p) { int r; /* Check for any overlap of the system ATA mappings. Native mode controllers stuck on these addresses or some devices in 'raid' mode won't be found by the storage class test */ for (r = 0; r < 6; r++) { if (pci_resource_start(p, r) == 0x1f0) primary = 1; if (pci_resource_start(p, r) == 0x170) secondary = 1; } /* Check for special cases */ legacy_check_special_cases(p, &primary, &secondary); /* If PCI bus is present then don't probe for tertiary legacy ports */ if (probe_all == 0) last_port = 2; } /* If an OPTI 82C46X is present find out where the channels are */ if (opti82c46x) { static const char *optis[4] = { "3/463MV", "5MV", "5MVA", "5MVB" }; u8 chans = 1; u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6; opti82c46x = 3; /* Assume master and slave first */ printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n", optis[ctrl]); if (ctrl == 3) chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1; ctrl = opti_syscfg(0xAC); /* Check enabled and this port is the 465MV port. On the MVB we may have two channels */ if (ctrl & 8) { if (ctrl & 4) opti82c46x = 2; /* Slave */ else opti82c46x = 1; /* Master */ if (chans == 2) opti82c46x = 3; /* Master and Slave */ } /* Slave only */ else if (chans == 1) opti82c46x = 1; } for (i = 0; i < last_port; i++) { /* Skip primary if we have seen a PCI one */ if (i == 0 && primary == 1) continue; /* Skip secondary if we have seen a PCI one */ if (i == 1 && secondary == 1) continue; if (legacy_init_one(i, legacy_port[i], legacy_port[i] + 0x0206, legacy_irq[i]) == 0) ct++; } if (ct != 0) return 0; return -ENODEV; } static __exit void legacy_exit(void) { int i; for (i = 0; i < nr_legacy_host; i++) { struct legacy_data *ld = &legacy_data[i]; ata_host_detach(legacy_host[i]); platform_device_unregister(ld->platform_dev); if (ld->timing) release_region(ld->timing, 2); } } MODULE_AUTHOR("Alan Cox"); MODULE_DESCRIPTION("low-level driver for legacy ATA"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); module_param(probe_all, int, 0); module_param(autospeed, int, 0); module_param(ht6560a, int, 0); module_param(ht6560b, int, 0); module_param(opti82c611a, int, 0); module_param(opti82c46x, int, 0); module_param(pio_mask, int, 0); module_param(iordy_mask, int, 0); module_init(legacy_init); module_exit(legacy_exit);