/******************************************************************************* * * Module Name: rsmisc - Miscellaneous resource descriptors * ******************************************************************************/ /* * Copyright (C) 2000 - 2005, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #include #include #define _COMPONENT ACPI_RESOURCES ACPI_MODULE_NAME ("rsmisc") /******************************************************************************* * * FUNCTION: acpi_rs_end_tag_resource * * PARAMETERS: byte_stream_buffer - Pointer to the resource input byte * stream * bytes_consumed - Pointer to where the number of bytes * consumed the byte_stream_buffer is * returned * output_buffer - Pointer to the return data buffer * structure_size - Pointer to where the number of bytes * in the return data struct is returned * * RETURN: Status * * DESCRIPTION: Take the resource byte stream and fill out the appropriate * structure pointed to by the output_buffer. Return the * number of bytes consumed from the byte stream. * ******************************************************************************/ acpi_status acpi_rs_end_tag_resource ( u8 *byte_stream_buffer, acpi_size *bytes_consumed, u8 **output_buffer, acpi_size *structure_size) { struct acpi_resource *output_struct = (void *) *output_buffer; acpi_size struct_size = ACPI_RESOURCE_LENGTH; ACPI_FUNCTION_TRACE ("rs_end_tag_resource"); /* * The number of bytes consumed is static */ *bytes_consumed = 2; /* * Fill out the structure */ output_struct->id = ACPI_RSTYPE_END_TAG; /* * Set the Length parameter */ output_struct->length = 0; /* * Return the final size of the structure */ *structure_size = struct_size; return_ACPI_STATUS (AE_OK); } /******************************************************************************* * * FUNCTION: acpi_rs_end_tag_stream * * PARAMETERS: linked_list - Pointer to the resource linked list * output_buffer - Pointer to the user's return buffer * bytes_consumed - Pointer to where the number of bytes * used in the output_buffer is returned * * RETURN: Status * * DESCRIPTION: Take the linked list resource structure and fills in the * the appropriate bytes in a byte stream * ******************************************************************************/ acpi_status acpi_rs_end_tag_stream ( struct acpi_resource *linked_list, u8 **output_buffer, acpi_size *bytes_consumed) { u8 *buffer = *output_buffer; u8 temp8 = 0; ACPI_FUNCTION_TRACE ("rs_end_tag_stream"); /* * The descriptor field is static */ *buffer = 0x79; buffer += 1; /* * Set the Checksum - zero means that the resource data is treated as if * the checksum operation succeeded (ACPI Spec 1.0b Section 6.4.2.8) */ temp8 = 0; *buffer = temp8; buffer += 1; /* * Return the number of bytes consumed in this operation */ *bytes_consumed = ACPI_PTR_DIFF (buffer, *output_buffer); return_ACPI_STATUS (AE_OK); } /******************************************************************************* * * FUNCTION: acpi_rs_vendor_resource * * PARAMETERS: byte_stream_buffer - Pointer to the resource input byte * stream * bytes_consumed - Pointer to where the number of bytes * consumed the byte_stream_buffer is * returned * output_buffer - Pointer to the return data buffer * structure_size - Pointer to where the number of bytes * in the return data struct is returned * * RETURN: Status * * DESCRIPTION: Take the resource byte stream and fill out the appropriate * structure pointed to by the output_buffer. Return the * number of bytes consumed from the byte stream. * ******************************************************************************/ acpi_status acpi_rs_vendor_resource ( u8 *byte_stream_buffer, acpi_size *bytes_consumed, u8 **output_buffer, acpi_size *structure_size) { u8 *buffer = byte_stream_buffer; struct acpi_resource *output_struct = (void *) *output_buffer; u16 temp16 = 0; u8 temp8 = 0; u8 index; acpi_size struct_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_vendor); ACPI_FUNCTION_TRACE ("rs_vendor_resource"); /* * Dereference the Descriptor to find if this is a large or small item. */ temp8 = *buffer; if (temp8 & 0x80) { /* * Large Item, point to the length field */ buffer += 1; /* Dereference */ ACPI_MOVE_16_TO_16 (&temp16, buffer); /* Calculate bytes consumed */ *bytes_consumed = (acpi_size) temp16 + 3; /* Point to the first vendor byte */ buffer += 2; } else { /* * Small Item, dereference the size */ temp16 = (u8)(*buffer & 0x07); /* Calculate bytes consumed */ *bytes_consumed = (acpi_size) temp16 + 1; /* Point to the first vendor byte */ buffer += 1; } output_struct->id = ACPI_RSTYPE_VENDOR; output_struct->data.vendor_specific.length = temp16; for (index = 0; index < temp16; index++) { output_struct->data.vendor_specific.reserved[index] = *buffer; buffer += 1; } /* * In order for the struct_size to fall on a 32-bit boundary, * calculate the length of the vendor string and expand the * struct_size to the next 32-bit boundary. */ struct_size += ACPI_ROUND_UP_to_32_bITS (temp16); /* * Set the Length parameter */ output_struct->length = (u32) struct_size; /* * Return the final size of the structure */ *structure_size = struct_size; return_ACPI_STATUS (AE_OK); } /******************************************************************************* * * FUNCTION: acpi_rs_vendor_stream * * PARAMETERS: linked_list - Pointer to the resource linked list * output_buffer - Pointer to the user's return buffer * bytes_consumed - Pointer to where the number of bytes * used in the output_buffer is returned * * RETURN: Status * * DESCRIPTION: Take the linked list resource structure and fills in the * the appropriate bytes in a byte stream * ******************************************************************************/ acpi_status acpi_rs_vendor_stream ( struct acpi_resource *linked_list, u8 **output_buffer, acpi_size *bytes_consumed) { u8 *buffer = *output_buffer; u16 temp16 = 0; u8 temp8 = 0; u8 index; ACPI_FUNCTION_TRACE ("rs_vendor_stream"); /* * Dereference the length to find if this is a large or small item. */ if(linked_list->data.vendor_specific.length > 7) { /* * Large Item, Set the descriptor field and length bytes */ *buffer = 0x84; buffer += 1; temp16 = (u16) linked_list->data.vendor_specific.length; ACPI_MOVE_16_TO_16 (buffer, &temp16); buffer += 2; } else { /* * Small Item, Set the descriptor field */ temp8 = 0x70; temp8 |= (u8) linked_list->data.vendor_specific.length; *buffer = temp8; buffer += 1; } /* * Loop through all of the Vendor Specific fields */ for (index = 0; index < linked_list->data.vendor_specific.length; index++) { temp8 = linked_list->data.vendor_specific.reserved[index]; *buffer = temp8; buffer += 1; } /* * Return the number of bytes consumed in this operation */ *bytes_consumed = ACPI_PTR_DIFF (buffer, *output_buffer); return_ACPI_STATUS (AE_OK); } /******************************************************************************* * * FUNCTION: acpi_rs_start_depend_fns_resource * * PARAMETERS: byte_stream_buffer - Pointer to the resource input byte * stream * bytes_consumed - Pointer to where the number of bytes * consumed the byte_stream_buffer is * returned * output_buffer - Pointer to the return data buffer * structure_size - Pointer to where the number of bytes * in the return data struct is returned * * RETURN: Status * * DESCRIPTION: Take the resource byte stream and fill out the appropriate * structure pointed to by the output_buffer. Return the * number of bytes consumed from the byte stream. * ******************************************************************************/ acpi_status acpi_rs_start_depend_fns_resource ( u8 *byte_stream_buffer, acpi_size *bytes_consumed, u8 **output_buffer, acpi_size *structure_size) { u8 *buffer = byte_stream_buffer; struct acpi_resource *output_struct = (void *) *output_buffer; u8 temp8 = 0; acpi_size struct_size = ACPI_SIZEOF_RESOURCE (struct acpi_resource_start_dpf); ACPI_FUNCTION_TRACE ("rs_start_depend_fns_resource"); /* * The number of bytes consumed are contained in the descriptor (Bits:0-1) */ temp8 = *buffer; *bytes_consumed = (temp8 & 0x01) + 1; output_struct->id = ACPI_RSTYPE_START_DPF; /* * Point to Byte 1 if it is used */ if (2 == *bytes_consumed) { buffer += 1; temp8 = *buffer; /* * Check Compatibility priority */ output_struct->data.start_dpf.compatibility_priority = temp8 & 0x03; if (3 == output_struct->data.start_dpf.compatibility_priority) { return_ACPI_STATUS (AE_AML_BAD_RESOURCE_VALUE); } /* * Check Performance/Robustness preference */ output_struct->data.start_dpf.performance_robustness = (temp8 >> 2) & 0x03; if (3 == output_struct->data.start_dpf.performance_robustness) { return_ACPI_STATUS (AE_AML_BAD_RESOURCE_VALUE); } } else { output_struct->data.start_dpf.compatibility_priority = ACPI_ACCEPTABLE_CONFIGURATION; output_struct->data.start_dpf.performance_robustness = ACPI_ACCEPTABLE_CONFIGURATION; } /* * Set the Length parameter */ output_struct->length = (u32) struct_size; /* * Return the final size of the structure */ *structure_size = struct_size; return_ACPI_STATUS (AE_OK); } /******************************************************************************* * * FUNCTION: acpi_rs_end_depend_fns_resource * * PARAMETERS: byte_stream_buffer - Pointer to the resource input byte * stream * bytes_consumed - Pointer to where the number of bytes * consumed the byte_stream_buffer is * returned * output_buffer - Pointer to the return data buffer * structure_size - Pointer to where the number of bytes * in the return data struct is returned * * RETURN: Status * * DESCRIPTION: Take the resource byte stream and fill out the appropriate * structure pointed to by the output_buffer. Return the * number of bytes consumed from the byte stream. * ******************************************************************************/ acpi_status acpi_rs_end_depend_fns_resource ( u8 *byte_stream_buffer, acpi_size *bytes_consumed, u8 **output_buffer, acpi_size *structure_size) { struct acpi_resource *output_struct = (void *) *output_buffer; acpi_size struct_size = ACPI_RESOURCE_LENGTH; ACPI_FUNCTION_TRACE ("rs_end_depend_fns_resource"); /* * The number of bytes consumed is static */ *bytes_consumed = 1; /* * Fill out the structure */ output_struct->id = ACPI_RSTYPE_END_DPF; /* * Set the Length parameter */ output_struct->length = (u32) struct_size; /* * Return the final size of the structure */ *structure_size = struct_size; return_ACPI_STATUS (AE_OK); } /******************************************************************************* * * FUNCTION: acpi_rs_start_depend_fns_stream * * PARAMETERS: linked_list - Pointer to the resource linked list * output_buffer - Pointer to the user's return buffer * bytes_consumed - u32 pointer that is filled with * the number of bytes of the * output_buffer used * * RETURN: Status * * DESCRIPTION: Take the linked list resource structure and fills in the * the appropriate bytes in a byte stream * ******************************************************************************/ acpi_status acpi_rs_start_depend_fns_stream ( struct acpi_resource *linked_list, u8 **output_buffer, acpi_size *bytes_consumed) { u8 *buffer = *output_buffer; u8 temp8 = 0; ACPI_FUNCTION_TRACE ("rs_start_depend_fns_stream"); /* * The descriptor field is set based upon whether a byte is needed * to contain Priority data. */ if (ACPI_ACCEPTABLE_CONFIGURATION == linked_list->data.start_dpf.compatibility_priority && ACPI_ACCEPTABLE_CONFIGURATION == linked_list->data.start_dpf.performance_robustness) { *buffer = 0x30; } else { *buffer = 0x31; buffer += 1; /* * Set the Priority Byte Definition */ temp8 = 0; temp8 = (u8) ((linked_list->data.start_dpf.performance_robustness & 0x03) << 2); temp8 |= (linked_list->data.start_dpf.compatibility_priority & 0x03); *buffer = temp8; } buffer += 1; /* * Return the number of bytes consumed in this operation */ *bytes_consumed = ACPI_PTR_DIFF (buffer, *output_buffer); return_ACPI_STATUS (AE_OK); } /******************************************************************************* * * FUNCTION: acpi_rs_end_depend_fns_stream * * PARAMETERS: linked_list - Pointer to the resource linked list * output_buffer - Pointer to the user's return buffer * bytes_consumed - Pointer to where the number of bytes * used in the output_buffer is returned * * RETURN: Status * * DESCRIPTION: Take the linked list resource structure and fills in the * the appropriate bytes in a byte stream * ******************************************************************************/ acpi_status acpi_rs_end_depend_fns_stream ( struct acpi_resource *linked_list, u8 **output_buffer, acpi_size *bytes_consumed) { u8 *buffer = *output_buffer; ACPI_FUNCTION_TRACE ("rs_end_depend_fns_stream"); /* * The descriptor field is static */ *buffer = 0x38; buffer += 1; /* * Return the number of bytes consumed in this operation */ *bytes_consumed = ACPI_PTR_DIFF (buffer, *output_buffer); return_ACPI_STATUS (AE_OK); }