/* * tsi108/109 device setup code * * Maintained by Roy Zang < tie-fei.zang@freescale.com > * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ #include <linux/stddef.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/errno.h> #include <linux/major.h> #include <linux/delay.h> #include <linux/irq.h> #include <linux/module.h> #include <linux/device.h> #include <linux/platform_device.h> #include <asm/tsi108.h> #include <asm/system.h> #include <asm/atomic.h> #include <asm/io.h> #include <asm/irq.h> #include <asm/prom.h> #include <mm/mmu_decl.h> #undef DEBUG #ifdef DEBUG #define DBG(fmt...) do { printk(fmt); } while(0) #else #define DBG(fmt...) do { } while(0) #endif static phys_addr_t tsi108_csr_base = -1; phys_addr_t get_csrbase(void) { struct device_node *tsi; if (tsi108_csr_base != -1) return tsi108_csr_base; tsi = of_find_node_by_type(NULL, "tsi-bridge"); if (tsi) { unsigned int size; const void *prop = of_get_property(tsi, "reg", &size); tsi108_csr_base = of_translate_address(tsi, prop); of_node_put(tsi); }; return tsi108_csr_base; } u32 get_vir_csrbase(void) { return (u32) (ioremap(get_csrbase(), 0x10000)); } EXPORT_SYMBOL(get_csrbase); EXPORT_SYMBOL(get_vir_csrbase); static int __init tsi108_eth_of_init(void) { struct device_node *np; unsigned int i = 0; struct platform_device *tsi_eth_dev; struct resource res; int ret; for_each_compatible_node(np, "network", "tsi108-ethernet") { struct resource r[2]; struct device_node *phy, *mdio; hw_info tsi_eth_data; const unsigned int *phy_id; const void *mac_addr; const phandle *ph; memset(r, 0, sizeof(r)); memset(&tsi_eth_data, 0, sizeof(tsi_eth_data)); ret = of_address_to_resource(np, 0, &r[0]); DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n", __func__,r[0].name, r[0].start, r[0].end); if (ret) goto err; r[1].name = "tx"; r[1].start = irq_of_parse_and_map(np, 0); r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n", __func__,r[1].name, r[1].start, r[1].end); tsi_eth_dev = platform_device_register_simple("tsi-ethernet", i++, &r[0], 1); if (IS_ERR(tsi_eth_dev)) { ret = PTR_ERR(tsi_eth_dev); goto err; } mac_addr = of_get_mac_address(np); if (mac_addr) memcpy(tsi_eth_data.mac_addr, mac_addr, 6); ph = of_get_property(np, "mdio-handle", NULL); mdio = of_find_node_by_phandle(*ph); ret = of_address_to_resource(mdio, 0, &res); of_node_put(mdio); if (ret) goto unreg; ph = of_get_property(np, "phy-handle", NULL); phy = of_find_node_by_phandle(*ph); if (phy == NULL) { ret = -ENODEV; goto unreg; } phy_id = of_get_property(phy, "reg", NULL); tsi_eth_data.regs = r[0].start; tsi_eth_data.phyregs = res.start; tsi_eth_data.phy = *phy_id; tsi_eth_data.irq_num = irq_of_parse_and_map(np, 0); /* Some boards with the TSI108 bridge (e.g. Holly) * have a miswiring of the ethernet PHYs which * requires a workaround. The special * "txc-rxc-delay-disable" property enables this * workaround. FIXME: Need to port the tsi108_eth * driver itself to phylib and use a non-misleading * name for the workaround flag - it's not actually to * do with the model of PHY in use */ if (of_get_property(phy, "txc-rxc-delay-disable", NULL)) tsi_eth_data.phy_type = TSI108_PHY_BCM54XX; of_node_put(phy); ret = platform_device_add_data(tsi_eth_dev, &tsi_eth_data, sizeof(hw_info)); if (ret) goto unreg; } return 0; unreg: platform_device_unregister(tsi_eth_dev); err: of_node_put(np); return ret; } arch_initcall(tsi108_eth_of_init);