/* MN10300 On-chip serial port driver definitions * * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public Licence * as published by the Free Software Foundation; either version * 2 of the Licence, or (at your option) any later version. */ #ifndef _MN10300_SERIAL_H #define _MN10300_SERIAL_H #ifndef __ASSEMBLY__ #include <linux/serial_core.h> #include <linux/termios.h> #endif #include <asm/page.h> #include <asm/serial-regs.h> #define NR_PORTS 3 /* should be set 3 or 9 or 16 */ #define MNSC_BUFFER_SIZE +(PAGE_SIZE / 2) /* intr_flags bits */ #define MNSCx_RX_AVAIL 0x01 #define MNSCx_RX_OVERF 0x02 #define MNSCx_TX_SPACE 0x04 #define MNSCx_TX_EMPTY 0x08 #ifndef __ASSEMBLY__ struct mn10300_serial_port { char *rx_buffer; /* reception buffer base */ unsigned rx_inp; /* pointer to rx input offset */ unsigned rx_outp; /* pointer to rx output offset */ u8 tx_xchar; /* high-priority XON/XOFF buffer */ u8 tx_break; /* transmit break request */ u8 intr_flags; /* interrupt flags */ volatile u16 *rx_icr; /* Rx interrupt control register */ volatile u16 *tx_icr; /* Tx interrupt control register */ int rx_irq; /* reception IRQ */ int tx_irq; /* transmission IRQ */ int tm_irq; /* timer IRQ */ const char *name; /* name of serial port */ const char *rx_name; /* Rx interrupt handler name of serial port */ const char *tx_name; /* Tx interrupt handler name of serial port */ const char *tm_name; /* Timer interrupt handler name */ unsigned short type; /* type of serial port */ unsigned char isconsole; /* T if it's a console */ volatile void *_iobase; /* pointer to base of I/O control regs */ volatile u16 *_control; /* control register pointer */ volatile u8 *_status; /* status register pointer */ volatile u8 *_intr; /* interrupt register pointer */ volatile void *_rxb; /* receive buffer register pointer */ volatile void *_txb; /* transmit buffer register pointer */ volatile u16 *_tmicr; /* timer interrupt control register */ volatile u8 *_tmxmd; /* baud rate timer mode register */ volatile u16 *_tmxbr; /* baud rate timer base register */ /* this must come down here so that assembly can use BSET to access the * above fields */ struct uart_port uart; unsigned short rx_brk; /* current break reception status */ u16 tx_cts; /* current CTS status */ int gdbstub; /* preemptively stolen by GDB stub */ u8 clock_src; /* clock source */ #define MNSCx_CLOCK_SRC_IOCLK 0 #define MNSCx_CLOCK_SRC_IOBCLK 1 u8 div_timer; /* timer used as divisor */ #define MNSCx_DIV_TIMER_16BIT 0 #define MNSCx_DIV_TIMER_8BIT 1 u16 options; /* options */ #define MNSCx_OPT_CTS 0x0001 unsigned long ioclk; /* base clock rate */ }; #ifdef CONFIG_MN10300_TTYSM0 extern struct mn10300_serial_port mn10300_serial_port_sif0; #endif #ifdef CONFIG_MN10300_TTYSM1 extern struct mn10300_serial_port mn10300_serial_port_sif1; #endif #ifdef CONFIG_MN10300_TTYSM2 extern struct mn10300_serial_port mn10300_serial_port_sif2; #endif extern struct mn10300_serial_port *mn10300_serial_ports[]; struct mn10300_serial_int { struct mn10300_serial_port *port; asmlinkage void (*vdma)(void); }; extern struct mn10300_serial_int mn10300_serial_int_tbl[]; extern asmlinkage void mn10300_serial_vdma_interrupt(void); extern asmlinkage void mn10300_serial_vdma_rx_handler(void); extern asmlinkage void mn10300_serial_vdma_tx_handler(void); #endif /* __ASSEMBLY__ */ #if defined(CONFIG_GDBSTUB_ON_TTYSM0) #define SCgSTR SC0STR #define SCgRXB SC0RXB #define SCgRXIRQ SC0RXIRQ #elif defined(CONFIG_GDBSTUB_ON_TTYSM1) #define SCgSTR SC1STR #define SCgRXB SC1RXB #define SCgRXIRQ SC1RXIRQ #elif defined(CONFIG_GDBSTUB_ON_TTYSM2) #define SCgSTR SC2STR #define SCgRXB SC2RXB #define SCgRXIRQ SC2RXIRQ #endif #endif /* _MN10300_SERIAL_H */