/* * linux/arch/i386/kernel/mca.c * Written by Martin Kolinek, February 1996 * * Changes: * * Chris Beauregard July 28th, 1996 * - Fixed up integrated SCSI detection * * Chris Beauregard August 3rd, 1996 * - Made mca_info local * - Made integrated registers accessible through standard function calls * - Added name field * - More sanity checking * * Chris Beauregard August 9th, 1996 * - Rewrote /proc/mca * * Chris Beauregard January 7th, 1997 * - Added basic NMI-processing * - Added more information to mca_info structure * * David Weinehall October 12th, 1998 * - Made a lot of cleaning up in the source * - Added use of save_flags / restore_flags * - Added the 'driver_loaded' flag in MCA_adapter * - Added an alternative implemention of ZP Gu's mca_find_unused_adapter * * David Weinehall March 24th, 1999 * - Fixed the output of 'Driver Installed' in /proc/mca/pos * - Made the Integrated Video & SCSI show up even if they have id 0000 * * Alexander Viro November 9th, 1999 * - Switched to regular procfs methods * * Alfred Arnold & David Weinehall August 23rd, 2000 * - Added support for Planar POS-registers */ #include <linux/module.h> #include <linux/types.h> #include <linux/errno.h> #include <linux/kernel.h> #include <linux/mca.h> #include <linux/kprobes.h> #include <asm/system.h> #include <asm/io.h> #include <linux/proc_fs.h> #include <linux/mman.h> #include <linux/mm.h> #include <linux/pagemap.h> #include <linux/ioport.h> #include <asm/uaccess.h> #include <linux/init.h> #include <asm/arch_hooks.h> static unsigned char which_scsi = 0; int MCA_bus = 0; EXPORT_SYMBOL(MCA_bus); /* * Motherboard register spinlock. Untested on SMP at the moment, but * are there any MCA SMP boxes? * * Yes - Alan */ static DEFINE_SPINLOCK(mca_lock); /* Build the status info for the adapter */ static void mca_configure_adapter_status(struct mca_device *mca_dev) { mca_dev->status = MCA_ADAPTER_NONE; mca_dev->pos_id = mca_dev->pos[0] + (mca_dev->pos[1] << 8); if(!mca_dev->pos_id && mca_dev->slot < MCA_MAX_SLOT_NR) { /* id = 0x0000 usually indicates hardware failure, * however, ZP Gu (zpg@castle.net> reports that his 9556 * has 0x0000 as id and everything still works. There * also seem to be an adapter with id = 0x0000; the * NCR Parallel Bus Memory Card. Until this is confirmed, * however, this code will stay. */ mca_dev->status = MCA_ADAPTER_ERROR; return; } else if(mca_dev->pos_id != 0xffff) { /* 0xffff usually indicates that there's no adapter, * however, some integrated adapters may have 0xffff as * their id and still be valid. Examples are on-board * VGA of the 55sx, the integrated SCSI of the 56 & 57, * and possibly also the 95 ULTIMEDIA. */ mca_dev->status = MCA_ADAPTER_NORMAL; } if((mca_dev->pos_id == 0xffff || mca_dev->pos_id == 0x0000) && mca_dev->slot >= MCA_MAX_SLOT_NR) { int j; for(j = 2; j < 8; j++) { if(mca_dev->pos[j] != 0xff) { mca_dev->status = MCA_ADAPTER_NORMAL; break; } } } if(!(mca_dev->pos[2] & MCA_ENABLED)) { /* enabled bit is in POS 2 */ mca_dev->status = MCA_ADAPTER_DISABLED; } } /* mca_configure_adapter_status */ /*--------------------------------------------------------------------*/ static struct resource mca_standard_resources[] = { { .start = 0x60, .end = 0x60, .name = "system control port B (MCA)" }, { .start = 0x90, .end = 0x90, .name = "arbitration (MCA)" }, { .start = 0x91, .end = 0x91, .name = "card Select Feedback (MCA)" }, { .start = 0x92, .end = 0x92, .name = "system Control port A (MCA)" }, { .start = 0x94, .end = 0x94, .name = "system board setup (MCA)" }, { .start = 0x96, .end = 0x97, .name = "POS (MCA)" }, { .start = 0x100, .end = 0x107, .name = "POS (MCA)" } }; #define MCA_STANDARD_RESOURCES ARRAY_SIZE(mca_standard_resources) /** * mca_read_and_store_pos - read the POS registers into a memory buffer * @pos: a char pointer to 8 bytes, contains the POS register value on * successful return * * Returns 1 if a card actually exists (i.e. the pos isn't * all 0xff) or 0 otherwise */ static int mca_read_and_store_pos(unsigned char *pos) { int j; int found = 0; for(j=0; j<8; j++) { if((pos[j] = inb_p(MCA_POS_REG(j))) != 0xff) { /* 0xff all across means no device. 0x00 means * something's broken, but a device is * probably there. However, if you get 0x00 * from a motherboard register it won't matter * what we find. For the record, on the * 57SLC, the integrated SCSI adapter has * 0xffff for the adapter ID, but nonzero for * other registers. */ found = 1; } } return found; } static unsigned char mca_pc_read_pos(struct mca_device *mca_dev, int reg) { unsigned char byte; unsigned long flags; if(reg < 0 || reg >= 8) return 0; spin_lock_irqsave(&mca_lock, flags); if(mca_dev->pos_register) { /* Disable adapter setup, enable motherboard setup */ outb_p(0, MCA_ADAPTER_SETUP_REG); outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG); byte = inb_p(MCA_POS_REG(reg)); outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG); } else { /* Make sure motherboard setup is off */ outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG); /* Read the appropriate register */ outb_p(0x8|(mca_dev->slot & 0xf), MCA_ADAPTER_SETUP_REG); byte = inb_p(MCA_POS_REG(reg)); outb_p(0, MCA_ADAPTER_SETUP_REG); } spin_unlock_irqrestore(&mca_lock, flags); mca_dev->pos[reg] = byte; return byte; } static void mca_pc_write_pos(struct mca_device *mca_dev, int reg, unsigned char byte) { unsigned long flags; if(reg < 0 || reg >= 8) return; spin_lock_irqsave(&mca_lock, flags); /* Make sure motherboard setup is off */ outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG); /* Read in the appropriate register */ outb_p(0x8|(mca_dev->slot&0xf), MCA_ADAPTER_SETUP_REG); outb_p(byte, MCA_POS_REG(reg)); outb_p(0, MCA_ADAPTER_SETUP_REG); spin_unlock_irqrestore(&mca_lock, flags); /* Update the global register list, while we have the byte */ mca_dev->pos[reg] = byte; } /* for the primary MCA bus, we have identity transforms */ static int mca_dummy_transform_irq(struct mca_device * mca_dev, int irq) { return irq; } static int mca_dummy_transform_ioport(struct mca_device * mca_dev, int port) { return port; } static void *mca_dummy_transform_memory(struct mca_device * mca_dev, void *mem) { return mem; } static int __init mca_init(void) { unsigned int i, j; struct mca_device *mca_dev; unsigned char pos[8]; short mca_builtin_scsi_ports[] = {0xf7, 0xfd, 0x00}; struct mca_bus *bus; /* WARNING: Be careful when making changes here. Putting an adapter * and the motherboard simultaneously into setup mode may result in * damage to chips (according to The Indispensible PC Hardware Book * by Hans-Peter Messmer). Also, we disable system interrupts (so * that we are not disturbed in the middle of this). */ /* Make sure the MCA bus is present */ if (mca_system_init()) { printk(KERN_ERR "MCA bus system initialisation failed\n"); return -ENODEV; } if (!MCA_bus) return -ENODEV; printk(KERN_INFO "Micro Channel bus detected.\n"); /* All MCA systems have at least a primary bus */ bus = mca_attach_bus(MCA_PRIMARY_BUS); if (!bus) goto out_nomem; bus->default_dma_mask = 0xffffffffLL; bus->f.mca_write_pos = mca_pc_write_pos; bus->f.mca_read_pos = mca_pc_read_pos; bus->f.mca_transform_irq = mca_dummy_transform_irq; bus->f.mca_transform_ioport = mca_dummy_transform_ioport; bus->f.mca_transform_memory = mca_dummy_transform_memory; /* get the motherboard device */ mca_dev = kzalloc(sizeof(struct mca_device), GFP_KERNEL); if(unlikely(!mca_dev)) goto out_nomem; /* * We do not expect many MCA interrupts during initialization, * but let us be safe: */ spin_lock_irq(&mca_lock); /* Make sure adapter setup is off */ outb_p(0, MCA_ADAPTER_SETUP_REG); /* Read motherboard POS registers */ mca_dev->pos_register = 0x7f; outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG); mca_dev->name[0] = 0; mca_read_and_store_pos(mca_dev->pos); mca_configure_adapter_status(mca_dev); /* fake POS and slot for a motherboard */ mca_dev->pos_id = MCA_MOTHERBOARD_POS; mca_dev->slot = MCA_MOTHERBOARD; mca_register_device(MCA_PRIMARY_BUS, mca_dev); mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC); if(unlikely(!mca_dev)) goto out_unlock_nomem; /* Put motherboard into video setup mode, read integrated video * POS registers, and turn motherboard setup off. */ mca_dev->pos_register = 0xdf; outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG); mca_dev->name[0] = 0; mca_read_and_store_pos(mca_dev->pos); mca_configure_adapter_status(mca_dev); /* fake POS and slot for the integrated video */ mca_dev->pos_id = MCA_INTEGVIDEO_POS; mca_dev->slot = MCA_INTEGVIDEO; mca_register_device(MCA_PRIMARY_BUS, mca_dev); /* Put motherboard into scsi setup mode, read integrated scsi * POS registers, and turn motherboard setup off. * * It seems there are two possible SCSI registers. Martin says that * for the 56,57, 0xf7 is the one, but fails on the 76. * Alfredo (apena@vnet.ibm.com) says * 0xfd works on his machine. We'll try both of them. I figure it's * a good bet that only one could be valid at a time. This could * screw up though if one is used for something else on the other * machine. */ for(i = 0; (which_scsi = mca_builtin_scsi_ports[i]) != 0; i++) { outb_p(which_scsi, MCA_MOTHERBOARD_SETUP_REG); if(mca_read_and_store_pos(pos)) break; } if(which_scsi) { /* found a scsi card */ mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC); if(unlikely(!mca_dev)) goto out_unlock_nomem; for(j = 0; j < 8; j++) mca_dev->pos[j] = pos[j]; mca_configure_adapter_status(mca_dev); /* fake POS and slot for integrated SCSI controller */ mca_dev->pos_id = MCA_INTEGSCSI_POS; mca_dev->slot = MCA_INTEGSCSI; mca_dev->pos_register = which_scsi; mca_register_device(MCA_PRIMARY_BUS, mca_dev); } /* Turn off motherboard setup */ outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG); /* Now loop over MCA slots: put each adapter into setup mode, and * read its POS registers. Then put adapter setup off. */ for(i=0; i<MCA_MAX_SLOT_NR; i++) { outb_p(0x8|(i&0xf), MCA_ADAPTER_SETUP_REG); if(!mca_read_and_store_pos(pos)) continue; mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC); if(unlikely(!mca_dev)) goto out_unlock_nomem; for(j=0; j<8; j++) mca_dev->pos[j]=pos[j]; mca_dev->driver_loaded = 0; mca_dev->slot = i; mca_dev->pos_register = 0; mca_configure_adapter_status(mca_dev); mca_register_device(MCA_PRIMARY_BUS, mca_dev); } outb_p(0, MCA_ADAPTER_SETUP_REG); /* Enable interrupts and return memory start */ spin_unlock_irq(&mca_lock); for (i = 0; i < MCA_STANDARD_RESOURCES; i++) request_resource(&ioport_resource, mca_standard_resources + i); mca_do_proc_init(); return 0; out_unlock_nomem: spin_unlock_irq(&mca_lock); out_nomem: printk(KERN_EMERG "Failed memory allocation in MCA setup!\n"); return -ENOMEM; } subsys_initcall(mca_init); /*--------------------------------------------------------------------*/ static __kprobes void mca_handle_nmi_device(struct mca_device *mca_dev, int check_flag) { int slot = mca_dev->slot; if(slot == MCA_INTEGSCSI) { printk(KERN_CRIT "NMI: caused by MCA integrated SCSI adapter (%s)\n", mca_dev->name); } else if(slot == MCA_INTEGVIDEO) { printk(KERN_CRIT "NMI: caused by MCA integrated video adapter (%s)\n", mca_dev->name); } else if(slot == MCA_MOTHERBOARD) { printk(KERN_CRIT "NMI: caused by motherboard (%s)\n", mca_dev->name); } /* More info available in POS 6 and 7? */ if(check_flag) { unsigned char pos6, pos7; pos6 = mca_device_read_pos(mca_dev, 6); pos7 = mca_device_read_pos(mca_dev, 7); printk(KERN_CRIT "NMI: POS 6 = 0x%x, POS 7 = 0x%x\n", pos6, pos7); } } /* mca_handle_nmi_slot */ /*--------------------------------------------------------------------*/ static int __kprobes mca_handle_nmi_callback(struct device *dev, void *data) { struct mca_device *mca_dev = to_mca_device(dev); unsigned char pos5; pos5 = mca_device_read_pos(mca_dev, 5); if(!(pos5 & 0x80)) { /* Bit 7 of POS 5 is reset when this adapter has a hardware * error. Bit 7 it reset if there's error information * available in POS 6 and 7. */ mca_handle_nmi_device(mca_dev, !(pos5 & 0x40)); return 1; } return 0; } void __kprobes mca_handle_nmi(void) { /* First try - scan the various adapters and see if a specific * adapter was responsible for the error. */ bus_for_each_dev(&mca_bus_type, NULL, NULL, mca_handle_nmi_callback); mca_nmi_hook(); } /* mca_handle_nmi */