/* * linux/arch/arm/mach-sa1100/shannon.c */ #include <linux/init.h> #include <linux/device.h> #include <linux/kernel.h> #include <linux/tty.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/setup.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/map.h> #include <asm/mach/serial_sa1100.h> #include <mach/mcp.h> #include <mach/shannon.h> #include "generic.h" static struct mtd_partition shannon_partitions[] = { { .name = "BLOB boot loader", .offset = 0, .size = 0x20000 }, { .name = "kernel", .offset = MTDPART_OFS_APPEND, .size = 0xe0000 }, { .name = "initrd", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL } }; static struct flash_platform_data shannon_flash_data = { .map_name = "cfi_probe", .parts = shannon_partitions, .nr_parts = ARRAY_SIZE(shannon_partitions), }; static struct resource shannon_flash_resource = { .start = SA1100_CS0_PHYS, .end = SA1100_CS0_PHYS + SZ_4M - 1, .flags = IORESOURCE_MEM, }; static struct mcp_plat_data shannon_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, }; static void __init shannon_init(void) { sa11x0_set_flash_data(&shannon_flash_data, &shannon_flash_resource, 1); sa11x0_set_mcp_data(&shannon_mcp_data); } static void __init shannon_map_io(void) { sa1100_map_io(); sa1100_register_uart(0, 3); sa1100_register_uart(1, 1); Ser1SDCR0 |= SDCR0_SUS; GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD); GPDR |= GPIO_UART_TXD | SHANNON_GPIO_CODEC_RESET; GPDR &= ~GPIO_UART_RXD; PPAR |= PPAR_UPR; /* reset the codec */ GPCR = SHANNON_GPIO_CODEC_RESET; GPSR = SHANNON_GPIO_CODEC_RESET; } MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)") .phys_io = 0x80000000, .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, .boot_params = 0xc0000100, .map_io = shannon_map_io, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = shannon_init, MACHINE_END