/*
 * OMAP Power Management debug routines
 *
 * Copyright (C) 2005 Texas Instruments, Inc.
 * Copyright (C) 2006-2008 Nokia Corporation
 *
 * Written by:
 * Richard Woodruff <r-woodruff2@ti.com>
 * Tony Lindgren
 * Juha Yrjola
 * Amit Kucheria <amit.kucheria@nokia.com>
 * Igor Stoppa <igor.stoppa@nokia.com>
 * Jouni Hogander
 *
 * Based on pm.c for omap2
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>

#include <mach/clock.h>
#include <mach/board.h>

#include "prm.h"
#include "cm.h"
#include "pm.h"

int omap2_pm_debug;

#define DUMP_PRM_MOD_REG(mod, reg)    \
	regs[reg_count].name = #mod "." #reg; \
	regs[reg_count++].val = prm_read_mod_reg(mod, reg)
#define DUMP_CM_MOD_REG(mod, reg)     \
	regs[reg_count].name = #mod "." #reg; \
	regs[reg_count++].val = cm_read_mod_reg(mod, reg)
#define DUMP_PRM_REG(reg) \
	regs[reg_count].name = #reg; \
	regs[reg_count++].val = __raw_readl(reg)
#define DUMP_CM_REG(reg) \
	regs[reg_count].name = #reg; \
	regs[reg_count++].val = __raw_readl(reg)
#define DUMP_INTC_REG(reg, off) \
	regs[reg_count].name = #reg; \
	regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off)))

void omap2_pm_dump(int mode, int resume, unsigned int us)
{
	struct reg {
		const char *name;
		u32 val;
	} regs[32];
	int reg_count = 0, i;
	const char *s1 = NULL, *s2 = NULL;

	if (!resume) {
#if 0
		/* MPU */
		DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET);
		DUMP_CM_MOD_REG(MPU_MOD, CM_CLKSTCTRL);
		DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTCTRL);
		DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTST);
		DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP);
#endif
#if 0
		/* INTC */
		DUMP_INTC_REG(INTC_MIR0, 0x0084);
		DUMP_INTC_REG(INTC_MIR1, 0x00a4);
		DUMP_INTC_REG(INTC_MIR2, 0x00c4);
#endif
#if 0
		DUMP_CM_MOD_REG(CORE_MOD, CM_FCLKEN1);
		if (cpu_is_omap24xx()) {
			DUMP_CM_MOD_REG(CORE_MOD, OMAP24XX_CM_FCLKEN2);
			DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
					OMAP2_PRCM_CLKEMUL_CTRL_OFFSET);
			DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
					OMAP2_PRCM_CLKSRC_CTRL_OFFSET);
		}
		DUMP_CM_MOD_REG(WKUP_MOD, CM_FCLKEN);
		DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN1);
		DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN2);
		DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN);
		DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN);
		DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE);
		DUMP_PRM_MOD_REG(CORE_MOD, PM_PWSTST);
#endif
#if 0
		/* DSP */
		if (cpu_is_omap24xx()) {
			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_FCLKEN);
			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_ICLKEN);
			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST);
			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE);
			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL);
			DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSTCTRL);
			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTCTRL);
			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTST);
			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTCTRL);
			DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTST);
		}
#endif
	} else {
		DUMP_PRM_MOD_REG(CORE_MOD, PM_WKST1);
		if (cpu_is_omap24xx())
			DUMP_PRM_MOD_REG(CORE_MOD, OMAP24XX_PM_WKST2);
		DUMP_PRM_MOD_REG(WKUP_MOD, PM_WKST);
		DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
#if 1
		DUMP_INTC_REG(INTC_PENDING_IRQ0, 0x0098);
		DUMP_INTC_REG(INTC_PENDING_IRQ1, 0x00b8);
		DUMP_INTC_REG(INTC_PENDING_IRQ2, 0x00d8);
#endif
	}

	switch (mode) {
	case 0:
		s1 = "full";
		s2 = "retention";
		break;
	case 1:
		s1 = "MPU";
		s2 = "retention";
		break;
	case 2:
		s1 = "MPU";
		s2 = "idle";
		break;
	}

	if (!resume)
#ifdef CONFIG_NO_HZ
		printk(KERN_INFO
		       "--- Going to %s %s (next timer after %u ms)\n", s1, s2,
		       jiffies_to_msecs(get_next_timer_interrupt(jiffies) -
					jiffies));
#else
		printk(KERN_INFO "--- Going to %s %s\n", s1, s2);
#endif
	else
		printk(KERN_INFO "--- Woke up (slept for %u.%03u ms)\n",
			us / 1000, us % 1000);

	for (i = 0; i < reg_count; i++)
		printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
}