/* * * QNAP TS-11x/TS-21x Turbo NAS Board Setup * * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com> * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/mv643xx_eth.h> #include <linux/ata_platform.h> #include <linux/gpio_keys.h> #include <linux/input.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/kirkwood.h> #include "common.h" #include "mpp.h" #include "tsx1x-common.h" static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = { I2C_BOARD_INFO("s35390a", 0x30), }; static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; static struct mv_sata_platform_data qnap_ts219_sata_data = { .n_ports = 2, }; static struct gpio_keys_button qnap_ts219_buttons[] = { { .code = KEY_COPY, .gpio = 15, .desc = "USB Copy", .active_low = 1, }, { .code = KEY_RESTART, .gpio = 16, .desc = "Reset", .active_low = 1, }, }; static struct gpio_keys_platform_data qnap_ts219_button_data = { .buttons = qnap_ts219_buttons, .nbuttons = ARRAY_SIZE(qnap_ts219_buttons), }; static struct platform_device qnap_ts219_button_device = { .name = "gpio-keys", .id = -1, .num_resources = 0, .dev = { .platform_data = &qnap_ts219_button_data, } }; static unsigned int qnap_ts219_mpp_config[] __initdata = { MPP0_SPI_SCn, MPP1_SPI_MOSI, MPP2_SPI_SCK, MPP3_SPI_MISO, MPP4_SATA1_ACTn, MPP5_SATA0_ACTn, MPP8_TW0_SDA, MPP9_TW0_SCK, MPP10_UART0_TXD, MPP11_UART0_RXD, MPP13_UART1_TXD, /* PIC controller */ MPP14_UART1_RXD, /* PIC controller */ MPP15_GPIO, /* USB Copy button (on devices with 88F6281) */ MPP16_GPIO, /* Reset button (on devices with 88F6281) */ MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */ MPP37_GPIO, /* Reset button (on devices with 88F6282) */ MPP43_GPIO, /* USB Copy button (on devices with 88F6282) */ MPP44_GPIO, /* Board ID: 0: TS-11x, 1: TS-21x */ 0 }; static void __init qnap_ts219_init(void) { u32 dev, rev; /* * Basic setup. Needs to be called early. */ kirkwood_init(); kirkwood_mpp_conf(qnap_ts219_mpp_config); kirkwood_uart0_init(); kirkwood_uart1_init(); /* A PIC controller is connected here. */ qnap_tsx1x_register_flash(); kirkwood_i2c_init(); i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1); kirkwood_pcie_id(&dev, &rev); if (dev == MV88F6282_DEV_ID) { qnap_ts219_buttons[0].gpio = 43; /* USB Copy button */ qnap_ts219_buttons[1].gpio = 37; /* Reset button */ qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); } kirkwood_ge00_init(&qnap_ts219_ge00_data); kirkwood_sata_init(&qnap_ts219_sata_data); kirkwood_ehci_init(); platform_device_register(&qnap_ts219_button_device); pm_power_off = qnap_tsx1x_power_off; } static int __init ts219_pci_init(void) { if (machine_is_ts219()) kirkwood_pcie_init(KW_PCIE0); return 0; } subsys_initcall(ts219_pci_init); MACHINE_START(TS219, "QNAP TS-119/TS-219") /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */ .boot_params = 0x00000100, .init_machine = qnap_ts219_init, .map_io = kirkwood_map_io, .init_irq = kirkwood_init_irq, .timer = &kirkwood_timer, MACHINE_END