Overview of the Linux Virtual File System Original author: Richard Gooch <rgooch@atnf.csiro.au> Last updated on October 28, 2005 Copyright (C) 1999 Richard Gooch Copyright (C) 2005 Pekka Enberg This file is released under the GPLv2. Introduction ============ The Virtual File System (also known as the Virtual Filesystem Switch) is the software layer in the kernel that provides the filesystem interface to userspace programs. It also provides an abstraction within the kernel which allows different filesystem implementations to coexist. VFS system calls open(2), stat(2), read(2), write(2), chmod(2) and so on are called from a process context. Filesystem locking is described in the document Documentation/filesystems/Locking. Directory Entry Cache (dcache) ------------------------------ The VFS implements the open(2), stat(2), chmod(2), and similar system calls. The pathname argument that is passed to them is used by the VFS to search through the directory entry cache (also known as the dentry cache or dcache). This provides a very fast look-up mechanism to translate a pathname (filename) into a specific dentry. Dentries live in RAM and are never saved to disc: they exist only for performance. The dentry cache is meant to be a view into your entire filespace. As most computers cannot fit all dentries in the RAM at the same time, some bits of the cache are missing. In order to resolve your pathname into a dentry, the VFS may have to resort to creating dentries along the way, and then loading the inode. This is done by looking up the inode. The Inode Object ---------------- An individual dentry usually has a pointer to an inode. Inodes are filesystem objects such as regular files, directories, FIFOs and other beasts. They live either on the disc (for block device filesystems) or in the memory (for pseudo filesystems). Inodes that live on the disc are copied into the memory when required and changes to the inode are written back to disc. A single inode can be pointed to by multiple dentries (hard links, for example, do this). To look up an inode requires that the VFS calls the lookup() method of the parent directory inode. This method is installed by the specific filesystem implementation that the inode lives in. Once the VFS has the required dentry (and hence the inode), we can do all those boring things like open(2) the file, or stat(2) it to peek at the inode data. The stat(2) operation is fairly simple: once the VFS has the dentry, it peeks at the inode data and passes some of it back to userspace. The File Object --------------- Opening a file requires another operation: allocation of a file structure (this is the kernel-side implementation of file descriptors). The freshly allocated file structure is initialized with a pointer to the dentry and a set of file operation member functions. These are taken from the inode data. The open() file method is then called so the specific filesystem implementation can do it's work. You can see that this is another switch performed by the VFS. The file structure is placed into the file descriptor table for the process. Reading, writing and closing files (and other assorted VFS operations) is done by using the userspace file descriptor to grab the appropriate file structure, and then calling the required file structure method to do whatever is required. For as long as the file is open, it keeps the dentry in use, which in turn means that the VFS inode is still in use. Registering and Mounting a Filesystem ===================================== To register and unregister a filesystem, use the following API functions: #include <linux/fs.h> extern int register_filesystem(struct file_system_type *); extern int unregister_filesystem(struct file_system_type *); The passed struct file_system_type describes your filesystem. When a request is made to mount a device onto a directory in your filespace, the VFS will call the appropriate get_sb() method for the specific filesystem. The dentry for the mount point will then be updated to point to the root inode for the new filesystem. You can see all filesystems that are registered to the kernel in the file /proc/filesystems. struct file_system_type ----------------------- This describes the filesystem. As of kernel 2.6.13, the following members are defined: struct file_system_type { const char *name; int fs_flags; int (*get_sb) (struct file_system_type *, int, const char *, void *, struct vfsmount *); void (*kill_sb) (struct super_block *); struct module *owner; struct file_system_type * next; struct list_head fs_supers; }; name: the name of the filesystem type, such as "ext2", "iso9660", "msdos" and so on fs_flags: various flags (i.e. FS_REQUIRES_DEV, FS_NO_DCACHE, etc.) get_sb: the method to call when a new instance of this filesystem should be mounted kill_sb: the method to call when an instance of this filesystem should be unmounted owner: for internal VFS use: you should initialize this to THIS_MODULE in most cases. next: for internal VFS use: you should initialize this to NULL The get_sb() method has the following arguments: struct super_block *sb: the superblock structure. This is partially initialized by the VFS and the rest must be initialized by the get_sb() method int flags: mount flags const char *dev_name: the device name we are mounting. void *data: arbitrary mount options, usually comes as an ASCII string int silent: whether or not to be silent on error The get_sb() method must determine if the block device specified in the superblock contains a filesystem of the type the method supports. On success the method returns the superblock pointer, on failure it returns NULL. The most interesting member of the superblock structure that the get_sb() method fills in is the "s_op" field. This is a pointer to a "struct super_operations" which describes the next level of the filesystem implementation. Usually, a filesystem uses one of the generic get_sb() implementations and provides a fill_super() method instead. The generic methods are: get_sb_bdev: mount a filesystem residing on a block device get_sb_nodev: mount a filesystem that is not backed by a device get_sb_single: mount a filesystem which shares the instance between all mounts A fill_super() method implementation has the following arguments: struct super_block *sb: the superblock structure. The method fill_super() must initialize this properly. void *data: arbitrary mount options, usually comes as an ASCII string int silent: whether or not to be silent on error The Superblock Object ===================== A superblock object represents a mounted filesystem. struct super_operations ----------------------- This describes how the VFS can manipulate the superblock of your filesystem. As of kernel 2.6.13, the following members are defined: struct super_operations { struct inode *(*alloc_inode)(struct super_block *sb); void (*destroy_inode)(struct inode *); void (*read_inode) (struct inode *); void (*dirty_inode) (struct inode *); int (*write_inode) (struct inode *, int); void (*put_inode) (struct inode *); void (*drop_inode) (struct inode *); void (*delete_inode) (struct inode *); void (*put_super) (struct super_block *); void (*write_super) (struct super_block *); int (*sync_fs)(struct super_block *sb, int wait); void (*write_super_lockfs) (struct super_block *); void (*unlockfs) (struct super_block *); int (*statfs) (struct dentry *, struct kstatfs *); int (*remount_fs) (struct super_block *, int *, char *); void (*clear_inode) (struct inode *); void (*umount_begin) (struct super_block *); void (*sync_inodes) (struct super_block *sb, struct writeback_control *wbc); int (*show_options)(struct seq_file *, struct vfsmount *); ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t); ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t); }; All methods are called without any locks being held, unless otherwise noted. This means that most methods can block safely. All methods are only called from a process context (i.e. not from an interrupt handler or bottom half). alloc_inode: this method is called by inode_alloc() to allocate memory for struct inode and initialize it. If this function is not defined, a simple 'struct inode' is allocated. Normally alloc_inode will be used to allocate a larger structure which contains a 'struct inode' embedded within it. destroy_inode: this method is called by destroy_inode() to release resources allocated for struct inode. It is only required if ->alloc_inode was defined and simply undoes anything done by ->alloc_inode. read_inode: this method is called to read a specific inode from the mounted filesystem. The i_ino member in the struct inode is initialized by the VFS to indicate which inode to read. Other members are filled in by this method. You can set this to NULL and use iget5_locked() instead of iget() to read inodes. This is necessary for filesystems for which the inode number is not sufficient to identify an inode. dirty_inode: this method is called by the VFS to mark an inode dirty. write_inode: this method is called when the VFS needs to write an inode to disc. The second parameter indicates whether the write should be synchronous or not, not all filesystems check this flag. put_inode: called when the VFS inode is removed from the inode cache. drop_inode: called when the last access to the inode is dropped, with the inode_lock spinlock held. This method should be either NULL (normal UNIX filesystem semantics) or "generic_delete_inode" (for filesystems that do not want to cache inodes - causing "delete_inode" to always be called regardless of the value of i_nlink) The "generic_delete_inode()" behavior is equivalent to the old practice of using "force_delete" in the put_inode() case, but does not have the races that the "force_delete()" approach had. delete_inode: called when the VFS wants to delete an inode put_super: called when the VFS wishes to free the superblock (i.e. unmount). This is called with the superblock lock held write_super: called when the VFS superblock needs to be written to disc. This method is optional sync_fs: called when VFS is writing out all dirty data associated with a superblock. The second parameter indicates whether the method should wait until the write out has been completed. Optional. write_super_lockfs: called when VFS is locking a filesystem and forcing it into a consistent state. This method is currently used by the Logical Volume Manager (LVM). unlockfs: called when VFS is unlocking a filesystem and making it writable again. statfs: called when the VFS needs to get filesystem statistics. This is called with the kernel lock held remount_fs: called when the filesystem is remounted. This is called with the kernel lock held clear_inode: called then the VFS clears the inode. Optional umount_begin: called when the VFS is unmounting a filesystem. sync_inodes: called when the VFS is writing out dirty data associated with a superblock. show_options: called by the VFS to show mount options for /proc/<pid>/mounts. quota_read: called by the VFS to read from filesystem quota file. quota_write: called by the VFS to write to filesystem quota file. The read_inode() method is responsible for filling in the "i_op" field. This is a pointer to a "struct inode_operations" which describes the methods that can be performed on individual inodes. The Inode Object ================ An inode object represents an object within the filesystem. struct inode_operations ----------------------- This describes how the VFS can manipulate an inode in your filesystem. As of kernel 2.6.13, the following members are defined: struct inode_operations { int (*create) (struct inode *,struct dentry *,int, struct nameidata *); struct dentry * (*lookup) (struct inode *,struct dentry *, struct nameidata *); int (*link) (struct dentry *,struct inode *,struct dentry *); int (*unlink) (struct inode *,struct dentry *); int (*symlink) (struct inode *,struct dentry *,const char *); int (*mkdir) (struct inode *,struct dentry *,int); int (*rmdir) (struct inode *,struct dentry *); int (*mknod) (struct inode *,struct dentry *,int,dev_t); int (*rename) (struct inode *, struct dentry *, struct inode *, struct dentry *); int (*readlink) (struct dentry *, char __user *,int); void * (*follow_link) (struct dentry *, struct nameidata *); void (*put_link) (struct dentry *, struct nameidata *, void *); void (*truncate) (struct inode *); int (*permission) (struct inode *, int, struct nameidata *); int (*setattr) (struct dentry *, struct iattr *); int (*getattr) (struct vfsmount *mnt, struct dentry *, struct kstat *); int (*setxattr) (struct dentry *, const char *,const void *,size_t,int); ssize_t (*getxattr) (struct dentry *, const char *, void *, size_t); ssize_t (*listxattr) (struct dentry *, char *, size_t); int (*removexattr) (struct dentry *, const char *); }; Again, all methods are called without any locks being held, unless otherwise noted. create: called by the open(2) and creat(2) system calls. Only required if you want to support regular files. The dentry you get should not have an inode (i.e. it should be a negative dentry). Here you will probably call d_instantiate() with the dentry and the newly created inode lookup: called when the VFS needs to look up an inode in a parent directory. The name to look for is found in the dentry. This method must call d_add() to insert the found inode into the dentry. The "i_count" field in the inode structure should be incremented. If the named inode does not exist a NULL inode should be inserted into the dentry (this is called a negative dentry). Returning an error code from this routine must only be done on a real error, otherwise creating inodes with system calls like create(2), mknod(2), mkdir(2) and so on will fail. If you wish to overload the dentry methods then you should initialise the "d_dop" field in the dentry; this is a pointer to a struct "dentry_operations". This method is called with the directory inode semaphore held link: called by the link(2) system call. Only required if you want to support hard links. You will probably need to call d_instantiate() just as you would in the create() method unlink: called by the unlink(2) system call. Only required if you want to support deleting inodes symlink: called by the symlink(2) system call. Only required if you want to support symlinks. You will probably need to call d_instantiate() just as you would in the create() method mkdir: called by the mkdir(2) system call. Only required if you want to support creating subdirectories. You will probably need to call d_instantiate() just as you would in the create() method rmdir: called by the rmdir(2) system call. Only required if you want to support deleting subdirectories mknod: called by the mknod(2) system call to create a device (char, block) inode or a named pipe (FIFO) or socket. Only required if you want to support creating these types of inodes. You will probably need to call d_instantiate() just as you would in the create() method rename: called by the rename(2) system call to rename the object to have the parent and name given by the second inode and dentry. readlink: called by the readlink(2) system call. Only required if you want to support reading symbolic links follow_link: called by the VFS to follow a symbolic link to the inode it points to. Only required if you want to support symbolic links. This method returns a void pointer cookie that is passed to put_link(). put_link: called by the VFS to release resources allocated by follow_link(). The cookie returned by follow_link() is passed to this method as the last parameter. It is used by filesystems such as NFS where page cache is not stable (i.e. page that was installed when the symbolic link walk started might not be in the page cache at the end of the walk). truncate: called by the VFS to change the size of a file. The i_size field of the inode is set to the desired size by the VFS before this method is called. This method is called by the truncate(2) system call and related functionality. permission: called by the VFS to check for access rights on a POSIX-like filesystem. setattr: called by the VFS to set attributes for a file. This method is called by chmod(2) and related system calls. getattr: called by the VFS to get attributes of a file. This method is called by stat(2) and related system calls. setxattr: called by the VFS to set an extended attribute for a file. Extended attribute is a name:value pair associated with an inode. This method is called by setxattr(2) system call. getxattr: called by the VFS to retrieve the value of an extended attribute name. This method is called by getxattr(2) function call. listxattr: called by the VFS to list all extended attributes for a given file. This method is called by listxattr(2) system call. removexattr: called by the VFS to remove an extended attribute from a file. This method is called by removexattr(2) system call. The Address Space Object ======================== The address space object is used to group and manage pages in the page cache. It can be used to keep track of the pages in a file (or anything else) and also track the mapping of sections of the file into process address spaces. There are a number of distinct yet related services that an address-space can provide. These include communicating memory pressure, page lookup by address, and keeping track of pages tagged as Dirty or Writeback. The first can be used independently to the others. The VM can try to either write dirty pages in order to clean them, or release clean pages in order to reuse them. To do this it can call the ->writepage method on dirty pages, and ->releasepage on clean pages with PagePrivate set. Clean pages without PagePrivate and with no external references will be released without notice being given to the address_space. To achieve this functionality, pages need to be placed on an LRU with lru_cache_add and mark_page_active needs to be called whenever the page is used. Pages are normally kept in a radix tree index by ->index. This tree maintains information about the PG_Dirty and PG_Writeback status of each page, so that pages with either of these flags can be found quickly. The Dirty tag is primarily used by mpage_writepages - the default ->writepages method. It uses the tag to find dirty pages to call ->writepage on. If mpage_writepages is not used (i.e. the address provides its own ->writepages) , the PAGECACHE_TAG_DIRTY tag is almost unused. write_inode_now and sync_inode do use it (through __sync_single_inode) to check if ->writepages has been successful in writing out the whole address_space. The Writeback tag is used by filemap*wait* and sync_page* functions, via wait_on_page_writeback_range, to wait for all writeback to complete. While waiting ->sync_page (if defined) will be called on each page that is found to require writeback. An address_space handler may attach extra information to a page, typically using the 'private' field in the 'struct page'. If such information is attached, the PG_Private flag should be set. This will cause various VM routines to make extra calls into the address_space handler to deal with that data. An address space acts as an intermediate between storage and application. Data is read into the address space a whole page at a time, and provided to the application either by copying of the page, or by memory-mapping the page. Data is written into the address space by the application, and then written-back to storage typically in whole pages, however the address_space has finer control of write sizes. The read process essentially only requires 'readpage'. The write process is more complicated and uses prepare_write/commit_write or set_page_dirty to write data into the address_space, and writepage, sync_page, and writepages to writeback data to storage. Adding and removing pages to/from an address_space is protected by the inode's i_mutex. When data is written to a page, the PG_Dirty flag should be set. It typically remains set until writepage asks for it to be written. This should clear PG_Dirty and set PG_Writeback. It can be actually written at any point after PG_Dirty is clear. Once it is known to be safe, PG_Writeback is cleared. Writeback makes use of a writeback_control structure... struct address_space_operations ------------------------------- This describes how the VFS can manipulate mapping of a file to page cache in your filesystem. As of kernel 2.6.16, the following members are defined: struct address_space_operations { int (*writepage)(struct page *page, struct writeback_control *wbc); int (*readpage)(struct file *, struct page *); int (*sync_page)(struct page *); int (*writepages)(struct address_space *, struct writeback_control *); int (*set_page_dirty)(struct page *page); int (*readpages)(struct file *filp, struct address_space *mapping, struct list_head *pages, unsigned nr_pages); int (*prepare_write)(struct file *, struct page *, unsigned, unsigned); int (*commit_write)(struct file *, struct page *, unsigned, unsigned); sector_t (*bmap)(struct address_space *, sector_t); int (*invalidatepage) (struct page *, unsigned long); int (*releasepage) (struct page *, int); ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov, loff_t offset, unsigned long nr_segs); struct page* (*get_xip_page)(struct address_space *, sector_t, int); /* migrate the contents of a page to the specified target */ int (*migratepage) (struct page *, struct page *); }; writepage: called by the VM to write a dirty page to backing store. This may happen for data integrity reasons (i.e. 'sync'), or to free up memory (flush). The difference can be seen in wbc->sync_mode. The PG_Dirty flag has been cleared and PageLocked is true. writepage should start writeout, should set PG_Writeback, and should make sure the page is unlocked, either synchronously or asynchronously when the write operation completes. If wbc->sync_mode is WB_SYNC_NONE, ->writepage doesn't have to try too hard if there are problems, and may choose to write out other pages from the mapping if that is easier (e.g. due to internal dependencies). If it chooses not to start writeout, it should return AOP_WRITEPAGE_ACTIVATE so that the VM will not keep calling ->writepage on that page. See the file "Locking" for more details. readpage: called by the VM to read a page from backing store. The page will be Locked when readpage is called, and should be unlocked and marked uptodate once the read completes. If ->readpage discovers that it needs to unlock the page for some reason, it can do so, and then return AOP_TRUNCATED_PAGE. In this case, the page will be relocated, relocked and if that all succeeds, ->readpage will be called again. sync_page: called by the VM to notify the backing store to perform all queued I/O operations for a page. I/O operations for other pages associated with this address_space object may also be performed. This function is optional and is called only for pages with PG_Writeback set while waiting for the writeback to complete. writepages: called by the VM to write out pages associated with the address_space object. If wbc->sync_mode is WBC_SYNC_ALL, then the writeback_control will specify a range of pages that must be written out. If it is WBC_SYNC_NONE, then a nr_to_write is given and that many pages should be written if possible. If no ->writepages is given, then mpage_writepages is used instead. This will choose pages from the address space that are tagged as DIRTY and will pass them to ->writepage. set_page_dirty: called by the VM to set a page dirty. This is particularly needed if an address space attaches private data to a page, and that data needs to be updated when a page is dirtied. This is called, for example, when a memory mapped page gets modified. If defined, it should set the PageDirty flag, and the PAGECACHE_TAG_DIRTY tag in the radix tree. readpages: called by the VM to read pages associated with the address_space object. This is essentially just a vector version of readpage. Instead of just one page, several pages are requested. readpages is only used for read-ahead, so read errors are ignored. If anything goes wrong, feel free to give up. prepare_write: called by the generic write path in VM to set up a write request for a page. This indicates to the address space that the given range of bytes is about to be written. The address_space should check that the write will be able to complete, by allocating space if necessary and doing any other internal housekeeping. If the write will update parts of any basic-blocks on storage, then those blocks should be pre-read (if they haven't been read already) so that the updated blocks can be written out properly. The page will be locked. If prepare_write wants to unlock the page it, like readpage, may do so and return AOP_TRUNCATED_PAGE. In this case the prepare_write will be retried one the lock is regained. commit_write: If prepare_write succeeds, new data will be copied into the page and then commit_write will be called. It will typically update the size of the file (if appropriate) and mark the inode as dirty, and do any other related housekeeping operations. It should avoid returning an error if possible - errors should have been handled by prepare_write. bmap: called by the VFS to map a logical block offset within object to physical block number. This method is used by the FIBMAP ioctl and for working with swap-files. To be able to swap to a file, the file must have a stable mapping to a block device. The swap system does not go through the filesystem but instead uses bmap to find out where the blocks in the file are and uses those addresses directly. invalidatepage: If a page has PagePrivate set, then invalidatepage will be called when part or all of the page is to be removed from the address space. This generally corresponds to either a truncation or a complete invalidation of the address space (in the latter case 'offset' will always be 0). Any private data associated with the page should be updated to reflect this truncation. If offset is 0, then the private data should be released, because the page must be able to be completely discarded. This may be done by calling the ->releasepage function, but in this case the release MUST succeed. releasepage: releasepage is called on PagePrivate pages to indicate that the page should be freed if possible. ->releasepage should remove any private data from the page and clear the PagePrivate flag. It may also remove the page from the address_space. If this fails for some reason, it may indicate failure with a 0 return value. This is used in two distinct though related cases. The first is when the VM finds a clean page with no active users and wants to make it a free page. If ->releasepage succeeds, the page will be removed from the address_space and become free. The second case if when a request has been made to invalidate some or all pages in an address_space. This can happen through the fadvice(POSIX_FADV_DONTNEED) system call or by the filesystem explicitly requesting it as nfs and 9fs do (when they believe the cache may be out of date with storage) by calling invalidate_inode_pages2(). If the filesystem makes such a call, and needs to be certain that all pages are invalidated, then its releasepage will need to ensure this. Possibly it can clear the PageUptodate bit if it cannot free private data yet. direct_IO: called by the generic read/write routines to perform direct_IO - that is IO requests which bypass the page cache and transfer data directly between the storage and the application's address space. get_xip_page: called by the VM to translate a block number to a page. The page is valid until the corresponding filesystem is unmounted. Filesystems that want to use execute-in-place (XIP) need to implement it. An example implementation can be found in fs/ext2/xip.c. migrate_page: This is used to compact the physical memory usage. If the VM wants to relocate a page (maybe off a memory card that is signalling imminent failure) it will pass a new page and an old page to this function. migrate_page should transfer any private data across and update any references that it has to the page. The File Object =============== A file object represents a file opened by a process. struct file_operations ---------------------- This describes how the VFS can manipulate an open file. As of kernel 2.6.17, the following members are defined: struct file_operations { loff_t (*llseek) (struct file *, loff_t, int); ssize_t (*read) (struct file *, char __user *, size_t, loff_t *); ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *); ssize_t (*aio_read) (struct kiocb *, const struct iovec *, unsigned long, loff_t); ssize_t (*aio_write) (struct kiocb *, const struct iovec *, unsigned long, loff_t); int (*readdir) (struct file *, void *, filldir_t); unsigned int (*poll) (struct file *, struct poll_table_struct *); int (*ioctl) (struct inode *, struct file *, unsigned int, unsigned long); long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long); long (*compat_ioctl) (struct file *, unsigned int, unsigned long); int (*mmap) (struct file *, struct vm_area_struct *); int (*open) (struct inode *, struct file *); int (*flush) (struct file *); int (*release) (struct inode *, struct file *); int (*fsync) (struct file *, struct dentry *, int datasync); int (*aio_fsync) (struct kiocb *, int datasync); int (*fasync) (int, struct file *, int); int (*lock) (struct file *, int, struct file_lock *); ssize_t (*readv) (struct file *, const struct iovec *, unsigned long, loff_t *); ssize_t (*writev) (struct file *, const struct iovec *, unsigned long, loff_t *); ssize_t (*sendfile) (struct file *, loff_t *, size_t, read_actor_t, void *); ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int); unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long); int (*check_flags)(int); int (*dir_notify)(struct file *filp, unsigned long arg); int (*flock) (struct file *, int, struct file_lock *); ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, size_t, unsigned int); ssize_t (*splice_read)(struct file *, struct pipe_inode_info *, size_t, unsigned int); }; Again, all methods are called without any locks being held, unless otherwise noted. llseek: called when the VFS needs to move the file position index read: called by read(2) and related system calls aio_read: called by io_submit(2) and other asynchronous I/O operations write: called by write(2) and related system calls aio_write: called by io_submit(2) and other asynchronous I/O operations readdir: called when the VFS needs to read the directory contents poll: called by the VFS when a process wants to check if there is activity on this file and (optionally) go to sleep until there is activity. Called by the select(2) and poll(2) system calls ioctl: called by the ioctl(2) system call unlocked_ioctl: called by the ioctl(2) system call. Filesystems that do not require the BKL should use this method instead of the ioctl() above. compat_ioctl: called by the ioctl(2) system call when 32 bit system calls are used on 64 bit kernels. mmap: called by the mmap(2) system call open: called by the VFS when an inode should be opened. When the VFS opens a file, it creates a new "struct file". It then calls the open method for the newly allocated file structure. You might think that the open method really belongs in "struct inode_operations", and you may be right. I think it's done the way it is because it makes filesystems simpler to implement. The open() method is a good place to initialize the "private_data" member in the file structure if you want to point to a device structure flush: called by the close(2) system call to flush a file release: called when the last reference to an open file is closed fsync: called by the fsync(2) system call fasync: called by the fcntl(2) system call when asynchronous (non-blocking) mode is enabled for a file lock: called by the fcntl(2) system call for F_GETLK, F_SETLK, and F_SETLKW commands readv: called by the readv(2) system call writev: called by the writev(2) system call sendfile: called by the sendfile(2) system call get_unmapped_area: called by the mmap(2) system call check_flags: called by the fcntl(2) system call for F_SETFL command dir_notify: called by the fcntl(2) system call for F_NOTIFY command flock: called by the flock(2) system call splice_write: called by the VFS to splice data from a pipe to a file. This method is used by the splice(2) system call splice_read: called by the VFS to splice data from file to a pipe. This method is used by the splice(2) system call Note that the file operations are implemented by the specific filesystem in which the inode resides. When opening a device node (character or block special) most filesystems will call special support routines in the VFS which will locate the required device driver information. These support routines replace the filesystem file operations with those for the device driver, and then proceed to call the new open() method for the file. This is how opening a device file in the filesystem eventually ends up calling the device driver open() method. Directory Entry Cache (dcache) ============================== struct dentry_operations ------------------------ This describes how a filesystem can overload the standard dentry operations. Dentries and the dcache are the domain of the VFS and the individual filesystem implementations. Device drivers have no business here. These methods may be set to NULL, as they are either optional or the VFS uses a default. As of kernel 2.6.13, the following members are defined: struct dentry_operations { int (*d_revalidate)(struct dentry *, struct nameidata *); int (*d_hash) (struct dentry *, struct qstr *); int (*d_compare) (struct dentry *, struct qstr *, struct qstr *); int (*d_delete)(struct dentry *); void (*d_release)(struct dentry *); void (*d_iput)(struct dentry *, struct inode *); }; d_revalidate: called when the VFS needs to revalidate a dentry. This is called whenever a name look-up finds a dentry in the dcache. Most filesystems leave this as NULL, because all their dentries in the dcache are valid d_hash: called when the VFS adds a dentry to the hash table d_compare: called when a dentry should be compared with another d_delete: called when the last reference to a dentry is deleted. This means no-one is using the dentry, however it is still valid and in the dcache d_release: called when a dentry is really deallocated d_iput: called when a dentry loses its inode (just prior to its being deallocated). The default when this is NULL is that the VFS calls iput(). If you define this method, you must call iput() yourself Each dentry has a pointer to its parent dentry, as well as a hash list of child dentries. Child dentries are basically like files in a directory. Directory Entry Cache API -------------------------- There are a number of functions defined which permit a filesystem to manipulate dentries: dget: open a new handle for an existing dentry (this just increments the usage count) dput: close a handle for a dentry (decrements the usage count). If the usage count drops to 0, the "d_delete" method is called and the dentry is placed on the unused list if the dentry is still in its parents hash list. Putting the dentry on the unused list just means that if the system needs some RAM, it goes through the unused list of dentries and deallocates them. If the dentry has already been unhashed and the usage count drops to 0, in this case the dentry is deallocated after the "d_delete" method is called d_drop: this unhashes a dentry from its parents hash list. A subsequent call to dput() will deallocate the dentry if its usage count drops to 0 d_delete: delete a dentry. If there are no other open references to the dentry then the dentry is turned into a negative dentry (the d_iput() method is called). If there are other references, then d_drop() is called instead d_add: add a dentry to its parents hash list and then calls d_instantiate() d_instantiate: add a dentry to the alias hash list for the inode and updates the "d_inode" member. The "i_count" member in the inode structure should be set/incremented. If the inode pointer is NULL, the dentry is called a "negative dentry". This function is commonly called when an inode is created for an existing negative dentry d_lookup: look up a dentry given its parent and path name component It looks up the child of that given name from the dcache hash table. If it is found, the reference count is incremented and the dentry is returned. The caller must use d_put() to free the dentry when it finishes using it. For further information on dentry locking, please refer to the document Documentation/filesystems/dentry-locking.txt. Resources ========= (Note some of these resources are not up-to-date with the latest kernel version.) Creating Linux virtual filesystems. 2002 <http://lwn.net/Articles/13325/> The Linux Virtual File-system Layer by Neil Brown. 1999 <http://www.cse.unsw.edu.au/~neilb/oss/linux-commentary/vfs.html> A tour of the Linux VFS by Michael K. Johnson. 1996 <http://www.tldp.org/LDP/khg/HyperNews/get/fs/vfstour.html> A small trail through the Linux kernel by Andries Brouwer. 2001 <http://www.win.tue.nl/~aeb/linux/vfs/trail.html>