From 58f7d28da6994e4292ade2ac9eabebb723a9bbe6 Mon Sep 17 00:00:00 2001 From: Mengdong Lin Date: Wed, 4 Sep 2013 16:37:12 -0400 Subject: ALSA: hda - unmute pin amplifier in infoframe setup for Haswell When Gfx driver reconnects a port and transcoder, the pin amplifier will be muted. To enable sound, the pin amp need to be unmuted. This patch - moves pin amp unmuting from stream preparing to hdmi_setup_audio_infoframe(). So if port:transcoder reconnection happens during stream playback, the ELDV unsol event can stil trigger pin's amp unmuting when re-setting up audio info frame. - remove reading pin amp status before unmuting for speed-up, since pin amp should always be unmuted. - rename haswell_verify_pin_D0() to haswell_verify_D0(), since the convertor power state is also fixed here. This patch is mostly based on suggestion of David Henningsson. Cc: David Henningsson Signed-off-by: Mengdong Lin Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_hdmi.c | 36 +++++++++--------------------------- 1 file changed, 9 insertions(+), 27 deletions(-) (limited to 'sound') diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 009bcccbee7a..3a15225d6982 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -896,6 +896,11 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, if (!channels) return; + if (is_haswell(codec)) + snd_hda_codec_write(codec, pin_nid, 0, + AC_VERB_SET_AMP_GAIN_MUTE, + AMP_OUT_UNMUTE); + eld = &per_pin->sink_eld; if (!eld->monitor_present) return; @@ -1035,10 +1040,10 @@ static void hdmi_unsol_event(struct hda_codec *codec, unsigned int res) hdmi_non_intrinsic_event(codec, res); } -static void haswell_verify_pin_D0(struct hda_codec *codec, +static void haswell_verify_D0(struct hda_codec *codec, hda_nid_t cvt_nid, hda_nid_t nid) { - int pwr, lamp, ramp; + int pwr; /* For Haswell, the converter 1/2 may keep in D3 state after bootup, * thus pins could only choose converter 0 for use. Make sure the @@ -1054,25 +1059,6 @@ static void haswell_verify_pin_D0(struct hda_codec *codec, pwr = (pwr & AC_PWRST_ACTUAL) >> AC_PWRST_ACTUAL_SHIFT; snd_printd("Haswell HDMI audio: Power for pin 0x%x is now D%d\n", nid, pwr); } - - lamp = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_AMP_GAIN_MUTE, - AC_AMP_GET_LEFT | AC_AMP_GET_OUTPUT); - ramp = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_AMP_GAIN_MUTE, - AC_AMP_GET_RIGHT | AC_AMP_GET_OUTPUT); - if (lamp != ramp) { - snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE, - AC_AMP_SET_RIGHT | AC_AMP_SET_OUTPUT | lamp); - - lamp = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_AMP_GAIN_MUTE, - AC_AMP_GET_LEFT | AC_AMP_GET_OUTPUT); - ramp = snd_hda_codec_read(codec, nid, 0, - AC_VERB_GET_AMP_GAIN_MUTE, - AC_AMP_GET_RIGHT | AC_AMP_GET_OUTPUT); - snd_printd("Haswell HDMI audio: Mute after set on pin 0x%x: [0x%x 0x%x]\n", nid, lamp, ramp); - } } /* @@ -1090,7 +1076,7 @@ static int hdmi_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid, int new_pinctl = 0; if (is_haswell(codec)) - haswell_verify_pin_D0(codec, cvt_nid, pin_nid); + haswell_verify_D0(codec, cvt_nid, pin_nid); if (snd_hda_query_pin_caps(codec, pin_nid) & AC_PINCAP_HBR) { pinctl = snd_hda_codec_read(codec, pin_nid, 0, @@ -1361,13 +1347,9 @@ static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll) * changed during the stream playback */ if (is_haswell(codec) && - eld->eld_valid && !old_eld_valid && per_pin->setup) { - snd_hda_codec_write(codec, pin_nid, 0, - AC_VERB_SET_AMP_GAIN_MUTE, - AMP_OUT_UNMUTE); + eld->eld_valid && !old_eld_valid && per_pin->setup) hdmi_setup_audio_infoframe(codec, per_pin, per_pin->non_pcm); - } } mutex_unlock(&pin_eld->lock); -- cgit v1.2.2