From a9430dd8fc232cfddcfaedde1a6a915e241366a8 Mon Sep 17 00:00:00 2001 From: Jonathan Woithe Date: Fri, 16 Sep 2005 19:12:48 +0200 Subject: [ALSA] hda-codec - A new model for Fujitsu S7020 Modules: HDA Codec driver Added a new model 'fujitsu' to ALC260 config for Fujitsu S7020. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 160 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 157 insertions(+), 3 deletions(-) (limited to 'sound/pci') diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 7327deb6df9f..48356ab04579 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -57,6 +57,7 @@ enum { enum { ALC260_BASIC, ALC260_HP, + ALC260_FUJITSU_S702x, ALC260_MODEL_LAST /* last tag */ }; @@ -72,6 +73,7 @@ enum { #define PIN_VREF50 0x21 #define PIN_OUT 0x40 #define PIN_HP 0xc0 +#define PIN_HP_AMP 0x80 struct alc_spec { /* codec parameterization */ @@ -284,6 +286,54 @@ static int alc_bind_switch_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *u #define ALC_BIND_MUTE(xname,nid,indices,dir) ALC_BIND_MUTE_MONO(xname,nid,3,indices,dir) +/* + * Control of pin widget settings via the mixer. Only boolean settings are + * supported, so VrefEn can't be controlled using these functions as they + * stand. + */ +static int alc_pinctl_switch_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + return 0; +} + +static int alc_pinctl_switch_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol) +{ + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + hda_nid_t nid = kcontrol->private_value & 0xffff; + long mask = (kcontrol->private_value >> 16) & 0xff; + long *valp = ucontrol->value.integer.value; + + *valp = 0; + if (snd_hda_codec_read(codec,nid,0,AC_VERB_GET_PIN_WIDGET_CONTROL,0x00) & mask) + *valp = 1; + return 0; +} + +static int alc_pinctl_switch_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol) +{ + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + hda_nid_t nid = kcontrol->private_value & 0xffff; + long mask = (kcontrol->private_value >> 16) & 0xff; + long *valp = ucontrol->value.integer.value; + unsigned int pinctl = snd_hda_codec_read(codec,nid,0,AC_VERB_GET_PIN_WIDGET_CONTROL,0x00); + int change = ((pinctl & mask)!=0) != *valp; + + if (change) + snd_hda_codec_write(codec,nid,0,AC_VERB_SET_PIN_WIDGET_CONTROL, + *valp?(pinctl|mask):(pinctl&~mask)); + return change; +} + +#define ALC_PINCTL_SWITCH(xname, nid, mask) \ + { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0, \ + .info = alc_pinctl_switch_info, \ + .get = alc_pinctl_switch_get, \ + .put = alc_pinctl_switch_put, \ + .private_value = (nid) | (mask<<16) } /* * ALC880 3-stack model @@ -2205,6 +2255,17 @@ static struct hda_input_mux alc260_capture_source = { }, }; +/* On Fujitsu S702x laptops capture only makes sense from Mic/LineIn jack + * and the internal CD lines. + */ +static struct hda_input_mux alc260_fujitsu_capture_source = { + .num_items = 2, + .items = { + { "Mic/Line", 0x0 }, + { "CD", 0x4 }, + }, +}; + /* * This is just place-holder, so there's something for alc_build_pcms to look * at when it calculates the maximum number of channels. ALC260 has no mixer @@ -2271,6 +2332,30 @@ static snd_kcontrol_new_t alc260_hp_mixer[] = { { } /* end */ }; +static snd_kcontrol_new_t alc260_fujitsu_mixer[] = { + HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT), + ALC_BIND_MUTE("Headphone Playback Switch", 0x08, 2, HDA_INPUT), + ALC_PINCTL_SWITCH("Headphone Amp Switch", 0x14, PIN_HP_AMP), + HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), + HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT), + HDA_CODEC_VOLUME("Mic/Line Playback Volume", 0x07, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Mic/Line Playback Switch", 0x07, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Beep Playback Volume", 0x07, 0x05, HDA_INPUT), + HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT), + HDA_CODEC_VOLUME("Internal Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT), + ALC_BIND_MUTE("Internal Speaker Playback Switch", 0x09, 2, HDA_INPUT), + HDA_CODEC_VOLUME("Capture Volume", 0x04, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Capture Switch", 0x04, 0x0, HDA_INPUT), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Capture Source", + .info = alc_mux_enum_info, + .get = alc_mux_enum_get, + .put = alc_mux_enum_put, + }, + { } /* end */ +}; + static struct hda_verb alc260_init_verbs[] = { /* Line In pin widget for input */ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, @@ -2332,6 +2417,60 @@ static struct hda_verb alc260_init_verbs[] = { { } }; +/* Initialisation sequence for ALC260 as configured in Fujitsu S702x + * laptops. + */ +static struct hda_verb alc260_fujitsu_init_verbs[] = { + /* Disable all GPIOs */ + {0x01, AC_VERB_SET_GPIO_MASK, 0}, + /* Internal speaker is connected to headphone pin */ + {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + /* Headphone/Line-out jack connects to Line1 pin; make it an output */ + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + /* Mic/Line-in jack is connected to mic1 pin, so make it an input */ + {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + /* Ensure all other unused pins are disabled and muted. + * Note: trying to set widget 0x15 to anything blocks all audio + * output for some reason, so just leave that at the default. + */ + {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + /* Disable digital (SPDIF) pins */ + {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0}, + {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0}, + + /* Start with mixer outputs muted */ + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + + /* Unmute HP pin widget amp left and right (no equiv mixer ctrl) */ + {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + /* Unmute Line1 pin widget amp left and right (no equiv mixer ctrl) */ + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + /* Unmute pin widget used for Line-in (no equiv mixer ctrl) */ + {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + + /* Mute capture amp left and right */ + {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + /* Set ADC connection select to line in (on mic1 pin) */ + {0x04, AC_VERB_SET_CONNECT_SEL, 0x00}, + + /* Mute all inputs to mixer widget (even unconnected ones) */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */ +}; + static struct hda_pcm_stream alc260_pcm_analog_playback = { .substreams = 1, .channels_min = 2, @@ -2347,6 +2486,8 @@ static struct hda_pcm_stream alc260_pcm_analog_capture = { static struct hda_board_config alc260_cfg_tbl[] = { { .modelname = "hp", .config = ALC260_HP }, { .pci_subvendor = 0x103c, .config = ALC260_HP }, + { .modelname = "fujitsu", .config = ALC260_FUJITSU_S702x }, + { .pci_subvendor = 0x10cf, .pci_subdevice = 0x1326, .config = ALC260_FUJITSU_S702x }, {} }; @@ -2373,14 +2514,23 @@ static int patch_alc260(struct hda_codec *codec) spec->mixers[spec->num_mixers] = alc260_hp_mixer; spec->num_mixers++; break; + case ALC260_FUJITSU_S702x: + spec->mixers[spec->num_mixers] = alc260_fujitsu_mixer; + spec->num_mixers++; + break; default: spec->mixers[spec->num_mixers] = alc260_base_mixer; spec->num_mixers++; break; } - spec->init_verbs[0] = alc260_init_verbs; - spec->num_init_verbs = 1; + if (board_config != ALC260_FUJITSU_S702x) { + spec->init_verbs[0] = alc260_init_verbs; + spec->num_init_verbs = 1; + } else { + spec->init_verbs[0] = alc260_fujitsu_init_verbs; + spec->num_init_verbs = 1; + } spec->channel_mode = alc260_modes; spec->num_channel_mode = ARRAY_SIZE(alc260_modes); @@ -2393,7 +2543,11 @@ static int patch_alc260(struct hda_codec *codec) spec->multiout.num_dacs = ARRAY_SIZE(alc260_dac_nids); spec->multiout.dac_nids = alc260_dac_nids; - spec->input_mux = &alc260_capture_source; + if (board_config != ALC260_FUJITSU_S702x) { + spec->input_mux = &alc260_capture_source; + } else { + spec->input_mux = &alc260_fujitsu_capture_source; + } switch (board_config) { case ALC260_HP: spec->num_adc_nids = ARRAY_SIZE(alc260_hp_adc_nids); -- cgit v1.2.2