From 30b35399ceb2398d05837863476dcb12f12f3a82 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 11 Oct 2006 18:52:53 +0200 Subject: [ALSA] Various fixes for suspend/resume of ALSA PCI drivers - Check the return value of pci_enable_device() and request_irq() in the suspend. If any error occurs there, disable the device using snd_card_disconnect(). - Call pci_set_power_state() properly with pci_choose_state(). - Fix the order to call pci_set_power_state(). - Removed obsolete house-made PM codes in some drivers. Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/pci/nm256/nm256.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'sound/pci/nm256') diff --git a/sound/pci/nm256/nm256.c b/sound/pci/nm256/nm256.c index b1bbdb9e3b7b..945d21bf187e 100644 --- a/sound/pci/nm256/nm256.c +++ b/sound/pci/nm256/nm256.c @@ -1390,6 +1390,7 @@ static int nm256_suspend(struct pci_dev *pci, pm_message_t state) chip->coeffs_current = 0; pci_disable_device(pci); pci_save_state(pci); + pci_set_power_state(pci, pci_choose_state(pci, state)); return 0; } @@ -1401,8 +1402,17 @@ static int nm256_resume(struct pci_dev *pci) /* Perform a full reset on the hardware */ chip->in_resume = 1; + + pci_set_power_state(pci, PCI_D0); pci_restore_state(pci); - pci_enable_device(pci); + if (pci_enable_device(pci) < 0) { + printk(KERN_ERR "nm256: pci_enable_device failed, " + "disabling device\n"); + snd_card_disconnect(card); + return -EIO; + } + pci_set_master(pci); + snd_nm256_init_chip(chip); /* restore ac97 */ -- cgit v1.2.2