From 9a08160bdbe3148a405f72798f76e2a5d30bd243 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 12 Feb 2008 18:37:26 +0100 Subject: [ALSA] hda-codec - Add "IEC958 Default PCM" switch Added a new mixer switch to enable/disable the sharing of the default PCM stream with analog and SPDIF outputs. When "IEC958 Default PCM" switch is on, the PCM stream is routed both to analog and SPDIF outputs. This is the behavior in the earlier version. Turning this switch off has a merit for some codecs, though. Some codec chips don't support 24bit formats for SPDIF but only for analog outputs. In this case, you can use 24bit format by disabling this switch. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_via.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'sound/pci/hda/patch_via.c') diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index d9a5c6a2dd9f..3515a3fb5d9d 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -357,7 +357,8 @@ static int via_playback_pcm_open(struct hda_pcm_stream *hinfo, struct snd_pcm_substream *substream) { struct via_spec *spec = codec->spec; - return snd_hda_multi_out_analog_open(codec, &spec->multiout, substream); + return snd_hda_multi_out_analog_open(codec, &spec->multiout, substream, + hinfo); } static int via_playback_pcm_prepare(struct hda_pcm_stream *hinfo, @@ -493,6 +494,11 @@ static int via_build_controls(struct hda_codec *codec) spec->multiout.dig_out_nid); if (err < 0) return err; + err = snd_hda_create_spdif_share_sw(codec, + &spec->multiout); + if (err < 0) + return err; + spec->multiout.share_spdif = 1; } if (spec->dig_in_nid) { err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in_nid); -- cgit v1.2.2