From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- sound/oss/via82cxxx_audio.c | 3615 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 3615 insertions(+) create mode 100644 sound/oss/via82cxxx_audio.c (limited to 'sound/oss/via82cxxx_audio.c') diff --git a/sound/oss/via82cxxx_audio.c b/sound/oss/via82cxxx_audio.c new file mode 100644 index 000000000000..b387e1e52485 --- /dev/null +++ b/sound/oss/via82cxxx_audio.c @@ -0,0 +1,3615 @@ +/* + * Support for VIA 82Cxxx Audio Codecs + * Copyright 1999,2000 Jeff Garzik + * + * Updated to support the VIA 8233/8235 audio subsystem + * Alan Cox (C) Copyright 2002, 2003 Red Hat Inc + * + * Distributed under the GNU GENERAL PUBLIC LICENSE (GPL) Version 2. + * See the "COPYING" file distributed with this software for more info. + * NO WARRANTY + * + * For a list of known bugs (errata) and documentation, + * see via-audio.pdf in Documentation/DocBook. + * If this documentation does not exist, run "make pdfdocs". + */ + + +#define VIA_VERSION "1.9.1-ac4-2.5" + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "sound_config.h" +#include "dev_table.h" +#include "mpu401.h" + + +#undef VIA_DEBUG /* define to enable debugging output and checks */ +#ifdef VIA_DEBUG +/* note: prints function name for you */ +#define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __FUNCTION__ , ## args) +#else +#define DPRINTK(fmt, args...) +#endif + +#undef VIA_NDEBUG /* define to disable lightweight runtime checks */ +#ifdef VIA_NDEBUG +#define assert(expr) +#else +#define assert(expr) \ + if(!(expr)) { \ + printk( "Assertion failed! %s,%s,%s,line=%d\n", \ + #expr,__FILE__,__FUNCTION__,__LINE__); \ + } +#endif + +#define VIA_SUPPORT_MMAP 1 /* buggy, for now... */ + +#define MAX_CARDS 1 + +#define VIA_CARD_NAME "VIA 82Cxxx Audio driver " VIA_VERSION +#define VIA_MODULE_NAME "via82cxxx" +#define PFX VIA_MODULE_NAME ": " + +#define VIA_COUNTER_LIMIT 100000 + +/* size of DMA buffers */ +#define VIA_MAX_BUFFER_DMA_PAGES 32 + +/* buffering default values in ms */ +#define VIA_DEFAULT_FRAG_TIME 20 +#define VIA_DEFAULT_BUFFER_TIME 500 + +/* the hardware has a 256 fragment limit */ +#define VIA_MIN_FRAG_NUMBER 2 +#define VIA_MAX_FRAG_NUMBER 128 + +#define VIA_MAX_FRAG_SIZE PAGE_SIZE +#define VIA_MIN_FRAG_SIZE (VIA_MAX_BUFFER_DMA_PAGES * PAGE_SIZE / VIA_MAX_FRAG_NUMBER) + + +/* 82C686 function 5 (audio codec) PCI configuration registers */ +#define VIA_ACLINK_STATUS 0x40 +#define VIA_ACLINK_CTRL 0x41 +#define VIA_FUNC_ENABLE 0x42 +#define VIA_PNP_CONTROL 0x43 +#define VIA_FM_NMI_CTRL 0x48 + +/* + * controller base 0 (scatter-gather) registers + * + * NOTE: Via datasheet lists first channel as "read" + * channel and second channel as "write" channel. + * I changed the naming of the constants to be more + * clear than I felt the datasheet to be. + */ + +#define VIA_BASE0_PCM_OUT_CHAN 0x00 /* output PCM to user */ +#define VIA_BASE0_PCM_OUT_CHAN_STATUS 0x00 +#define VIA_BASE0_PCM_OUT_CHAN_CTRL 0x01 +#define VIA_BASE0_PCM_OUT_CHAN_TYPE 0x02 + +#define VIA_BASE0_PCM_IN_CHAN 0x10 /* input PCM from user */ +#define VIA_BASE0_PCM_IN_CHAN_STATUS 0x10 +#define VIA_BASE0_PCM_IN_CHAN_CTRL 0x11 +#define VIA_BASE0_PCM_IN_CHAN_TYPE 0x12 + +/* offsets from base */ +#define VIA_PCM_STATUS 0x00 +#define VIA_PCM_CONTROL 0x01 +#define VIA_PCM_TYPE 0x02 +#define VIA_PCM_LEFTVOL 0x02 +#define VIA_PCM_RIGHTVOL 0x03 +#define VIA_PCM_TABLE_ADDR 0x04 +#define VIA_PCM_STOPRATE 0x08 /* 8233+ */ +#define VIA_PCM_BLOCK_COUNT 0x0C + +/* XXX unused DMA channel for FM PCM data */ +#define VIA_BASE0_FM_OUT_CHAN 0x20 +#define VIA_BASE0_FM_OUT_CHAN_STATUS 0x20 +#define VIA_BASE0_FM_OUT_CHAN_CTRL 0x21 +#define VIA_BASE0_FM_OUT_CHAN_TYPE 0x22 + +/* Six channel audio output on 8233 */ +#define VIA_BASE0_MULTI_OUT_CHAN 0x40 +#define VIA_BASE0_MULTI_OUT_CHAN_STATUS 0x40 +#define VIA_BASE0_MULTI_OUT_CHAN_CTRL 0x41 +#define VIA_BASE0_MULTI_OUT_CHAN_TYPE 0x42 + +#define VIA_BASE0_AC97_CTRL 0x80 +#define VIA_BASE0_SGD_STATUS_SHADOW 0x84 +#define VIA_BASE0_GPI_INT_ENABLE 0x8C +#define VIA_INTR_OUT ((1<<0) | (1<<4) | (1<<8)) +#define VIA_INTR_IN ((1<<1) | (1<<5) | (1<<9)) +#define VIA_INTR_FM ((1<<2) | (1<<6) | (1<<10)) +#define VIA_INTR_MASK (VIA_INTR_OUT | VIA_INTR_IN | VIA_INTR_FM) + +/* Newer VIA we need to monitor the low 3 bits of each channel. This + mask covers the channels we don't yet use as well + */ + +#define VIA_NEW_INTR_MASK 0x77077777UL + +/* VIA_BASE0_AUDIO_xxx_CHAN_TYPE bits */ +#define VIA_IRQ_ON_FLAG (1<<0) /* int on each flagged scatter block */ +#define VIA_IRQ_ON_EOL (1<<1) /* int at end of scatter list */ +#define VIA_INT_SEL_PCI_LAST_LINE_READ (0) /* int at PCI read of last line */ +#define VIA_INT_SEL_LAST_SAMPLE_SENT (1<<2) /* int at last sample sent */ +#define VIA_INT_SEL_ONE_LINE_LEFT (1<<3) /* int at less than one line to send */ +#define VIA_PCM_FMT_STEREO (1<<4) /* PCM stereo format (bit clear == mono) */ +#define VIA_PCM_FMT_16BIT (1<<5) /* PCM 16-bit format (bit clear == 8-bit) */ +#define VIA_PCM_REC_FIFO (1<<6) /* PCM Recording FIFO */ +#define VIA_RESTART_SGD_ON_EOL (1<<7) /* restart scatter-gather at EOL */ +#define VIA_PCM_FMT_MASK (VIA_PCM_FMT_STEREO|VIA_PCM_FMT_16BIT) +#define VIA_CHAN_TYPE_MASK (VIA_RESTART_SGD_ON_EOL | \ + VIA_IRQ_ON_FLAG | \ + VIA_IRQ_ON_EOL) +#define VIA_CHAN_TYPE_INT_SELECT (VIA_INT_SEL_LAST_SAMPLE_SENT) + +/* PCI configuration register bits and masks */ +#define VIA_CR40_AC97_READY 0x01 +#define VIA_CR40_AC97_LOW_POWER 0x02 +#define VIA_CR40_SECONDARY_READY 0x04 + +#define VIA_CR41_AC97_ENABLE 0x80 /* enable AC97 codec */ +#define VIA_CR41_AC97_RESET 0x40 /* clear bit to reset AC97 */ +#define VIA_CR41_AC97_WAKEUP 0x20 /* wake up from power-down mode */ +#define VIA_CR41_AC97_SDO 0x10 /* force Serial Data Out (SDO) high */ +#define VIA_CR41_VRA 0x08 /* enable variable sample rate */ +#define VIA_CR41_PCM_ENABLE 0x04 /* AC Link SGD Read Channel PCM Data Output */ +#define VIA_CR41_FM_PCM_ENABLE 0x02 /* AC Link FM Channel PCM Data Out */ +#define VIA_CR41_SB_PCM_ENABLE 0x01 /* AC Link SB PCM Data Output */ +#define VIA_CR41_BOOT_MASK (VIA_CR41_AC97_ENABLE | \ + VIA_CR41_AC97_WAKEUP | \ + VIA_CR41_AC97_SDO) +#define VIA_CR41_RUN_MASK (VIA_CR41_AC97_ENABLE | \ + VIA_CR41_AC97_RESET | \ + VIA_CR41_VRA | \ + VIA_CR41_PCM_ENABLE) + +#define VIA_CR42_SB_ENABLE 0x01 +#define VIA_CR42_MIDI_ENABLE 0x02 +#define VIA_CR42_FM_ENABLE 0x04 +#define VIA_CR42_GAME_ENABLE 0x08 +#define VIA_CR42_MIDI_IRQMASK 0x40 +#define VIA_CR42_MIDI_PNP 0x80 + +#define VIA_CR44_SECOND_CODEC_SUPPORT (1 << 6) +#define VIA_CR44_AC_LINK_ACCESS (1 << 7) + +#define VIA_CR48_FM_TRAP_TO_NMI (1 << 2) + +/* controller base 0 register bitmasks */ +#define VIA_INT_DISABLE_MASK (~(0x01|0x02)) +#define VIA_SGD_STOPPED (1 << 2) +#define VIA_SGD_PAUSED (1 << 6) +#define VIA_SGD_ACTIVE (1 << 7) +#define VIA_SGD_TERMINATE (1 << 6) +#define VIA_SGD_FLAG (1 << 0) +#define VIA_SGD_EOL (1 << 1) +#define VIA_SGD_START (1 << 7) + +#define VIA_CR80_FIRST_CODEC 0 +#define VIA_CR80_SECOND_CODEC (1 << 30) +#define VIA_CR80_FIRST_CODEC_VALID (1 << 25) +#define VIA_CR80_VALID (1 << 25) +#define VIA_CR80_SECOND_CODEC_VALID (1 << 27) +#define VIA_CR80_BUSY (1 << 24) +#define VIA_CR83_BUSY (1) +#define VIA_CR83_FIRST_CODEC_VALID (1 << 1) +#define VIA_CR80_READ (1 << 23) +#define VIA_CR80_WRITE_MODE 0 +#define VIA_CR80_REG_IDX(idx) ((((idx) & 0xFF) >> 1) << 16) + +/* capabilities we announce */ +#ifdef VIA_SUPPORT_MMAP +#define VIA_DSP_CAP (DSP_CAP_REVISION | DSP_CAP_DUPLEX | DSP_CAP_MMAP | \ + DSP_CAP_TRIGGER | DSP_CAP_REALTIME) +#else +#define VIA_DSP_CAP (DSP_CAP_REVISION | DSP_CAP_DUPLEX | \ + DSP_CAP_TRIGGER | DSP_CAP_REALTIME) +#endif + +/* scatter-gather DMA table entry, exactly as passed to hardware */ +struct via_sgd_table { + u32 addr; + u32 count; /* includes additional VIA_xxx bits also */ +}; + +#define VIA_EOL (1 << 31) +#define VIA_FLAG (1 << 30) +#define VIA_STOP (1 << 29) + + +enum via_channel_states { + sgd_stopped = 0, + sgd_in_progress = 1, +}; + + +struct via_buffer_pgtbl { + dma_addr_t handle; + void *cpuaddr; +}; + + +struct via_channel { + atomic_t n_frags; + atomic_t hw_ptr; + wait_queue_head_t wait; + + unsigned int sw_ptr; + unsigned int slop_len; + unsigned int n_irqs; + int bytes; + + unsigned is_active : 1; + unsigned is_record : 1; + unsigned is_mapped : 1; + unsigned is_enabled : 1; + unsigned is_multi: 1; /* 8233 6 channel */ + u8 pcm_fmt; /* VIA_PCM_FMT_xxx */ + u8 channels; /* Channel count */ + + unsigned rate; /* sample rate */ + unsigned int frag_size; + unsigned int frag_number; + + unsigned char intmask; + + volatile struct via_sgd_table *sgtable; + dma_addr_t sgt_handle; + + unsigned int page_number; + struct via_buffer_pgtbl pgtbl[VIA_MAX_BUFFER_DMA_PAGES]; + + long iobase; + + const char *name; +}; + + +/* data stored for each chip */ +struct via_info { + struct pci_dev *pdev; + long baseaddr; + + struct ac97_codec *ac97; + spinlock_t ac97_lock; + spinlock_t lock; + int card_num; /* unique card number, from 0 */ + + int dev_dsp; /* /dev/dsp index from register_sound_dsp() */ + + unsigned rev_h : 1; + unsigned legacy: 1; /* Has legacy ports */ + unsigned intmask: 1; /* Needs int bits */ + unsigned sixchannel: 1; /* 8233/35 with 6 channel support */ + unsigned volume: 1; + + int locked_rate : 1; + + int mixer_vol; /* 8233/35 volume - not yet implemented */ + + struct semaphore syscall_sem; + struct semaphore open_sem; + + /* The 8233/8235 have 4 DX audio channels, two record and + one six channel out. We bind ch_in to DX 1, ch_out to multichannel + and ch_fm to DX 2. DX 3 and REC0/REC1 are unused at the + moment */ + + struct via_channel ch_in; + struct via_channel ch_out; + struct via_channel ch_fm; + +#ifdef CONFIG_MIDI_VIA82CXXX + void *midi_devc; + struct address_info midi_info; +#endif +}; + + +/* number of cards, used for assigning unique numbers to cards */ +static unsigned via_num_cards; + + + +/**************************************************************** + * + * prototypes + * + * + */ + +static int via_init_one (struct pci_dev *dev, const struct pci_device_id *id); +static void __devexit via_remove_one (struct pci_dev *pdev); + +static ssize_t via_dsp_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos); +static ssize_t via_dsp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos); +static unsigned int via_dsp_poll(struct file *file, struct poll_table_struct *wait); +static int via_dsp_ioctl (struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg); +static int via_dsp_open (struct inode *inode, struct file *file); +static int via_dsp_release(struct inode *inode, struct file *file); +static int via_dsp_mmap(struct file *file, struct vm_area_struct *vma); + +static u16 via_ac97_read_reg (struct ac97_codec *codec, u8 reg); +static void via_ac97_write_reg (struct ac97_codec *codec, u8 reg, u16 value); +static u8 via_ac97_wait_idle (struct via_info *card); + +static void via_chan_free (struct via_info *card, struct via_channel *chan); +static void via_chan_clear (struct via_info *card, struct via_channel *chan); +static void via_chan_pcm_fmt (struct via_channel *chan, int reset); +static void via_chan_buffer_free (struct via_info *card, struct via_channel *chan); + + +/**************************************************************** + * + * Various data the driver needs + * + * + */ + + +static struct pci_device_id via_pci_tbl[] = { + { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_5, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { 0, } +}; +MODULE_DEVICE_TABLE(pci,via_pci_tbl); + + +static struct pci_driver via_driver = { + .name = VIA_MODULE_NAME, + .id_table = via_pci_tbl, + .probe = via_init_one, + .remove = __devexit_p(via_remove_one), +}; + + +/**************************************************************** + * + * Low-level base 0 register read/write helpers + * + * + */ + +/** + * via_chan_stop - Terminate DMA on specified PCM channel + * @iobase: PCI base address for SGD channel registers + * + * Terminate scatter-gather DMA operation for given + * channel (derived from @iobase), if DMA is active. + * + * Note that @iobase is not the PCI base address, + * but the PCI base address plus an offset to + * one of three PCM channels supported by the chip. + * + */ + +static inline void via_chan_stop (long iobase) +{ + if (inb (iobase + VIA_PCM_STATUS) & VIA_SGD_ACTIVE) + outb (VIA_SGD_TERMINATE, iobase + VIA_PCM_CONTROL); +} + + +/** + * via_chan_status_clear - Clear status flags on specified DMA channel + * @iobase: PCI base address for SGD channel registers + * + * Clear any pending status flags for the given + * DMA channel (derived from @iobase), if any + * flags are asserted. + * + * Note that @iobase is not the PCI base address, + * but the PCI base address plus an offset to + * one of three PCM channels supported by the chip. + * + */ + +static inline void via_chan_status_clear (long iobase) +{ + u8 tmp = inb (iobase + VIA_PCM_STATUS); + + if (tmp != 0) + outb (tmp, iobase + VIA_PCM_STATUS); +} + + +/** + * sg_begin - Begin recording or playback on a PCM channel + * @chan: Channel for which DMA operation shall begin + * + * Start scatter-gather DMA for the given channel. + * + */ + +static inline void sg_begin (struct via_channel *chan) +{ + DPRINTK("Start with intmask %d\n", chan->intmask); + DPRINTK("About to start from %d to %d\n", + inl(chan->iobase + VIA_PCM_BLOCK_COUNT), + inb(chan->iobase + VIA_PCM_STOPRATE + 3)); + outb (VIA_SGD_START|chan->intmask, chan->iobase + VIA_PCM_CONTROL); + DPRINTK("Status is now %02X\n", inb(chan->iobase + VIA_PCM_STATUS)); + DPRINTK("Control is now %02X\n", inb(chan->iobase + VIA_PCM_CONTROL)); +} + + +static int sg_active (long iobase) +{ + u8 tmp = inb (iobase + VIA_PCM_STATUS); + if ((tmp & VIA_SGD_STOPPED) || (tmp & VIA_SGD_PAUSED)) { + printk(KERN_WARNING "via82cxxx warning: SG stopped or paused\n"); + return 0; + } + if (tmp & VIA_SGD_ACTIVE) + return 1; + return 0; +} + +static int via_sg_offset(struct via_channel *chan) +{ + return inl (chan->iobase + VIA_PCM_BLOCK_COUNT) & 0x00FFFFFF; +} + +/**************************************************************** + * + * Miscellaneous debris + * + * + */ + + +/** + * via_syscall_down - down the card-specific syscell semaphore + * @card: Private info for specified board + * @nonblock: boolean, non-zero if O_NONBLOCK is set + * + * Encapsulates standard method of acquiring the syscall sem. + * + * Returns negative errno on error, or zero for success. + */ + +static inline int via_syscall_down (struct via_info *card, int nonblock) +{ + /* Thomas Sailer: + * EAGAIN is supposed to be used if IO is pending, + * not if there is contention on some internal + * synchronization primitive which should be + * held only for a short time anyway + */ + nonblock = 0; + + if (nonblock) { + if (down_trylock (&card->syscall_sem)) + return -EAGAIN; + } else { + if (down_interruptible (&card->syscall_sem)) + return -ERESTARTSYS; + } + + return 0; +} + + +/** + * via_stop_everything - Stop all audio operations + * @card: Private info for specified board + * + * Stops all DMA operations and interrupts, and clear + * any pending status bits resulting from those operations. + */ + +static void via_stop_everything (struct via_info *card) +{ + u8 tmp, new_tmp; + + DPRINTK ("ENTER\n"); + + assert (card != NULL); + + /* + * terminate any existing operations on audio read/write channels + */ + via_chan_stop (card->baseaddr + VIA_BASE0_PCM_OUT_CHAN); + via_chan_stop (card->baseaddr + VIA_BASE0_PCM_IN_CHAN); + via_chan_stop (card->baseaddr + VIA_BASE0_FM_OUT_CHAN); + if(card->sixchannel) + via_chan_stop (card->baseaddr + VIA_BASE0_MULTI_OUT_CHAN); + + /* + * clear any existing stops / flags (sanity check mainly) + */ + via_chan_status_clear (card->baseaddr + VIA_BASE0_PCM_OUT_CHAN); + via_chan_status_clear (card->baseaddr + VIA_BASE0_PCM_IN_CHAN); + via_chan_status_clear (card->baseaddr + VIA_BASE0_FM_OUT_CHAN); + if(card->sixchannel) + via_chan_status_clear (card->baseaddr + VIA_BASE0_MULTI_OUT_CHAN); + + /* + * clear any enabled interrupt bits + */ + tmp = inb (card->baseaddr + VIA_BASE0_PCM_OUT_CHAN_TYPE); + new_tmp = tmp & ~(VIA_IRQ_ON_FLAG|VIA_IRQ_ON_EOL|VIA_RESTART_SGD_ON_EOL); + if (tmp != new_tmp) + outb (0, card->baseaddr + VIA_BASE0_PCM_OUT_CHAN_TYPE); + + tmp = inb (card->baseaddr + VIA_BASE0_PCM_IN_CHAN_TYPE); + new_tmp = tmp & ~(VIA_IRQ_ON_FLAG|VIA_IRQ_ON_EOL|VIA_RESTART_SGD_ON_EOL); + if (tmp != new_tmp) + outb (0, card->baseaddr + VIA_BASE0_PCM_IN_CHAN_TYPE); + + tmp = inb (card->baseaddr + VIA_BASE0_FM_OUT_CHAN_TYPE); + new_tmp = tmp & ~(VIA_IRQ_ON_FLAG|VIA_IRQ_ON_EOL|VIA_RESTART_SGD_ON_EOL); + if (tmp != new_tmp) + outb (0, card->baseaddr + VIA_BASE0_FM_OUT_CHAN_TYPE); + + if(card->sixchannel) + { + tmp = inb (card->baseaddr + VIA_BASE0_MULTI_OUT_CHAN_TYPE); + new_tmp = tmp & ~(VIA_IRQ_ON_FLAG|VIA_IRQ_ON_EOL|VIA_RESTART_SGD_ON_EOL); + if (tmp != new_tmp) + outb (0, card->baseaddr + VIA_BASE0_MULTI_OUT_CHAN_TYPE); + } + + udelay(10); + + /* + * clear any existing flags + */ + via_chan_status_clear (card->baseaddr + VIA_BASE0_PCM_OUT_CHAN); + via_chan_status_clear (card->baseaddr + VIA_BASE0_PCM_IN_CHAN); + via_chan_status_clear (card->baseaddr + VIA_BASE0_FM_OUT_CHAN); + + DPRINTK ("EXIT\n"); +} + + +/** + * via_set_rate - Set PCM rate for given channel + * @ac97: Pointer to generic codec info struct + * @chan: Private info for specified channel + * @rate: Desired PCM sample rate, in Khz + * + * Sets the PCM sample rate for a channel. + * + * Values for @rate are clamped to a range of 4000 Khz through 48000 Khz, + * due to hardware constraints. + */ + +static int via_set_rate (struct ac97_codec *ac97, + struct via_channel *chan, unsigned rate) +{ + struct via_info *card = ac97->private_data; + int rate_reg; + u32 dacp; + u32 mast_vol, phone_vol, mono_vol, pcm_vol; + u32 mute_vol = 0x8000; /* The mute volume? -- Seems to work! */ + + DPRINTK ("ENTER, rate = %d\n", rate); + + if (chan->rate == rate) + goto out; + if (card->locked_rate) { + chan->rate = 48000; + goto out; + } + + if (rate > 48000) rate = 48000; + if (rate < 4000) rate = 4000; + + rate_reg = chan->is_record ? AC97_PCM_LR_ADC_RATE : + AC97_PCM_FRONT_DAC_RATE; + + /* Save current state */ + dacp=via_ac97_read_reg(ac97, AC97_POWER_CONTROL); + mast_vol = via_ac97_read_reg(ac97, AC97_MASTER_VOL_STEREO); + mono_vol = via_ac97_read_reg(ac97, AC97_MASTER_VOL_MONO); + phone_vol = via_ac97_read_reg(ac97, AC97_HEADPHONE_VOL); + pcm_vol = via_ac97_read_reg(ac97, AC97_PCMOUT_VOL); + /* Mute - largely reduces popping */ + via_ac97_write_reg(ac97, AC97_MASTER_VOL_STEREO, mute_vol); + via_ac97_write_reg(ac97, AC97_MASTER_VOL_MONO, mute_vol); + via_ac97_write_reg(ac97, AC97_HEADPHONE_VOL, mute_vol); + via_ac97_write_reg(ac97, AC97_PCMOUT_VOL, mute_vol); + /* Power down the DAC */ + via_ac97_write_reg(ac97, AC97_POWER_CONTROL, dacp|0x0200); + + /* Set new rate */ + via_ac97_write_reg (ac97, rate_reg, rate); + + /* Power DAC back up */ + via_ac97_write_reg(ac97, AC97_POWER_CONTROL, dacp); + udelay (200); /* reduces popping */ + + /* Restore volumes */ + via_ac97_write_reg(ac97, AC97_MASTER_VOL_STEREO, mast_vol); + via_ac97_write_reg(ac97, AC97_MASTER_VOL_MONO, mono_vol); + via_ac97_write_reg(ac97, AC97_HEADPHONE_VOL, phone_vol); + via_ac97_write_reg(ac97, AC97_PCMOUT_VOL, pcm_vol); + + /* the hardware might return a value different than what we + * passed to it, so read the rate value back from hardware + * to see what we came up with + */ + chan->rate = via_ac97_read_reg (ac97, rate_reg); + + if (chan->rate == 0) { + card->locked_rate = 1; + chan->rate = 48000; + printk (KERN_WARNING PFX "Codec rate locked at 48Khz\n"); + } + +out: + DPRINTK ("EXIT, returning rate %d Hz\n", chan->rate); + return chan->rate; +} + + +/**************************************************************** + * + * Channel-specific operations + * + * + */ + + +/** + * via_chan_init_defaults - Initialize a struct via_channel + * @card: Private audio chip info + * @chan: Channel to be initialized + * + * Zero @chan, and then set all static defaults for the structure. + */ + +static void via_chan_init_defaults (struct via_info *card, struct via_channel *chan) +{ + memset (chan, 0, sizeof (*chan)); + + if(card->intmask) + chan->intmask = 0x23; /* Turn on the IRQ bits */ + + if (chan == &card->ch_out) { + chan->name = "PCM-OUT"; + if(card->sixchannel) + { + chan->iobase = card->baseaddr + VIA_BASE0_MULTI_OUT_CHAN; + chan->is_multi = 1; + DPRINTK("Using multichannel for pcm out\n"); + } + else + chan->iobase = card->baseaddr + VIA_BASE0_PCM_OUT_CHAN; + } else if (chan == &card->ch_in) { + chan->name = "PCM-IN"; + chan->iobase = card->baseaddr + VIA_BASE0_PCM_IN_CHAN; + chan->is_record = 1; + } else if (chan == &card->ch_fm) { + chan->name = "PCM-OUT-FM"; + chan->iobase = card->baseaddr + VIA_BASE0_FM_OUT_CHAN; + } else { + BUG(); + } + + init_waitqueue_head (&chan->wait); + + chan->pcm_fmt = VIA_PCM_FMT_MASK; + chan->is_enabled = 1; + + chan->frag_number = 0; + chan->frag_size = 0; + atomic_set(&chan->n_frags, 0); + atomic_set (&chan->hw_ptr, 0); +} + +/** + * via_chan_init - Initialize PCM channel + * @card: Private audio chip info + * @chan: Channel to be initialized + * + * Performs some of the preparations necessary to begin + * using a PCM channel. + * + * Currently the preparations consist of + * setting the PCM channel to a known state. + */ + + +static void via_chan_init (struct via_info *card, struct via_channel *chan) +{ + + DPRINTK ("ENTER\n"); + + /* bzero channel structure, and init members to defaults */ + via_chan_init_defaults (card, chan); + + /* stop any existing channel output */ + via_chan_clear (card, chan); + via_chan_status_clear (chan->iobase); + via_chan_pcm_fmt (chan, 1); + + DPRINTK ("EXIT\n"); +} + +/** + * via_chan_buffer_init - Initialize PCM channel buffer + * @card: Private audio chip info + * @chan: Channel to be initialized + * + * Performs some of the preparations necessary to begin + * using a PCM channel. + * + * Currently the preparations include allocating the + * scatter-gather DMA table and buffers, + * and passing the + * address of the DMA table to the hardware. + * + * Note that special care is taken when passing the + * DMA table address to hardware, because it was found + * during driver development that the hardware did not + * always "take" the address. + */ + +static int via_chan_buffer_init (struct via_info *card, struct via_channel *chan) +{ + int page, offset; + int i; + + DPRINTK ("ENTER\n"); + + + chan->intmask = 0; + if(card->intmask) + chan->intmask = 0x23; /* Turn on the IRQ bits */ + + if (chan->sgtable != NULL) { + DPRINTK ("EXIT\n"); + return 0; + } + + /* alloc DMA-able memory for scatter-gather table */ + chan->sgtable = pci_alloc_consistent (card->pdev, + (sizeof (struct via_sgd_table) * chan->frag_number), + &chan->sgt_handle); + if (!chan->sgtable) { + printk (KERN_ERR PFX "DMA table alloc fail, aborting\n"); + DPRINTK ("EXIT\n"); + return -ENOMEM; + } + + memset ((void*)chan->sgtable, 0, + (sizeof (struct via_sgd_table) * chan->frag_number)); + + /* alloc DMA-able memory for scatter-gather buffers */ + + chan->page_number = (chan->frag_number * chan->frag_size) / PAGE_SIZE + + (((chan->frag_number * chan->frag_size) % PAGE_SIZE) ? 1 : 0); + + for (i = 0; i < chan->page_number; i++) { + chan->pgtbl[i].cpuaddr = pci_alloc_consistent (card->pdev, PAGE_SIZE, + &chan->pgtbl[i].handle); + + if (!chan->pgtbl[i].cpuaddr) { + chan->page_number = i; + goto err_out_nomem; + } + +#ifndef VIA_NDEBUG + memset (chan->pgtbl[i].cpuaddr, 0xBC, chan->frag_size); +#endif + +#if 1 + DPRINTK ("dmabuf_pg #%d (h=%lx, v2p=%lx, a=%p)\n", + i, (long)chan->pgtbl[i].handle, + virt_to_phys(chan->pgtbl[i].cpuaddr), + chan->pgtbl[i].cpuaddr); +#endif + } + + for (i = 0; i < chan->frag_number; i++) { + + page = i / (PAGE_SIZE / chan->frag_size); + offset = (i % (PAGE_SIZE / chan->frag_size)) * chan->frag_size; + + chan->sgtable[i].count = cpu_to_le32 (chan->frag_size | VIA_FLAG); + chan->sgtable[i].addr = cpu_to_le32 (chan->pgtbl[page].handle + offset); + +#if 1 + DPRINTK ("dmabuf #%d (32(h)=%lx)\n", + i, + (long)chan->sgtable[i].addr); +#endif + } + + /* overwrite the last buffer information */ + chan->sgtable[chan->frag_number - 1].count = cpu_to_le32 (chan->frag_size | VIA_EOL); + + /* set location of DMA-able scatter-gather info table */ + DPRINTK ("outl (0x%X, 0x%04lX)\n", + chan->sgt_handle, chan->iobase + VIA_PCM_TABLE_ADDR); + + via_ac97_wait_idle (card); + outl (chan->sgt_handle, chan->iobase + VIA_PCM_TABLE_ADDR); + udelay (20); + via_ac97_wait_idle (card); + /* load no rate adaption, stereo 16bit, set up ring slots */ + if(card->sixchannel) + { + if(!chan->is_multi) + { + outl (0xFFFFF | (0x3 << 20) | (chan->frag_number << 24), chan->iobase + VIA_PCM_STOPRATE); + udelay (20); + via_ac97_wait_idle (card); + } + } + + DPRINTK ("inl (0x%lX) = %x\n", + chan->iobase + VIA_PCM_TABLE_ADDR, + inl(chan->iobase + VIA_PCM_TABLE_ADDR)); + + DPRINTK ("EXIT\n"); + return 0; + +err_out_nomem: + printk (KERN_ERR PFX "DMA buffer alloc fail, aborting\n"); + via_chan_buffer_free (card, chan); + DPRINTK ("EXIT\n"); + return -ENOMEM; +} + + +/** + * via_chan_free - Release a PCM channel + * @card: Private audio chip info + * @chan: Channel to be released + * + * Performs all the functions necessary to clean up + * an initialized channel. + * + * Currently these functions include disabled any + * active DMA operations, setting the PCM channel + * back to a known state, and releasing any allocated + * sound buffers. + */ + +static void via_chan_free (struct via_info *card, struct via_channel *chan) +{ + DPRINTK ("ENTER\n"); + + spin_lock_irq (&card->lock); + + /* stop any existing channel output */ + via_chan_status_clear (chan->iobase); + via_chan_stop (chan->iobase); + via_chan_status_clear (chan->iobase); + + spin_unlock_irq (&card->lock); + + synchronize_irq(card->pdev->irq); + + DPRINTK ("EXIT\n"); +} + +static void via_chan_buffer_free (struct via_info *card, struct via_channel *chan) +{ + int i; + + DPRINTK ("ENTER\n"); + + /* zero location of DMA-able scatter-gather info table */ + via_ac97_wait_idle(card); + outl (0, chan->iobase + VIA_PCM_TABLE_ADDR); + + for (i = 0; i < chan->page_number; i++) + if (chan->pgtbl[i].cpuaddr) { + pci_free_consistent (card->pdev, PAGE_SIZE, + chan->pgtbl[i].cpuaddr, + chan->pgtbl[i].handle); + chan->pgtbl[i].cpuaddr = NULL; + chan->pgtbl[i].handle = 0; + } + + chan->page_number = 0; + + if (chan->sgtable) { + pci_free_consistent (card->pdev, + (sizeof (struct via_sgd_table) * chan->frag_number), + (void*)chan->sgtable, chan->sgt_handle); + chan->sgtable = NULL; + } + + DPRINTK ("EXIT\n"); +} + + +/** + * via_chan_pcm_fmt - Update PCM channel settings + * @chan: Channel to be updated + * @reset: Boolean. If non-zero, channel will be reset + * to 8-bit mono mode. + * + * Stores the settings of the current PCM format, + * 8-bit or 16-bit, and mono/stereo, into the + * hardware settings for the specified channel. + * If @reset is non-zero, the channel is reset + * to 8-bit mono mode. Otherwise, the channel + * is set to the values stored in the channel + * information struct @chan. + */ + +static void via_chan_pcm_fmt (struct via_channel *chan, int reset) +{ + DPRINTK ("ENTER, pcm_fmt=0x%02X, reset=%s\n", + chan->pcm_fmt, reset ? "yes" : "no"); + + assert (chan != NULL); + + if (reset) + { + /* reset to 8-bit mono mode */ + chan->pcm_fmt = 0; + chan->channels = 1; + } + + /* enable interrupts on FLAG and EOL */ + chan->pcm_fmt |= VIA_CHAN_TYPE_MASK; + + /* if we are recording, enable recording fifo bit */ + if (chan->is_record) + chan->pcm_fmt |= VIA_PCM_REC_FIFO; + /* set interrupt select bits where applicable (PCM in & out channels) */ + if (!chan->is_record) + chan->pcm_fmt |= VIA_CHAN_TYPE_INT_SELECT; + + DPRINTK("SET FMT - %02x %02x\n", chan->intmask , chan->is_multi); + + if(chan->intmask) + { + u32 m; + + /* + * Channel 0x4 is up to 6 x 16bit and has to be + * programmed differently + */ + + if(chan->is_multi) + { + u8 c = 0; + + /* + * Load the type bit for num channels + * and 8/16bit + */ + + if(chan->pcm_fmt & VIA_PCM_FMT_16BIT) + c = 1 << 7; + if(chan->pcm_fmt & VIA_PCM_FMT_STEREO) + c |= (2<<4); + else + c |= (1<<4); + + outb(c, chan->iobase + VIA_PCM_TYPE); + + /* + * Set the channel steering + * Mono + * Channel 0 to slot 3 + * Channel 0 to slot 4 + * Stereo + * Channel 0 to slot 3 + * Channel 1 to slot 4 + */ + + switch(chan->channels) + { + case 1: + outl(0xFF000000 | (1<<0) | (1<<4) , chan->iobase + VIA_PCM_STOPRATE); + break; + case 2: + outl(0xFF000000 | (1<<0) | (2<<4) , chan->iobase + VIA_PCM_STOPRATE); + break; + case 4: + outl(0xFF000000 | (1<<0) | (2<<4) | (3<<8) | (4<<12), chan->iobase + VIA_PCM_STOPRATE); + break; + case 6: + outl(0xFF000000 | (1<<0) | (2<<4) | (5<<8) | (6<<12) | (3<<16) | (4<<20), chan->iobase + VIA_PCM_STOPRATE); + break; + } + } + else + { + /* + * New style, turn off channel volume + * control, set bits in the right register + */ + outb(0x0, chan->iobase + VIA_PCM_LEFTVOL); + outb(0x0, chan->iobase + VIA_PCM_RIGHTVOL); + + m = inl(chan->iobase + VIA_PCM_STOPRATE); + m &= ~(3<<20); + if(chan->pcm_fmt & VIA_PCM_FMT_STEREO) + m |= (1 << 20); + if(chan->pcm_fmt & VIA_PCM_FMT_16BIT) + m |= (1 << 21); + outl(m, chan->iobase + VIA_PCM_STOPRATE); + } + } + else + outb (chan->pcm_fmt, chan->iobase + VIA_PCM_TYPE); + + + DPRINTK ("EXIT, pcm_fmt = 0x%02X, reg = 0x%02X\n", + chan->pcm_fmt, + inb (chan->iobase + VIA_PCM_TYPE)); +} + + +/** + * via_chan_clear - Stop DMA channel operation, and reset pointers + * @card: the chip to accessed + * @chan: Channel to be cleared + * + * Call via_chan_stop to halt DMA operations, and then resets + * all software pointers which track DMA operation. + */ + +static void via_chan_clear (struct via_info *card, struct via_channel *chan) +{ + DPRINTK ("ENTER\n"); + via_chan_stop (chan->iobase); + via_chan_buffer_free(card, chan); + chan->is_active = 0; + chan->is_mapped = 0; + chan->is_enabled = 1; + chan->slop_len = 0; + chan->sw_ptr = 0; + chan->n_irqs = 0; + atomic_set (&chan->hw_ptr, 0); + DPRINTK ("EXIT\n"); +} + + +/** + * via_chan_set_speed - Set PCM sample rate for given channel + * @card: Private info for specified board + * @chan: Channel whose sample rate will be adjusted + * @val: New sample rate, in Khz + * + * Helper function for the %SNDCTL_DSP_SPEED ioctl. OSS semantics + * demand that all audio operations halt (if they are not already + * halted) when the %SNDCTL_DSP_SPEED is given. + * + * This function halts all audio operations for the given channel + * @chan, and then calls via_set_rate to set the audio hardware + * to the new rate. + */ + +static int via_chan_set_speed (struct via_info *card, + struct via_channel *chan, int val) +{ + DPRINTK ("ENTER, requested rate = %d\n", val); + + via_chan_clear (card, chan); + + val = via_set_rate (card->ac97, chan, val); + + DPRINTK ("EXIT, returning %d\n", val); + return val; +} + + +/** + * via_chan_set_fmt - Set PCM sample size for given channel + * @card: Private info for specified board + * @chan: Channel whose sample size will be adjusted + * @val: New sample size, use the %AFMT_xxx constants + * + * Helper function for the %SNDCTL_DSP_SETFMT ioctl. OSS semantics + * demand that all audio operations halt (if they are not already + * halted) when the %SNDCTL_DSP_SETFMT is given. + * + * This function halts all audio operations for the given channel + * @chan, and then calls via_chan_pcm_fmt to set the audio hardware + * to the new sample size, either 8-bit or 16-bit. + */ + +static int via_chan_set_fmt (struct via_info *card, + struct via_channel *chan, int val) +{ + DPRINTK ("ENTER, val=%s\n", + val == AFMT_U8 ? "AFMT_U8" : + val == AFMT_S16_LE ? "AFMT_S16_LE" : + "unknown"); + + via_chan_clear (card, chan); + + assert (val != AFMT_QUERY); /* this case is handled elsewhere */ + + switch (val) { + case AFMT_S16_LE: + if ((chan->pcm_fmt & VIA_PCM_FMT_16BIT) == 0) { + chan->pcm_fmt |= VIA_PCM_FMT_16BIT; + via_chan_pcm_fmt (chan, 0); + } + break; + + case AFMT_U8: + if (chan->pcm_fmt & VIA_PCM_FMT_16BIT) { + chan->pcm_fmt &= ~VIA_PCM_FMT_16BIT; + via_chan_pcm_fmt (chan, 0); + } + break; + + default: + DPRINTK ("unknown AFMT: 0x%X\n", val); + val = AFMT_S16_LE; + } + + DPRINTK ("EXIT\n"); + return val; +} + + +/** + * via_chan_set_stereo - Enable or disable stereo for a DMA channel + * @card: Private info for specified board + * @chan: Channel whose stereo setting will be adjusted + * @val: New sample size, use the %AFMT_xxx constants + * + * Helper function for the %SNDCTL_DSP_CHANNELS and %SNDCTL_DSP_STEREO ioctls. OSS semantics + * demand that all audio operations halt (if they are not already + * halted) when %SNDCTL_DSP_CHANNELS or SNDCTL_DSP_STEREO is given. + * + * This function halts all audio operations for the given channel + * @chan, and then calls via_chan_pcm_fmt to set the audio hardware + * to enable or disable stereo. + */ + +static int via_chan_set_stereo (struct via_info *card, + struct via_channel *chan, int val) +{ + DPRINTK ("ENTER, channels = %d\n", val); + + via_chan_clear (card, chan); + + switch (val) { + + /* mono */ + case 1: + chan->pcm_fmt &= ~VIA_PCM_FMT_STEREO; + chan->channels = 1; + via_chan_pcm_fmt (chan, 0); + break; + + /* stereo */ + case 2: + chan->pcm_fmt |= VIA_PCM_FMT_STEREO; + chan->channels = 2; + via_chan_pcm_fmt (chan, 0); + break; + + case 4: + case 6: + if(chan->is_multi) + { + chan->pcm_fmt |= VIA_PCM_FMT_STEREO; + chan->channels = val; + break; + } + /* unknown */ + default: + val = -EINVAL; + break; + } + + DPRINTK ("EXIT, returning %d\n", val); + return val; +} + +static int via_chan_set_buffering (struct via_info *card, + struct via_channel *chan, int val) +{ + int shift; + + DPRINTK ("ENTER\n"); + + /* in both cases the buffer cannot be changed */ + if (chan->is_active || chan->is_mapped) { + DPRINTK ("EXIT\n"); + return -EINVAL; + } + + /* called outside SETFRAGMENT */ + /* set defaults or do nothing */ + if (val < 0) { + + if (chan->frag_size && chan->frag_number) + goto out; + + DPRINTK ("\n"); + + chan->frag_size = (VIA_DEFAULT_FRAG_TIME * chan->rate * chan->channels + * ((chan->pcm_fmt & VIA_PCM_FMT_16BIT) ? 2 : 1)) / 1000 - 1; + + shift = 0; + while (chan->frag_size) { + chan->frag_size >>= 1; + shift++; + } + chan->frag_size = 1 << shift; + + chan->frag_number = (VIA_DEFAULT_BUFFER_TIME / VIA_DEFAULT_FRAG_TIME); + + DPRINTK ("setting default values %d %d\n", chan->frag_size, chan->frag_number); + } else { + chan->frag_size = 1 << (val & 0xFFFF); + chan->frag_number = (val >> 16) & 0xFFFF; + + DPRINTK ("using user values %d %d\n", chan->frag_size, chan->frag_number); + } + + /* quake3 wants frag_number to be a power of two */ + shift = 0; + while (chan->frag_number) { + chan->frag_number >>= 1; + shift++; + } + chan->frag_number = 1 << shift; + + if (chan->frag_size > VIA_MAX_FRAG_SIZE) + chan->frag_size = VIA_MAX_FRAG_SIZE; + else if (chan->frag_size < VIA_MIN_FRAG_SIZE) + chan->frag_size = VIA_MIN_FRAG_SIZE; + + if (chan->frag_number < VIA_MIN_FRAG_NUMBER) + chan->frag_number = VIA_MIN_FRAG_NUMBER; + if (chan->frag_number > VIA_MAX_FRAG_NUMBER) + chan->frag_number = VIA_MAX_FRAG_NUMBER; + + if ((chan->frag_number * chan->frag_size) / PAGE_SIZE > VIA_MAX_BUFFER_DMA_PAGES) + chan->frag_number = (VIA_MAX_BUFFER_DMA_PAGES * PAGE_SIZE) / chan->frag_size; + +out: + if (chan->is_record) + atomic_set (&chan->n_frags, 0); + else + atomic_set (&chan->n_frags, chan->frag_number); + + DPRINTK ("EXIT\n"); + + return 0; +} + +#ifdef VIA_CHAN_DUMP_BUFS +/** + * via_chan_dump_bufs - Display DMA table contents + * @chan: Channel whose DMA table will be displayed + * + * Debugging function which displays the contents of the + * scatter-gather DMA table for the given channel @chan. + */ + +static void via_chan_dump_bufs (struct via_channel *chan) +{ + int i; + + for (i = 0; i < chan->frag_number; i++) { + DPRINTK ("#%02d: addr=%x, count=%u, flag=%d, eol=%d\n", + i, chan->sgtable[i].addr, + chan->sgtable[i].count & 0x00FFFFFF, + chan->sgtable[i].count & VIA_FLAG ? 1 : 0, + chan->sgtable[i].count & VIA_EOL ? 1 : 0); + } + DPRINTK ("buf_in_use = %d, nextbuf = %d\n", + atomic_read (&chan->buf_in_use), + atomic_read (&chan->sw_ptr)); +} +#endif /* VIA_CHAN_DUMP_BUFS */ + + +/** + * via_chan_flush_frag - Flush partially-full playback buffer to hardware + * @chan: Channel whose DMA table will be flushed + * + * Flushes partially-full playback buffer to hardware. + */ + +static void via_chan_flush_frag (struct via_channel *chan) +{ + DPRINTK ("ENTER\n"); + + assert (chan->slop_len > 0); + + if (chan->sw_ptr == (chan->frag_number - 1)) + chan->sw_ptr = 0; + else + chan->sw_ptr++; + + chan->slop_len = 0; + + assert (atomic_read (&chan->n_frags) > 0); + atomic_dec (&chan->n_frags); + + DPRINTK ("EXIT\n"); +} + + + +/** + * via_chan_maybe_start - Initiate audio hardware DMA operation + * @chan: Channel whose DMA is to be started + * + * Initiate DMA operation, if the DMA engine for the given + * channel @chan is not already active. + */ + +static inline void via_chan_maybe_start (struct via_channel *chan) +{ + assert (chan->is_active == sg_active(chan->iobase)); + + DPRINTK ("MAYBE START %s\n", chan->name); + if (!chan->is_active && chan->is_enabled) { + chan->is_active = 1; + sg_begin (chan); + DPRINTK ("starting channel %s\n", chan->name); + } +} + + +/**************************************************************** + * + * Interface to ac97-codec module + * + * + */ + +/** + * via_ac97_wait_idle - Wait until AC97 codec is not busy + * @card: Private info for specified board + * + * Sleep until the AC97 codec is no longer busy. + * Returns the final value read from the SGD + * register being polled. + */ + +static u8 via_ac97_wait_idle (struct via_info *card) +{ + u8 tmp8; + int counter = VIA_COUNTER_LIMIT; + + DPRINTK ("ENTER/EXIT\n"); + + assert (card != NULL); + assert (card->pdev != NULL); + + do { + udelay (15); + + tmp8 = inb (card->baseaddr + 0x83); + } while ((tmp8 & VIA_CR83_BUSY) && (counter-- > 0)); + + if (tmp8 & VIA_CR83_BUSY) + printk (KERN_WARNING PFX "timeout waiting on AC97 codec\n"); + return tmp8; +} + + +/** + * via_ac97_read_reg - Read AC97 standard register + * @codec: Pointer to generic AC97 codec info + * @reg: Index of AC97 register to be read + * + * Read the value of a single AC97 codec register, + * as defined by the Intel AC97 specification. + * + * Defines the standard AC97 read-register operation + * required by the kernel's ac97_codec interface. + * + * Returns the 16-bit value stored in the specified + * register. + */ + +static u16 via_ac97_read_reg (struct ac97_codec *codec, u8 reg) +{ + unsigned long data; + struct via_info *card; + int counter; + + DPRINTK ("ENTER\n"); + + assert (codec != NULL); + assert (codec->private_data != NULL); + + card = codec->private_data; + + spin_lock(&card->ac97_lock); + + /* Every time we write to register 80 we cause a transaction. + The only safe way to clear the valid bit is to write it at + the same time as the command */ + data = (reg << 16) | VIA_CR80_READ | VIA_CR80_VALID; + + outl (data, card->baseaddr + VIA_BASE0_AC97_CTRL); + udelay (20); + + for (counter = VIA_COUNTER_LIMIT; counter > 0; counter--) { + udelay (1); + if ((((data = inl(card->baseaddr + VIA_BASE0_AC97_CTRL)) & + (VIA_CR80_VALID|VIA_CR80_BUSY)) == VIA_CR80_VALID)) + goto out; + } + + printk (KERN_WARNING PFX "timeout while reading AC97 codec (0x%lX)\n", data); + goto err_out; + +out: + /* Once the valid bit has become set, we must wait a complete AC97 + frame before the data has settled. */ + udelay(25); + data = (unsigned long) inl (card->baseaddr + VIA_BASE0_AC97_CTRL); + + outb (0x02, card->baseaddr + 0x83); + + if (((data & 0x007F0000) >> 16) == reg) { + DPRINTK ("EXIT, success, data=0x%lx, retval=0x%lx\n", + data, data & 0x0000FFFF); + spin_unlock(&card->ac97_lock); + return data & 0x0000FFFF; + } + + printk (KERN_WARNING "via82cxxx_audio: not our index: reg=0x%x, newreg=0x%lx\n", + reg, ((data & 0x007F0000) >> 16)); + +err_out: + spin_unlock(&card->ac97_lock); + DPRINTK ("EXIT, returning 0\n"); + return 0; +} + + +/** + * via_ac97_write_reg - Write AC97 standard register + * @codec: Pointer to generic AC97 codec info + * @reg: Index of AC97 register to be written + * @value: Value to be written to AC97 register + * + * Write the value of a single AC97 codec register, + * as defined by the Intel AC97 specification. + * + * Defines the standard AC97 write-register operation + * required by the kernel's ac97_codec interface. + */ + +static void via_ac97_write_reg (struct ac97_codec *codec, u8 reg, u16 value) +{ + u32 data; + struct via_info *card; + int counter; + + DPRINTK ("ENTER\n"); + + assert (codec != NULL); + assert (codec->private_data != NULL); + + card = codec->private_data; + + spin_lock(&card->ac97_lock); + + data = (reg << 16) + value; + outl (data, card->baseaddr + VIA_BASE0_AC97_CTRL); + udelay (10); + + for (counter = VIA_COUNTER_LIMIT; counter > 0; counter--) { + if ((inb (card->baseaddr + 0x83) & VIA_CR83_BUSY) == 0) + goto out; + + udelay (15); + } + + printk (KERN_WARNING PFX "timeout after AC97 codec write (0x%X, 0x%X)\n", reg, value); + +out: + spin_unlock(&card->ac97_lock); + DPRINTK ("EXIT\n"); +} + + +static int via_mixer_open (struct inode *inode, struct file *file) +{ + int minor = iminor(inode); + struct via_info *card; + struct pci_dev *pdev = NULL; + struct pci_driver *drvr; + + DPRINTK ("ENTER\n"); + + while ((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev)) != NULL) { + drvr = pci_dev_driver (pdev); + if (drvr == &via_driver) { + assert (pci_get_drvdata (pdev) != NULL); + + card = pci_get_drvdata (pdev); + if (card->ac97->dev_mixer == minor) + goto match; + } + } + + DPRINTK ("EXIT, returning -ENODEV\n"); + return -ENODEV; + +match: + file->private_data = card->ac97; + + DPRINTK ("EXIT, returning 0\n"); + return nonseekable_open(inode, file); +} + +static int via_mixer_ioctl (struct inode *inode, struct file *file, unsigned int cmd, + unsigned long arg) +{ + struct ac97_codec *codec = file->private_data; + struct via_info *card; + int nonblock = (file->f_flags & O_NONBLOCK); + int rc; + + DPRINTK ("ENTER\n"); + + assert (codec != NULL); + card = codec->private_data; + assert (card != NULL); + + rc = via_syscall_down (card, nonblock); + if (rc) goto out; + +#if 0 + /* + * Intercept volume control on 8233 and 8235 + */ + if(card->volume) + { + switch(cmd) + { + case SOUND_MIXER_READ_VOLUME: + return card->mixer_vol; + case SOUND_MIXER_WRITE_VOLUME: + { + int v; + if(get_user(v, (int *)arg)) + { + rc = -EFAULT; + goto out; + } + card->mixer_vol = v; + } + } + } +#endif + rc = codec->mixer_ioctl(codec, cmd, arg); + + up (&card->syscall_sem); + +out: + DPRINTK ("EXIT, returning %d\n", rc); + return rc; +} + + +static struct file_operations via_mixer_fops = { + .owner = THIS_MODULE, + .open = via_mixer_open, + .llseek = no_llseek, + .ioctl = via_mixer_ioctl, +}; + + +static int __devinit via_ac97_reset (struct via_info *card) +{ + struct pci_dev *pdev = card->pdev; + u8 tmp8; + u16 tmp16; + + DPRINTK ("ENTER\n"); + + assert (pdev != NULL); + +#ifndef NDEBUG + { + u8 r40,r41,r42,r43,r44,r48; + pci_read_config_byte (card->pdev, 0x40, &r40); + pci_read_config_byte (card->pdev, 0x41, &r41); + pci_read_config_byte (card->pdev, 0x42, &r42); + pci_read_config_byte (card->pdev, 0x43, &r43); + pci_read_config_byte (card->pdev, 0x44, &r44); + pci_read_config_byte (card->pdev, 0x48, &r48); + DPRINTK ("PCI config: %02X %02X %02X %02X %02X %02X\n", + r40,r41,r42,r43,r44,r48); + + spin_lock_irq (&card->lock); + DPRINTK ("regs==%02X %02X %02X %08X %08X %08X %08X\n", + inb (card->baseaddr + 0x00), + inb (card->baseaddr + 0x01), + inb (card->baseaddr + 0x02), + inl (card->baseaddr + 0x04), + inl (card->baseaddr + 0x0C), + inl (card->baseaddr + 0x80), + inl (card->baseaddr + 0x84)); + spin_unlock_irq (&card->lock); + + } +#endif + + /* + * Reset AC97 controller: enable, disable, enable, + * pausing after each command for good luck. Only + * do this if the codec is not ready, because it causes + * loud pops and such due to such a hard codec reset. + */ + pci_read_config_byte (pdev, VIA_ACLINK_STATUS, &tmp8); + if ((tmp8 & VIA_CR40_AC97_READY) == 0) { + pci_write_config_byte (pdev, VIA_ACLINK_CTRL, + VIA_CR41_AC97_ENABLE | + VIA_CR41_AC97_RESET | + VIA_CR41_AC97_WAKEUP); + udelay (100); + + pci_write_config_byte (pdev, VIA_ACLINK_CTRL, 0); + udelay (100); + + pci_write_config_byte (pdev, VIA_ACLINK_CTRL, + VIA_CR41_AC97_ENABLE | + VIA_CR41_PCM_ENABLE | + VIA_CR41_VRA | VIA_CR41_AC97_RESET); + udelay (100); + } + + /* Make sure VRA is enabled, in case we didn't do a + * complete codec reset, above + */ + pci_read_config_byte (pdev, VIA_ACLINK_CTRL, &tmp8); + if (((tmp8 & VIA_CR41_VRA) == 0) || + ((tmp8 & VIA_CR41_AC97_ENABLE) == 0) || + ((tmp8 & VIA_CR41_PCM_ENABLE) == 0) || + ((tmp8 & VIA_CR41_AC97_RESET) == 0)) { + pci_write_config_byte (pdev, VIA_ACLINK_CTRL, + VIA_CR41_AC97_ENABLE | + VIA_CR41_PCM_ENABLE | + VIA_CR41_VRA | VIA_CR41_AC97_RESET); + udelay (100); + } + + if(card->legacy) + { +#if 0 /* this breaks on K7M */ + /* disable legacy stuff */ + pci_write_config_byte (pdev, 0x42, 0x00); + udelay(10); +#endif + + /* route FM trap to IRQ, disable FM trap */ + pci_write_config_byte (pdev, 0x48, 0x05); + udelay(10); + } + + /* disable all codec GPI interrupts */ + outl (0, pci_resource_start (pdev, 0) + 0x8C); + + /* WARNING: this line is magic. Remove this + * and things break. */ + /* enable variable rate */ + tmp16 = via_ac97_read_reg (card->ac97, AC97_EXTENDED_STATUS); + if ((tmp16 & 1) == 0) + via_ac97_write_reg (card->ac97, AC97_EXTENDED_STATUS, tmp16 | 1); + + DPRINTK ("EXIT, returning 0\n"); + return 0; +} + + +static void via_ac97_codec_wait (struct ac97_codec *codec) +{ + assert (codec->private_data != NULL); + via_ac97_wait_idle (codec->private_data); +} + + +static int __devinit via_ac97_init (struct via_info *card) +{ + int rc; + u16 tmp16; + + DPRINTK ("ENTER\n"); + + assert (card != NULL); + + card->ac97 = ac97_alloc_codec(); + if(card->ac97 == NULL) + return -ENOMEM; + + card->ac97->private_data = card; + card->ac97->codec_read = via_ac97_read_reg; + card->ac97->codec_write = via_ac97_write_reg; + card->ac97->codec_wait = via_ac97_codec_wait; + + card->ac97->dev_mixer = register_sound_mixer (&via_mixer_fops, -1); + if (card->ac97->dev_mixer < 0) { + printk (KERN_ERR PFX "unable to register AC97 mixer, aborting\n"); + DPRINTK ("EXIT, returning -EIO\n"); + ac97_release_codec(card->ac97); + return -EIO; + } + + rc = via_ac97_reset (card); + if (rc) { + printk (KERN_ERR PFX "unable to reset AC97 codec, aborting\n"); + goto err_out; + } + + mdelay(10); + + if (ac97_probe_codec (card->ac97) == 0) { + printk (KERN_ERR PFX "unable to probe AC97 codec, aborting\n"); + rc = -EIO; + goto err_out; + } + + /* enable variable rate */ + tmp16 = via_ac97_read_reg (card->ac97, AC97_EXTENDED_STATUS); + via_ac97_write_reg (card->ac97, AC97_EXTENDED_STATUS, tmp16 | 1); + + /* + * If we cannot enable VRA, we have a locked-rate codec. + * We try again to enable VRA before assuming so, however. + */ + tmp16 = via_ac97_read_reg (card->ac97, AC97_EXTENDED_STATUS); + if ((tmp16 & 1) == 0) { + via_ac97_write_reg (card->ac97, AC97_EXTENDED_STATUS, tmp16 | 1); + tmp16 = via_ac97_read_reg (card->ac97, AC97_EXTENDED_STATUS); + if ((tmp16 & 1) == 0) { + card->locked_rate = 1; + printk (KERN_WARNING PFX "Codec rate locked at 48Khz\n"); + } + } + + DPRINTK ("EXIT, returning 0\n"); + return 0; + +err_out: + unregister_sound_mixer (card->ac97->dev_mixer); + DPRINTK ("EXIT, returning %d\n", rc); + ac97_release_codec(card->ac97); + return rc; +} + + +static void via_ac97_cleanup (struct via_info *card) +{ + DPRINTK ("ENTER\n"); + + assert (card != NULL); + assert (card->ac97->dev_mixer >= 0); + + unregister_sound_mixer (card->ac97->dev_mixer); + ac97_release_codec(card->ac97); + + DPRINTK ("EXIT\n"); +} + + + +/**************************************************************** + * + * Interrupt-related code + * + */ + +/** + * via_intr_channel - handle an interrupt for a single channel + * @card: unused + * @chan: handle interrupt for this channel + * + * This is the "meat" of the interrupt handler, + * containing the actions taken each time an interrupt + * occurs. All communication and coordination with + * userspace takes place here. + * + * Locking: inside card->lock + */ + +static void via_intr_channel (struct via_info *card, struct via_channel *chan) +{ + u8 status; + int n; + + /* check pertinent bits of status register for action bits */ + status = inb (chan->iobase) & (VIA_SGD_FLAG | VIA_SGD_EOL | VIA_SGD_STOPPED); + if (!status) + return; + + /* acknowledge any flagged bits ASAP */ + outb (status, chan->iobase); + + if (!chan->sgtable) /* XXX: temporary solution */ + return; + + /* grab current h/w ptr value */ + n = atomic_read (&chan->hw_ptr); + + /* sanity check: make sure our h/w ptr doesn't have a weird value */ + assert (n >= 0); + assert (n < chan->frag_number); + + + /* reset SGD data structure in memory to reflect a full buffer, + * and advance the h/w ptr, wrapping around to zero if needed + */ + if (n == (chan->frag_number - 1)) { + chan->sgtable[n].count = cpu_to_le32(chan->frag_size | VIA_EOL); + atomic_set (&chan->hw_ptr, 0); + } else { + chan->sgtable[n].count = cpu_to_le32(chan->frag_size | VIA_FLAG); + atomic_inc (&chan->hw_ptr); + } + + /* accounting crap for SNDCTL_DSP_GETxPTR */ + chan->n_irqs++; + chan->bytes += chan->frag_size; + /* FIXME - signed overflow is undefined */ + if (chan->bytes < 0) /* handle overflow of 31-bit value */ + chan->bytes = chan->frag_size; + /* all following checks only occur when not in mmap(2) mode */ + if (!chan->is_mapped) + { + /* If we are recording, then n_frags represents the number + * of fragments waiting to be handled by userspace. + * If we are playback, then n_frags represents the number + * of fragments remaining to be filled by userspace. + * We increment here. If we reach max number of fragments, + * this indicates an underrun/overrun. For this case under OSS, + * we stop the record/playback process. + */ + if (atomic_read (&chan->n_frags) < chan->frag_number) + atomic_inc (&chan->n_frags); + assert (atomic_read (&chan->n_frags) <= chan->frag_number); + if (atomic_read (&chan->n_frags) == chan->frag_number) { + chan->is_active = 0; + via_chan_stop (chan->iobase); + } + } + /* wake up anyone listening to see when interrupts occur */ + wake_up_all (&chan->wait); + + DPRINTK ("%s intr, status=0x%02X, hwptr=0x%lX, chan->hw_ptr=%d\n", + chan->name, status, (long) inl (chan->iobase + 0x04), + atomic_read (&chan->hw_ptr)); + + DPRINTK ("%s intr, channel n_frags == %d, missed %d\n", chan->name, + atomic_read (&chan->n_frags), missed); +} + + +static irqreturn_t via_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct via_info *card = dev_id; + u32 status32; + + /* to minimize interrupt sharing costs, we use the SGD status + * shadow register to check the status of all inputs and + * outputs with a single 32-bit bus read. If no interrupt + * conditions are flagged, we exit immediately + */ + status32 = inl (card->baseaddr + VIA_BASE0_SGD_STATUS_SHADOW); + if (!(status32 & VIA_INTR_MASK)) + { +#ifdef CONFIG_MIDI_VIA82CXXX + if (card->midi_devc) + uart401intr(irq, card->midi_devc, regs); +#endif + return IRQ_HANDLED; + } + DPRINTK ("intr, status32 == 0x%08X\n", status32); + + /* synchronize interrupt handling under SMP. this spinlock + * goes away completely on UP + */ + spin_lock (&card->lock); + + if (status32 & VIA_INTR_OUT) + via_intr_channel (card, &card->ch_out); + if (status32 & VIA_INTR_IN) + via_intr_channel (card, &card->ch_in); + if (status32 & VIA_INTR_FM) + via_intr_channel (card, &card->ch_fm); + + spin_unlock (&card->lock); + + return IRQ_HANDLED; +} + +static irqreturn_t via_new_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct via_info *card = dev_id; + u32 status32; + + /* to minimize interrupt sharing costs, we use the SGD status + * shadow register to check the status of all inputs and + * outputs with a single 32-bit bus read. If no interrupt + * conditions are flagged, we exit immediately + */ + status32 = inl (card->baseaddr + VIA_BASE0_SGD_STATUS_SHADOW); + if (!(status32 & VIA_NEW_INTR_MASK)) + return IRQ_NONE; + /* + * goes away completely on UP + */ + spin_lock (&card->lock); + + via_intr_channel (card, &card->ch_out); + via_intr_channel (card, &card->ch_in); + via_intr_channel (card, &card->ch_fm); + + spin_unlock (&card->lock); + return IRQ_HANDLED; +} + + +/** + * via_interrupt_init - Initialize interrupt handling + * @card: Private info for specified board + * + * Obtain and reserve IRQ for using in handling audio events. + * Also, disable any IRQ-generating resources, to make sure + * we don't get interrupts before we want them. + */ + +static int via_interrupt_init (struct via_info *card) +{ + u8 tmp8; + + DPRINTK ("ENTER\n"); + + assert (card != NULL); + assert (card->pdev != NULL); + + /* check for sane IRQ number. can this ever happen? */ + if (card->pdev->irq < 2) { + printk (KERN_ERR PFX "insane IRQ %d, aborting\n", + card->pdev->irq); + DPRINTK ("EXIT, returning -EIO\n"); + return -EIO; + } + + /* VIA requires this is done */ + pci_write_config_byte(card->pdev, PCI_INTERRUPT_LINE, card->pdev->irq); + + if(card->legacy) + { + /* make sure FM irq is not routed to us */ + pci_read_config_byte (card->pdev, VIA_FM_NMI_CTRL, &tmp8); + if ((tmp8 & VIA_CR48_FM_TRAP_TO_NMI) == 0) { + tmp8 |= VIA_CR48_FM_TRAP_TO_NMI; + pci_write_config_byte (card->pdev, VIA_FM_NMI_CTRL, tmp8); + } + if (request_irq (card->pdev->irq, via_interrupt, SA_SHIRQ, VIA_MODULE_NAME, card)) { + printk (KERN_ERR PFX "unable to obtain IRQ %d, aborting\n", + card->pdev->irq); + DPRINTK ("EXIT, returning -EBUSY\n"); + return -EBUSY; + } + } + else + { + if (request_irq (card->pdev->irq, via_new_interrupt, SA_SHIRQ, VIA_MODULE_NAME, card)) { + printk (KERN_ERR PFX "unable to obtain IRQ %d, aborting\n", + card->pdev->irq); + DPRINTK ("EXIT, returning -EBUSY\n"); + return -EBUSY; + } + } + + DPRINTK ("EXIT, returning 0\n"); + return 0; +} + + +/**************************************************************** + * + * OSS DSP device + * + */ + +static struct file_operations via_dsp_fops = { + .owner = THIS_MODULE, + .open = via_dsp_open, + .release = via_dsp_release, + .read = via_dsp_read, + .write = via_dsp_write, + .poll = via_dsp_poll, + .llseek = no_llseek, + .ioctl = via_dsp_ioctl, + .mmap = via_dsp_mmap, +}; + + +static int __devinit via_dsp_init (struct via_info *card) +{ + u8 tmp8; + + DPRINTK ("ENTER\n"); + + assert (card != NULL); + + if(card->legacy) + { + /* turn off legacy features, if not already */ + pci_read_config_byte (card->pdev, VIA_FUNC_ENABLE, &tmp8); + if (tmp8 & (VIA_CR42_SB_ENABLE | VIA_CR42_FM_ENABLE)) { + tmp8 &= ~(VIA_CR42_SB_ENABLE | VIA_CR42_FM_ENABLE); + pci_write_config_byte (card->pdev, VIA_FUNC_ENABLE, tmp8); + } + } + + via_stop_everything (card); + + card->dev_dsp = register_sound_dsp (&via_dsp_fops, -1); + if (card->dev_dsp < 0) { + DPRINTK ("EXIT, returning -ENODEV\n"); + return -ENODEV; + } + DPRINTK ("EXIT, returning 0\n"); + return 0; +} + + +static void via_dsp_cleanup (struct via_info *card) +{ + DPRINTK ("ENTER\n"); + + assert (card != NULL); + assert (card->dev_dsp >= 0); + + via_stop_everything (card); + + unregister_sound_dsp (card->dev_dsp); + + DPRINTK ("EXIT\n"); +} + + +static struct page * via_mm_nopage (struct vm_area_struct * vma, + unsigned long address, int *type) +{ + struct via_info *card = vma->vm_private_data; + struct via_channel *chan = &card->ch_out; + struct page *dmapage; + unsigned long pgoff; + int rd, wr; + + DPRINTK ("ENTER, start %lXh, ofs %lXh, pgoff %ld, addr %lXh\n", + vma->vm_start, + address - vma->vm_start, + (address - vma->vm_start) >> PAGE_SHIFT, + address); + + if (address > vma->vm_end) { + DPRINTK ("EXIT, returning NOPAGE_SIGBUS\n"); + return NOPAGE_SIGBUS; /* Disallow mremap */ + } + if (!card) { + DPRINTK ("EXIT, returning NOPAGE_OOM\n"); + return NOPAGE_OOM; /* Nothing allocated */ + } + + pgoff = vma->vm_pgoff + ((address - vma->vm_start) >> PAGE_SHIFT); + rd = card->ch_in.is_mapped; + wr = card->ch_out.is_mapped; + +#ifndef VIA_NDEBUG + { + unsigned long max_bufs = chan->frag_number; + if (rd && wr) max_bufs *= 2; + /* via_dsp_mmap() should ensure this */ + assert (pgoff < max_bufs); + } +#endif + + /* if full-duplex (read+write) and we have two sets of bufs, + * then the playback buffers come first, sez soundcard.c */ + if (pgoff >= chan->page_number) { + pgoff -= chan->page_number; + chan = &card->ch_in; + } else if (!wr) + chan = &card->ch_in; + + assert ((((unsigned long)chan->pgtbl[pgoff].cpuaddr) % PAGE_SIZE) == 0); + + dmapage = virt_to_page (chan->pgtbl[pgoff].cpuaddr); + DPRINTK ("EXIT, returning page %p for cpuaddr %lXh\n", + dmapage, (unsigned long) chan->pgtbl[pgoff].cpuaddr); + get_page (dmapage); + if (type) + *type = VM_FAULT_MINOR; + return dmapage; +} + + +#ifndef VM_RESERVED +static int via_mm_swapout (struct page *page, struct file *filp) +{ + return 0; +} +#endif /* VM_RESERVED */ + + +static struct vm_operations_struct via_mm_ops = { + .nopage = via_mm_nopage, + +#ifndef VM_RESERVED + .swapout = via_mm_swapout, +#endif +}; + + +static int via_dsp_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct via_info *card; + int nonblock = (file->f_flags & O_NONBLOCK); + int rc = -EINVAL, rd=0, wr=0; + unsigned long max_size, size, start, offset; + + assert (file != NULL); + assert (vma != NULL); + card = file->private_data; + assert (card != NULL); + + DPRINTK ("ENTER, start %lXh, size %ld, pgoff %ld\n", + vma->vm_start, + vma->vm_end - vma->vm_start, + vma->vm_pgoff); + + max_size = 0; + if (vma->vm_flags & VM_READ) { + rd = 1; + via_chan_set_buffering(card, &card->ch_in, -1); + via_chan_buffer_init (card, &card->ch_in); + max_size += card->ch_in.page_number << PAGE_SHIFT; + } + if (vma->vm_flags & VM_WRITE) { + wr = 1; + via_chan_set_buffering(card, &card->ch_out, -1); + via_chan_buffer_init (card, &card->ch_out); + max_size += card->ch_out.page_number << PAGE_SHIFT; + } + + start = vma->vm_start; + offset = (vma->vm_pgoff << PAGE_SHIFT); + size = vma->vm_end - vma->vm_start; + + /* some basic size/offset sanity checks */ + if (size > max_size) + goto out; + if (offset > max_size - size) + goto out; + + rc = via_syscall_down (card, nonblock); + if (rc) goto out; + + vma->vm_ops = &via_mm_ops; + vma->vm_private_data = card; + +#ifdef VM_RESERVED + vma->vm_flags |= VM_RESERVED; +#endif + + if (rd) + card->ch_in.is_mapped = 1; + if (wr) + card->ch_out.is_mapped = 1; + + up (&card->syscall_sem); + rc = 0; + +out: + DPRINTK ("EXIT, returning %d\n", rc); + return rc; +} + + +static ssize_t via_dsp_do_read (struct via_info *card, + char __user *userbuf, size_t count, + int nonblock) +{ + DECLARE_WAITQUEUE(wait, current); + const char __user *orig_userbuf = userbuf; + struct via_channel *chan = &card->ch_in; + size_t size; + int n, tmp; + ssize_t ret = 0; + + /* if SGD has not yet been started, start it */ + via_chan_maybe_start (chan); + +handle_one_block: + /* just to be a nice neighbor */ + /* Thomas Sailer: + * But also to ourselves, release semaphore if we do so */ + if (need_resched()) { + up(&card->syscall_sem); + schedule (); + ret = via_syscall_down (card, nonblock); + if (ret) + goto out; + } + + /* grab current channel software pointer. In the case of + * recording, this is pointing to the next buffer that + * will receive data from the audio hardware. + */ + n = chan->sw_ptr; + + /* n_frags represents the number of fragments waiting + * to be copied to userland. sleep until at least + * one buffer has been read from the audio hardware. + */ + add_wait_queue(&chan->wait, &wait); + for (;;) { + __set_current_state(TASK_INTERRUPTIBLE); + tmp = atomic_read (&chan->n_frags); + assert (tmp >= 0); + assert (tmp <= chan->frag_number); + if (tmp) + break; + if (nonblock || !chan->is_active) { + ret = -EAGAIN; + break; + } + + up(&card->syscall_sem); + + DPRINTK ("Sleeping on block %d\n", n); + schedule(); + + ret = via_syscall_down (card, nonblock); + if (ret) + break; + + if (signal_pending (current)) { + ret = -ERESTARTSYS; + break; + } + } + set_current_state(TASK_RUNNING); + remove_wait_queue(&chan->wait, &wait); + if (ret) + goto out; + + /* Now that we have a buffer we can read from, send + * as much as sample data possible to userspace. + */ + while ((count > 0) && (chan->slop_len < chan->frag_size)) { + size_t slop_left = chan->frag_size - chan->slop_len; + void *base = chan->pgtbl[n / (PAGE_SIZE / chan->frag_size)].cpuaddr; + unsigned ofs = (n % (PAGE_SIZE / chan->frag_size)) * chan->frag_size; + + size = (count < slop_left) ? count : slop_left; + if (copy_to_user (userbuf, + base + ofs + chan->slop_len, + size)) { + ret = -EFAULT; + goto out; + } + + count -= size; + chan->slop_len += size; + userbuf += size; + } + + /* If we didn't copy the buffer completely to userspace, + * stop now. + */ + if (chan->slop_len < chan->frag_size) + goto out; + + /* + * If we get to this point, we copied one buffer completely + * to userspace, give the buffer back to the hardware. + */ + + /* advance channel software pointer to point to + * the next buffer from which we will copy + */ + if (chan->sw_ptr == (chan->frag_number - 1)) + chan->sw_ptr = 0; + else + chan->sw_ptr++; + + /* mark one less buffer waiting to be processed */ + assert (atomic_read (&chan->n_frags) > 0); + atomic_dec (&chan->n_frags); + + /* we are at a block boundary, there is no fragment data */ + chan->slop_len = 0; + + DPRINTK ("Flushed block %u, sw_ptr now %u, n_frags now %d\n", + n, chan->sw_ptr, atomic_read (&chan->n_frags)); + + DPRINTK ("regs==%02X %02X %02X %08X %08X %08X %08X\n", + inb (card->baseaddr + 0x00), + inb (card->baseaddr + 0x01), + inb (card->baseaddr + 0x02), + inl (card->baseaddr + 0x04), + inl (card->baseaddr + 0x0C), + inl (card->baseaddr + 0x80), + inl (card->baseaddr + 0x84)); + + if (count > 0) + goto handle_one_block; + +out: + return (userbuf != orig_userbuf) ? (userbuf - orig_userbuf) : ret; +} + + +static ssize_t via_dsp_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) +{ + struct via_info *card; + int nonblock = (file->f_flags & O_NONBLOCK); + int rc; + + DPRINTK ("ENTER, file=%p, buffer=%p, count=%u, ppos=%lu\n", + file, buffer, count, ppos ? ((unsigned long)*ppos) : 0); + + assert (file != NULL); + card = file->private_data; + assert (card != NULL); + + rc = via_syscall_down (card, nonblock); + if (rc) goto out; + + if (card->ch_in.is_mapped) { + rc = -ENXIO; + goto out_up; + } + + via_chan_set_buffering(card, &card->ch_in, -1); + rc = via_chan_buffer_init (card, &card->ch_in); + + if (rc) + goto out_up; + + rc = via_dsp_do_read (card, buffer, count, nonblock); + +out_up: + up (&card->syscall_sem); +out: + DPRINTK ("EXIT, returning %ld\n",(long) rc); + return rc; +} + + +static ssize_t via_dsp_do_write (struct via_info *card, + const char __user *userbuf, size_t count, + int nonblock) +{ + DECLARE_WAITQUEUE(wait, current); + const char __user *orig_userbuf = userbuf; + struct via_channel *chan = &card->ch_out; + volatile struct via_sgd_table *sgtable = chan->sgtable; + size_t size; + int n, tmp; + ssize_t ret = 0; + +handle_one_block: + /* just to be a nice neighbor */ + /* Thomas Sailer: + * But also to ourselves, release semaphore if we do so */ + if (need_resched()) { + up(&card->syscall_sem); + schedule (); + ret = via_syscall_down (card, nonblock); + if (ret) + goto out; + } + + /* grab current channel fragment pointer. In the case of + * playback, this is pointing to the next fragment that + * should receive data from userland. + */ + n = chan->sw_ptr; + + /* n_frags represents the number of fragments remaining + * to be filled by userspace. Sleep until + * at least one fragment is available for our use. + */ + add_wait_queue(&chan->wait, &wait); + for (;;) { + __set_current_state(TASK_INTERRUPTIBLE); + tmp = atomic_read (&chan->n_frags); + assert (tmp >= 0); + assert (tmp <= chan->frag_number); + if (tmp) + break; + if (nonblock || !chan->is_active) { + ret = -EAGAIN; + break; + } + + up(&card->syscall_sem); + + DPRINTK ("Sleeping on page %d, tmp==%d, ir==%d\n", n, tmp, chan->is_record); + schedule(); + + ret = via_syscall_down (card, nonblock); + if (ret) + break; + + if (signal_pending (current)) { + ret = -ERESTARTSYS; + break; + } + } + set_current_state(TASK_RUNNING); + remove_wait_queue(&chan->wait, &wait); + if (ret) + goto out; + + /* Now that we have at least one fragment we can write to, fill the buffer + * as much as possible with data from userspace. + */ + while ((count > 0) && (chan->slop_len < chan->frag_size)) { + size_t slop_left = chan->frag_size - chan->slop_len; + + size = (count < slop_left) ? count : slop_left; + if (copy_from_user (chan->pgtbl[n / (PAGE_SIZE / chan->frag_size)].cpuaddr + (n % (PAGE_SIZE / chan->frag_size)) * chan->frag_size + chan->slop_len, + userbuf, size)) { + ret = -EFAULT; + goto out; + } + + count -= size; + chan->slop_len += size; + userbuf += size; + } + + /* If we didn't fill up the buffer with data, stop now. + * Put a 'stop' marker in the DMA table too, to tell the + * audio hardware to stop if it gets here. + */ + if (chan->slop_len < chan->frag_size) { + sgtable[n].count = cpu_to_le32 (chan->slop_len | VIA_EOL | VIA_STOP); + goto out; + } + + /* + * If we get to this point, we have filled a buffer with + * audio data, flush the buffer to audio hardware. + */ + + /* Record the true size for the audio hardware to notice */ + if (n == (chan->frag_number - 1)) + sgtable[n].count = cpu_to_le32 (chan->frag_size | VIA_EOL); + else + sgtable[n].count = cpu_to_le32 (chan->frag_size | VIA_FLAG); + + /* advance channel software pointer to point to + * the next buffer we will fill with data + */ + if (chan->sw_ptr == (chan->frag_number - 1)) + chan->sw_ptr = 0; + else + chan->sw_ptr++; + + /* mark one less buffer as being available for userspace consumption */ + assert (atomic_read (&chan->n_frags) > 0); + atomic_dec (&chan->n_frags); + + /* we are at a block boundary, there is no fragment data */ + chan->slop_len = 0; + + /* if SGD has not yet been started, start it */ + via_chan_maybe_start (chan); + + DPRINTK ("Flushed block %u, sw_ptr now %u, n_frags now %d\n", + n, chan->sw_ptr, atomic_read (&chan->n_frags)); + + DPRINTK ("regs==S=%02X C=%02X TP=%02X BP=%08X RT=%08X SG=%08X CC=%08X SS=%08X\n", + inb (card->baseaddr + 0x00), + inb (card->baseaddr + 0x01), + inb (card->baseaddr + 0x02), + inl (card->baseaddr + 0x04), + inl (card->baseaddr + 0x08), + inl (card->baseaddr + 0x0C), + inl (card->baseaddr + 0x80), + inl (card->baseaddr + 0x84)); + + if (count > 0) + goto handle_one_block; + +out: + if (userbuf - orig_userbuf) + return userbuf - orig_userbuf; + else + return ret; +} + + +static ssize_t via_dsp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos) +{ + struct via_info *card; + ssize_t rc; + int nonblock = (file->f_flags & O_NONBLOCK); + + DPRINTK ("ENTER, file=%p, buffer=%p, count=%u, ppos=%lu\n", + file, buffer, count, ppos ? ((unsigned long)*ppos) : 0); + + assert (file != NULL); + card = file->private_data; + assert (card != NULL); + + rc = via_syscall_down (card, nonblock); + if (rc) goto out; + + if (card->ch_out.is_mapped) { + rc = -ENXIO; + goto out_up; + } + + via_chan_set_buffering(card, &card->ch_out, -1); + rc = via_chan_buffer_init (card, &card->ch_out); + + if (rc) + goto out_up; + + rc = via_dsp_do_write (card, buffer, count, nonblock); + +out_up: + up (&card->syscall_sem); +out: + DPRINTK ("EXIT, returning %ld\n",(long) rc); + return rc; +} + + +static unsigned int via_dsp_poll(struct file *file, struct poll_table_struct *wait) +{ + struct via_info *card; + struct via_channel *chan; + unsigned int mask = 0; + + DPRINTK ("ENTER\n"); + + assert (file != NULL); + card = file->private_data; + assert (card != NULL); + + if (file->f_mode & FMODE_READ) { + chan = &card->ch_in; + if (sg_active (chan->iobase)) + poll_wait(file, &chan->wait, wait); + if (atomic_read (&chan->n_frags) > 0) + mask |= POLLIN | POLLRDNORM; + } + + if (file->f_mode & FMODE_WRITE) { + chan = &card->ch_out; + if (sg_active (chan->iobase)) + poll_wait(file, &chan->wait, wait); + if (atomic_read (&chan->n_frags) > 0) + mask |= POLLOUT | POLLWRNORM; + } + + DPRINTK ("EXIT, returning %u\n", mask); + return mask; +} + + +/** + * via_dsp_drain_playback - sleep until all playback samples are flushed + * @card: Private info for specified board + * @chan: Channel to drain + * @nonblock: boolean, non-zero if O_NONBLOCK is set + * + * Sleeps until all playback has been flushed to the audio + * hardware. + * + * Locking: inside card->syscall_sem + */ + +static int via_dsp_drain_playback (struct via_info *card, + struct via_channel *chan, int nonblock) +{ + DECLARE_WAITQUEUE(wait, current); + int ret = 0; + + DPRINTK ("ENTER, nonblock = %d\n", nonblock); + + if (chan->slop_len > 0) + via_chan_flush_frag (chan); + + if (atomic_read (&chan->n_frags) == chan->frag_number) + goto out; + + via_chan_maybe_start (chan); + + add_wait_queue(&chan->wait, &wait); + for (;;) { + DPRINTK ("FRAGS %d FRAGNUM %d\n", atomic_read(&chan->n_frags), chan->frag_number); + __set_current_state(TASK_INTERRUPTIBLE); + if (atomic_read (&chan->n_frags) >= chan->frag_number) + break; + + if (nonblock) { + DPRINTK ("EXIT, returning -EAGAIN\n"); + ret = -EAGAIN; + break; + } + +#ifdef VIA_DEBUG + { + u8 r40,r41,r42,r43,r44,r48; + pci_read_config_byte (card->pdev, 0x40, &r40); + pci_read_config_byte (card->pdev, 0x41, &r41); + pci_read_config_byte (card->pdev, 0x42, &r42); + pci_read_config_byte (card->pdev, 0x43, &r43); + pci_read_config_byte (card->pdev, 0x44, &r44); + pci_read_config_byte (card->pdev, 0x48, &r48); + DPRINTK ("PCI config: %02X %02X %02X %02X %02X %02X\n", + r40,r41,r42,r43,r44,r48); + + DPRINTK ("regs==%02X %02X %02X %08X %08X %08X %08X\n", + inb (card->baseaddr + 0x00), + inb (card->baseaddr + 0x01), + inb (card->baseaddr + 0x02), + inl (card->baseaddr + 0x04), + inl (card->baseaddr + 0x0C), + inl (card->baseaddr + 0x80), + inl (card->baseaddr + 0x84)); + } + + if (!chan->is_active) + printk (KERN_ERR "sleeping but not active\n"); +#endif + + up(&card->syscall_sem); + + DPRINTK ("sleeping, nbufs=%d\n", atomic_read (&chan->n_frags)); + schedule(); + + if ((ret = via_syscall_down (card, nonblock))) + break; + + if (signal_pending (current)) { + DPRINTK ("EXIT, returning -ERESTARTSYS\n"); + ret = -ERESTARTSYS; + break; + } + } + set_current_state(TASK_RUNNING); + remove_wait_queue(&chan->wait, &wait); + +#ifdef VIA_DEBUG + { + u8 r40,r41,r42,r43,r44,r48; + pci_read_config_byte (card->pdev, 0x40, &r40); + pci_read_config_byte (card->pdev, 0x41, &r41); + pci_read_config_byte (card->pdev, 0x42, &r42); + pci_read_config_byte (card->pdev, 0x43, &r43); + pci_read_config_byte (card->pdev, 0x44, &r44); + pci_read_config_byte (card->pdev, 0x48, &r48); + DPRINTK ("PCI config: %02X %02X %02X %02X %02X %02X\n", + r40,r41,r42,r43,r44,r48); + + DPRINTK ("regs==%02X %02X %02X %08X %08X %08X %08X\n", + inb (card->baseaddr + 0x00), + inb (card->baseaddr + 0x01), + inb (card->baseaddr + 0x02), + inl (card->baseaddr + 0x04), + inl (card->baseaddr + 0x0C), + inl (card->baseaddr + 0x80), + inl (card->baseaddr + 0x84)); + + DPRINTK ("final nbufs=%d\n", atomic_read (&chan->n_frags)); + } +#endif + +out: + DPRINTK ("EXIT, returning %d\n", ret); + return ret; +} + + +/** + * via_dsp_ioctl_space - get information about channel buffering + * @card: Private info for specified board + * @chan: pointer to channel-specific info + * @arg: user buffer for returned information + * + * Handles SNDCTL_DSP_GETISPACE and SNDCTL_DSP_GETOSPACE. + * + * Locking: inside card->syscall_sem + */ + +static int via_dsp_ioctl_space (struct via_info *card, + struct via_channel *chan, + void __user *arg) +{ + audio_buf_info info; + + via_chan_set_buffering(card, chan, -1); + + info.fragstotal = chan->frag_number; + info.fragsize = chan->frag_size; + + /* number of full fragments we can read/write without blocking */ + info.fragments = atomic_read (&chan->n_frags); + + if ((chan->slop_len % chan->frag_size > 0) && (info.fragments > 0)) + info.fragments--; + + /* number of bytes that can be read or written immediately + * without blocking. + */ + info.bytes = (info.fragments * chan->frag_size); + if (chan->slop_len % chan->frag_size > 0) + info.bytes += chan->frag_size - (chan->slop_len % chan->frag_size); + + DPRINTK ("EXIT, returning fragstotal=%d, fragsize=%d, fragments=%d, bytes=%d\n", + info.fragstotal, + info.fragsize, + info.fragments, + info.bytes); + + return copy_to_user (arg, &info, sizeof (info))?-EFAULT:0; +} + + +/** + * via_dsp_ioctl_ptr - get information about hardware buffer ptr + * @card: Private info for specified board + * @chan: pointer to channel-specific info + * @arg: user buffer for returned information + * + * Handles SNDCTL_DSP_GETIPTR and SNDCTL_DSP_GETOPTR. + * + * Locking: inside card->syscall_sem + */ + +static int via_dsp_ioctl_ptr (struct via_info *card, + struct via_channel *chan, + void __user *arg) +{ + count_info info; + + spin_lock_irq (&card->lock); + + info.bytes = chan->bytes; + info.blocks = chan->n_irqs; + chan->n_irqs = 0; + + spin_unlock_irq (&card->lock); + + if (chan->is_active) { + unsigned long extra; + info.ptr = atomic_read (&chan->hw_ptr) * chan->frag_size; + extra = chan->frag_size - via_sg_offset(chan); + info.ptr += extra; + info.bytes += extra; + } else { + info.ptr = 0; + } + + DPRINTK ("EXIT, returning bytes=%d, blocks=%d, ptr=%d\n", + info.bytes, + info.blocks, + info.ptr); + + return copy_to_user (arg, &info, sizeof (info))?-EFAULT:0; +} + + +static int via_dsp_ioctl_trigger (struct via_channel *chan, int val) +{ + int enable, do_something; + + if (chan->is_record) + enable = (val & PCM_ENABLE_INPUT); + else + enable = (val & PCM_ENABLE_OUTPUT); + + if (!chan->is_enabled && enable) { + do_something = 1; + } else if (chan->is_enabled && !enable) { + do_something = -1; + } else { + do_something = 0; + } + + DPRINTK ("enable=%d, do_something=%d\n", + enable, do_something); + + if (chan->is_active && do_something) + return -EINVAL; + + if (do_something == 1) { + chan->is_enabled = 1; + via_chan_maybe_start (chan); + DPRINTK ("Triggering input\n"); + } + + else if (do_something == -1) { + chan->is_enabled = 0; + DPRINTK ("Setup input trigger\n"); + } + + return 0; +} + + +static int via_dsp_ioctl (struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + int rc, rd=0, wr=0, val=0; + struct via_info *card; + struct via_channel *chan; + int nonblock = (file->f_flags & O_NONBLOCK); + int __user *ip = (int __user *)arg; + void __user *p = (void __user *)arg; + + assert (file != NULL); + card = file->private_data; + assert (card != NULL); + + if (file->f_mode & FMODE_WRITE) + wr = 1; + if (file->f_mode & FMODE_READ) + rd = 1; + + rc = via_syscall_down (card, nonblock); + if (rc) + return rc; + rc = -EINVAL; + + switch (cmd) { + + /* OSS API version. XXX unverified */ + case OSS_GETVERSION: + DPRINTK ("ioctl OSS_GETVERSION, EXIT, returning SOUND_VERSION\n"); + rc = put_user (SOUND_VERSION, ip); + break; + + /* list of supported PCM data formats */ + case SNDCTL_DSP_GETFMTS: + DPRINTK ("DSP_GETFMTS, EXIT, returning AFMT U8|S16_LE\n"); + rc = put_user (AFMT_U8 | AFMT_S16_LE, ip); + break; + + /* query or set current channel's PCM data format */ + case SNDCTL_DSP_SETFMT: + if (get_user(val, ip)) { + rc = -EFAULT; + break; + } + DPRINTK ("DSP_SETFMT, val==%d\n", val); + if (val != AFMT_QUERY) { + rc = 0; + + if (rd) + rc = via_chan_set_fmt (card, &card->ch_in, val); + + if (rc >= 0 && wr) + rc = via_chan_set_fmt (card, &card->ch_out, val); + + if (rc < 0) + break; + + val = rc; + } else { + if ((rd && (card->ch_in.pcm_fmt & VIA_PCM_FMT_16BIT)) || + (wr && (card->ch_out.pcm_fmt & VIA_PCM_FMT_16BIT))) + val = AFMT_S16_LE; + else + val = AFMT_U8; + } + DPRINTK ("SETFMT EXIT, returning %d\n", val); + rc = put_user (val, ip); + break; + + /* query or set number of channels (1=mono, 2=stereo, 4/6 for multichannel) */ + case SNDCTL_DSP_CHANNELS: + if (get_user(val, ip)) { + rc = -EFAULT; + break; + } + DPRINTK ("DSP_CHANNELS, val==%d\n", val); + if (val != 0) { + rc = 0; + + if (rd) + rc = via_chan_set_stereo (card, &card->ch_in, val); + + if (rc >= 0 && wr) + rc = via_chan_set_stereo (card, &card->ch_out, val); + + if (rc < 0) + break; + + val = rc; + } else { + if (rd) + val = card->ch_in.channels; + else + val = card->ch_out.channels; + } + DPRINTK ("CHANNELS EXIT, returning %d\n", val); + rc = put_user (val, ip); + break; + + /* enable (val is not zero) or disable (val == 0) stereo */ + case SNDCTL_DSP_STEREO: + if (get_user(val, ip)) { + rc = -EFAULT; + break; + } + DPRINTK ("DSP_STEREO, val==%d\n", val); + rc = 0; + + if (rd) + rc = via_chan_set_stereo (card, &card->ch_in, val ? 2 : 1); + if (rc >= 0 && wr) + rc = via_chan_set_stereo (card, &card->ch_out, val ? 2 : 1); + + if (rc < 0) + break; + + val = rc - 1; + + DPRINTK ("STEREO EXIT, returning %d\n", val); + rc = put_user(val, ip); + break; + + /* query or set sampling rate */ + case SNDCTL_DSP_SPEED: + if (get_user(val, ip)) { + rc = -EFAULT; + break; + } + DPRINTK ("DSP_SPEED, val==%d\n", val); + if (val < 0) { + rc = -EINVAL; + break; + } + if (val > 0) { + rc = 0; + + if (rd) + rc = via_chan_set_speed (card, &card->ch_in, val); + if (rc >= 0 && wr) + rc = via_chan_set_speed (card, &card->ch_out, val); + + if (rc < 0) + break; + + val = rc; + } else { + if (rd) + val = card->ch_in.rate; + else if (wr) + val = card->ch_out.rate; + else + val = 0; + } + DPRINTK ("SPEED EXIT, returning %d\n", val); + rc = put_user (val, ip); + break; + + /* wait until all buffers have been played, and then stop device */ + case SNDCTL_DSP_SYNC: + DPRINTK ("DSP_SYNC\n"); + rc = 0; + if (wr) { + DPRINTK ("SYNC EXIT (after calling via_dsp_drain_playback)\n"); + rc = via_dsp_drain_playback (card, &card->ch_out, nonblock); + } + break; + + /* stop recording/playback immediately */ + case SNDCTL_DSP_RESET: + DPRINTK ("DSP_RESET\n"); + if (rd) { + via_chan_clear (card, &card->ch_in); + card->ch_in.frag_number = 0; + card->ch_in.frag_size = 0; + atomic_set(&card->ch_in.n_frags, 0); + } + + if (wr) { + via_chan_clear (card, &card->ch_out); + card->ch_out.frag_number = 0; + card->ch_out.frag_size = 0; + atomic_set(&card->ch_out.n_frags, 0); + } + + rc = 0; + break; + + case SNDCTL_DSP_NONBLOCK: + file->f_flags |= O_NONBLOCK; + rc = 0; + break; + + /* obtain bitmask of device capabilities, such as mmap, full duplex, etc. */ + case SNDCTL_DSP_GETCAPS: + DPRINTK ("DSP_GETCAPS\n"); + rc = put_user(VIA_DSP_CAP, ip); + break; + + /* obtain buffer fragment size */ + case SNDCTL_DSP_GETBLKSIZE: + DPRINTK ("DSP_GETBLKSIZE\n"); + + if (rd) { + via_chan_set_buffering(card, &card->ch_in, -1); + rc = put_user(card->ch_in.frag_size, ip); + } else if (wr) { + via_chan_set_buffering(card, &card->ch_out, -1); + rc = put_user(card->ch_out.frag_size, ip); + } + break; + + /* obtain information about input buffering */ + case SNDCTL_DSP_GETISPACE: + DPRINTK ("DSP_GETISPACE\n"); + if (rd) + rc = via_dsp_ioctl_space (card, &card->ch_in, p); + break; + + /* obtain information about output buffering */ + case SNDCTL_DSP_GETOSPACE: + DPRINTK ("DSP_GETOSPACE\n"); + if (wr) + rc = via_dsp_ioctl_space (card, &card->ch_out, p); + break; + + /* obtain information about input hardware pointer */ + case SNDCTL_DSP_GETIPTR: + DPRINTK ("DSP_GETIPTR\n"); + if (rd) + rc = via_dsp_ioctl_ptr (card, &card->ch_in, p); + break; + + /* obtain information about output hardware pointer */ + case SNDCTL_DSP_GETOPTR: + DPRINTK ("DSP_GETOPTR\n"); + if (wr) + rc = via_dsp_ioctl_ptr (card, &card->ch_out, p); + break; + + /* return number of bytes remaining to be played by DMA engine */ + case SNDCTL_DSP_GETODELAY: + { + DPRINTK ("DSP_GETODELAY\n"); + + chan = &card->ch_out; + + if (!wr) + break; + + if (chan->is_active) { + + val = chan->frag_number - atomic_read (&chan->n_frags); + + assert(val >= 0); + + if (val > 0) { + val *= chan->frag_size; + val -= chan->frag_size - via_sg_offset(chan); + } + val += chan->slop_len % chan->frag_size; + } else + val = 0; + + assert (val <= (chan->frag_size * chan->frag_number)); + + DPRINTK ("GETODELAY EXIT, val = %d bytes\n", val); + rc = put_user (val, ip); + break; + } + + /* handle the quick-start of a channel, + * or the notification that a quick-start will + * occur in the future + */ + case SNDCTL_DSP_SETTRIGGER: + if (get_user(val, ip)) { + rc = -EFAULT; + break; + } + DPRINTK ("DSP_SETTRIGGER, rd=%d, wr=%d, act=%d/%d, en=%d/%d\n", + rd, wr, card->ch_in.is_active, card->ch_out.is_active, + card->ch_in.is_enabled, card->ch_out.is_enabled); + + rc = 0; + + if (rd) + rc = via_dsp_ioctl_trigger (&card->ch_in, val); + + if (!rc && wr) + rc = via_dsp_ioctl_trigger (&card->ch_out, val); + + break; + + case SNDCTL_DSP_GETTRIGGER: + val = 0; + if ((file->f_mode & FMODE_READ) && card->ch_in.is_enabled) + val |= PCM_ENABLE_INPUT; + if ((file->f_mode & FMODE_WRITE) && card->ch_out.is_enabled) + val |= PCM_ENABLE_OUTPUT; + rc = put_user(val, ip); + break; + + /* Enable full duplex. Since we do this as soon as we are opened + * with O_RDWR, this is mainly a no-op that always returns success. + */ + case SNDCTL_DSP_SETDUPLEX: + DPRINTK ("DSP_SETDUPLEX\n"); + if (!rd || !wr) + break; + rc = 0; + break; + + /* set fragment size. implemented as a successful no-op for now */ + case SNDCTL_DSP_SETFRAGMENT: + if (get_user(val, ip)) { + rc = -EFAULT; + break; + } + DPRINTK ("DSP_SETFRAGMENT, val==%d\n", val); + + if (rd) + rc = via_chan_set_buffering(card, &card->ch_in, val); + + if (wr) + rc = via_chan_set_buffering(card, &card->ch_out, val); + + DPRINTK ("SNDCTL_DSP_SETFRAGMENT (fragshift==0x%04X (%d), maxfrags==0x%04X (%d))\n", + val & 0xFFFF, + val & 0xFFFF, + (val >> 16) & 0xFFFF, + (val >> 16) & 0xFFFF); + + rc = 0; + break; + + /* inform device of an upcoming pause in input (or output). */ + case SNDCTL_DSP_POST: + DPRINTK ("DSP_POST\n"); + if (wr) { + if (card->ch_out.slop_len > 0) + via_chan_flush_frag (&card->ch_out); + via_chan_maybe_start (&card->ch_out); + } + + rc = 0; + break; + + /* not implemented */ + default: + DPRINTK ("unhandled ioctl, cmd==%u, arg==%p\n", + cmd, p); + break; + } + + up (&card->syscall_sem); + DPRINTK ("EXIT, returning %d\n", rc); + return rc; +} + + +static int via_dsp_open (struct inode *inode, struct file *file) +{ + int minor = iminor(inode); + struct via_info *card; + struct pci_dev *pdev = NULL; + struct via_channel *chan; + struct pci_driver *drvr; + int nonblock = (file->f_flags & O_NONBLOCK); + + DPRINTK ("ENTER, minor=%d, file->f_mode=0x%x\n", minor, file->f_mode); + + if (!(file->f_mode & (FMODE_READ | FMODE_WRITE))) { + DPRINTK ("EXIT, returning -EINVAL\n"); + return -EINVAL; + } + + card = NULL; + while ((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev)) != NULL) { + drvr = pci_dev_driver (pdev); + if (drvr == &via_driver) { + assert (pci_get_drvdata (pdev) != NULL); + + card = pci_get_drvdata (pdev); + DPRINTK ("dev_dsp = %d, minor = %d, assn = %d\n", + card->dev_dsp, minor, + (card->dev_dsp ^ minor) & ~0xf); + + if (((card->dev_dsp ^ minor) & ~0xf) == 0) + goto match; + } + } + + DPRINTK ("no matching %s found\n", card ? "minor" : "driver"); + return -ENODEV; + +match: + if (nonblock) { + if (down_trylock (&card->open_sem)) { + DPRINTK ("EXIT, returning -EAGAIN\n"); + return -EAGAIN; + } + } else { + if (down_interruptible (&card->open_sem)) { + DPRINTK ("EXIT, returning -ERESTARTSYS\n"); + return -ERESTARTSYS; + } + } + + file->private_data = card; + DPRINTK ("file->f_mode == 0x%x\n", file->f_mode); + + /* handle input from analog source */ + if (file->f_mode & FMODE_READ) { + chan = &card->ch_in; + + via_chan_init (card, chan); + + /* why is this forced to 16-bit stereo in all drivers? */ + chan->pcm_fmt = VIA_PCM_FMT_16BIT | VIA_PCM_FMT_STEREO; + chan->channels = 2; + + // TO DO - use FIFO: via_capture_fifo(card, 1); + via_chan_pcm_fmt (chan, 0); + via_set_rate (card->ac97, chan, 44100); + } + + /* handle output to analog source */ + if (file->f_mode & FMODE_WRITE) { + chan = &card->ch_out; + + via_chan_init (card, chan); + + if (file->f_mode & FMODE_READ) { + /* if in duplex mode make the recording and playback channels + have the same settings */ + chan->pcm_fmt = VIA_PCM_FMT_16BIT | VIA_PCM_FMT_STEREO; + chan->channels = 2; + via_chan_pcm_fmt (chan, 0); + via_set_rate (card->ac97, chan, 44100); + } else { + if ((minor & 0xf) == SND_DEV_DSP16) { + chan->pcm_fmt = VIA_PCM_FMT_16BIT; + via_chan_pcm_fmt (chan, 0); + via_set_rate (card->ac97, chan, 44100); + } else { + via_chan_pcm_fmt (chan, 1); + via_set_rate (card->ac97, chan, 8000); + } + } + } + + DPRINTK ("EXIT, returning 0\n"); + return nonseekable_open(inode, file); +} + + +static int via_dsp_release(struct inode *inode, struct file *file) +{ + struct via_info *card; + int nonblock = (file->f_flags & O_NONBLOCK); + int rc; + + DPRINTK ("ENTER\n"); + + assert (file != NULL); + card = file->private_data; + assert (card != NULL); + + rc = via_syscall_down (card, nonblock); + if (rc) { + DPRINTK ("EXIT (syscall_down error), rc=%d\n", rc); + return rc; + } + + if (file->f_mode & FMODE_WRITE) { + rc = via_dsp_drain_playback (card, &card->ch_out, nonblock); + if (rc && rc != -ERESTARTSYS) /* Nobody needs to know about ^C */ + printk (KERN_DEBUG "via_audio: ignoring drain playback error %d\n", rc); + + via_chan_free (card, &card->ch_out); + via_chan_buffer_free(card, &card->ch_out); + } + + if (file->f_mode & FMODE_READ) { + via_chan_free (card, &card->ch_in); + via_chan_buffer_free (card, &card->ch_in); + } + + up (&card->syscall_sem); + up (&card->open_sem); + + DPRINTK ("EXIT, returning 0\n"); + return 0; +} + + +/**************************************************************** + * + * Chip setup and kernel registration + * + * + */ + +static int __devinit via_init_one (struct pci_dev *pdev, const struct pci_device_id *id) +{ +#ifdef CONFIG_MIDI_VIA82CXXX + u8 r42; +#endif + int rc; + struct via_info *card; + static int printed_version; + + DPRINTK ("ENTER\n"); + + if (printed_version++ == 0) + printk (KERN_INFO "Via 686a/8233/8235 audio driver " VIA_VERSION "\n"); + + rc = pci_enable_device (pdev); + if (rc) + goto err_out; + + rc = pci_request_regions (pdev, "via82cxxx_audio"); + if (rc) + goto err_out_disable; + + rc = pci_set_dma_mask(pdev, 0xffffffffULL); + if (rc) + goto err_out_res; + rc = pci_set_consistent_dma_mask(pdev, 0xffffffffULL); + if (rc) + goto err_out_res; + + card = kmalloc (sizeof (*card), GFP_KERNEL); + if (!card) { + printk (KERN_ERR PFX "out of memory, aborting\n"); + rc = -ENOMEM; + goto err_out_res; + } + + pci_set_drvdata (pdev, card); + + memset (card, 0, sizeof (*card)); + card->pdev = pdev; + card->baseaddr = pci_resource_start (pdev, 0); + card->card_num = via_num_cards++; + spin_lock_init (&card->lock); + spin_lock_init (&card->ac97_lock); + init_MUTEX (&card->syscall_sem); + init_MUTEX (&card->open_sem); + + /* we must init these now, in case the intr handler needs them */ + via_chan_init_defaults (card, &card->ch_out); + via_chan_init_defaults (card, &card->ch_in); + via_chan_init_defaults (card, &card->ch_fm); + + /* if BAR 2 is present, chip is Rev H or later, + * which means it has a few extra features */ + if (pci_resource_start (pdev, 2) > 0) + card->rev_h = 1; + + /* Overkill for now, but more flexible done right */ + + card->intmask = id->driver_data; + card->legacy = !card->intmask; + card->sixchannel = id->driver_data; + + if(card->sixchannel) + printk(KERN_INFO PFX "Six channel audio available\n"); + if (pdev->irq < 1) { + printk (KERN_ERR PFX "invalid PCI IRQ %d, aborting\n", pdev->irq); + rc = -ENODEV; + goto err_out_kfree; + } + + if (!(pci_resource_flags (pdev, 0) & IORESOURCE_IO)) { + printk (KERN_ERR PFX "unable to locate I/O resources, aborting\n"); + rc = -ENODEV; + goto err_out_kfree; + } + + pci_set_master(pdev); + + /* + * init AC97 mixer and codec + */ + rc = via_ac97_init (card); + if (rc) { + printk (KERN_ERR PFX "AC97 init failed, aborting\n"); + goto err_out_kfree; + } + + /* + * init DSP device + */ + rc = via_dsp_init (card); + if (rc) { + printk (KERN_ERR PFX "DSP device init failed, aborting\n"); + goto err_out_have_mixer; + } + + /* + * init and turn on interrupts, as the last thing we do + */ + rc = via_interrupt_init (card); + if (rc) { + printk (KERN_ERR PFX "interrupt init failed, aborting\n"); + goto err_out_have_dsp; + } + + printk (KERN_INFO PFX "board #%d at 0x%04lX, IRQ %d\n", + card->card_num + 1, card->baseaddr, pdev->irq); + +#ifdef CONFIG_MIDI_VIA82CXXX + /* Disable by default */ + card->midi_info.io_base = 0; + + if(card->legacy) + { + pci_read_config_byte (pdev, 0x42, &r42); + /* Disable MIDI interrupt */ + pci_write_config_byte (pdev, 0x42, r42 | VIA_CR42_MIDI_IRQMASK); + if (r42 & VIA_CR42_MIDI_ENABLE) + { + if (r42 & VIA_CR42_MIDI_PNP) /* Address selected by iobase 2 - not tested */ + card->midi_info.io_base = pci_resource_start (pdev, 2); + else /* Address selected by byte 0x43 */ + { + u8 r43; + pci_read_config_byte (pdev, 0x43, &r43); + card->midi_info.io_base = 0x300 + ((r43 & 0x0c) << 2); + } + + card->midi_info.irq = -pdev->irq; + if (probe_uart401(& card->midi_info, THIS_MODULE)) + { + card->midi_devc=midi_devs[card->midi_info.slots[4]]->devc; + pci_write_config_byte(pdev, 0x42, r42 & ~VIA_CR42_MIDI_IRQMASK); + printk("Enabled Via MIDI\n"); + } + } + } +#endif + + DPRINTK ("EXIT, returning 0\n"); + return 0; + +err_out_have_dsp: + via_dsp_cleanup (card); + +err_out_have_mixer: + via_ac97_cleanup (card); + +err_out_kfree: +#ifndef VIA_NDEBUG + memset (card, 0xAB, sizeof (*card)); /* poison memory */ +#endif + kfree (card); + +err_out_res: + pci_release_regions (pdev); + +err_out_disable: + pci_disable_device (pdev); + +err_out: + pci_set_drvdata (pdev, NULL); + DPRINTK ("EXIT - returning %d\n", rc); + return rc; +} + + +static void __devexit via_remove_one (struct pci_dev *pdev) +{ + struct via_info *card; + + DPRINTK ("ENTER\n"); + + assert (pdev != NULL); + card = pci_get_drvdata (pdev); + assert (card != NULL); + +#ifdef CONFIG_MIDI_VIA82CXXX + if (card->midi_info.io_base) + unload_uart401(&card->midi_info); +#endif + + free_irq (card->pdev->irq, card); + via_dsp_cleanup (card); + via_ac97_cleanup (card); + +#ifndef VIA_NDEBUG + memset (card, 0xAB, sizeof (*card)); /* poison memory */ +#endif + kfree (card); + + pci_set_drvdata (pdev, NULL); + + pci_release_regions (pdev); + pci_disable_device (pdev); + pci_set_power_state (pdev, 3); /* ...zzzzzz */ + + DPRINTK ("EXIT\n"); + return; +} + + +/**************************************************************** + * + * Driver initialization and cleanup + * + * + */ + +static int __init init_via82cxxx_audio(void) +{ + int rc; + + DPRINTK ("ENTER\n"); + + rc = pci_register_driver (&via_driver); + if (rc) { + DPRINTK ("EXIT, returning %d\n", rc); + return rc; + } + + DPRINTK ("EXIT, returning 0\n"); + return 0; +} + + +static void __exit cleanup_via82cxxx_audio(void) +{ + DPRINTK ("ENTER\n"); + + pci_unregister_driver (&via_driver); + + DPRINTK ("EXIT\n"); +} + + +module_init(init_via82cxxx_audio); +module_exit(cleanup_via82cxxx_audio); + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("DSP audio and mixer driver for Via 82Cxxx audio devices"); +MODULE_LICENSE("GPL"); + -- cgit v1.2.2