From 98322f22eca889478045cf896b572250d03dc45f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 26 Jan 2009 21:35:35 -0800 Subject: udp: optimize bind(0) if many ports are in use commit 9088c5609584684149f3fb5b065aa7f18dcb03ff (udp: Improve port randomization) introduced a regression for UDP bind() syscall to null port (getting a random port) in case lot of ports are already in use. This is because we do about 28000 scans of very long chains (220 sockets per chain), with many spin_lock_bh()/spin_unlock_bh() calls. Fix this using a bitmap (64 bytes for current value of UDP_HTABLE_SIZE) so that we scan chains at most once. Instead of 250 ms per bind() call, we get after patch a time of 2.9 ms Based on a report from Vitaly Mayatskikh Reported-by: Vitaly Mayatskikh Signed-off-by: Eric Dumazet Tested-by: Vitaly Mayatskikh Signed-off-by: David S. Miller --- net/ipv4/udp.c | 55 +++++++++++++++++++++++++++++++++++++++---------------- 1 file changed, 39 insertions(+), 16 deletions(-) (limited to 'net') diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index cf5ab0581eba..b7faffe5c029 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -120,8 +120,11 @@ EXPORT_SYMBOL(sysctl_udp_wmem_min); atomic_t udp_memory_allocated; EXPORT_SYMBOL(udp_memory_allocated); +#define PORTS_PER_CHAIN (65536 / UDP_HTABLE_SIZE) + static int udp_lib_lport_inuse(struct net *net, __u16 num, const struct udp_hslot *hslot, + unsigned long *bitmap, struct sock *sk, int (*saddr_comp)(const struct sock *sk1, const struct sock *sk2)) @@ -132,12 +135,17 @@ static int udp_lib_lport_inuse(struct net *net, __u16 num, sk_nulls_for_each(sk2, node, &hslot->head) if (net_eq(sock_net(sk2), net) && sk2 != sk && - sk2->sk_hash == num && + (bitmap || sk2->sk_hash == num) && (!sk2->sk_reuse || !sk->sk_reuse) && (!sk2->sk_bound_dev_if || !sk->sk_bound_dev_if || sk2->sk_bound_dev_if == sk->sk_bound_dev_if) && - (*saddr_comp)(sk, sk2)) - return 1; + (*saddr_comp)(sk, sk2)) { + if (bitmap) + __set_bit(sk2->sk_hash / UDP_HTABLE_SIZE, + bitmap); + else + return 1; + } return 0; } @@ -160,32 +168,47 @@ int udp_lib_get_port(struct sock *sk, unsigned short snum, if (!snum) { int low, high, remaining; unsigned rand; - unsigned short first; + unsigned short first, last; + DECLARE_BITMAP(bitmap, PORTS_PER_CHAIN); inet_get_local_port_range(&low, &high); remaining = (high - low) + 1; rand = net_random(); - snum = first = rand % remaining + low; - rand |= 1; - for (;;) { - hslot = &udptable->hash[udp_hashfn(net, snum)]; + first = (((u64)rand * remaining) >> 32) + low; + /* + * force rand to be an odd multiple of UDP_HTABLE_SIZE + */ + rand = (rand | 1) * UDP_HTABLE_SIZE; + for (last = first + UDP_HTABLE_SIZE; first != last; first++) { + hslot = &udptable->hash[udp_hashfn(net, first)]; + bitmap_zero(bitmap, PORTS_PER_CHAIN); spin_lock_bh(&hslot->lock); - if (!udp_lib_lport_inuse(net, snum, hslot, sk, saddr_comp)) - break; - spin_unlock_bh(&hslot->lock); + udp_lib_lport_inuse(net, snum, hslot, bitmap, sk, + saddr_comp); + + snum = first; + /* + * Iterate on all possible values of snum for this hash. + * Using steps of an odd multiple of UDP_HTABLE_SIZE + * give us randomization and full range coverage. + */ do { - snum = snum + rand; - } while (snum < low || snum > high); - if (snum == first) - goto fail; + if (low <= snum && snum <= high && + !test_bit(snum / UDP_HTABLE_SIZE, bitmap)) + goto found; + snum += rand; + } while (snum != first); + spin_unlock_bh(&hslot->lock); } + goto fail; } else { hslot = &udptable->hash[udp_hashfn(net, snum)]; spin_lock_bh(&hslot->lock); - if (udp_lib_lport_inuse(net, snum, hslot, sk, saddr_comp)) + if (udp_lib_lport_inuse(net, snum, hslot, NULL, sk, saddr_comp)) goto fail_unlock; } +found: inet_sk(sk)->num = snum; sk->sk_hash = snum; if (sk_unhashed(sk)) { -- cgit v1.2.2 From 9fa5fdf291c9b58b1cb8b4bb2a0ee57efa21d635 Mon Sep 17 00:00:00 2001 From: Dimitris Michailidis Date: Mon, 26 Jan 2009 22:15:31 -0800 Subject: tcp: Fix length tcp_splice_data_recv passes to skb_splice_bits. tcp_splice_data_recv has two lengths to consider: the len parameter it gets from tcp_read_sock, which specifies the amount of data in the skb, and rd_desc->count, which is the amount of data the splice caller still wants. Currently it passes just the latter to skb_splice_bits, which then splices min(rd_desc->count, skb->len - offset) bytes. Most of the time this is fine, except when the skb contains urgent data. In that case len goes only up to the urgent byte and is less than skb->len - offset. By ignoring len tcp_splice_data_recv may a) splice data tcp_read_sock told it not to, b) return to tcp_read_sock a value > len. Now, tcp_read_sock doesn't handle used > len and leaves the socket in a bad state (both sk_receive_queue and copied_seq are bad at that point) resulting in duplicated data and corruption. Fix by passing min(rd_desc->count, len) to skb_splice_bits. Signed-off-by: Dimitris Michailidis Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'net') diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 0cd71b84e483..76b148bcb0dc 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -524,7 +524,8 @@ static int tcp_splice_data_recv(read_descriptor_t *rd_desc, struct sk_buff *skb, struct tcp_splice_state *tss = rd_desc->arg.data; int ret; - ret = skb_splice_bits(skb, offset, tss->pipe, rd_desc->count, tss->flags); + ret = skb_splice_bits(skb, offset, tss->pipe, min(rd_desc->count, len), + tss->flags); if (ret > 0) rd_desc->count -= ret; return ret; -- cgit v1.2.2 From 6c06a478c9e59d1584a5dc1b2b3519bae5d6546a Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 27 Jan 2009 22:30:19 -0800 Subject: net: fix xfrm reverse flow lookup for icmp6 This patch fixes the xfrm reverse flow lookup for icmp6 so that icmp6 packets don't get lost over ipsec tunnels. Similar patch is in RHEL5 kernel for a quite long time and I do not see why it isn't in mainline. Signed-off-by: Jiri Pirko Acked-by: Herbert Xu Signed-off-by: David S. Miller --- net/ipv6/icmp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'net') diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c index 4f433847d95f..36dff8807183 100644 --- a/net/ipv6/icmp.c +++ b/net/ipv6/icmp.c @@ -443,10 +443,10 @@ void icmpv6_send(struct sk_buff *skb, int type, int code, __u32 info, if (xfrm_decode_session_reverse(skb, &fl2, AF_INET6)) goto relookup_failed; - if (ip6_dst_lookup(sk, &dst2, &fl)) + if (ip6_dst_lookup(sk, &dst2, &fl2)) goto relookup_failed; - err = xfrm_lookup(net, &dst2, &fl, sk, XFRM_LOOKUP_ICMP); + err = xfrm_lookup(net, &dst2, &fl2, sk, XFRM_LOOKUP_ICMP); switch (err) { case 0: dst_release(dst); -- cgit v1.2.2 From 1d6e55f195128813f96458203a9fa14204f9251e Mon Sep 17 00:00:00 2001 From: Thomas Goff Date: Tue, 27 Jan 2009 22:39:59 -0800 Subject: IPv6: Fix multicast routing bugs. This patch addresses the IPv6 multicast routing issues described below. It was tested with XORP 1.4/1.5 as the IPv6 PIM-SM routing daemon against FreeBSD peers. net/ipv6/ip6_input.c: - Don't try to forward link-local multicast packets. - Don't reset skb2->dev before calling ip6_mr_input() so packets can be identified as coming from the PIM register vif properly. net/ipv6/ip6mr.c: - Fix incoming PIM register messages processing: * The IPv6 pseudo-header should be included when checksumming PIM messages (RFC 4601 section 4.9; RFC 3973 section 4.7.1). * Packets decapsulated from PIM register messages should have skb->protocol ETH_P_IPV6. - Enable/disable IPv6 multicast forwarding on the corresponding interface when a routing daemon adds/removes a multicast virtual interface. - Remove incorrect skb_pull() to fix userspace signaling. - Enable/disable global IPv6 multicast forwarding when an IPv6 multicast routing socket is opened/closed. net/ipv6/route.c: - Don't use strict routing logic for packets decapsulated from PIM register messages (similar to disabling rp_filter for the IPv4 case). Signed-off-by: Thomas Goff Reviewed-by: Fred Templin Signed-off-by: David S. Miller --- net/ipv6/ip6_input.c | 2 +- net/ipv6/ip6mr.c | 23 ++++++++++++++++++----- net/ipv6/route.c | 2 +- 3 files changed, 20 insertions(+), 7 deletions(-) (limited to 'net') diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c index 936f48946e20..f171e8dbac91 100644 --- a/net/ipv6/ip6_input.c +++ b/net/ipv6/ip6_input.c @@ -255,6 +255,7 @@ int ip6_mc_input(struct sk_buff *skb) * IPv6 multicast router mode is now supported ;) */ if (dev_net(skb->dev)->ipv6.devconf_all->mc_forwarding && + !(ipv6_addr_type(&hdr->daddr) & IPV6_ADDR_LINKLOCAL) && likely(!(IP6CB(skb)->flags & IP6SKB_FORWARDED))) { /* * Okay, we try to forward - split and duplicate @@ -316,7 +317,6 @@ int ip6_mc_input(struct sk_buff *skb) } if (skb2) { - skb2->dev = skb2->dst->dev; ip6_mr_input(skb2); } } diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c index 3c51b2d827f4..d19a84b79503 100644 --- a/net/ipv6/ip6mr.c +++ b/net/ipv6/ip6mr.c @@ -365,7 +365,9 @@ static int pim6_rcv(struct sk_buff *skb) pim = (struct pimreghdr *)skb_transport_header(skb); if (pim->type != ((PIM_VERSION << 4) | PIM_REGISTER) || (pim->flags & PIM_NULL_REGISTER) || - (ip_compute_csum((void *)pim, sizeof(*pim)) != 0 && + (csum_ipv6_magic(&ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr, + sizeof(*pim), IPPROTO_PIM, + csum_partial((void *)pim, sizeof(*pim), 0)) && csum_fold(skb_checksum(skb, 0, skb->len, 0)))) goto drop; @@ -392,7 +394,7 @@ static int pim6_rcv(struct sk_buff *skb) skb_pull(skb, (u8 *)encap - skb->data); skb_reset_network_header(skb); skb->dev = reg_dev; - skb->protocol = htons(ETH_P_IP); + skb->protocol = htons(ETH_P_IPV6); skb->ip_summed = 0; skb->pkt_type = PACKET_HOST; dst_release(skb->dst); @@ -481,6 +483,7 @@ static int mif6_delete(struct net *net, int vifi) { struct mif_device *v; struct net_device *dev; + struct inet6_dev *in6_dev; if (vifi < 0 || vifi >= net->ipv6.maxvif) return -EADDRNOTAVAIL; @@ -513,6 +516,10 @@ static int mif6_delete(struct net *net, int vifi) dev_set_allmulti(dev, -1); + in6_dev = __in6_dev_get(dev); + if (in6_dev) + in6_dev->cnf.mc_forwarding--; + if (v->flags & MIFF_REGISTER) unregister_netdevice(dev); @@ -622,6 +629,7 @@ static int mif6_add(struct net *net, struct mif6ctl *vifc, int mrtsock) int vifi = vifc->mif6c_mifi; struct mif_device *v = &net->ipv6.vif6_table[vifi]; struct net_device *dev; + struct inet6_dev *in6_dev; int err; /* Is vif busy ? */ @@ -662,6 +670,10 @@ static int mif6_add(struct net *net, struct mif6ctl *vifc, int mrtsock) return -EINVAL; } + in6_dev = __in6_dev_get(dev); + if (in6_dev) + in6_dev->cnf.mc_forwarding++; + /* * Fill in the VIF structures */ @@ -838,8 +850,6 @@ static int ip6mr_cache_report(struct net *net, struct sk_buff *pkt, mifi_t mifi, skb->dst = dst_clone(pkt->dst); skb->ip_summed = CHECKSUM_UNNECESSARY; - - skb_pull(skb, sizeof(struct ipv6hdr)); } if (net->ipv6.mroute6_sk == NULL) { @@ -1222,8 +1232,10 @@ static int ip6mr_sk_init(struct sock *sk) rtnl_lock(); write_lock_bh(&mrt_lock); - if (likely(net->ipv6.mroute6_sk == NULL)) + if (likely(net->ipv6.mroute6_sk == NULL)) { net->ipv6.mroute6_sk = sk; + net->ipv6.devconf_all->mc_forwarding++; + } else err = -EADDRINUSE; write_unlock_bh(&mrt_lock); @@ -1242,6 +1254,7 @@ int ip6mr_sk_done(struct sock *sk) if (sk == net->ipv6.mroute6_sk) { write_lock_bh(&mrt_lock); net->ipv6.mroute6_sk = NULL; + net->ipv6.devconf_all->mc_forwarding--; write_unlock_bh(&mrt_lock); mroute_clean_tables(net); diff --git a/net/ipv6/route.c b/net/ipv6/route.c index c4a59824ac2c..9c574235c905 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -794,7 +794,7 @@ void ip6_route_input(struct sk_buff *skb) .proto = iph->nexthdr, }; - if (rt6_need_strict(&iph->daddr)) + if (rt6_need_strict(&iph->daddr) && skb->dev->type != ARPHRD_PIMREG) flags |= RT6_LOOKUP_F_IFACE; skb->dst = fib6_rule_lookup(net, &fl, flags, ip6_pol_route_input); -- cgit v1.2.2 From a4e6db07984529847c6ad8bc616485e721dcb809 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 27 Jan 2009 22:41:03 -0800 Subject: ipv6: Make mc_forwarding sysctl read-only. The kernel manages this value internally, as necessary, as VIFs are added/removed and as multicast routers are registered and deregistered. Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net') diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index e92ad8455c63..f9afb452249c 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -4250,7 +4250,7 @@ static struct addrconf_sysctl_table .procname = "mc_forwarding", .data = &ipv6_devconf.mc_forwarding, .maxlen = sizeof(int), - .mode = 0644, + .mode = 0444, .proc_handler = proc_dointvec, }, #endif -- cgit v1.2.2 From 615aab4b75dfa77b00c372330d6f70edd2458bf9 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 22 Jan 2009 15:05:46 -0800 Subject: cfg80211: Fix sanity check on 5 GHz when processing country IE This fixes two issues with the sanity check loop when processing the country IE: 1. Do not use frequency for the current subband channel check, this was a big fat typo. 2. Apply the 5 GHz 4-channel steps when considering max channel on each subband as was done with a recent patch. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- net/wireless/reg.c | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-) (limited to 'net') diff --git a/net/wireless/reg.c b/net/wireless/reg.c index bc494cef2102..61698095e1ad 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -498,6 +498,7 @@ static struct ieee80211_regdomain *country_ie_2_rd( * calculate the number of reg rules we will need. We will need one * for each channel subband */ while (country_ie_len >= 3) { + int end_channel = 0; struct ieee80211_country_ie_triplet *triplet = (struct ieee80211_country_ie_triplet *) country_ie; int cur_sub_max_channel = 0, cur_channel = 0; @@ -509,9 +510,25 @@ static struct ieee80211_regdomain *country_ie_2_rd( continue; } + /* 2 GHz */ + if (triplet->chans.first_channel <= 14) + end_channel = triplet->chans.first_channel + + triplet->chans.num_channels; + else + /* + * 5 GHz -- For example in country IEs if the first + * channel given is 36 and the number of channels is 4 + * then the individual channel numbers defined for the + * 5 GHz PHY by these parameters are: 36, 40, 44, and 48 + * and not 36, 37, 38, 39. + * + * See: http://tinyurl.com/11d-clarification + */ + end_channel = triplet->chans.first_channel + + (4 * (triplet->chans.num_channels - 1)); + cur_channel = triplet->chans.first_channel; - cur_sub_max_channel = ieee80211_channel_to_frequency( - cur_channel + triplet->chans.num_channels); + cur_sub_max_channel = end_channel; /* Basic sanity check */ if (cur_sub_max_channel < cur_channel) @@ -590,15 +607,6 @@ static struct ieee80211_regdomain *country_ie_2_rd( end_channel = triplet->chans.first_channel + triplet->chans.num_channels; else - /* - * 5 GHz -- For example in country IEs if the first - * channel given is 36 and the number of channels is 4 - * then the individual channel numbers defined for the - * 5 GHz PHY by these parameters are: 36, 40, 44, and 48 - * and not 36, 37, 38, 39. - * - * See: http://tinyurl.com/11d-clarification - */ end_channel = triplet->chans.first_channel + (4 * (triplet->chans.num_channels - 1)); -- cgit v1.2.2 From 667ecd010d870f861a9e276aaaca8cb443ded8b3 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Thu, 22 Jan 2009 15:05:43 -0800 Subject: cfg80211: print correct intersected regulatory domain When CONFIG_CFG80211_REG_DEBUG is enabled and an intersection occurs we are printing the regulatory domain passed by CRDA and indicating its the intersected regulatory domain. Lets fix this and print the intersection as originally intended. Signed-off-by: Luis R. Rodriguez Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/reg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net') diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 61698095e1ad..85c9034c59b2 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1284,7 +1284,7 @@ static void reg_country_ie_process_debug( if (intersected_rd) { printk(KERN_DEBUG "cfg80211: We intersect both of these " "and get:\n"); - print_regdomain_info(rd); + print_regdomain_info(intersected_rd); return; } printk(KERN_DEBUG "cfg80211: Intersection between both failed\n"); -- cgit v1.2.2 From 95e3b24cfb4ec0479d2c42f7a1780d68063a542a Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 29 Jan 2009 16:07:52 -0800 Subject: net: Fix frag_list handling in skb_seq_read The frag_list handling was broken in skb_seq_read: 1) We didn't add the stepped offset when looking at the head are of fragments other than the first. 2) We didn't take the stepped offset away when setting the data pointer in the head area. 3) The frag index wasn't reset. This patch fixes both issues. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/core/skbuff.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'net') diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 2e5f2ca3bdcd..f23fd43539ed 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -2212,10 +2212,10 @@ unsigned int skb_seq_read(unsigned int consumed, const u8 **data, return 0; next_skb: - block_limit = skb_headlen(st->cur_skb); + block_limit = skb_headlen(st->cur_skb) + st->stepped_offset; if (abs_offset < block_limit) { - *data = st->cur_skb->data + abs_offset; + *data = st->cur_skb->data + (abs_offset - st->stepped_offset); return block_limit - abs_offset; } @@ -2257,6 +2257,7 @@ next_skb: } else if (st->root_skb == st->cur_skb && skb_shinfo(st->root_skb)->frag_list) { st->cur_skb = skb_shinfo(st->root_skb)->frag_list; + st->frag_idx = 0; goto next_skb; } -- cgit v1.2.2 From 71b3346d182355f19509fadb8fe45114a35cc499 Mon Sep 17 00:00:00 2001 From: Shyam Iyer Date: Thu, 29 Jan 2009 16:12:42 -0800 Subject: net: Fix OOPS in skb_seq_read(). It oopsd for me in skb_seq_read. addr2line said it was linux-2.6/net/core/skbuff.c:2228, which is this line: while (st->frag_idx < skb_shinfo(st->cur_skb)->nr_frags) { I added some printks in there and it looks like we hit this: } else if (st->root_skb == st->cur_skb && skb_shinfo(st->root_skb)->frag_list) { st->cur_skb = skb_shinfo(st->root_skb)->frag_list; st->frag_idx = 0; goto next_skb; } Actually I did some testing and added a few printks and found that the st->cur_skb->data was 0 and hence the ptr used by iscsi_tcp was null. This caused the kernel panic. if (abs_offset < block_limit) { - *data = st->cur_skb->data + abs_offset; + *data = st->cur_skb->data + (abs_offset - st->stepped_offset); I enabled the debug_tcp and with a few printks found that the code did not go to the next_skb label and could find that the sequence being followed was this - It hit this if condition - if (st->cur_skb->next) { st->cur_skb = st->cur_skb->next; st->frag_idx = 0; goto next_skb; And so, now the st pointer is shifted to the next skb whereas actually it should have hit the second else if first since the data is in the frag_list. else if (st->root_skb == st->cur_skb && skb_shinfo(st->root_skb)->frag_list) { st->cur_skb = skb_shinfo(st->root_skb)->frag_list; goto next_skb; } Reversing the two conditions the attached patch fixes the issue for me on top of Herbert's patches. Signed-off-by: Shyam Iyer Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/core/skbuff.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'net') diff --git a/net/core/skbuff.c b/net/core/skbuff.c index f23fd43539ed..da74b844f4ea 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -2250,13 +2250,13 @@ next_skb: st->frag_data = NULL; } - if (st->cur_skb->next) { - st->cur_skb = st->cur_skb->next; + if (st->root_skb == st->cur_skb && + skb_shinfo(st->root_skb)->frag_list) { + st->cur_skb = skb_shinfo(st->root_skb)->frag_list; st->frag_idx = 0; goto next_skb; - } else if (st->root_skb == st->cur_skb && - skb_shinfo(st->root_skb)->frag_list) { - st->cur_skb = skb_shinfo(st->root_skb)->frag_list; + } else if (st->cur_skb->next) { + st->cur_skb = st->cur_skb->next; st->frag_idx = 0; goto next_skb; } -- cgit v1.2.2 From 9d8dba6c979fa99c96938c869611b9a23b73efa9 Mon Sep 17 00:00:00 2001 From: Benjamin Zores Date: Thu, 29 Jan 2009 16:19:13 -0800 Subject: ipv4: fix infinite retry loop in IP-Config Signed-off-by: Benjamin Zores Signed-off-by: David S. Miller --- net/ipv4/ipconfig.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'net') diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c index 42a0f3dd3fd6..d722013c1cae 100644 --- a/net/ipv4/ipconfig.c +++ b/net/ipv4/ipconfig.c @@ -1268,6 +1268,9 @@ __be32 __init root_nfs_parse_addr(char *name) static int __init ip_auto_config(void) { __be32 addr; +#ifdef IPCONFIG_DYNAMIC + int retries = CONF_OPEN_RETRIES; +#endif #ifdef CONFIG_PROC_FS proc_net_fops_create(&init_net, "pnp", S_IRUGO, &pnp_seq_fops); @@ -1304,9 +1307,6 @@ static int __init ip_auto_config(void) #endif ic_first_dev->next) { #ifdef IPCONFIG_DYNAMIC - - int retries = CONF_OPEN_RETRIES; - if (ic_dynamic() < 0) { ic_close_devs(); -- cgit v1.2.2 From 1af7ad51049d6a310a19d497960597198290ddfa Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Thu, 29 Jan 2009 17:18:31 -0800 Subject: wimax: fix build issue when debugfs is disabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As reported by Toralf Förster and Randy Dunlap. - http://linuxwimax.org/pipermail/wimax/2009-January/000460.html - http://lkml.org/lkml/2009/1/29/279 The definitions needed for the wimax stack and i2400m driver debug infrastructure was, by mistake, compiled depending on CONFIG_DEBUG_FS (by them being placed in the debugfs.c files); thus the build broke in 2.6.29-rc3 when debugging was enabled (CONFIG_WIMAX_DEBUG) and DEBUG_FS was disabled. These definitions are always needed if debug is enabled at compile time (independently of DEBUG_FS being or not enabled), so moving them to a file that is always compiled fixes the issue. Signed-off-by: Inaky Perez-Gonzalez Signed-off-by: David S. Miller --- net/wimax/debugfs.c | 11 ----------- net/wimax/stack.c | 13 +++++++++++++ 2 files changed, 13 insertions(+), 11 deletions(-) (limited to 'net') diff --git a/net/wimax/debugfs.c b/net/wimax/debugfs.c index 87cf4430079c..94d216a46407 100644 --- a/net/wimax/debugfs.c +++ b/net/wimax/debugfs.c @@ -28,17 +28,6 @@ #include "debug-levels.h" -/* Debug framework control of debug levels */ -struct d_level D_LEVEL[] = { - D_SUBMODULE_DEFINE(debugfs), - D_SUBMODULE_DEFINE(id_table), - D_SUBMODULE_DEFINE(op_msg), - D_SUBMODULE_DEFINE(op_reset), - D_SUBMODULE_DEFINE(op_rfkill), - D_SUBMODULE_DEFINE(stack), -}; -size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL); - #define __debugfs_register(prefix, name, parent) \ do { \ result = d_level_register_debugfs(prefix, name, parent); \ diff --git a/net/wimax/stack.c b/net/wimax/stack.c index d4da92f8981a..3869c0327882 100644 --- a/net/wimax/stack.c +++ b/net/wimax/stack.c @@ -516,6 +516,19 @@ void wimax_dev_rm(struct wimax_dev *wimax_dev) } EXPORT_SYMBOL_GPL(wimax_dev_rm); + +/* Debug framework control of debug levels */ +struct d_level D_LEVEL[] = { + D_SUBMODULE_DEFINE(debugfs), + D_SUBMODULE_DEFINE(id_table), + D_SUBMODULE_DEFINE(op_msg), + D_SUBMODULE_DEFINE(op_reset), + D_SUBMODULE_DEFINE(op_rfkill), + D_SUBMODULE_DEFINE(stack), +}; +size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL); + + struct genl_family wimax_gnl_family = { .id = GENL_ID_GENERATE, .name = "WiMAX", -- cgit v1.2.2