From d6dc1a386358979e12366d1f35eeb68fc181e101 Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen Date: Tue, 23 Mar 2010 09:02:33 +0200 Subject: cfg80211: Add connection quality monitoring support to nl80211 Add support for basic configuration of a connection quality monitoring to the nl80211 interface, and basic support for notifying about triggered monitoring events. Via this interface a user-space connection manager may configure and receive pre-warning events of deteriorating WLAN connection quality, and start preparing for roaming in advance, before the connection is already lost. An example usage of such a trigger is starting scanning for nearby AP's in an attempt to find one with better connection quality, and associate to it before the connection characteristics of the existing connection become too bad or the association is even lost, leading in a prolonged delay in connectivity. The interface currently supports only RSSI, but it could be later extended to include other parameters, such as signal-to-noise ratio, if need for that arises. Signed-off-by: Juuso Oikarinen Reviewed-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/mlme.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'net/wireless/mlme.c') diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index 62bc8855e123..0855f0d32349 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -894,3 +894,16 @@ void cfg80211_action_tx_status(struct net_device *dev, u64 cookie, nl80211_send_action_tx_status(rdev, dev, cookie, buf, len, ack, gfp); } EXPORT_SYMBOL(cfg80211_action_tx_status); + +void cfg80211_cqm_rssi_notify(struct net_device *dev, + enum nl80211_cqm_rssi_threshold_event rssi_event, + gfp_t gfp) +{ + struct wireless_dev *wdev = dev->ieee80211_ptr; + struct wiphy *wiphy = wdev->wiphy; + struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); + + /* Indicate roaming trigger event to user space */ + nl80211_send_cqm_rssi_notify(rdev, dev, rssi_event, gfp); +} +EXPORT_SYMBOL(cfg80211_cqm_rssi_notify); -- cgit v1.2.2 From 5a0e3ad6af8660be21ca98a971cd00f331318c05 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 24 Mar 2010 17:04:11 +0900 Subject: include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn --- net/wireless/mlme.c | 1 + 1 file changed, 1 insertion(+) (limited to 'net/wireless/mlme.c') diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index 62bc8855e123..22139fa46115 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -8,6 +8,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.2 From d5cdfacb35ed886271d1ccfffbded98d3447da17 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Sun, 4 Apr 2010 09:37:19 +0300 Subject: cfg80211: Add local-state-change-only auth/deauth/disassoc cfg80211 is quite strict on allowing authentication and association commands only in certain states. In order to meet these requirements, user space applications may need to clear authentication or association state in some cases. Currently, this can be done with deauth/disassoc command, but that ends up sending out Deauthentication or Disassociation frame unnecessarily. Add a new nl80211 attribute to allow this sending of the frame be skipped, but with all other deauth/disassoc operations being completed. Similar state change is also needed for IEEE 802.11r FT protocol in the FT-over-DS case which does not use Authentication frame exchange in a transition to another BSS. For this to work with cfg80211, an authentication entry needs to be created for the target BSS without sending out an Authentication frame. The nl80211 authentication command can be used for this purpose, too, with the new attribute to indicate that the command is only for changing local state. This enables wpa_supplicant to complete FT-over-DS transition successfully. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- net/wireless/mlme.c | 39 ++++++++++++++++++++++++++++----------- 1 file changed, 28 insertions(+), 11 deletions(-) (limited to 'net/wireless/mlme.c') diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index 0855f0d32349..387dd2a27d2f 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -377,7 +377,8 @@ int __cfg80211_mlme_auth(struct cfg80211_registered_device *rdev, const u8 *bssid, const u8 *ssid, int ssid_len, const u8 *ie, int ie_len, - const u8 *key, int key_len, int key_idx) + const u8 *key, int key_len, int key_idx, + bool local_state_change) { struct wireless_dev *wdev = dev->ieee80211_ptr; struct cfg80211_auth_request req; @@ -407,6 +408,7 @@ int __cfg80211_mlme_auth(struct cfg80211_registered_device *rdev, memset(&req, 0, sizeof(req)); + req.local_state_change = local_state_change; req.ie = ie; req.ie_len = ie_len; req.auth_type = auth_type; @@ -433,12 +435,18 @@ int __cfg80211_mlme_auth(struct cfg80211_registered_device *rdev, goto out; } - wdev->authtry_bsses[slot] = bss; + if (local_state_change) + wdev->auth_bsses[slot] = bss; + else + wdev->authtry_bsses[slot] = bss; cfg80211_hold_bss(bss); err = rdev->ops->auth(&rdev->wiphy, dev, &req); if (err) { - wdev->authtry_bsses[slot] = NULL; + if (local_state_change) + wdev->auth_bsses[slot] = NULL; + else + wdev->authtry_bsses[slot] = NULL; cfg80211_unhold_bss(bss); } @@ -453,14 +461,15 @@ int cfg80211_mlme_auth(struct cfg80211_registered_device *rdev, enum nl80211_auth_type auth_type, const u8 *bssid, const u8 *ssid, int ssid_len, const u8 *ie, int ie_len, - const u8 *key, int key_len, int key_idx) + const u8 *key, int key_len, int key_idx, + bool local_state_change) { int err; wdev_lock(dev->ieee80211_ptr); err = __cfg80211_mlme_auth(rdev, dev, chan, auth_type, bssid, ssid, ssid_len, ie, ie_len, - key, key_len, key_idx); + key, key_len, key_idx, local_state_change); wdev_unlock(dev->ieee80211_ptr); return err; @@ -554,7 +563,8 @@ int cfg80211_mlme_assoc(struct cfg80211_registered_device *rdev, int __cfg80211_mlme_deauth(struct cfg80211_registered_device *rdev, struct net_device *dev, const u8 *bssid, - const u8 *ie, int ie_len, u16 reason) + const u8 *ie, int ie_len, u16 reason, + bool local_state_change) { struct wireless_dev *wdev = dev->ieee80211_ptr; struct cfg80211_deauth_request req; @@ -564,6 +574,7 @@ int __cfg80211_mlme_deauth(struct cfg80211_registered_device *rdev, memset(&req, 0, sizeof(req)); req.reason_code = reason; + req.local_state_change = local_state_change; req.ie = ie; req.ie_len = ie_len; if (wdev->current_bss && @@ -590,13 +601,15 @@ int __cfg80211_mlme_deauth(struct cfg80211_registered_device *rdev, int cfg80211_mlme_deauth(struct cfg80211_registered_device *rdev, struct net_device *dev, const u8 *bssid, - const u8 *ie, int ie_len, u16 reason) + const u8 *ie, int ie_len, u16 reason, + bool local_state_change) { struct wireless_dev *wdev = dev->ieee80211_ptr; int err; wdev_lock(wdev); - err = __cfg80211_mlme_deauth(rdev, dev, bssid, ie, ie_len, reason); + err = __cfg80211_mlme_deauth(rdev, dev, bssid, ie, ie_len, reason, + local_state_change); wdev_unlock(wdev); return err; @@ -604,7 +617,8 @@ int cfg80211_mlme_deauth(struct cfg80211_registered_device *rdev, static int __cfg80211_mlme_disassoc(struct cfg80211_registered_device *rdev, struct net_device *dev, const u8 *bssid, - const u8 *ie, int ie_len, u16 reason) + const u8 *ie, int ie_len, u16 reason, + bool local_state_change) { struct wireless_dev *wdev = dev->ieee80211_ptr; struct cfg80211_disassoc_request req; @@ -619,6 +633,7 @@ static int __cfg80211_mlme_disassoc(struct cfg80211_registered_device *rdev, memset(&req, 0, sizeof(req)); req.reason_code = reason; + req.local_state_change = local_state_change; req.ie = ie; req.ie_len = ie_len; if (memcmp(wdev->current_bss->pub.bssid, bssid, ETH_ALEN) == 0) @@ -631,13 +646,15 @@ static int __cfg80211_mlme_disassoc(struct cfg80211_registered_device *rdev, int cfg80211_mlme_disassoc(struct cfg80211_registered_device *rdev, struct net_device *dev, const u8 *bssid, - const u8 *ie, int ie_len, u16 reason) + const u8 *ie, int ie_len, u16 reason, + bool local_state_change) { struct wireless_dev *wdev = dev->ieee80211_ptr; int err; wdev_lock(wdev); - err = __cfg80211_mlme_disassoc(rdev, dev, bssid, ie, ie_len, reason); + err = __cfg80211_mlme_disassoc(rdev, dev, bssid, ie, ie_len, reason, + local_state_change); wdev_unlock(wdev); return err; -- cgit v1.2.2