From 2d3db210860f1df099a35b1dd54cca35454e0361 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Tue, 29 Oct 2013 18:11:59 -0400 Subject: Revert "mac80211: allow disable power save in mesh" This reverts commit ee1f668136b2fb6640ee2d54c2a525ea41f98211. The aformentioned commit added a check to allow 'iw wlan0 set power_save off' to work for mesh interfaces. However, this is problematic because it also allows 'iw wlan0 set power_save on', which will crash in short order because all of the subsequent code manipulates sdata->u.mgd. The power-saving states for mesh interfaces can be manipulated through the mesh config, e.g: 'iw wlan0 set mesh_param mesh_power_save=active' (which, despite the name, actualy disables power saving since the setting refers to the type of sleep the interface undergoes). Cc: stable@vger.kernel.org Fixes: ee1f668136b2 ("mac80211: allow disable power save in mesh") Signed-off-by: Bob Copeland Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 95667b088c5b..0ec245120a63 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2488,8 +2488,7 @@ static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev, struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - if (sdata->vif.type != NL80211_IFTYPE_STATION && - sdata->vif.type != NL80211_IFTYPE_MESH_POINT) + if (sdata->vif.type != NL80211_IFTYPE_STATION) return -EOPNOTSUPP; if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS)) -- cgit v1.2.2 From 84a3d1c97d024acd1d27ebbc10cb95784b11f4e7 Mon Sep 17 00:00:00 2001 From: Janusz Dziedzic Date: Tue, 5 Nov 2013 14:48:46 +0100 Subject: mac80211: DFS setup chandef for radar_event correctly Setup chandef for radar event correctly, before we will clear this in ieee80211_dfs_cac_cancel() function. Without this patch mac80211 will report wrong channel width in case we will get radar event during active CAC. Signed-off-by: Janusz Dziedzic Reviewed-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/mac80211/util.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 592a18171f95..e9ce36d32ef5 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -2278,17 +2278,15 @@ void ieee80211_dfs_radar_detected_work(struct work_struct *work) { struct ieee80211_local *local = container_of(work, struct ieee80211_local, radar_detected_work); - struct cfg80211_chan_def chandef; + struct cfg80211_chan_def chandef = local->hw.conf.chandef; ieee80211_dfs_cac_cancel(local); if (local->use_chanctx) /* currently not handled */ WARN_ON(1); - else { - chandef = local->hw.conf.chandef; + else cfg80211_radar_event(local->hw.wiphy, &chandef, GFP_KERNEL); - } } void ieee80211_radar_detected(struct ieee80211_hw *hw) -- cgit v1.2.2 From 18db594a1005d908d995a2fc8f5a7bf4286fdca0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 6 Nov 2013 10:34:36 +0100 Subject: mac80211: fix scheduled scan rtnl deadlock When changing cfg80211 to use RTNL locking, this caused a deadlock in mac80211 as it calls cfg80211_sched_scan_stopped() from a work item that's on a workqueue that is flushed with the RTNL held. Fix this by simply using schedule_work(), the work only needs to finish running before the wiphy is unregistered, no other synchronisation (e.g. with suspend) is really required since for suspend userspace is already blocked anyway when we flush the workqueue so will only pick up the event after resume. Cc: stable@vger.kernel.org Fixes: 5fe231e87372 ("cfg80211: vastly simplify locking") Reported-and-tested-by: Eliad Peller Signed-off-by: Johannes Berg --- net/mac80211/main.c | 1 + net/mac80211/scan.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'net/mac80211') diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 21d5d44444d0..e765f77bb97a 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -1047,6 +1047,7 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw) cancel_work_sync(&local->restart_work); cancel_work_sync(&local->reconfig_filter); + flush_work(&local->sched_scan_stopped_work); ieee80211_clear_tx_pending(local); rate_control_deinitialize(local); diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 5ad66a83ef7f..bcc4833d7542 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -1088,6 +1088,6 @@ void ieee80211_sched_scan_stopped(struct ieee80211_hw *hw) trace_api_sched_scan_stopped(local); - ieee80211_queue_work(&local->hw, &local->sched_scan_stopped_work); + schedule_work(&local->sched_scan_stopped_work); } EXPORT_SYMBOL(ieee80211_sched_scan_stopped); -- cgit v1.2.2 From 57fb089f480d199e4275da086d407b978de67214 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 8 Nov 2013 17:31:37 +0100 Subject: mac80211: fix crash when using AP VLAN interfaces Commit "mac80211: implement SMPS for AP" applies to AP_VLAN as well. It assumes that sta->sdata->vif.bss_conf.bssid is present, which did not get set for AP_VLAN. Initialize it to sdata->vif.addr like for other interface types. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 1 - 1 file changed, 1 deletion(-) (limited to 'net/mac80211') diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index ff101ea1d9ae..36c3a4cbcabf 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1325,7 +1325,6 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata, sdata->vif.bss_conf.bssid = NULL; break; case NL80211_IFTYPE_AP_VLAN: - break; case NL80211_IFTYPE_P2P_DEVICE: sdata->vif.bss_conf.bssid = sdata->vif.addr; break; -- cgit v1.2.2 From 6c751ef8a1a15d633cd755eafa86ede9c32b2617 Mon Sep 17 00:00:00 2001 From: Javier Lopez Date: Wed, 6 Nov 2013 10:04:29 -0800 Subject: mac80211: fix for mesh beacon update on powersave Mesh beacon was not being rebuild after user triggered a mesh powersave change. To solve this issue use ieee80211_mbss_info_change_notify instead of ieee80211_bss_info_change_notify. This helper function forces mesh beacon to be rebuild and then notifies the driver about the beacon change. Signed-off-by: Javier Lopez Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net/mac80211') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 0ec245120a63..9e7e68d7b1a7 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1368,7 +1368,7 @@ static int sta_apply_parameters(struct ieee80211_local *local, changed |= ieee80211_mps_set_sta_local_pm(sta, params->local_pm); - ieee80211_bss_info_change_notify(sdata, changed); + ieee80211_mbss_info_change_notify(sdata, changed); #endif } -- cgit v1.2.2 From 351df099721e02e1a25a498268e52c0378c0e272 Mon Sep 17 00:00:00 2001 From: Karl Beldan Date: Wed, 13 Nov 2013 23:07:07 +0100 Subject: mac80211: minstrel_ht: fix rates selection When initializing rates selections starting indexes upon stats update, the minstrel_sta->max_* rates should be 'group * MCS_GROUP_RATES + i' not 'i'. This affects settings where one of the peers does not support any of the rates of the group 0 (i.e. when ht_cap.mcs.rx_mask[0] == 0). Signed-off-by: Karl Beldan Acked-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/rc80211_minstrel_ht.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 5d60779a0c1b..47aa6f81566b 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -277,13 +277,15 @@ minstrel_ht_update_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi) if (!(mg->supported & BIT(i))) continue; + index = MCS_GROUP_RATES * group + i; + /* initialize rates selections starting indexes */ if (!mg_rates_valid) { mg->max_tp_rate = mg->max_tp_rate2 = mg->max_prob_rate = i; if (!mi_rates_valid) { mi->max_tp_rate = mi->max_tp_rate2 = - mi->max_prob_rate = i; + mi->max_prob_rate = index; mi_rates_valid = true; } mg_rates_valid = true; @@ -291,7 +293,6 @@ minstrel_ht_update_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi) mr = &mg->rates[i]; mr->retry_updated = false; - index = MCS_GROUP_RATES * group + i; minstrel_calc_rate_ewma(mr); minstrel_ht_calc_tp(mi, group, i); -- cgit v1.2.2 From 051a41fa4ee14f5c39668f0980973b9a195de560 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 20 Nov 2013 11:28:27 +0100 Subject: mac80211: don't attempt to reorder multicast frames Multicast frames can't be transmitted as part of an aggregation session (such a session couldn't even be set up) so don't try to reorder them. Trying to do so would cause the reorder to stop working correctly since multicast QoS frames (as transmitted by the Aruba APs this was found with) would cause sequence number confusion in the buffer. Cc: stable@vger.kernel.org Reported-by: Blaise Gassend Signed-off-by: Johannes Berg --- net/mac80211/rx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'net/mac80211') diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index caecef870c0e..2b0debb0422b 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -911,7 +911,8 @@ static void ieee80211_rx_reorder_ampdu(struct ieee80211_rx_data *rx, u16 sc; u8 tid, ack_policy; - if (!ieee80211_is_data_qos(hdr->frame_control)) + if (!ieee80211_is_data_qos(hdr->frame_control) || + is_multicast_ether_addr(hdr->addr1)) goto dont_reorder; /* -- cgit v1.2.2 From 3f718fd8401d7db86b9efc3ea1cdf5df41354b9f Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Fri, 8 Nov 2013 15:09:43 +0800 Subject: mac80211: fix the mesh channel switch support Mesh STA receiving the mesh CSA action frame is not able to trigger the mesh channel switch due to the incorrect handling and comparison of mesh channel switch parameters element (MCSP)'s TTL. Make sure the MCSP's TTL is updated accordingly before calling the ieee80211_mesh_process_chnswitch. Also, we update the beacon before forwarding the CSA action frame, so MCSP's precedence value and initiator flag need to be updated prior to this. Signed-off-by: Chun-Yeow Yeoh Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 10 +++++++++- net/mac80211/ieee80211_i.h | 1 + net/mac80211/mesh.c | 20 ++++++++++++-------- net/mac80211/spectmgmt.c | 2 ++ net/mac80211/util.c | 5 ----- 5 files changed, 24 insertions(+), 14 deletions(-) (limited to 'net/mac80211') diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 9e7e68d7b1a7..364ce0c5962f 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -3119,9 +3119,17 @@ static int ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev, params->chandef.chan->band) return -EINVAL; + ifmsh->chsw_init = true; + if (!ifmsh->pre_value) + ifmsh->pre_value = 1; + else + ifmsh->pre_value++; + err = ieee80211_mesh_csa_beacon(sdata, params, true); - if (err < 0) + if (err < 0) { + ifmsh->chsw_init = false; return err; + } break; #endif default: diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 29dc505be125..4aea4e791113 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1228,6 +1228,7 @@ struct ieee80211_csa_ie { u8 mode; u8 count; u8 ttl; + u16 pre_value; }; /* Parsed Information Elements */ diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 896fe3bd599e..ba105257d03f 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -943,14 +943,19 @@ ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata, params.chandef.chan->center_freq); params.block_tx = csa_ie.mode & WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT; - if (beacon) + if (beacon) { ifmsh->chsw_ttl = csa_ie.ttl - 1; - else - ifmsh->chsw_ttl = 0; + if (ifmsh->pre_value >= csa_ie.pre_value) + return false; + ifmsh->pre_value = csa_ie.pre_value; + } - if (ifmsh->chsw_ttl > 0) + if (ifmsh->chsw_ttl < ifmsh->mshcfg.dot11MeshTTL) { if (ieee80211_mesh_csa_beacon(sdata, ¶ms, false) < 0) return false; + } else { + return false; + } sdata->csa_radar_required = params.radar_required; @@ -1163,7 +1168,6 @@ static int mesh_fwd_csa_frame(struct ieee80211_sub_if_data *sdata, offset_ttl = (len < 42) ? 7 : 10; *(pos + offset_ttl) -= 1; *(pos + offset_ttl + 1) &= ~WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR; - sdata->u.mesh.chsw_ttl = *(pos + offset_ttl); memcpy(mgmt_fwd, mgmt, len); eth_broadcast_addr(mgmt_fwd->da); @@ -1182,7 +1186,7 @@ static void mesh_rx_csa_frame(struct ieee80211_sub_if_data *sdata, u16 pre_value; bool fwd_csa = true; size_t baselen; - u8 *pos, ttl; + u8 *pos; if (mgmt->u.action.u.measurement.action_code != WLAN_ACTION_SPCT_CHL_SWITCH) @@ -1193,8 +1197,8 @@ static void mesh_rx_csa_frame(struct ieee80211_sub_if_data *sdata, u.action.u.chan_switch.variable); ieee802_11_parse_elems(pos, len - baselen, false, &elems); - ttl = elems.mesh_chansw_params_ie->mesh_ttl; - if (!--ttl) + ifmsh->chsw_ttl = elems.mesh_chansw_params_ie->mesh_ttl; + if (!--ifmsh->chsw_ttl) fwd_csa = false; pre_value = le16_to_cpu(elems.mesh_chansw_params_ie->mesh_pre_value); diff --git a/net/mac80211/spectmgmt.c b/net/mac80211/spectmgmt.c index a40da20b32e0..6ab009070084 100644 --- a/net/mac80211/spectmgmt.c +++ b/net/mac80211/spectmgmt.c @@ -78,6 +78,8 @@ int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata, if (elems->mesh_chansw_params_ie) { csa_ie->ttl = elems->mesh_chansw_params_ie->mesh_ttl; csa_ie->mode = elems->mesh_chansw_params_ie->mesh_flags; + csa_ie->pre_value = le16_to_cpu( + elems->mesh_chansw_params_ie->mesh_pre_value); } new_freq = ieee80211_channel_to_frequency(new_chan_no, new_band); diff --git a/net/mac80211/util.c b/net/mac80211/util.c index e9ce36d32ef5..9f9b9bd3fd44 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -2457,14 +2457,9 @@ int ieee80211_send_action_csa(struct ieee80211_sub_if_data *sdata, WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT : 0x00; put_unaligned_le16(WLAN_REASON_MESH_CHAN, pos); /* Reason Cd */ pos += 2; - if (!ifmsh->pre_value) - ifmsh->pre_value = 1; - else - ifmsh->pre_value++; pre_value = cpu_to_le16(ifmsh->pre_value); memcpy(pos, &pre_value, 2); /* Precedence Value */ pos += 2; - ifmsh->chsw_init = true; } ieee80211_tx_skb(sdata, skb); -- cgit v1.2.2 From 12b5f34d2d5934e998975bbae4e29f81d94052f6 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Mon, 18 Nov 2013 19:06:46 +0200 Subject: mac80211: fix connection polling Commit 392b9ff ("mac80211: change beacon/connection polling") removed the IEEE80211_STA_BEACON_POLL flag. However, it accidentally removed the setting of IEEE80211_STA_CONNECTION_POLL, making the connection polling completely useless (the flag is always clear, so the result is never being checked). Fix it. Signed-off-by: Eliad Peller Acked-by: Stanislaw Gruszka Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'net/mac80211') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index d7504ab61a34..b3a3ce316656 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1910,6 +1910,8 @@ static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata, if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) already = true; + ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL; + mutex_unlock(&sdata->local->mtx); if (already) -- cgit v1.2.2 From 5664da4429c177495256f958194c241625074ec0 Mon Sep 17 00:00:00 2001 From: Karl Beldan Date: Wed, 20 Nov 2013 19:13:35 +0100 Subject: mac80211: use capped prob when computing throughputs Commit 3e8b1eb "mac80211/minstrel_ht: improve rate selection stability" introduced a local capped prob in minstrel_ht_calc_tp but omitted to use it to compute the per rate throughput. Signed-off-by: Karl Beldan Cc: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/rc80211_minstrel_ht.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net/mac80211') diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 47aa6f81566b..4096ff6cc24f 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -226,7 +226,7 @@ minstrel_ht_calc_tp(struct minstrel_ht_sta *mi, int group, int rate) nsecs = 1000 * mi->overhead / MINSTREL_TRUNC(mi->avg_ampdu_len); nsecs += minstrel_mcs_groups[group].duration[rate]; - tp = 1000000 * ((mr->probability * 1000) / nsecs); + tp = 1000000 * ((prob * 1000) / nsecs); mr->cur_tp = MINSTREL_TRUNC(tp); } -- cgit v1.2.2 From 24d47300d118c5909a51b7270276d749cce150a2 Mon Sep 17 00:00:00 2001 From: Karl Beldan Date: Tue, 19 Nov 2013 17:12:05 +0100 Subject: mac80211: set hw initial idle state ATM, the first call of ieee80211_do_open will configure the hw as non-idle, even if the interface being brought up is not a monitor, and this leads to inconsistent sequences like: register_hw() do_open(sta) hw_config(non-idle) (.. sta is non-idle ..) scan(sta) hw_config(idle) (after scan finishes) do_stop(sta) do_open(sta) (.. sta is idle ..) Signed-off-by: Karl Beldan Signed-off-by: Johannes Berg --- net/mac80211/main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'net/mac80211') diff --git a/net/mac80211/main.c b/net/mac80211/main.c index e765f77bb97a..7d1c3ac48ed9 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -940,6 +940,8 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) wiphy_debug(local->hw.wiphy, "Failed to initialize wep: %d\n", result); + local->hw.conf.flags = IEEE80211_CONF_IDLE; + ieee80211_led_init(local); rtnl_lock(); -- cgit v1.2.2 From 0834ae3c3af44480834cce128b6fef83006e537f Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Tue, 26 Nov 2013 16:45:18 +0100 Subject: mac80211: check csa wiphy flag in ibss before switching When external CSA IEs are received (beacons or action messages), a channel switch is triggered as well. This should only be allowed on devices which actually support channel switches, otherwise disconnect. (For the corresponding userspace invocation, the wiphy flag is checked in nl80211). Signed-off-by: Simon Wunderlich Signed-off-by: Johannes Berg --- net/mac80211/ibss.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'net/mac80211') diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 531be040b9ae..27a39de89679 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -823,6 +823,10 @@ ieee80211_ibss_process_chanswitch(struct ieee80211_sub_if_data *sdata, if (err) return false; + /* channel switch is not supported, disconnect */ + if (!(sdata->local->hw.wiphy->flags & WIPHY_FLAG_HAS_CHANNEL_SWITCH)) + goto disconnect; + params.count = csa_ie.count; params.chandef = csa_ie.chandef; -- cgit v1.2.2