From f14543ee4d0681df1377b976cba704557ba220d3 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 10 Nov 2009 20:10:05 +0100 Subject: mac80211: implement support for 4-address frames for AP and client mode In some situations it might be useful to run a network with an Access Point and multiple clients, but with each client bridged to a network behind it. For this to work, both the client and the AP need to transmit 4-address frames, containing both source and destination MAC addresses. With this patch, you can configure a client to communicate using only 4-address frames for data traffic. On the AP side you can enable 4-address frames for individual clients by isolating them in separate AP VLANs which are configured in 4-address mode. Such an AP VLAN will be limited to one client only, and this client will be used as the destination for all traffic on its interface, regardless of the destination MAC address in the packet headers. The advantage of this mode compared to regular WDS mode is that it's easier to configure and does not require a static list of peer MAC addresses on any side. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- net/mac80211/rx.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'net/mac80211/rx.c') diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 4066570dd414..76478362a538 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1181,6 +1181,13 @@ __ieee80211_data_to_8023(struct ieee80211_rx_data *rx) { struct net_device *dev = rx->dev; struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data; + + if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN && !sdata->use_4addr && + ieee80211_has_a4(hdr->frame_control)) + return -1; + if (sdata->use_4addr && is_multicast_ether_addr(hdr->addr1)) + return -1; return ieee80211_data_to_8023(rx->skb, dev->dev_addr, sdata->vif.type); } @@ -1534,6 +1541,7 @@ ieee80211_rx_h_data(struct ieee80211_rx_data *rx) { struct net_device *dev = rx->dev; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data; + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); __le16 fc = hdr->frame_control; int err; @@ -1543,6 +1551,14 @@ ieee80211_rx_h_data(struct ieee80211_rx_data *rx) if (unlikely(!ieee80211_is_data_present(hdr->frame_control))) return RX_DROP_MONITOR; + /* + * Allow the cooked monitor interface of an AP to see 4-addr frames so + * that a 4-addr station can be detected and moved into a separate VLAN + */ + if (ieee80211_has_a4(hdr->frame_control) && + sdata->vif.type == NL80211_IFTYPE_AP) + return RX_DROP_MONITOR; + err = __ieee80211_data_to_8023(rx); if (unlikely(err)) return RX_DROP_UNUSABLE; @@ -1983,7 +1999,7 @@ static int prepare_for_handlers(struct ieee80211_sub_if_data *sdata, switch (sdata->vif.type) { case NL80211_IFTYPE_STATION: - if (!bssid) + if (!bssid && !sdata->use_4addr) return 0; if (!multicast && compare_ether_addr(sdata->dev->dev_addr, hdr->addr1) != 0) { -- cgit v1.2.2