From 3434fbd39862d471c92b66c28cd449deea8e9f90 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 3 May 2008 00:59:37 +0200 Subject: mac80211: require four hardware queues for QoS/HT This patch makes mac80211 only announce QoS/HT support when the underlying hardware has four (or more) queues. Signed-off-by: Johannes Berg Cc: Ron Rindjunksi Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) (limited to 'net/mac80211/mlme.c') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 55b85ae5bc11..108c6fc42fe2 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -272,6 +272,12 @@ static void ieee80211_sta_wmm_params(struct net_device *dev, int count; u8 *pos; + if (!(ifsta->flags & IEEE80211_STA_WMM_ENABLED)) + return; + + if (!wmm_param) + return; + if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1) return; count = wmm_param[6] & 0x0f; @@ -763,8 +769,10 @@ static void ieee80211_send_assoc(struct net_device *dev, *pos++ = 1; /* WME ver */ *pos++ = 0; } + /* wmm support is a must to HT */ - if (wmm && sband->ht_info.ht_supported) { + if (wmm && (ifsta->flags & IEEE80211_STA_WMM_ENABLED) && + sband->ht_info.ht_supported) { __le16 tmp = cpu_to_le16(sband->ht_info.cap); pos = skb_put(skb, sizeof(struct ieee80211_ht_cap)+2); *pos++ = WLAN_EID_HT_CAPABILITY; @@ -2021,7 +2029,8 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, else sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE; - if (elems.ht_cap_elem && elems.ht_info_elem && elems.wmm_param) { + if (elems.ht_cap_elem && elems.ht_info_elem && elems.wmm_param && + (ifsta->flags & IEEE80211_STA_WMM_ENABLED)) { struct ieee80211_ht_bss_info bss_info; ieee80211_ht_cap_ie_to_ht_info( (struct ieee80211_ht_cap *) @@ -2034,7 +2043,7 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, rate_control_rate_init(sta, local); - if (elems.wmm_param && (ifsta->flags & IEEE80211_STA_WMM_ENABLED)) { + if (elems.wmm_param) { sta->flags |= WLAN_STA_WME; rcu_read_unlock(); ieee80211_sta_wmm_params(dev, ifsta, elems.wmm_param, @@ -2817,10 +2826,8 @@ static void ieee80211_rx_mgmt_beacon(struct net_device *dev, ieee802_11_parse_elems(mgmt->u.beacon.variable, len - baselen, &elems); - if (elems.wmm_param && (ifsta->flags & IEEE80211_STA_WMM_ENABLED)) { - ieee80211_sta_wmm_params(dev, ifsta, elems.wmm_param, - elems.wmm_param_len); - } + ieee80211_sta_wmm_params(dev, ifsta, elems.wmm_param, + elems.wmm_param_len); /* Do not send changes to driver if we are scanning. This removes * requirement that driver's bss_info_changed function needs to be -- cgit v1.2.2 From 07346f81e87d6e4cca7ae9adfa711d0c61c87b56 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 3 May 2008 01:02:02 +0200 Subject: mac80211: proper STA info locking As discussed earlier, we can unify locking in struct sta_info and use just a single spinlock protecting all members of the structure that need protection. Many don't, but one of the especially bad ones is the 'flags' member that can currently be clobbered when RX and TX is being processed on different CPUs at the same time. Because having four spinlocks for different, mostly exclusive parts of a single structure is overkill, this patch also kills the ampdu and mesh plink spinlocks and uses just a single one for everything. Because none of the spinlocks are nested, this is safe. It remains to be seen whether or not we should make the sta flags use atomic bit operations instead, for now though this is a safe thing and using atomic operations instead will be very simple using the new static inline functions this patch introduces for accessing sta->flags. Since spin_lock_bh() is used with this lock, there shouldn't be any contention even if aggregation is enabled at around the same time as both requires frame transmission/reception which is in a bh context. Signed-off-by: Johannes Berg Cc: Tomas Winkler Cc: Ron Rindjunsky Cc: Luis Carlos Cobo Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 38 +++++++++++++++++++------------------- 1 file changed, 19 insertions(+), 19 deletions(-) (limited to 'net/mac80211/mlme.c') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 108c6fc42fe2..6c4b27be35da 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1241,7 +1241,7 @@ static void ieee80211_sta_process_addba_request(struct net_device *dev, /* examine state machine */ - spin_lock_bh(&sta->ampdu_mlme.ampdu_rx); + spin_lock_bh(&sta->lock); if (sta->ampdu_mlme.tid_state_rx[tid] != HT_AGG_STATE_IDLE) { #ifdef CONFIG_MAC80211_HT_DEBUG @@ -1308,7 +1308,7 @@ static void ieee80211_sta_process_addba_request(struct net_device *dev, tid_agg_rx->stored_mpdu_num = 0; status = WLAN_STATUS_SUCCESS; end: - spin_unlock_bh(&sta->ampdu_mlme.ampdu_rx); + spin_unlock_bh(&sta->lock); end_no_lock: ieee80211_send_addba_resp(sta->sdata->dev, sta->addr, tid, @@ -1340,10 +1340,10 @@ static void ieee80211_sta_process_addba_resp(struct net_device *dev, state = &sta->ampdu_mlme.tid_state_tx[tid]; - spin_lock_bh(&sta->ampdu_mlme.ampdu_tx); + spin_lock_bh(&sta->lock); if (!(*state & HT_ADDBA_REQUESTED_MSK)) { - spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx); + spin_unlock_bh(&sta->lock); printk(KERN_DEBUG "state not HT_ADDBA_REQUESTED_MSK:" "%d\n", *state); goto addba_resp_exit; @@ -1351,7 +1351,7 @@ static void ieee80211_sta_process_addba_resp(struct net_device *dev, if (mgmt->u.action.u.addba_resp.dialog_token != sta->ampdu_mlme.tid_tx[tid]->dialog_token) { - spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx); + spin_unlock_bh(&sta->lock); #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "wrong addBA response token, tid %d\n", tid); #endif /* CONFIG_MAC80211_HT_DEBUG */ @@ -1375,7 +1375,7 @@ static void ieee80211_sta_process_addba_resp(struct net_device *dev, ieee80211_wake_queue(hw, sta->tid_to_tx_q[tid]); } - spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx); + spin_unlock_bh(&sta->lock); printk(KERN_DEBUG "recipient accepted agg: tid %d \n", tid); } else { printk(KERN_DEBUG "recipient rejected agg: tid %d \n", tid); @@ -1383,7 +1383,7 @@ static void ieee80211_sta_process_addba_resp(struct net_device *dev, sta->ampdu_mlme.addba_req_num[tid]++; /* this will allow the state check in stop_BA_session */ *state = HT_AGG_STATE_OPERATIONAL; - spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx); + spin_unlock_bh(&sta->lock); ieee80211_stop_tx_ba_session(hw, sta->addr, tid, WLAN_BACK_INITIATOR); } @@ -1453,17 +1453,17 @@ void ieee80211_sta_stop_rx_ba_session(struct net_device *dev, u8 *ra, u16 tid, } /* check if TID is in operational state */ - spin_lock_bh(&sta->ampdu_mlme.ampdu_rx); + spin_lock_bh(&sta->lock); if (sta->ampdu_mlme.tid_state_rx[tid] != HT_AGG_STATE_OPERATIONAL) { - spin_unlock_bh(&sta->ampdu_mlme.ampdu_rx); + spin_unlock_bh(&sta->lock); rcu_read_unlock(); return; } sta->ampdu_mlme.tid_state_rx[tid] = HT_AGG_STATE_REQ_STOP_BA_MSK | (initiator << HT_AGG_STATE_INITIATOR_SHIFT); - spin_unlock_bh(&sta->ampdu_mlme.ampdu_rx); + spin_unlock_bh(&sta->lock); /* stop HW Rx aggregation. ampdu_action existence * already verified in session init so we add the BUG_ON */ @@ -1540,10 +1540,10 @@ static void ieee80211_sta_process_delba(struct net_device *dev, ieee80211_sta_stop_rx_ba_session(dev, sta->addr, tid, WLAN_BACK_INITIATOR, 0); else { /* WLAN_BACK_RECIPIENT */ - spin_lock_bh(&sta->ampdu_mlme.ampdu_tx); + spin_lock_bh(&sta->lock); sta->ampdu_mlme.tid_state_tx[tid] = HT_AGG_STATE_OPERATIONAL; - spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx); + spin_unlock_bh(&sta->lock); ieee80211_stop_tx_ba_session(&local->hw, sta->addr, tid, WLAN_BACK_RECIPIENT); } @@ -1580,9 +1580,9 @@ void sta_addba_resp_timer_expired(unsigned long data) state = &sta->ampdu_mlme.tid_state_tx[tid]; /* check if the TID waits for addBA response */ - spin_lock_bh(&sta->ampdu_mlme.ampdu_tx); + spin_lock_bh(&sta->lock); if (!(*state & HT_ADDBA_REQUESTED_MSK)) { - spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx); + spin_unlock_bh(&sta->lock); *state = HT_AGG_STATE_IDLE; printk(KERN_DEBUG "timer expired on tid %d but we are not " "expecting addBA response there", tid); @@ -1593,7 +1593,7 @@ void sta_addba_resp_timer_expired(unsigned long data) /* go through the state check in stop_BA_session */ *state = HT_AGG_STATE_OPERATIONAL; - spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx); + spin_unlock_bh(&sta->lock); ieee80211_stop_tx_ba_session(hw, temp_sta->addr, tid, WLAN_BACK_INITIATOR); @@ -1984,8 +1984,8 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, * to between the sta_info_alloc() and sta_info_insert() above. */ - sta->flags |= WLAN_STA_AUTH | WLAN_STA_ASSOC | WLAN_STA_ASSOC_AP | - WLAN_STA_AUTHORIZED; + set_sta_flags(sta, WLAN_STA_AUTH | WLAN_STA_ASSOC | WLAN_STA_ASSOC_AP | + WLAN_STA_AUTHORIZED); rates = 0; basic_rates = 0; @@ -2044,7 +2044,7 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, rate_control_rate_init(sta, local); if (elems.wmm_param) { - sta->flags |= WLAN_STA_WME; + set_sta_flags(sta, WLAN_STA_WME); rcu_read_unlock(); ieee80211_sta_wmm_params(dev, ifsta, elems.wmm_param, elems.wmm_param_len); @@ -4237,7 +4237,7 @@ struct sta_info *ieee80211_ibss_add_sta(struct net_device *dev, if (!sta) return NULL; - sta->flags |= WLAN_STA_AUTHORIZED; + set_sta_flags(sta, WLAN_STA_AUTHORIZED); sta->supp_rates[local->hw.conf.channel->band] = sdata->u.sta.supp_rates_bits[local->hw.conf.channel->band]; -- cgit v1.2.2 From 566bfe5a8bcde13188a356f77666f8115813cf31 Mon Sep 17 00:00:00 2001 From: Bruno Randolf Date: Thu, 8 May 2008 19:15:40 +0200 Subject: mac80211: use hardware flags for signal/noise units trying to clean up the signal/noise code. the previous code in mac80211 had confusing names for the related variables, did not have much definition of what units of signal and noise were provided and used implicit mechanisms from the wireless extensions. this patch introduces hardware capability flags to let the hardware specify clearly if it can provide signal and noise level values and which units it can provide. this also anticipates possible new units like RCPI in the future. for signal: IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW for noise we currently only have dBm: IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has to provide the maximum value (max_signal) it reports in order for applications to make sense of the signal values. i tried my best to find out for each driver what it can provide and update it but i'm not sure (?) for some of them and used the more conservative guess in doubt. this can be fixed easily after this patch has been merged by changing the hardware flags of the driver. DRIVER SIGNAL MAX NOISE QUAL ----------------------------------------------------------------- adm8211 unspec(?) 100 n/a missing at76_usb unspec(?) (?) unused missing ath5k dBm dBm percent rssi b43legacy dBm dBm percent jssi(?) b43 dBm dBm percent jssi(?) iwl-3945 dBm dBm percent snr+more iwl-4965 dBm dBm percent snr+more p54 unspec 127 n/a missing rt2x00 dBm n/a percent rssi+tx/rx frame success rt2400 dBm n/a rt2500pci dBm n/a rt2500usb dBm n/a rt61pci dBm n/a rt73usb dBm n/a rtl8180 unspec(?) 65 n/a (?) rtl8187 unspec(?) 65 (?) noise(?) zd1211 dB(?) 100 n/a percent drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'net/mac80211/mlme.c') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 6c4b27be35da..dda30e98aa1e 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1959,8 +1959,8 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, local->hw.conf.channel->center_freq, ifsta->ssid, ifsta->ssid_len); if (bss) { - sta->last_rssi = bss->rssi; sta->last_signal = bss->signal; + sta->last_qual = bss->qual; sta->last_noise = bss->noise; ieee80211_rx_bss_put(dev, bss); } @@ -2629,9 +2629,9 @@ static void ieee80211_rx_bss_info(struct net_device *dev, bss->timestamp = beacon_timestamp; bss->last_update = jiffies; - bss->rssi = rx_status->ssi; bss->signal = rx_status->signal; bss->noise = rx_status->noise; + bss->qual = rx_status->qual; if (!beacon && !bss->probe_resp) bss->probe_resp = true; @@ -3427,9 +3427,9 @@ static int ieee80211_sta_config_auth(struct net_device *dev, !ieee80211_sta_match_ssid(ifsta, bss->ssid, bss->ssid_len)) continue; - if (!selected || top_rssi < bss->rssi) { + if (!selected || top_rssi < bss->signal) { selected = bss; - top_rssi = bss->rssi; + top_rssi = bss->signal; } } if (selected) @@ -4060,8 +4060,8 @@ ieee80211_sta_scan_result(struct net_device *dev, memset(&iwe, 0, sizeof(iwe)); iwe.cmd = IWEVQUAL; - iwe.u.qual.qual = bss->signal; - iwe.u.qual.level = bss->rssi; + iwe.u.qual.qual = bss->qual; + iwe.u.qual.level = bss->signal; iwe.u.qual.noise = bss->noise; iwe.u.qual.updated = local->wstats_flags; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, -- cgit v1.2.2